PIC32MZ1024EFH100-E/GJX - 200MHz 1MB Flash MCU | Microchip
부품 번호: PIC32MZ1024EFH100-E/GJX ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $11.2 | $11.20 |
| 10 | $10.4 | $104.00 |
| 100 | $9.3 | $930.00 |
| 500 | $8.45 | $4,225.00 |
| 1,000 | $7.65 | $7,650.00 |
PIC32MZ1024EFH100-E/GJX 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO into one IC. Within the broader semiconductor taxonomy, MCUs sit under microprocessors -> processing units -> logic ICs -> integrated circuits. The PIC32MZ EF family specifically targets high-performance embedded connectivity applications requiring FPU-accelerated DSP and real-time deterministic behavior.
Key features include a hardware Floating Point Unit (IEEE 754-compliant) for fast single/double-precision math, four 64-bit accumulators with single-cycle MAC, saturating and fractional arithmetic, dual-panel Flash for live field updates without downtime, and a 12-bit 18 MSPS ADC. The device integrates dedicated peripherals for connectivity: USB 2.0 high-speed with PHY, dual CAN 2.0b controllers, Ethernet MAC with RMII/MII, multiple UART/SPI/I2C, and a parallel master port for external memory or graphics TFTs.
Technically, the PIC32MZ EF core is built on the MIPS Warrior M-class architecture, providing 5-stage pipeline execution with DSP extensions. The dual-panel Flash architecture allows simultaneous read-while-write operations and over-the-air firmware upgrades - a critical feature for deployed IoT and industrial nodes. The integrated FPU eliminates software emulation overhead, enabling high-speed sensor fusion and audio processing.
Typical applications include industrial automation controllers, automotive body and infotainment modules, IoT edge gateways with Ethernet/USB connectivity, graphics HMI touch panels, and motor control drives. The wide operating temperature range and dual-panel Flash make it well-suited for industrial sensor hubs and connected machinery.
When designing with this MCU, allocate decoupling capacitors close to each VDD/VSS pair, use the trace impedance guidelines from the PIC32MZ EF family datasheet, and validate the JTAG/ICSP programming interface layout. For Ethernet applications, the integrated RMII PHY interface requires careful length-matched routing.
This page synthesizes distributor pricing across six channels, drop-in alternatives, and design notes that complement the manufacturer datasheet - including parametric proximity scoring unavailable elsewhere.
드롭인 대체품: PIC32MZ1024EFH100-E/GJX — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MZ1024EFH100-E/GJX (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, Core Architecture, ADC, Operating Voltage.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MZ1024EFH100-I/GJX
✅ 드롭인✓ 재고 있음
$7.12 / 개
데이터시트 보기 →PIC32MZ1024EFH100T-E/GJX
✅ 드롭인✓ 재고 있음
$9.9 / 개
데이터시트 보기 →PIC32MZ2048EFH100-E/GJX
✅ 드롭인✓ 재고 있음
$11.2 / 개
데이터시트 보기 →PIC32MZ1024EFF100-E/GJX
✅ 드롭인✓ 재고 있음
$7.75 / 개
데이터시트 보기 →PIC32MZ1024EFG100-I/GJX
✅ 드롭인✓ 재고 있음
$12.5 / 개
데이터시트 보기 →PIC32MZ1024EFE100-E/GJX
✅ 드롭인✓ 재고 있음
$5.38 / 개
데이터시트 보기 →PIC32MZ1024EFH100-E/GJX 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M-Class (Warrior M-class) |
| Core Speed | 200 MHz |
| DMIPS | 330 DMIPS |
| Program Flash | 1 MB (1M x 8) |
| SRAM | 512 KB |
| FPU | IEEE 754-compliant single/double precision |
| DSP | Four 64-bit accumulators, single-cycle MAC |
| ADC | 12-bit, up to 18 MSPS |
| Operating Voltage | 2.1 V to 3.6 V |
| 동작 온도 | -40C to +125C (extended, -E suffix) |
| 패키지 | 100-pin TFBGA (7x7 mm) |
| 실장 유형 | Surface Mount |
| USB | USB 2.0 High-Speed with on-chip PHY |
| CAN | 2 x CAN 2.0b |
| Ethernet | 10/100 Mbps MAC with RMII/MII |
| AEC-Q100 | Automotive-grade qualified |
| RoHS 상태 | Compliant |
PIC32MZ1024EFH100-E/GJX 100-pin tfbga (7x7 mm) 핀 구성 가이드
PIC32MZ1024EFH100-E/GJX(100-pin tfbga (7x7 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC32MZ1024EFH100-E/GJX.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC32MZ1024EFH100-E/GJX 적합 용도: 7 애플리케이션s: Industrial Automation Controllers, Automotive Body and Infotainment Modules, IoT Edge Gateways, Graphics HMI Touch Panels, Motor Control Drives, Medical Patient Monitoring, Audio Processing and Effects.
Industrial Automation Controllers
The PIC32MZ1024EFH100-E/GJX fits industrial PLC and distributed controller applications because its 200 MHz MIPS core with FPU executes complex control loops within tight real-time budgets. The dual CAN 2.0b controllers allow native fieldbus communication with industrial sensors and motor drives, while the 10/100 Ethernet MAC supports EtherCAT/PROFINET gateway implementations. The -40C to +125C extended temperature grade enables cabinet-free deployment near motors and process equipment.
