집적 회로

THS1230CDWG4

THS1230CDWG4 - 12-Bit 30MSPS Low-Power ADC | Texas Instruments

The Texas Instruments THS1230CDWG4 is a 12-bit, 30 MSPS low-power analog-to-digital converter (ADC) with integrated power-down, offered in a 28-pin SOIC (DW) package. It supports a single 3.3 V nominal supply, accepts differential or single-ended analog inputs, and exposes a parallel CMOS digital interface that simplifies connection to DSPs, FPGAs, and microcontrollers without an intermediate serializer. The "G4" lead-free finish indicator places the part on TI's lead-free (Pb-free) green product line, which is consistent with RoHS-compliant assembly. What is an ADC, and where does the THS1230 sit in the taxonomy? An analog-to-digital converter is a data converter that samples a continuous-time, continuous-amplitude input and produces a discrete-time, discrete-amplitude digital code. The hierarchy flows: ADC -> data converter -> mixed-signal IC -> semiconductor. The THS1230 is a successive-approximation-register (SAR) style, low-power, medium-speed pipeline-flavored ADC positioned for embedded acquisition, instrumentation, and digital imaging front-ends where 12-bit resolution and tens of MSPS are sufficient and where every milliwatt of conversion power matters. Key specifications include 12-bit resolution, 30 MSPS maximum sampling rate, a maximum conversion time of about 33 ns (compatible with 30 MSPS), an operating temperature range of 0C to +70C (commercial grade), and a 28-SOIC wide-body package. Input configurations include differential and single-ended analog inputs, and the digital output bus is parallel CMOS for straightforward FIFO or microcontroller interfacing. A dedicated power-down pin enables low standby current between conversions or sample bursts, which is essential for portable or duty-cycled designs. The THS1230 family is built around a pipelined multi-stage architecture that balances sample rate and die area against resolution, targeting the 10-12 bit, 10-80 MSPS sweet spot. Its analog input bandwidth and aperture design support IF sampling and baseband digitization, while the parallel CMOS bus avoids the complexity of LVDS serialization for low-to-medium rate designs. Typical applications include portable and battery-powered data acquisition systems, digital oscilloscope front-ends, CCD/CIS imaging digitizers, medical ultrasound baseband acquisition, cable modem upstream channels, and communications IF/baseband sampling. When designing, pay attention to input common-mode voltage, reference decoupling, and clock jitter: SNR at 30 MSPS is sensitive to the analog input bandwidth and to the aperture uncertainty of the sampling clock.

USD $4.85 재고 있음

THS1230CDWR

THS1230CDWR - 12-Bit 30 MSPS Low-Power ADC | Texas Instruments

The Texas Instruments THS1230CDWR is a 12-bit, 30 MSPS, low-power analog-to-digital converter (ADC) with an integrated power-down mode, supplied from a single 3.3 V rail and housed in a 28-pin SOIC (DW) package with tape-and-reel packaging. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that samples continuous analog input voltages and produces discrete digital codes at a defined sample rate. The THS1230 belongs to the successive-approximation-register (SAR) ADC product family, which trades the very high sample rates of flash or pipeline converters for low power consumption, low latency, and excellent DC accuracy. Within the broader semiconductor taxonomy, the THS1230 is a data-conversion IC, itself a sub-category of mixed-signal integrated circuits that sit between analog signal-conditioning blocks and a host microcontroller, FPGA, or DSP. Key features of the THS1230CDWR include 12-bit resolution, 30 MSPS maximum sampling rate, configurable analog inputs that can be set to single-ended, single-ended with offset, or true differential modes, internal reference voltage, and a hardware power-down pin that drops quiescent current to microamp levels when conversions are not required. The part operates from a single 3.3 V supply and is specified over the commercial 0 °C to +70 °C temperature range (C-grade). The wide input range and flexible input topology allow the converter to interface directly with many op-amp output stages without external level translation. Internally, the THS1230 uses a pipelined multi-stage architecture combined with an internal reference and digital error correction to deliver 12-bit linearity at high throughput while keeping total power consumption below 250 mW at full sample rate. The digital outputs are CMOS-compatible and can be directly connected to a wide range of DSPs, microcontrollers, and FPGAs. Built-in sample-and-hold, internal clock duty-cycle stabilizer, and an out-of-range indicator further simplify system design. Typical applications include CCD and CIS imaging digitizers, baseband processing for low-IF radio receivers, portable instrumentation and data loggers, ultrasound front-end preprocessing, and general-purpose high-speed data acquisition systems. Its low power dissipation also makes it well suited to battery-powered equipment. When designing with this device, pay close attention to the analog input common-mode voltage, the decoupling of AVDD and DRVDD supplies, and the placement of the input RC anti-aliasing network. Use a low-jitter external oscillator to drive the CLK input because aperture-jitter limitations directly cap achievable signal-to-noise ratio at high input frequencies. This page synthesizes distributor pricing, drop-in SOIC-28 alternatives, and practical design notes that are not aggregated in any single manufacturer datasheet.

USD $5.20 재고 있음

THS1230CDWRG4

THS1230CDWRG4 - 12-Bit 30 MSPS Low-Power ADC | Texas Instruments

The Texas Instruments THS1230CDWRG4 is a 12-bit, 30 MSPS, low-power analog-to-digital converter with power-down, supplied from a single 3.3V rail and housed in a 28-pin SOIC (DW) wide-body package. The device supports configurable input functions including single-ended, single-ended with offset, and fully differential inputs, providing designers flexibility for direct IF sampling and baseband digitization. With an analog input range of -2V to +2V and a parallel CMOS output interface, the THS1230CDWRG4 targets cost-sensitive high-speed data acquisition applications. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that samples continuous analog voltage signals and converts each sample into a discrete digital code. Within the data converter hierarchy, the THS1230CDWRG4 belongs to the pipelined ADC sub-family, sits under the broader SAR/pipeline high-speed ADC category, and ultimately falls into the data acquisition IC class of power management and signal-chain semiconductors. Pipelined ADCs like the THS1230 family typically deliver sampling rates from 10 MSPS to over 100 MSPS at moderate resolution (8-14 bits), making them well suited to imaging, communications, and instrumentation. Key features include 12-bit resolution at 30 MSPS conversion rate, single 3.3V supply operation, low power consumption suitable for portable and embedded designs, an integrated power-down mode for battery-powered applications, and a wide -40C to +85C operating temperature range. The configurable analog input structure allows the same device to interface with single-supply sensors, bipolar signals, or differential driver outputs without external translation amplifiers. The THS1230CDWRG4 architecture is built on a switched-capacitor pipelined core with an internal reference and on-chip sample-and-hold. The pipelined topology provides consistent throughput independent of resolution, while internal calibration and error correction logic maintain linearity across the operating range. The parallel CMOS output bus simplifies connection to FPGAs, ASICs, and microcontrollers without requiring an external serializer. Typical applications include CCD image sensor digitizers, portable oscilloscopes, USB-based oscilloscope probes, IF sampling in software-defined radio, set-top box video digitizing, and machine vision camera front-ends. The wide input range and configurable input modes also simplify interface with CCD output stages and baseband I/Q channels. When designing with this device, ensure that the analog input common-mode voltage is centered within the supported range and that the 3.3V supply is well-decoupled with both bulk and high-frequency ceramics placed close to the supply pins. The output bus must be routed with matched trace lengths to avoid setup/hold violations at the receiving FPGA or ASIC. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes beyond what is contained in the manufacturer datasheet. Designers should still validate signal-chain budgeting, reference decoupling, and PCB layout against the official TI datasheet before committing to a layout.

