집적 회로

하위 카테고리

📁 ADC/DAC 2518 제품 📁 증폭기 IC 793 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 287 제품 📁 DSP 962 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1568 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18688 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32725)

XC7A200T-3FBG676I - Artix-7 FPGA, 740K Logic Cells | AMD
XC7A200T-3FBG676I

XC7A200T-3FBG676I - Artix-7 FPGA, 740K Logic Cells | AMD

The AMD XC7A200T-3FBG676I is a high-performance Artix-7 family FPGA featuring 740K logic cells, 13.3 Mb of Block RAM, and 740 DSP slices in a 676-ball FCBGA package. It operates with a core voltage of 1.0V and supports I/O standards up to 3.3V. Data verified as of 2026-08-04. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs sit between ASICs (application-specific) and microprocessors (fixed instruction set) in the design hierarchy, offering reconfigurability and parallel processing. The Artix-7 family is optimized for high-performance, low-power applications, balancing logic density, DSP capability, and I/O flexibility. Key features include 740K logic cells, 13.3 Mb of Block RAM, 740 DSP slices, and support for PCIe Gen2, Gigabit transceivers, and DDR3 memory interfaces. The -3 speed grade provides the highest performance in the Artix-7 family, with 6.6 Gb/s transceivers and 550 MHz clocking. The industrial temperature grade (-I) supports operation from -40C to +100C, making it suitable for harsh environments. The XC7A200T-3FBG676I is built on 28nm process technology, offering a balance of performance and power efficiency. It includes hardened memory controllers for DDR3, and configurable logic blocks with 6-input LUTs. The device supports partial reconfiguration and has built-in analog-to-digital converter (XADC) for system monitoring. Typical applications include software-defined radio, medical imaging, industrial motor control, and high-performance computing acceleration. The high DSP count and transceiver speed make it ideal for signal processing and high-throughput data paths. When designing with this FPGA, ensure adequate decoupling capacitors on all power rails and follow the recommended power-up sequence. The configuration bitstream can be stored in external SPI flash or loaded via JTAG. Thermal management is critical at high utilization; use the exposed pad and proper airflow. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the AMD datasheet, providing a comprehensive resource for engineers evaluating the XC7A200T-3FBG676I.

USD $390.00 재고 있음
XC7A25T-1CPG238C - Artix-7 FPGA, 23K Logic Cells | AMD
XC7A25T-1CPG238C

XC7A25T-1CPG238C - Artix-7 FPGA, 23K Logic Cells | AMD

The AMD XC7A25T-1CPG238C is a 28nm Artix-7 Field Programmable Gate Array (FPGA) delivering 23,360 logic cells with 1,658,880 system gates, housed in a 238-ball Low-Profile Fine-Pitch Ball Grid Array (LFBGA, CPG238) package. It integrates 112 user I/O banks, 1,658,880 system gates, and operates at speed grade -1 with commercial temperature grade (0C to +85C). The device targets high-performance, low-power, cost-sensitive applications where transceiver integration and DSP throughput matter. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit whose digital logic, routing, and I/O behavior are defined by a user-supplied configuration bitstream after manufacture. Within the broader programmable-logic taxonomy, FPGAs sit above CPLDs (less complex, non-volatile) and below ASICs (fully custom, non-programmable). The Artix-7 family is positioned for low-power and high DSP/logic throughput at 28nm, complementary to Kintex-7 (price-performance) and Virtex-7 (highest performance) within AMD's 7-series portfolio. Differentiating specifications for the XC7A25T include 1,658,880 system gates, 112 user I/O pins, and a -1 speed grade that balances timing margin versus the -2/-3 grades. The CPG238 package is one of AMD's small-footprint, low-cost BGA options for the Artix-7 family, optimized for the smallest PCB footprint while preserving full Artix-7 fabric features. The commercial temperature grade suits indoor, lab, and consumer environments. Typical applications span industrial motor control and machine vision, software-defined radio (SDR) front ends, low-cost video processing pipelines, embedded digital signal processing, and portable test & measurement instruments. Compared with Spartan-6, Artix-7 roughly doubles logic density per watt and adds higher-rate transceivers, making it a frequent upgrade path. The device is supported by AMD Vivado Design Suite and legacy ISE, with free WebPack editions supporting the XC7A25T device. When designing with the XC7A25T-1CPG238C, ensure the PCB has a BGA fan-out with matched-length impedance-controlled traces for high-speed transceiver signals. Decoupling must follow AMD's UG475 package guidelines, and the configuration mode (SPI flash, JTAG, or SelectMAP) should be finalized before schematic freeze because pin assignments differ per mode. Pricing as of 2026-10-11 reflects current distributor quotes.