추천
Automotive Body and Infotainment Modules
The PIC32MZ1024EFH100-E/GJX is AEC-Q100 qualified with -40C to +125C operation, making it suitable for automotive body control modules and infotainment peripherals. The USB 2.0 high-speed PHY with on-chip transceiver enables direct connection to infotainment head units, while dual CAN interfaces connect to vehicle body networks. The 1 MB Flash supports layered AUTOSAR-style firmware architectures with bootloaders and application images using dual-panel Flash.
추천
IoT Edge Gateways
The PIC32MZ1024EFH100-E/GJX serves as an IoT edge gateway controller, leveraging its integrated Ethernet MAC, USB 2.0 high-speed PHY, and multiple UART/SPI/I2C interfaces to aggregate diverse sensor and fieldbus data. The 200 MHz core with FPU runs TLS 1.3 handshake and MQTT payload processing locally, while the 512 KB SRAM accommodates TLS buffers and packet queues. Dual-panel Flash enables secure OTA firmware updates in deployed gateway units.
추천
Graphics HMI Touch Panels
While the EFH variant prioritizes connectivity, the PIC32MZ1024EFH100-E/GJX can drive smaller HMI panels through its parallel master port and integrated TFT timing controllers. The 200 MHz MIPS core with FPU accelerates vector rendering and touch gesture processing, and the 12-bit ADC supports touch-sensing front-end measurements. For full graphics workloads the pin-compatible PIC32MZ1024EFG100-I/GJX with dedicated graphics controller is recommended.
추천
Motor Control Drives
The PIC32MZ1024EFH100-E/GJX handles sensorless and encoder-based motor control through its 200 MHz MIPS core, DSP extensions with single-cycle MAC, and high-resolution PWM peripherals. The FPU accelerates Park/Clarke transforms in field-oriented control algorithms, while the 12-bit 18 MSPS ADC samples motor phase currents with minimal latency. The extended -40C to +125C temperature grade supports deployment on integrated motor drive PCBs.
추천
Medical Patient Monitoring
The PIC32MZ1024EFH100-E/GJX is used in medical patient monitoring peripherals where deterministic USB 2.0 high-speed data streaming delivers waveform data to host processors. The 200 MHz core with DSP extensions enables on-device QRS detection and SpO2 signal processing, reducing host CPU load. Note that medical safety certification requires IEC 62304/ISO 14971 compliance beyond the MCU itself - the device supports but does not certify the end-product.
추천
Audio Processing and Effects
The PIC32MZ1024EFH100-E/GJX accelerates audio DSP workloads through its MIPS Warrior M-class core with IEEE 754 FPU and four 64-bit accumulators supporting single-cycle MAC operations. The 200 MHz core sustains real-time audio sample rates at 48 kHz with headroom for reverb, EQ, and dynamics processing algorithms. The I2S peripheral interfaces directly to audio codecs, while DMA channels offload sample transfer from the CPU.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MZ1024EFH100-E/GJX — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MZ1024EFH100-I/GJX | PIC32MZ1024EFH100T-E/GJX | PIC32MZ2048EFH100-E/GJX | PIC32MZ1024EFF100-E/GJX |
|---|---|---|---|---|---|
| Package | TFBGA-100 (GJX) | TFBGA-100 (GJX) - same | TFBGA-100 (GJX) - same | TFBGA-100 (GJX) - same | TFBGA-100 (GJX) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Speed | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash | 1 MB | 1 MB | 1 MB | 2 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Temperature Grade | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +125C (Extended) | -40C to +125C (Extended) |
| USB 2.0 HS PHY | Yes | Yes | Yes | Yes | Yes |
| Ethernet MAC | 10/100 Mbps RMII/MII | 10/100 Mbps RMII/MII | 10/100 Mbps RMII/MII | 10/100 Mbps RMII/MII | 10/100 Mbps RMII/MII (reduced peripheral set) |
| AEC-Q100 | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- Extended industrial temperature grade with AEC-Q100 automotive qualification (vs PIC32MZ1024EFH100-I/GJX)
- Higher memory density for complex firmware stacks (vs PIC32MZ1024EFF100-E/GJX)
- Cost-efficient path to 2 MB Flash in same footprint (vs PIC32MZ2048EFH100-E/GJX)
설계 노트
The PIC32MZ EF core draws peak currents exceeding 80 mA at 200 MHz with FPU active. Place one 0.1uF X7R ceramic bypass capacitor within 2 mm of every VDD/VSS pair, and add a bulk 10uF tantalum or polymer capacitor near the package. Route separate analog (AVDD) and digital supply planes with ferrite-bead isolation if the 12-bit ADC accuracy matters in your design. The voltage regulator core (VCAP) requires an external 4.7uF capacitor - do not omit.
TFBGA-100 (7x7 mm) requires 0.5 mm pitch fanout using microvia-in-pad or dog-bone via fanout to maintain manufacturability. Use 4-layer PCB minimum with continuous ground plane beneath the BGA for both reference return and thermal dissipation. Maintain length-matched differential routing (<5 mil tolerance) for USB 2.0 high-speed pairs (D+/D-) and RMII Ethernet signals per Microchip hardware layout guidelines.
Common pitfalls with the PIC32MZ EF family: (1) forgetting to configure the secondary oscillator for RTC operation when using deep sleep modes, (2) overlooking that dual-panel Flash live update requires firmware-managed partition swapping, (3) failing to enable the JTAG/ICSP pull-ups during programming, (4) using the wrong VCAP value which causes core regulator instability - check the family datasheet DS60001320 for the exact capacitor specification. Always validate oscillator start-up time across the full -40C to +125C range.
규정 준수 정보
RoHS and REACH compliant per Microchip product page. AEC-Q100 qualified for automotive applications. Lead-free and halogen-free per Microchip material declarations.