USD $5.92 재고 있음

THS1230CPWG4

THS1230CPWG4 - 12-Bit 30 MSPS Low-Power ADC | Texas Instruments

The Texas Instruments THS1230CPWG4 is a 12-bit, 30 MSPS, low-power CMOS analog-to-digital converter with an integrated power-down mode, supplied in a 28-pin TSSOP (PW) package. It accepts differential or single-ended analog inputs, delivers parallel CMOS-compatible digital outputs, and is specified for commercial temperature operation from 0C to +70C. What is a high-speed pipeline ADC? A pipelined analog-to-digital converter is a converter architecture that uses multiple low-resolution stages in cascade to achieve higher conversion rates than successive-approximation or sigma-delta topologies. Pipeline ADCs occupy the middle ground between SAR (low-power, medium speed) and flash (very high speed, high power), and dominate applications from digital oscilloscopes to CCD imaging and baseband communications. The THS1230 belongs to this converter family and is aimed at cost-sensitive, mid-bandwidth designs. Key features include 12-bit native resolution, a 30 MSPS maximum sampling rate, single 3.3 V analog supply operation, integrated sample-and-hold, low differential nonlinearity, and a power-down pin for standby current reduction. The differential input structure supports either AC-coupled differential or DC-coupled single-ended drive, simplifying front-end anti-alias filtering and reference design. The device uses a multi-stage pipelined architecture with on-chip digital error correction, yielding low integral nonlinearity and good spurious-free dynamic range for IF sampling. Internal bandgap-based reference and reference-buffer circuitry remove the need for an external precision reference, reducing BOM count in cost-driven designs. Typical applications include video digitisation, CCD/CIS imaging front-ends, portable test and measurement, low-cost digital oscilloscope input channels, and baseband IF sampling in communication receivers. The 28-TSSOP footprint simplifies layout on standard 4-layer FR-4 boards. When designing with the THS1230CPWG4, ensure the analog input common-mode is biased within the device's input range (typically mid-rail for single 3.3 V supply) and that the encode clock is jitter-clean to preserve SNR at high input frequencies. Decouple AVDD and DVDD separately with both bulk and ceramic capacitors placed as close as possible to the supply pins. This page synthesises distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $5.62 재고 있음

THS1230CPWRG4

THS1230CPWRG4 - 12-Bit 30MSPS Low-Power ADC | Texas Instruments

The Texas Instruments THS1230CPWRG4 is a CMOS, low-power, 12-bit, 30 MSPS analog-to-digital converter (ADC) that operates from a single 3.3 V supply, packaged in a 28-pin TSSOP (PW) with PowerPAD. The part delivers 12-bit resolution at 30 MSPS sampling rate while drawing only modest supply current, with an integrated power-down mode that reduces consumption to a few milliwatts during idle windows. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts continuous-time analog voltages into discrete digital codes at a defined sampling rate. ADCs sit at the boundary between the analog front end (sensors, amplifiers, filters) and the digital back end (DSPs, FPGAs, microcontrollers). Within the data-converter hierarchy, the THS1230 is a successive-approximation / pipelined hybrid, belonging to the broader family of low-power, medium-speed precision converters used in industrial, instrumentation, and communications applications. Key features include configurable analog inputs (single-ended, single-ended with offset, or fully differential), 3.3 V single-supply operation, an internal reference option, and a parallel digital output interface. The PowerPAD TSSOP-28 package provides a low thermal-resistance path (~30 C/W) suitable for industrial temperature operation. The device's low power dissipation makes it suitable for portable or thermally-constrained designs where a higher-speed pipelined ADC would generate excessive heat. Architecture-wise, the THS1230 uses a pipelined core with digital error correction, allowing 30 MSPS operation while keeping analog input bandwidth wide enough for IF-sampling applications. The integrated input multiplexer and reference buffer reduce external component count, simplifying board layout and BOM cost. Typical applications include CCD imaging digitizers, baseband processing in wireless receivers, portable instrumentation, ultrasonic medical imaging front ends, and general-purpose data acquisition. The 28-pin TSSOP footprint is industry-standard and pin-compatible with several other TI 12-bit ADC products. When designing with this device, ensure the analog input common-mode voltage stays within the input range specified in the datasheet and provide adequate decoupling on AVDD and DVDD rails to achieve datasheet SNR. The PowerPAD must be soldered to a grounded copper pour to meet thermal specifications. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $5.65 재고 있음

THS1230IPWRG4

THS1230IPWRG4 - 12-Bit 30 MSPS Low-Power ADC | Texas Instruments

The Texas Instruments THS1230IPWRG4 is a 12-bit, 30 MSPS, low-power analog-to-digital converter (ADC) with integrated power-down mode, supplied from a single 3.3 V rail and housed in a 28-pin TSSOP (PW) package. According to the manufacturer datasheet, the device supports configurable input functions including single-ended, single-ended with offset, and differential inputs, enabling direct interface to a wide range of sensor and IF signal-chain outputs. An analog-to-digital converter (ADC) is a data-conversion integrated circuit that samples a continuous analog waveform at a fixed clock rate and quantizes each sample into a binary code. ADCs sit in the broader signal-chain hierarchy of: ADC -> data converter -> data acquisition IC -> semiconductor. The THS1230 family uses a pipelined architecture (per the GlobalSpec datasheet synopsis) to balance conversion speed, power dissipation, and dynamic range, making it suitable for battery-operated and thermally constrained designs. Key specifications include 12-bit resolution, 30 MSPS maximum sampling rate, 3.3 V single-supply operation, and configurable analog input paths. The PW suffix denotes the industrial-temperature grade (-40 C to +85 C) in tape-and-reel packaging, while the G4 suffix indicates a Pb-free / RoHS-compliant terminal finish. A power-down pin reduces quiescent dissipation between conversions, which is critical for low-duty-cycle battery applications such as portable instrumentation or remote sensor nodes. Architecturally, the pipelined core typically resolves a sample over multiple clock cycles using sub-ADC stages and a digital error-correction block; this allows high throughput at moderate power budgets. The configurable input block (single-ended, single-ended with offset, differential) effectively acts as an on-chip front-end multiplexer, eliminating external signal-conditioning stages in many designs and shortening the analog signal path for improved SNR. Typical applications include portable and handheld digital oscilloscope front-ends, digital IF sampling for communications receivers, CCD/CIS image-scanner digitizers, ultrasound beamformer input stages, and baseband digitization in low-power wireless links. The combination of low power, integrated input mux, and small TSSOP-28 footprint also suits portable test-and-measurement and industrial data-acquisition modules where PCB area is at a premium. When designing with the THS1230IPWRG4, ensure the analog input common-mode voltage and reference decoupling follow the datasheet guidance; insufficient decoupling is the most common source of degraded SNR and spurious tones. For best noise performance, place the 0.1 uF and 10 uF decoupling capacitors within 5 mm of the AVDD pins and keep the analog input traces impedance-controlled and length-matched where differential mode is used. This page synthesizes distributor stock, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single-citation source for selection, replacement, and PCB-level implementation guidance.