USD $89.60 재고 있음
XC7A25T-1CPG238I - Artix-7 FPGA, 23K Logic Cells, 238-BGA | AMD
XC7A25T-1CPG238I

XC7A25T-1CPG238I - Artix-7 FPGA, 23K Logic Cells, 238-BGA | AMD

The AMD (Xilinx) XC7A25T-1CPG238I is an Artix-7 Field Programmable Gate Array (FPGA) IC delivering 23,360 logic cells and 112 user I/Os in a 238-ball CSPBGA (CPG) package. Built on TSMC's 28 nm HKMG process, the Artix-7 family targets cost-sensitive and power-conscious applications requiring high DSP throughput and modest transceiver capability. This specific variant is the -1 speed grade and the I (industrial) temperature grade, supporting operation across -40C to +100C ambient conditions. An FPGA (Field Programmable Gate Array) is a programmable logic device that combines configurable logic blocks, programmable interconnect, and dedicated silicon resources such as Block RAM, DSP slices, and high-speed transceivers. Within the broader taxonomy, FPGAs sit between ASICs (fixed-function, high NRE) and general-purpose microcontrollers; FPGAs offer hardware-level parallelism and are deployed when the design must be re-programmed in the field or when deterministic latency is required. The Artix-7 series specifically bridges mid-range Spartan-6 and high-end Kintex-7 devices, balancing logic density with low static power. Key features of the XC7A25T-1CPG238I include 23,360 logic cells (approximately 3,640 Logic Slices / 29,680 LUTs of fabric), 1,658,880 bits of Block RAM, 45 DSP48A1 slices for high-speed arithmetic, and integrated GTP serial transceivers supporting up to 6.6 Gb/s line rates. The device operates across an extended junction temperature range typical of industrial embedded systems. The 238-ball CSPBGA package uses a 10x10 mm footprint optimized for high-density PCB routing. Architecturally, the Artix-7 uses a 6-input LUT fabric with dedicated carry chains, distributed RAM in slices, and on-chip Block RAM tiles supporting true dual-port access. The 28 nm HKMG process delivers up to 50% lower static power versus the prior 40 nm Spartan-6 generation, making the A25T family attractive for portable, fan-cooled, or sealed industrial enclosures. Typical applications include industrial machine vision, motor control and robotics, medical imaging front-ends, software-defined radio baseband, low-cost serial connectivity bridges, and embedded vision processing pipelines. The device is supported by AMD Vivado Design Suite and the older ISE Design Suite, with free WebPack licenses covering the A25T. When designing with the XC7A25T-1CPG238I, allocate GTP transceiver and Block RAM usage early, as these dedicated resources dictate device utilization and timing closure. The 238-ball CSPBGA requires PCB substrate design with matched impedance for the GTP lanes and proper decoupling; this part uses Xilinx's standard 7-series configuration scheme, which enables drop-in migration between A35T, A50T, and A100T parts in the same package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $48.30 재고 있음
XC7A35T-1CS324I - Artix-7 FPGA, 33K Logic Cells, 210 I/O, 324-BGA | AMD
XC7A35T-1CS324I