USD $4.42 재고 있음

THS1403QPHPEP

THS1403QPHPEP - 14-Bit 3MSPS ADC, HTQFP-48 | TI

The Texas Instruments THS1403QPHPEP is a 14-bit, 3 MSPS, single-supply analog-to-digital converter (ADC) with internal reference, differential inputs, programmable gain amplifier (PGA), and on-chip sample-and-hold amplifier, housed in a 48-pin HTQFP (PowerPAD) package. The device is the MIL-Enhanced Plastic (EP) variant of the THS1403 family, qualified for automotive and defense-grade temperature ranges. An analog-to-digital converter is a semiconductor device that converts continuous analog voltage signals into discrete digital codes, forming the interface between the real-world analog domain and digital signal processing. A successive-approximation or pipelined ADC (such as the THS1403) sits within the broader power management and data converter hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor. The THS1403 family ranges from 1 MSPS (THS1401) to 8 MSPS (THS1408), with the THS1403 offering a balanced 3 MSPS throughput for cost-sensitive DSP-front-end designs. Key features include 14-bit resolution with no missing codes, a 3 MSPS sampling rate, internal 2.5 V reference, programmable input gain (PGA), low differential nonlinearity (DNL), single 3.3 V supply operation, and CMOS process technology for low power consumption. The device also supports an external reference mode for applications requiring absolute accuracy beyond the internal bandgap reference. Conversion time is approximately 333 ns. The THS1403QPHPEP uses a pipelined architecture optimized for low power while maintaining high throughput. The integrated PGA accepts differential input signals up to ±VREF, eliminating external instrumentation amplifiers in many cases. The HTQFP-48 PowerPAD package provides an exposed thermal pad (theta_JA approximately 25 C/W with proper PCB layout) for heat dissipation in space-constrained, high-ambient-temperature designs. Typical applications include automotive radar signal processing front ends, DSP-based motor control feedback loops, industrial data acquisition modules, medical imaging front ends, and defense/military vision systems. The wide operating temperature range (automotive grade) and the MIL-Enhanced Plastic reliability make the THS1403QPHPEP especially suited for harsh-environment deployments. When designing with this part, a 0.1uF decoupling capacitor must be placed as close as possible to each power pin. The HTQFP-48 PowerPAD should be soldered to a continuous copper ground plane for optimal thermal dissipation. The PGA gain setting must be configured via the gain-select pins before initiating conversions to avoid settled-value errors. This page synthesizes distributor pricing, MIL-EP qualification context, and practical PCB layout guidance not found on a single manufacturer page, accelerating the engineer evaluation workflow.

USD $13.05 재고 있음

THS3061DGN

THS3061DGN - 300MHz CFA, 7000V/us Slew Rate | Texas Instruments

The Texas Instruments THS3061DGN is a single high-voltage, high slew-rate current feedback amplifier delivering 300 MHz unity-gain bandwidth, 7000 V/us slew rate, and +/-145 mA output current into 50 ohms, housed in an 8-pin HVSSOP (DGN) package with PowerPAD thermal pad. A current feedback amplifier (CFA) is a type of high-speed operational amplifier whose architecture uses a low-impedance inverting input to achieve bandwidth that is largely independent of closed-loop gain. In the signal-chain hierarchy, the CFA sits within the amplifier IC family alongside voltage feedback op amps (VFA) and fully differential amplifiers, and is preferred where wide bandwidth and fast settling must be maintained without the gain-bandwidth product penalty of VFAs. Key features include 7000 V/us slew rate for large-signal high-frequency performance, 0.1 dB gain flatness bandwidth of 120 MHz at a gain of 2, low distortion of -81 dBc at 10 MHz, and high output drive of +/-145 mA into 50 ohm loads. These parameters suit the device for driving ADC inputs, coaxial cables, and other low-impedance loads directly. The THS3061 is fabricated on Texas Instruments' BICOM-1 complementary bipolar process, enabling high-voltage operation (up to +/-15 V class supplies) with high-speed performance. The current feedback topology keeps bandwidth relatively constant across gain settings, while the PowerPAD package provides a low thermal resistance path essential for high-output-current operation. Typical applications include pulse amplifiers, RF/IF signal chains, high-speed data acquisition front ends, video line drivers, and test-and-measurement signal sources. Design consideration: as a CFA, the feedback resistor value must be selected per the datasheet recommendations; lowering Rf to increase bandwidth can cause peaking and instability. Ensure proper PowerPAD soldering to the PCB ground plane for thermal performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $3.26 재고 있음

THS3061DGNR

THS3061DGNR - 300MHz 7000V/us CFB Amplifier | Texas Instruments

The Texas Instruments THS3061DGNR is a single-channel, high-voltage, high-slew-rate current-feedback (CFB) amplifier delivering a 300 MHz unity-gain bandwidth, a 7000 V/us slew rate, and up to +/-145 mA of output current into a 50 ohm load, housed in an 8-pin HVSSOP (DGN) package with PowerPAD thermal pad. It operates from supplies up to +/-15 V (30 V total). A current-feedback amplifier is a type of high-speed operational amplifier whose bandwidth is largely independent of closed-loop gain, making it a member of the broader amplifier hierarchy: CFB amplifier -> high-speed op amp -> operational amplifier -> analog signal-conditioning IC. Unlike voltage-feedback amplifiers, CFAs use a low-impedance inverting input and a current-driven internal stage, which is what enables their exceptional slew rates. Key features of the THS3061 include a 0.1 dB flatness bandwidth of 120 MHz at a gain of 2, second-harmonic distortion of -81 dBc at 10 MHz, and high output drive current of +/-145 mA, per the TI datasheet. These specs suit applications that need both speed and signal swing into low impedances. The device is fabricated on the TI BICOM-1 complementary bipolar process, which underpins its combination of high breakdown voltage (up to 30 V total supply) and high-frequency performance. The PowerPAD HVSSOP-8 package provides a low thermal-impedance path to the PCB, essential when driving heavy loads at high frequency. Typical applications include high-voltage pulse and laser-diode drivers, ADC input drivers in test and measurement equipment, video and communications signal chains, and active probes requiring high slew rate with substantial output current. Design consideration: because this is a current-feedback amplifier, the feedback resistor value should be kept close to the datasheet-recommended range; increasing RF reduces bandwidth and stabilizes the loop, while decreasing it can cause peaking or oscillation. This page synthesizes distributor availability data, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-09-13.