XC7A35T-1CS324I - Artix-7 FPGA, 33K Logic Cells, 210 I/O, 324-BGA | AMD

The AMD (formerly Xilinx) XC7A35T-1CS324I is a member of the Artix-7 Field Programmable Gate Array (FPGA) family, providing 33,280 logic cells organized in 2,600 logic blocks plus 1,843,200 bits of block RAM, 90 DSP48 slices, and 4 high-speed GTP transceivers. Built on a 28nm high-k metal gate (HKMG) process, it is offered in a 324-ball Chip-Scale BGA (CSBGA / CSG324) package with 210 user I/Os and a -1 speed grade, industrial temperature rating. An Artix-7 FPGA is a programmable logic device that sits within the broader category of programmable logic ICs, alongside CPLDs and FPGAs from other families. FPGAs sit hierarchically below programmable logic, below semiconductor ICs, and below integrated circuits. Artix-7 specifically targets the industry's best performance-per-watt for cost-sensitive applications, balancing high-throughput DSP, high-speed serial connectivity, and low static power consumption in a low-cost package family. Key differentiating specifications include 33,280 logic cells (5,200 logic slices, 4 clock-management tiles), 1,843,200 bits of on-chip block RAM, 240 Kbits distributed RAM, 90 dedicated DSP48E1 slices running at up to 628 GigaMACs/s, and 4 GTP multi-gigabit transceivers supporting up to 6.6 Gb/s. The device supports up to 210 user I/Os across multiple voltage standards (LVCMOS, LVDS, SSTL) and a 12-bit 1 Msps XADC analog front end. Architecturally the chip is built around 28nm HKMG CMOS logic, configurable logic blocks (CLBs), 36 Kb dual-port BRAM blocks, and hard PCIe Gen2 endpoint blocks. Compared with prior Spartan-6 generations, Artix-7 delivers roughly 2x performance per watt and roughly 35% lower total power, enabling battery, fan-less, or thermally constrained designs without sacrificing DSP or serial bandwidth. Typical applications span cost-sensitive digital signal processing, motor control, industrial camera and machine-vision pipelines, software-defined radio front ends, low-cost PCIe endpoint cards, and low-power embedded video processing. The 4 GTP lanes and 90 DSP slices make this device especially attractive for thin client video transcoding, portable ultrasound, and IoT edge nodes. When designing with this part, plan for a 1.0V core, 1.8V/2.5V/3.3V auxiliary supplies, and configure the GTP reference clocks using the dedicated MGTREFCLK pins; do not remap them to GPIO at the schematic stage. JTAG and the SPI configuration interface both support multi-device daisy chains for board-level debugging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the bare manufacturer product page.

USD $148.00 재고 있음
XC7A35T-1CSG324C - Artix-7 FPGA, 33k Logic Cells, 324-BGA | AMD
XC7A35T-1CSG324C

XC7A35T-1CSG324C - Artix-7 FPGA, 33k Logic Cells, 324-BGA | AMD

The AMD Xilinx XC7A35T-1CSG324C is a member of the Artix-7 family of field-programmable gate arrays (FPGAs) built on a 28 nm process, offering 33280 logic cells, 1843200 system gates, and 210 user I/Os in a 324-ball Lid Flip-chip Ball Grid Array (CSG324 / 324-LFBGA, CSPBGA) package. It combines high performance per watt with a 1.0 V core supply and supports commercial (0 C to +85 C) ambient operation. An FPGA (Field-Programmable Gate Array) is a programmable logic device that contains configurable logic blocks, programmable interconnect, and I/O cells, allowing engineers to implement custom digital circuits, parallel processing pipelines, and hardware accelerators. FPGAs sit within the broader taxonomy of programmable logic devices (PLDs) -> programmable logic -> digital ICs -> semiconductors. The Artix-7 family targets cost-sensitive, high-volume applications requiring moderate logic density combined with low power consumption. Key features include 90 DSP48E1 slices for high-throughput fixed-point signal processing, 2.1 Mb of block RAM, 5 clock management tiles (CMTs) each containing one mixed-mode clock manager (MMCM) and one phase-locked loop (PLL), and integrated configuration logic supporting multi-boot and bitstream encryption. The Artix-7 architecture delivers up to 240 DSP GMACs at sub-watt power levels, making it well suited for power-constrained DSP and signal chain designs. The XC7A35T-1CSG324C features AMD Xilinx's proven 7-series transceiver-less fabric, where "35T" indicates the Artix-7 family with 33k logic cells, the "-1" speed grade reflects timing characteristics for industrial-grade applications, "CSG324" specifies the 324-ball FBGA lid package, and "C" denotes commercial temperature grade. The device exposes GTPs are absent from this device, but offers extensive SelectIO high-performance I/O supporting LVCMOS, LVTTL, SSTL, and HSTL standards up to 1.6 Gbps in some configurations. Typical applications include industrial motor control, medical imaging front-ends, software-defined radio (SDR) receivers, low-cost video processing pipelines, and portable test and measurement equipment. Designers favor the Artix-7 family for its balance of cost, density, and DSP capability in mid-range embedded designs. When migrating between Artix-7 densities, verify pinmap and clock routing using AMD's Pinout Files resource - higher-density parts like the XC7A50T and XC7A75T in the same CSG324 package are footprint-compatible. The XC7A35T's GTP transceivers are NOT available; for high-speed serial links consider migrating to Kintex-7 or Spartan-6 with GTP/GTX support. This page synthesizes distributor pricing, drop-in alternatives within the same CSG324 footprint, and practical design notes that extend beyond the manufacturer datasheet to support engineering decisions.

USD $49.20 재고 있음
XC7A35T-1FG484I - Artix-7 FPGA 33K LEs, 484-BGA | AMD/Xilinx
XC7A35T-1FG484I

XC7A35T-1FG484I - Artix-7 FPGA 33K LEs, 484-BGA | AMD/Xilinx

The AMD/Xilinx XC7A35T-1FG484I is a member of the Artix-7 Field Programmable Gate Array (FPGA) family built on a 28nm CMOS process, offering 33,280 logic cells, 5,200 logic slices of 6-input LUTs, and 1,843,200 bits of block RAM in a 484-ball Flip-Chip BGA package rated for the industrial temperature range (-40C to +100C). An FPGA (Field Programmable Gate Array) is a reprogrammable semiconductor device whose logic fabric, interconnect, and I/O can be configured by the designer after manufacture, distinguishing it from fixed-function ASICs and microcontrollers. Within AMD's programmable-logic hierarchy it sits in the Artix-7 family below Kintex-7 and Virtex-7, optimized for cost-sensitive, low-power, high-volume serial connectivity such as PCIe Gen2 and GTP transceivers. The Artix-7 family itself is one tier inside AMD's broader Adaptive Compute portfolio, which now includes Versal ACAPs. Key headline parameters of the XC7A35T include 4 transceivers (GTP) capable of up to 3.75 Gbps, 90 DSP48 slices for high-throughput arithmetic, and 250 user I/O pins spread over 4 I/O banks supporting 1.2V to 3.3V single-ended standards plus LVDS pairs. Integrated hard IP includes a single PCIe Gen2 endpoint block and Configuration logic supporting 28 nm SelectIO primitives. The FPGA is implemented on a 28nm high-k metal-gate CMOS process providing static power roughly 50% lower than the prior 45nm Spartan-6 family while delivering up to 1.5x higher performance per watt. The -1 speed grade targets cost-optimized designs; -2 and -3 grades offer higher Fmax at additional cost. The Flip-Chip BGA-484 (FG484 / FGG484) package uses 1.0mm ball pitch and shares a common footprint with the XC7A50T and XC7A75T in the same family, easing design migration. Typical applications include low-cost PCIe endpoint boards, motor and motion control, video processing pipelines, industrial machine vision, software-defined radio front-ends, and portable medical imaging. Artix-7 transceivers and DSP slices make it well suited to any mid-density, low-power serial-link design. When designing with this device, pair it with Xilinx Vivado Design Suite for synthesis, place-and-route and bitstream generation, and use an AMD Xilinx JTAG programmer such as the Platform Cable USB II for configuration. Confirm junction temperature stays below 100C for the industrial-grade variant and ensure the PCB footprint accommodates the 1.0 mm-pitch BGA. This page synthesizes distributor pricing, drop-in alternatives within the same 484-FBGA footprint, and practical design notes not found in the manufacturer datasheet.

USD $112.75 재고 있음
XC7A35T-1FGG484I - Artix-7 FPGA, 250 I/O | AMD
XC7A35T-1FGG484I