USD $2.70 재고 있음

THS4031

THS4031 - 100MHz 1.6nV Low-Noise Op Amp | Texas Instruments

The Texas Instruments THS4031 is a single-channel, ultra-low voltage noise, high-speed voltage feedback amplifier delivering a 100-MHz bandwidth at gain of 2, a 100-V/us slew rate, and a 60-ns settling time (0.1%). It operates from a supply range of +/-5V to +/-15V, provides 90 mA output drive, and draws only 8.5-mA supply current per channel, in an 8-pin HVSSOP (DGK) package with power pad. A voltage feedback amplifier is a type of operational amplifier that uses voltage feedback to set closed-loop gain, offering high bandwidth and low distortion. It is a fundamental analog signal-chain building block used in buffer, filter, and gain stages. The THS4031 belongs to the high-speed amplifier family, a subset of operational amplifiers designed for fast, low-noise signal conditioning. Key features include ultra-low 1.6 nV/Hz voltage noise, very low distortion (THD = -72 dBc at 1 MHz with RL = 100 ohm, -90 dBc at 1 MHz with RL = 1k ohm), and a low 0.5-mV typical input offset voltage. The amplifier is stable in gains of -1 or greater with a 275-MHz unity-gain bandwidth, ensuring stable operation in high-frequency signal paths. The THS4031 uses a complementary bipolar process that achieves low noise and high speed simultaneously, providing excellent AC performance while maintaining low DC errors. The HVSSOP (DGK) package is compact and thermally efficient when its power pad is soldered to a copper plane. Typical applications include communication systems, imaging systems, active filters, and ADC drivers. In communication receivers, the 1.6 nV/Hz noise floor preserves signal integrity; in imaging systems, the 60-ns settling time enables accurate pixel processing; the 90-mA output drives heavy loads directly. Design tip: decouple supplies with 0.1-uF ceramic capacitors close to the supply pins, and solder the thermal pad to a ground plane for adequate heat dissipation. The device is RoHS compliant and operates over the -40C to +85C industrial temperature range.

USD $1.85 재고 있음

THS4031CDGNR

THS4031CDGNR - 100MHz Low-Noise Op Amp | Texas Instruments

The Texas Instruments THS4031CDGNR is a single-channel, 100 MHz low-noise high-speed voltage-feedback amplifier delivering 1.6 nV/Hz input voltage noise, 100 V/us slew rate, and 90 mA output current in an 8-pin MSOP (DGN, PowerPAD HVSSOP) package. A voltage-feedback operational amplifier is a differential-input, high-gain amplifier whose closed-loop bandwidth is set by an external feedback network, making it the workhorse of the analog signal chain within the broader amplifier family: op amp -> linear amplifier -> signal conditioning IC. Unlike current-feedback topologies, voltage-feedback parts allow symmetric impedances and conventional filter topologies, which is why they dominate precision and low-noise designs. Key features of the THS4031CDGNR include ultra-low 1.6 nV/Hz voltage noise for high dynamic range, 100 MHz bandwidth at a gain of 2, and very low distortion of -72 dBc THD at 1 MHz. The 60 ns settling time to 0.1% supports fast data-acquisition loops, and the PowerPAD MSOP-8 package provides a low thermal-resistance path for reliable high-output-current operation. Architecturally, the THS403x family uses a bipolar high-speed complementary process that trades moderate quiescent power for exceptionally low input voltage noise, which dominates total noise in low-impedance sources. The 0.5 mV typical input offset voltage keeps DC accuracy adequate for AC-coupled and gain-trimmed designs. Typical applications include communications receiver front ends, imaging signal chains, ADC and DAC buffer stages, IF amplifiers, and test-and-measurement instrumentation where noise floor directly limits resolution. Design consideration: keep feedback resistors low (hundreds of ohms) so resistor noise does not swamp the 1.6 nV/Hz amplifier noise, and use the PowerPAD soldered to a copper pour for thermal dissipation. This page adds value beyond the datasheet by synthesizing distributor stock links, drop-in alternative analysis, and practical design notes in one place.

USD $1.62 재고 있음

THS4031CDR

THS4031CDR - 100MHz Low-Noise Voltage Feedback Op Amp | TI

The Texas Instruments THS4031CDR is a 100 MHz single-channel low-noise voltage-feedback operational amplifier delivering a 100 V/us slew rate and 60 ns settling time to 0.1%, supplied in an 8-pin SOIC (D) package on tape and reel. A voltage-feedback operational amplifier is a high-gain differential amplifier whose closed-loop bandwidth is set by the feedback network and the amplifier's gain-bandwidth product. Within the signal-chain hierarchy, it sits in the amplifier IC category alongside current-feedback and fully differential amplifiers, serving as a building block for filters, gain stages, buffers, and driver circuits in analog front ends. Key features of the THS4031 include a 100 MHz bandwidth at a gain of 2, unity-gain stability with a 275 MHz open-loop bandwidth, an ultra-low input voltage noise of [DATA_NEEDED: input voltage noise], and high DC precision with 90 dB CMRR. The device operates from supplies up to +/-16 V (32 V total), giving wide signal-swing headroom uncommon in lower-voltage high-speed amplifiers. The bipolar input architecture of the THS403x family combines very low voltage noise with high-speed settling, making it well suited for driving ADC inputs and video-type loads. According to the TI datasheet, the amplifier achieves 60 ns settling to 0.1% for a 2 V step, which supports high-throughput data-acquisition systems requiring fast, accurate settling between channel switches. Typical applications include ADC input drive in instrumentation, active filter stages in test and measurement equipment, video and high-speed signal conditioning, and IF-stage gain blocks in communications receivers where low noise and 100 MHz bandwidth are required. Design-wise, the THS4031 is unity-gain stable, but layout discipline matters at these speeds: minimize feedback-loop area, keep the gain resistor values low, and decouple supply pins with 0.1 uF ceramics placed close to pins 7 and 3 to preserve bandwidth and stability. This page adds value beyond the TI datasheet by synthesizing distributor availability, drop-in same-brand alternatives (THS4031IDR/THS4031ID), and practical high-speed layout guidance in one citable reference.

USD $1.05 재고 있음

THS4031IDGNR

THS4031IDGNR - 100MHz Low-Noise VFB Amplifier | Texas Instruments

The Texas Instruments THS4031IDGNR is a single-channel, 100-MHz low-noise voltage-feedback amplifier delivering 100 V/us slew rate and an ultra-low 1.6 nV/√Hz input voltage noise, housed in an 8-pin HVSSOP (DGN) PowerPAD package rated from -40C to +85C. A voltage-feedback amplifier (VFA) is an operational amplifier in which the feedback network controls the differential input voltage, giving it a constant gain-bandwidth product. Within the signal-chain hierarchy, the VFA sits in the amplifier family (op amp -> amplifier -> analog signal conditioning IC) and is the classical choice where the designer wants the gain-bandwidth trade-off of a conventional feedback topology rather than the fixed-gain behavior of a current-feedback amplifier (CFA). The defining feature of the THS4031 is its 1.6 nV/√Hz voltage noise, among the lowest available in its class, which directly improves SNR in wideband analog front ends. It is stable in noise gains of 1 V/V or greater, delivers 100 V/us slew rate, and exhibits low distortion with THD of -72 dBc at 1 MHz into low-impedance loads and -90 dBc at 1 MHz into 1 kΩ. The typical input offset voltage is only 0.5 mV, and the output drives approximately 90 mA, enough for back-terminated 50-ohm and 75-ohm video/RF lines. Architecturally, the THS4031 pairs a low-noise bipolar input stage with a high-bandwidth voltage-feedback core, and the DGN PowerPAD package provides a low thermal-resistance path to the PCB so the die stays cool at high supply voltages of up to ±16 V. This combination of noise, bandwidth, and drive makes it suitable for communications receivers, imaging signal chains, ADC input drivers, and IF/RF gain blocks. Typical applications include low-noise gain stages ahead of high-speed ADCs, ultrasound and CCD imaging front ends, and broadband test-and-measurement amplification. The supply range of ±4.5 V to ±16 V supports both ±5 V and ±15 V analog rails. Design consideration: at high closed-loop gains the 100 MHz bandwidth scales down by the gain-bandwidth product, so budget bandwidth at your actual noise gain and use the PowerPAD soldered to a solid ground plane. This page adds distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $2.78 재고 있음

THS4031IDR

THS4031IDR - 100MHz Low-Noise Voltage Feedback Op-Amp | TI

The Texas Instruments THS4031IDR is a single-channel, ultra-low-noise, high-speed voltage-feedback operational amplifier delivering a 100 MHz bandwidth at a gain of 2 (275 MHz unity-gain stable bandwidth), a 100 V/µs slew rate, and 90 dB CMRR, housed in an 8-pin SOIC (D) package rated for -40C to +85C operation. A voltage-feedback amplifier (VFA) is a type of operational amplifier in which the feedback network senses voltage at the input pins, as opposed to a current-feedback amplifier (CFA) which senses current. Within the signal-chain hierarchy, the op-amp belongs to the amplifier IC family, which sits under linear ICs and ultimately analog semiconductors. Voltage-feedback topologies are preferred where symmetric input impedance, precision DC accuracy, and conventional feedback network design techniques are required. Key differentiating features of the THS4031 include its ultra-low input voltage noise, high 100 MHz bandwidth at G=2, 60 ns settling time to 0.1%, and high output drive capability. The 90 dB CMRR and low voltage noise make it particularly effective in the first stages of low-level signal chains, where noise floor directly limits dynamic range and resolution. Architecturally, the THS4031 uses a voltage-feedback input stage optimized for low noise rather than lowest power, trading quiescent current for wideband, low-noise performance. The output stage is designed with high drive capability to support communications and imaging loads, maintaining AC performance into practical capacitive and resistive loads encountered in real signal chains. Typical applications include communications receivers and transmitters, imaging systems, high-speed data acquisition front ends, IF and RF gain blocks, and low-noise buffer stages for ADC drivers, where the combination of 100 MHz bandwidth and ultra-low voltage noise directly improves system SNR. A key design consideration is power-supply decoupling: at 100 MHz bandwidth, place low-inductance 0.1 µF ceramic capacitors directly at the supply pins and use a solid ground plane to prevent instability. Also verify gain-bandwidth margin, as the 100 MHz bandwidth is specified at a gain of 2. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet, providing unique cross-reference value for engineers and buyers.

USD $2.62 재고 있음

THS4031Q-Q1

THS4031Q-Q1 - 100MHz 1.6nV Low-Noise Op Amp AEC-Q100 | TI

The Texas Instruments THS4031Q-Q1 is an automotive-qualified (AEC-Q100) version of the THS4031, an ultra-low voltage noise, high-speed voltage feedback operational amplifier delivering 100 MHz bandwidth at a gain of 2, 100 V/us slew rate, and just 1.6 nV/rtHz input voltage noise. It comes in an HTSSOP-8 PowerPAD (DDA) package for enhanced thermal dissipation. A high-speed operational amplifier is a voltage feedback amplifier optimized for wide bandwidth and fast settling, sitting within the amplifier IC hierarchy of linear signal chain components. The THS4031 family (single THS4031, dual THS4032) is engineered specifically for applications where low voltage noise dominates system SNR, such as communications receivers and imaging front ends. Key features include ultra-low 1.6 nV/rtHz voltage noise, 100 MHz bandwidth (G = 2), 100 V/us slew rate, and 70 ns settling time to 0.1%. Distortion is very low: THD = -72 dBc at 1 MHz into 100 ohms and -90 dBc at 1 MHz into 1 kohm. Input offset voltage is a low 0.5 mV (typ) with 90 mA output current drive capability, allowing the amplifier to directly drive low-impedance loads and ADC inputs. The voltage feedback architecture remains stable in gains of -1 V/V or greater, and the PowerPAD package provides a low thermal resistance path that keeps junction temperatures safe during high-output-current operation. The Q-Q1 suffix denotes AEC-Q100 qualification and PPAP support for automotive design flows. Typical applications include automotive communications and imaging systems, wideband transimpedance and RF/IF gain stages, active filters, and ADC buffer drivers where 1.6 nV/rtHz noise preserves dynamic range. Design consideration: use a low-impedance feedback network (typically below 1 kohm) because resistor thermal noise can easily exceed the amplifier's intrinsic 1.6 nV/rtHz; also solder the PowerPAD to a copper pour for rated thermal performance.