XC7A35T-1FGG484I - Artix-7 FPGA, 250 I/O | AMD

The AMD XC7A35T-1FGG484I is an Artix-7 Field Programmable Gate Array (FPGA) from the 28nm Artix-7 family, offering 33,280 logic cells, 250 user I/Os, and 1,843,200 bits of block RAM in a 484-ball FBGA (23x23mm) package. It operates over the industrial temperature range of -40°C to +100°C (TJ) and is designed for cost-sensitive, high-volume applications requiring high performance-per-watt. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. Unlike fixed-function ASICs, FPGAs contain programmable logic blocks, configurable I/O, and routing resources that allow designers to implement complex digital systems in hardware. The Artix-7 family sits between the low-cost Spartan-7 and the higher-performance Kintex-7 in AMD's 7-series portfolio, targeting applications where cost and power efficiency are paramount. Key features of the XC7A35T-1FGG484I include 250 user I/O pins, 2,600 Configurable Logic Blocks (CLBs), 33,280 logic cells, and 1,843,200 total RAM bits. The device integrates five Clock Management Tiles (CMTs) with MMCM and PLL blocks for flexible clock generation, and supports multiple I/O standards including LVCMOS, LVDS, and HSTL. The 484-ball FBGA package provides a compact 23x23mm footprint with 0.8mm ball pitch, enabling dense PCB layouts. The Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process technology, delivering up to 50% lower power consumption compared to previous generations. The device supports partial reconfiguration, allowing dynamic updates to logic functions without powering down the system. With support for AMD Vivado Design Suite, designers can implement complex designs using a mature and comprehensive toolchain. Typical applications include industrial motor control, medical imaging, software-defined radio, video processing, and automotive driver assistance systems. The industrial temperature grade makes it suitable for harsh environments where reliability is critical. When designing with this device, ensure adequate decoupling capacitors on all power rails and follow the PCB layout guidelines in UG475 for the 484-FBGA package to maintain signal integrity.

USD $15.10 재고 있음
XC7A35T-1FT256I - 33,280-Cell Artix-7 FPGA | AMD
XC7A35T-1FT256I

XC7A35T-1FT256I - 33,280-Cell Artix-7 FPGA | AMD

AMD XC7A35T-1FT256I is an Artix-7 field-programmable gate array (FPGA) with 33,280 logic cells, 170 I/O, 90 DSP slices, and 1,800 Kb of block RAM in a 256-ball FTBGA package. The device targets 1 V operation and is identified as an industrial-temperature, -1 speed-grade device. According to the retrieved DigiKey and Mouser listings, it is the XC7A35T device in the 256-LBGA/FTBGA package format. An FPGA is a programmable digital integrated circuit in the semiconductor family of configurable logic devices. Artix-7 combines programmable logic fabric, block RAM, DSP resources, programmable I/O, and high-speed serial transceivers on one device. This hierarchy—Artix-7 → FPGA → programmable logic device → semiconductor—supports parallel logic, control, signal-processing, communications, and embedded-system designs without changing the physical device for a new bitstream. Key verified features include 33,280 logic cells, 170 I/O, 90 DSP slices, 1,800 Kb of block RAM, 28 nm technology, and a 1 V supply designation. The Artix-7 family is suited to compact industrial, communications, instrumentation, embedded control, and digital signal-processing systems. The verified snippets do not provide complete operating-temperature, transceiver, power, package-ball, and lifecycle details, so those values are not inferred here. The part number suffix identifies the important ordering configuration. The verified data identifies XC7A35T as the device family and the 1FT256I ordering code as the target MPN, while comparison data also identifies FTG256 package variants. Engineering equivalence must therefore be confirmed against the AMD package pinout files and UG475 rather than inferred from family naming alone. Typical applications include industrial control, communications, embedded processing, instrumentation, and DSP-assisted logic designs. In each case, the FPGA can implement parallel datapaths and control functions while using its block RAM for buffering and its DSP slices for arithmetic. The design should also account for configuration memory, clocking, banked supply rails, decoupling, signal integrity, thermal management, and programming support. For PCB implementation, place decoupling and configuration-support circuitry according to the verified AMD package data, maintain the required power and ground distribution, and route high-speed signals with controlled impedance and return paths. Do not substitute an XC7A35T variant solely because it has the same family name; verify package, speed grade, temperature grade, voltage options, pin compatibility, and the complete device identifier. This page combines the verified distributor identity, package and resource information, source links, and explicit data gaps to support engineering selection. It does not invent missing electrical limits, pricing, lifecycle claims, or pin assignments.

견적 요청 재고 있음
XC7A35T-1FTG256C - Artix-7 FPGA, 33K Logic Cells | AMD Xilinx
XC7A35T-1FTG256C

XC7A35T-1FTG256C - Artix-7 FPGA, 33K Logic Cells | AMD Xilinx

The AMD Xilinx XC7A35T-1FTG256C is an Artix-7 family Field Programmable Gate Array (FPGA) featuring 33,280 logic cells, 90 DSP slices, 1,800 Kb of block RAM, and 170 user I/Os, housed in a 256-ball FTBGA (FTG256) package measuring 17x17 mm with 1.0 mm ball pitch. Built on TSMC's 28 nm HPL (High-Performance, Low-Power) HKMG process technology, the device operates from a 0.95 V to 1.05 V core supply and supports commercial temperature grade 0C to +85C. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit whose digital logic, interconnect, and I/O behavior are configured by the user after manufacture via a hardware description language (HDL) bitstream. FPGAs sit in the broader taxonomy of programmable logic devices alongside CPLDs and are widely used for parallel DSP, custom I/O protocols, and rapid prototyping where ASIC NRE costs are unjustified. The Artix-7 family is positioned as the low-power, cost-optimized member of the Xilinx 7-Series, between the high-performance Virtex-7 and the lower-cost Spartan-6 predecessors. Key features include four GTP transceivers supporting up to 6.6 Gb/s line rates (artix-7 35T family), 5 MMCM/PLL clock management tiles, an integrated 12-bit 1 Msps XADC analog-to-digital converter, and on-chip configuration memory supporting multiple boot modes including SPI, BPI, JTAG, and Master/Slave SelectMAP. The Artix-7 35T variant specifically adds the 4 GTP serial transceivers that the smaller 15T and non-T parts omit. Typical applications include software-defined radio (SDR) leveraging the 90 DSP slices for high-performance modulation and filtering, machine vision and industrial imaging pipelines using parallel sensor interfaces, motor control and industrial drive firmware acceleration, low-cost serial connectivity bridges (PCIe Gen2 endpoint, SFP/QSFP via GTP), and portable/handheld test instrumentation where Artix-7's power efficiency at 100K-200K LUT scale is decisive. The 256-ball FTG256 package is the largest pin-count option for this family outside the 484-ball FBG484. When designing with this device, allocate at least 4 layers and 2 oz copper for power and ground planes to support the simultaneous-switching currents of 170 user I/Os. Decouple each GTP transceiver supply pin (MGTAVCC/MGTAVTT) with 0.1 uF and 4.7 uF ceramic capacitors placed within 5 mm of the BGA ball. Use Xilinx Vivado 2025.2 or later for synthesis and bitstream generation. This page synthesizes distributor pricing, drop-in Artix-7 35T alternatives in the same FTG256 footprint, and practical design notes not consolidated in the manufacturer datasheet.

USD $84.20 재고 있음
XC7A35T-2CPG236I - Artix-7 FPGA 33280 Logic Cells | AMD
XC7A35T-2CPG236I

XC7A35T-2CPG236I - Artix-7 FPGA 33280 Logic Cells | AMD

The AMD XC7A35T-2CPG236I is an Artix-7 Field Programmable Gate Array (FPGA) from the 7 series family, offering 33,280 logic cells, 2,600 Configurable Logic Blocks (CLBs)/LABs, and 106 user I/O pins. It is housed in a 238-ball LFBGA/CSPBGA package and operates from a 0.95V to 1.05V core supply voltage. This device is designed for low-cost, high-volume applications requiring a balance of logic capacity, DSP capability, and I/O flexibility. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the blocks to be wired together in different configurations. This reconfigurability makes FPGAs ideal for prototyping, low-to-mid volume production, and applications where design updates are expected. The Artix-7 family sits within the broader FPGA hierarchy, positioned as the low-power, low-cost member of the Xilinx 7 series, which also includes the higher-performance Kintex-7 and Virtex-7 families. Key features of the XC7A35T-2CPG236I include 1,843,200 total RAM bits, 106 user I/Os, and support for multiple clock management tiles (CMTs) with MMCM and PLL. The device is part of the Artix-7 series, which is optimized for the lowest power and cost at 28nm, delivering the highest performance-per-watt fabric and AMS integration in a low-cost FPGA. The -2 speed grade indicates a mid-range performance level, while the 'I' suffix denotes an industrial temperature range (-40°C to +100°C). Technically, the Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, providing a balance of logic density and power efficiency. The device includes dedicated DSP48E1 slices for signal processing, block RAM for data storage, and SelectIO technology supporting various I/O standards. The 238-ball CSPBGA package measures 17mm x 17mm with a 0.8mm ball pitch, enabling compact PCB designs. Typical applications include motor control, industrial networking, software-defined radio, and video/image processing. The 106 I/Os and 1.8Mbit of block RAM make it suitable for bridging, protocol conversion, and real-time control tasks. The industrial temperature range supports deployment in harsh environments. When designing with this FPGA, careful attention to power supply decoupling is essential. The core voltage (VCCINT) must be clean and stable within 0.95V to 1.05V, and multiple decoupling capacitors should be placed near the device pins to minimize noise and ensure reliable configuration.