USD $1.63 재고 있음

THS4062CDR

THS4062CDR - 180MHz Dual High-Drive Op-Amp | Texas Instruments

The Texas Instruments THS4062CDR is a dual high-speed voltage-feedback operational amplifier delivering 180 MHz bandwidth (-3 dB), 400 V/us slew rate, and 115 mA (typ) high output drive, housed in an 8-pin SOIC (D) package rated for 0C to +70C operation. A voltage-feedback operational amplifier is a linear amplifier that produces an output proportional to the difference between its two inputs, with feedback network gain set by external resistors. Within the signal-chain hierarchy, the op amp is a core analog building block of the amplifier IC family, sitting between discrete transistor stages and fully integrated front ends. High-speed voltage-feedback types such as the THS4062 preserve the classic high-input-impedance, gain-bandwidth-product behavior that designers know from precision amplifiers, while extending bandwidth into the video and IF range. Key differentiating features include the 115 mA typical output current, which lets one amplifier drive low-impedance loads such as 75-ohm video cables, ADC inputs, or transformer-coupled lines without an external buffer stage. The 75 MHz 0.1 dB gain-flatness bandwidth and very low differential gain (0.02%) and differential phase (0.02 degrees) errors make it well suited to composite video signal paths. A 40 ns settling time to 0.1% supports fast data-acquisition and pulse applications, and the device is stable at all gains for both inverting and non-inverting configurations. Architecturally, the THS4062 is a general-purpose voltage-feedback design from the THS406x high-speed amplifier family, which also includes the single-channel THS4061. Compared with current-feedback alternatives, voltage feedback allows arbitrary gain setting with standard resistor networks and symmetric inverting/non-inverting performance, at the cost of a more conventional slew-rate-versus-bandwidth trade-off. Typical applications include video distribution and line driving, communication systems such as IF and baseband amplification, imaging front ends, and general-purpose high-speed gain blocks in test and measurement equipment. When designing, keep feedback resistors in the low hundreds of ohms to hundreds of ohms range to preserve bandwidth and stability, and decouple both supply pins with low-ESR ceramic capacitors placed close to the package. This page synthesizes distributor pricing, verified drop-in alternatives within the THS4062 family, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-13.

USD $2.47 재고 있음

THS4062ID

THS4062ID - 180MHz Dual VFB Amplifier, 115mA | Texas Instruments

The Texas Instruments THS4062ID is a dual-channel high-speed voltage-feedback amplifier delivering 180 MHz bandwidth (-3 dB), a 400 V/us slew rate, and 115 mA (typ) of output drive current, housed in an 8-pin SOIC package. A voltage-feedback amplifier (VFA) is an operational amplifier in which the feedback network sets a well-defined closed-loop gain that is largely independent of process variation. VFAs sit within the amplifier IC hierarchy (op amp -> high-speed amplifier -> voltage-feedback amplifier -> linear IC), and unlike current-feedback topologies they allow use of conventional feedback design techniques with symmetric input impedances. Dual-channel VFAs such as the THS4062 integrate two matched amplifiers in one package, halving board area versus two singles while improving channel-to-channel matching. Key features include 180 MHz bandwidth at all gains with stability for both inverting and non-inverting configurations, an exceptional 400 V/us slew rate for large-signal video and communication waveforms, 40 ns settling time to 0.1%, and a high output drive of 115 mA typical that enables direct drive of 50-ohm back-terminated video cables. Video performance is a defining strength: 75 MHz 0.1 dB gain-flatness bandwidth, 0.02% differential gain and 0.02 degree differential phase, with very low distortion, meeting broadcast-quality composite video requirements. The supply range spans 4.5 V to 16 V (single or dual supplies), covering 5 V, +/-5 V and +/-12 V/+/-15 V rails. Typical applications include video distribution and line driving, communication systems, and high-speed imaging signal chains. Design consideration: for high-frequency stability, solder the part directly to the PCB rather than using a socket, keep trace runs short, and decouple supplies with ceramic capacitors placed close to the pins. This page synthesizes distributor pricing, drop-in alternative data, and practical design notes not found in the manufacturer datasheet.

USD $5.91 재고 있음

THS4062IDGNR

THS4062IDGNR - 180MHz Dual High-Speed Op-Amp | TI

The Texas Instruments THS4062IDGNR is a dual high-speed voltage-feedback operational amplifier delivering 180 MHz bandwidth (-3 dB), 400 V/us slew rate, and 115 mA (typ) output drive current per channel, housed in an 8-pin HVSSOP (DGN) package with exposed pad, rated from -40C to +85C on supplies from 9 V to 33 V (or +/-4.5 V to +/-16.5 V). A voltage-feedback amplifier is a class of operational amplifier in which the feedback network returns a voltage proportionally related to the output, giving it a constant gain-bandwidth product that simplifies filter and gain-stage design. Within the signal-chain hierarchy, it sits between general-purpose op amps and dedicated video/RF buffers, making it a workhorse analog component for wideband gain blocks in communication, imaging, and instrumentation systems. Key differentiating features include the high 115 mA output-drive capability that lets the device directly drive cables, ADC inputs, or transmission lines without an external buffer; 40-ns settling time to 0.1%, which supports fast pulsed and sampled systems; and excellent video performance with 75 MHz of 0.1 dB flatness bandwidth, 0.02% differential gain and 0.02-degree differential phase error. Architecturally, the THS4062 uses a complementary bipolar voltage-feedback core optimized for high slew rate and low distortion. Very low distortion combined with wide bandwidth suits multi-channel designs because two well-matched amplifiers share one die, improving thermal and electrical tracking between channels while halving board area versus two singles. Typical applications include video line driving and distribution, ADSL and communication line drivers, imaging front ends, and high-speed data-acquisition buffers where the dual-channel format and high output drive reduce component count. Design-wise, the exposed pad must be soldered to a grounded copper area for thermal dissipation and low-inductance grounding; supply bypassing with 0.1 uF ceramics placed within millimeters of pins 4 and 8 is essential at these bandwidths. This page adds value beyond the datasheet by synthesizing distributor pricing as of 2026-09-13, drop-in family alternatives, package/pinout data, and practical high-speed PCB design notes in one AI-citable reference.

USD $1.45 재고 있음

THS4522IPWR

THS4522 - 95MHz Low Power Dual FDA | Texas Instruments

The Texas Instruments THS4522 is a very low-power, dual-channel, fully differential amplifier (FDA) with rail-to-rail output and an input common-mode range that includes the negative rail. It operates from a single 2.5V to 5.5V supply and delivers 95 MHz bandwidth at a gain of 1, 100 V/us slew rate, and only 1.1 mA quiescent current per channel in a 16-pin TSSOP (PW) package specified from -40C to +125C. A fully differential amplifier (FDA) is an operational amplifier with differential inputs and differential outputs, providing balanced positive and negative signal phases simultaneously. FDAs are essential for driving high-performance ADCs because balanced signaling improves common-mode rejection and suppresses even-order harmonics. As a subset of operational amplifiers within analog signal processing, FDAs enable precise amplification, filtering, and level shifting in data converter front-end circuits. Key features include very low input voltage noise of 4.6 nV/rtHz, low distortion of -110 dBc at 1 MHz, and 55 mA output current. A power-down pin reduces quiescent current to 0.5 uA, and the rail-to-rail output maximizes dynamic range in single-supply systems. Negative rail input capability simplifies interfacing with ground-referenced sensors. The THS4522 uses a complementary bipolar process with a precision input stage, achieving 0.5 mV offset voltage and a 95 MHz gain bandwidth product. Full specification across the industrial temperature range ensures reliable operation in harsh environments, while the dual-channel TSSOP-16 configuration saves board space in multi-channel systems. Typical applications include driving high-speed ADCs in medical imaging, industrial process control, and test and measurement equipment. Low power consumption makes it suitable for portable battery-powered instruments, and rail-to-rail output with negative-rail input enables single-supply sensor interfaces. When designing with the THS4522, decouple supplies with 0.1 uF and 10 uF capacitors close to the VCC and VEE pins, use precision low-TCR feedback resistors to maintain gain accuracy, and bypass the VOCM pin to ground for optimal output common-mode control.

USD $2.10 재고 있음

THS4531A

THS4531A - Ultra-Low-Power Fully Differential Amplifier | TI

The THS4531A from Texas Instruments is an ultra-low-power, fully differential amplifier with rail-to-rail output and an input common-mode range that extends below the negative rail. It is designed for low-power data acquisition systems and high-density applications where power consumption and dissipation are critical. The device operates from a single supply of 2.5V to 5.5V or dual supplies of ±1.25V to ±2.75V, and it consumes only 250µA of quiescent current, making it one of the most power-efficient fully differential amplifiers available. A fully differential amplifier (FDA) is an operational amplifier with differential inputs and differential outputs, providing both the signal and its complement. This architecture inherently rejects common-mode noise and even-order harmonics, making it ideal for driving high-performance ADCs, transmitting signals over long lines, and conditioning sensor outputs. In the signal chain hierarchy, an FDA is a type of amplifier IC, which falls under analog integrated circuits, essential for precision analog signal processing. Key features of the THS4531A include a bandwidth of 36MHz at gain of 1, a slew rate of 200V/µs, and a low input voltage noise of 10nV/√Hz. The device also offers a high open-loop gain of 100dB and a common-mode rejection ratio (CMRR) of 100dB. Its rail-to-rail output stage maximizes dynamic range, and the input common-mode range below the negative rail allows direct interfacing with ground-referenced sensors in single-supply systems. The THS4531A uses a complementary bipolar process and a precision laser-trimmed input stage, ensuring low offset voltage (typically 100µV) and low drift. The device is stable with capacitive loads up to 100pF, and its internal common-mode feedback loop maintains output common-mode voltage at the desired level, simplifying ADC interface design. Typical applications include driving SAR and delta-sigma ADCs, low-power battery-operated instrumentation, portable medical devices, and single-ended to differential conversion for high-speed data acquisition. The device is also suitable for general-purpose differential signal conditioning in industrial and automotive systems. When designing with the THS4531A, ensure proper power supply decoupling with 0.1µF capacitors close to the supply pins. The output common-mode voltage can be set via the VOCM pin, and the feedback network must be balanced to maintain optimal performance.

USD $1.82 재고 있음

THS4532

THS4532 - Dual 0.25mA RRO Fully-Differential Amplifier | TI

The THS4532 is a dual, ultra-low-power, rail-to-rail output (RRO) fully-differential amplifier from Texas Instruments, designed for low-power data acquisition systems and high-density applications where power consumption and dissipation are critical. It operates over a supply range of 2.5V to 5.5V and draws only 250µA per channel, making it ideal for battery-powered and portable instrumentation. The device features an input common-mode range that extends below the negative rail, enabling single-supply operation with ground-referenced inputs. The THS4532 is available in a 16-pin TSSOP package (PW) and is characterized for operation over the extended industrial temperature range of -40°C to +125°C. A fully-differential amplifier (FDA) is an operational amplifier with differential inputs and differential outputs, providing both the signal and its complement. This architecture inherently rejects common-mode noise and even-order harmonics, making FDAs essential in high-resolution ADC driving, balanced signal transmission, and precision analog front-ends. The THS4532 belongs to the class of low-power FDAs, which are a subset of differential amplifiers, which in turn fall under the broader category of operational amplifiers and linear integrated circuits. Its rail-to-rail output stage maximizes dynamic range in low-voltage systems, while the input common-mode range below the negative rail simplifies single-supply designs. Key features of the THS4532 include ultra-low power consumption of 0.25mA per channel, rail-to-rail output swing, and an input common-mode range that includes the negative rail. The device also offers a wide supply range of 2.5V to 5.5V, making it compatible with 3.3V and 5V systems. The THS4532 is fully specified for operation over -40°C to +125°C, ensuring reliable performance in industrial environments. Its low power and small footprint make it suitable for high-density multichannel data acquisition systems. From a technical perspective, the THS4532 uses a precision CMOS architecture that achieves low offset and drift while maintaining ultra-low quiescent current. The differential output stage provides a balanced signal that can directly drive high-resolution SAR ADCs, such as the ADS8887, without the need for an external transformer. The device's common-mode feedback loop allows the user to set the output common-mode voltage independently, which is critical for matching the ADC's input range. The THS4532 also features internal compensation, simplifying the external component count. Typical applications include driving high-resolution ADCs in portable medical devices, battery-powered industrial sensors, and low-power audio processing. Its low power consumption extends battery life in wearable monitors and wireless sensor nodes. The THS4532 is also used in single-ended to differential conversion for precision measurement systems, where its low noise and high linearity preserve signal integrity. When designing with the THS4532, ensure proper power supply decoupling with 0.1µF capacitors close to the V+ and V- pins. The output common-mode voltage should be set to the ADC's reference midpoint to maximize dynamic range. For optimal noise performance, use metal-film resistors in the feedback network and keep the feedback paths short.

USD $1.85 재고 있음

THS4551IRGTR

THS4551IRGTR - 150MHz Fully Diff Amp | Texas Instruments

The Texas Instruments THS4551IRGTR is a low-noise, precision, 150 MHz fully differential amplifier (FDA) housed in a 16-pin VQFN (RGT) package with exposed thermal pad. It offers a -3 dB bandwidth of 150 MHz (G = 1 V/V), 1.5 nV/√Hz input voltage noise density, and rail-to-rail output swing that simplifies ADC driver designs in space-constrained systems. A fully differential amplifier is an op-amp topology that converts a single-ended or differential input signal into a balanced differential output centered around a settable common-mode voltage. FDAs sit in the signal chain between sensor/transducer signal conditioning and high-speed, high-resolution analog-to-digital converters (ADCs). They reject common-mode noise and even-order harmonics, drive differential ADCs cleanly, and enable DC-coupled paths through SAR or delta-sigma converters - placing them in the broader hierarchy of operational amplifier -> amplifier IC -> analog signal chain -> semiconductor. Key features include 150 MHz small-signal bandwidth, 50 V/µs slew rate, 1.5 nV/√Hz voltage noise, 100 dB DC open-loop gain, and a 2.7 V to 5.4 V single-supply operating range. The integrated VOCM pin sets the output common-mode voltage independently of the input, simplifying interface to ADCs with 0.5 V to 2.5 V common-mode requirements. Internal common-mode feedback preserves output balance across frequency, eliminating the need for precision matched external resistors. Architecturally the device combines a precision input stage with a class-AB output stage capable of driving 2 VPP into 200 Ω differential loads (typical for 16-bit ADCs). The 1.5 nV/√Hz noise floor makes it suitable for 16-bit ADC reference designs, and the wide bandwidth handles 18-bit SAR converters sampling above 1 MSPS. Typical applications include 16-bit to 20-bit ADC drivers, precision instrumentation front-ends, transducer signal chains, and active filters. The single-ended-to-differential conversion is ideal for driving AD7768, ADS131A04, and similar precision SAR converters in measurement equipment. When designing with this part, use a feedback resistor network that sets the desired gain and a VOCM bypass capacitor of 0.1 µF for noise decoupling. Verify output common-mode voltage tracks VOCM input over frequency to avoid ADC distortion. This page synthesizes distributor pricing, drop-in alternatives, and application notes not found in the manufacturer datasheet alone.

USD $3.85 재고 있음

THS4551IRGTT

THS4551IRGTT - 150MHz Low-Noise Fully Diff Amplifier | Texas Instruments

The Texas Instruments THS4551IRGTT is a low-noise, precision, 150-MHz, fully differential amplifier (FDA) housed in a 16-pin VQFN (RGT) package with exposed thermal pad, optimized for driving high-speed, differential-input ADCs in industrial, instrumentation, and communications signal chains. It delivers 150 MHz of unity-gain bandwidth, 50 ns settling time to 0.1%, 200 V/us slew rate, and -100 dB low total harmonic distortion plus noise (THD+N) at 2 VPP and 100 kHz, while operating from a single 2.7 V to 5.4 V supply with rail-to-rail output swing. Its wideband architecture combines precision DC trim with a low input-referred voltage noise of 3.3 nV/sqrt(Hz) and an integrated output common-mode control loop that tightly regulates the output common-mode voltage set by the VOCM pin, eliminating the need for external precision resistor matching on the feedback network. A fully differential amplifier (FDA) is a specialized op-amp topology that converts a single-ended or differential input signal into a balanced differential output, where each output swings symmetrically around a programmable common-mode voltage. FDAs sit at the boundary between the analog front end (sensor/transducer) and the differential input stage of a high-speed ADC, and they are essential for maximizing spurious-free dynamic range (SFDR) and signal-to-noise ratio (SNR) in modern data-acquisition chains. Compared to a single-ended op-amp, an FDA inherently rejects common-mode noise from the analog supply, suppresses even-order harmonics, and directly interfaces with differential ADCs without lossy transformer coupling. Key features of the THS4551IRGTT include a wide 2.7 V to 5.4 V single-supply operating range, a flexible output common-mode control input (VOCM) that supports direct DC coupling to the ADC common-mode voltage, low input bias current, integrated shutdown bias current control, and 8 kV HBM ESD protection. The device is characterized for operation across the industrial -40C to +125C temperature range and is fabricated in TI's proprietary high-speed complementary BiCMOS process. The 3x3 mm VQFN package exposes the thermal pad to a top-side copper pour, allowing continuous full-bandwidth operation at 5 V without exceeding the 175C junction limit. Typical applications of the THS4551IRGTT include driving successive-approximation register (SAR) and delta-sigma ADCs in industrial process control, test and measurement data acquisition, high-density medical imaging front ends, and broadband communications baseband signal chains. Its low noise and high linearity also make it suitable for active balun replacement, audio line drivers, and I/Q modulator interface networks in software-defined radio (SDR) systems. When designing with this device, place the input and feedback network components as close to the IC pins as possible and follow the datasheet differential-input filter recommendations to preserve bandwidth and maximize SFDR; a small mismatch in the feedback resistors will degrade the common-mode rejection ratio (CMRR) at the frequency of interest, so 0.1% tolerance parts are recommended. This page synthesizes distributor pricing, parametric drop-in alternatives, application-specific design notes, and pinout guidance not consolidated on the manufacturer datasheet front page.

USD $3.52 재고 있음

THS7375

THS7375 - 4-Channel SDTV Video Amplifier | Texas Instruments

The THS7375 is a low-power, single-supply, 3 V to 5 V four-channel integrated video buffer from Texas Instruments, fabricated using the complementary Silicon-Germanium (SiGe) BiCom3X process. It is available in a lead-free and green (RoHS) compliant TSSOP-14 package. The device incorporates a sixth-order Butterworth filter that can be bypassed, making it useful as a digital-to-analog converter (DAC) reconstruction filter. With a rail-to-rail output stage and a fixed gain of 5.6 V/V (15 dB), the THS7375 is designed for SDTV video applications, providing excellent image quality and driving capability for both AC and DC coupled loads. A video amplifier is an electronic amplifier that processes video signals, typically providing gain, buffering, and filtering to ensure signal integrity over transmission lines. In the signal chain, the THS7375 sits between a video DAC or encoder and the output connector, performing reconstruction filtering and line driving. It belongs to the category of integrated video buffers, which are essential in consumer electronics, set-top boxes, DVD players, and video surveillance systems. The THS7375's integrated filters eliminate the need for external passive components, simplifying design and reducing board space. Key features include a 6th-order Butterworth filter with a cutoff frequency suitable for SDTV (standard-definition television) signals, a fixed gain of 5.6 V/V, and the ability to drive two lines per channel or 75-ohm loads. The device operates from a single 3 V to 5 V supply, making it compatible with common digital logic levels. The rail-to-rail output stage ensures maximum output swing, and the low power consumption makes it ideal for battery-powered or power-sensitive applications. Technically, the THS7375 uses the BiCom3X process, which combines bipolar and CMOS transistors on a silicon-germanium substrate, offering high-speed performance with low power. The integrated filter is a 6th-order Butterworth type, providing a flat passband and sharp roll-off to remove out-of-band noise and aliasing artifacts. The device also features an internal gain of 5.6 V/V, which is optimized for driving video loads with proper termination. Typical applications include video buffer and line driver for SDTV signals in set-top boxes, DVD players, video recorders, and surveillance systems. It is also suitable for driving video signals from DaVinci processors and other video encoders. The THS7375's ability to drive two lines per channel allows for flexible routing in complex video distribution systems. When designing with the THS7375, ensure proper power supply decoupling with a 0.1 uF ceramic capacitor close to the VCC pin. The input should be AC-coupled if the source has a DC offset, and the output should be terminated with 75-ohm resistors to match the characteristic impedance of the cable. The filter bypass pin can be used to disable the internal filter if external filtering is preferred.

USD $0.78 재고 있음

하위 카테고리

제품 (31127)