USD $42.00 재고 있음
XC7A35T-2FGG484C - Artix-7 FPGA 33280 Cells | AMD
XC7A35T-2FGG484C

XC7A35T-2FGG484C - Artix-7 FPGA 33280 Cells | AMD

The AMD XC7A35T-2FGG484C is a member of the Artix-7 FPGA family, built on a 28nm process. It features 33,280 logic cells, 250 user I/Os, and 1,843,200 bits of block RAM, all housed in a 484-ball FBGA package. This device is designed for cost-sensitive, high-volume applications that require a balance of logic density, performance, and low power consumption. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs are part of the broader category of programmable logic devices, which also includes CPLDs. They are used in a wide range of applications where flexibility, parallel processing, and rapid prototyping are needed, from industrial motor control to communications infrastructure. Key features of the XC7A35T-2FGG484C include 250 user I/Os, 33,280 logic cells, and 1,843,200 bits of block RAM. The -2 speed grade offers a balance between performance and power, making it suitable for many mid-range applications. The 484-ball FBGA package provides a good compromise between I/O count and board area, and is a popular choice for designs that need more I/Os than smaller packages but do not require the density of larger ones. Technically, the Artix-7 family is optimized for the lowest power and cost at 28nm, delivering the highest performance/watt fabric and AMS integration. The device includes hardened memory controllers, DSP slices, and clock management tiles (MMCM and PLL) that support a wide range of system requirements. The 28nm process technology enables high logic density and low static power, which is critical for battery-powered and thermally constrained applications. Typical applications for the XC7A35T-2FGG484C include industrial motor control, software-defined radio, medical imaging, and video processing. Its combination of logic capacity, I/O count, and cost-effectiveness makes it ideal for these and other high-volume, cost-sensitive designs. When designing with this device, careful attention should be paid to power supply decoupling and the configuration interface. The FPGA requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a configuration source (e.g., SPI flash) to boot. Proper decoupling and a clean power-up sequence are essential for reliable operation.

USD $16.90 재고 있음
XC7A35T-2FGG484I - Artix-7 FPGA 33K Logic Cells | AMD
XC7A35T-2FGG484I

XC7A35T-2FGG484I - Artix-7 FPGA 33K Logic Cells | AMD

The AMD XC7A35T-2FGG484I is a member of the Artix-7 family of Field Programmable Gate Arrays (FPGAs), built on a 28nm process technology. It features 33,280 logic cells, 250 user I/O pins, and 1,843,200 bits of block RAM, all housed in a 484-ball BGA (FBGA) package. This device is optimized for low power and cost-sensitive applications, delivering high performance per watt in a compact footprint. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. FPGAs are part of the broader category of programmable logic devices (PLDs), which also includes CPLDs. They consist of an array of programmable logic blocks, interconnects, and I/O blocks, allowing for highly flexible digital circuit implementation. FPGAs are widely used in prototyping, signal processing, and applications requiring parallel processing or custom hardware acceleration. The XC7A35T-2FGG484I offers 250 user I/Os, 5 clock management tiles (CMTs) with MMCM and PLL, and 90 DSP slices for digital signal processing. It supports various I/O standards including LVCMOS, LVDS, and HSTL, and includes integrated memory controller support for DDR3. The device operates from a 1.0V core voltage and is available in the industrial temperature grade (-40°C to +100°C). Architecturally, the Artix-7 family uses a 6-input look-up table (LUT) architecture, providing high logic density and performance. The device includes 5 clock management tiles, each containing a mixed-mode clock manager (MMCM) and a phase-locked loop (PLL), enabling flexible clock generation and jitter filtering. The 90 DSP slices support up to 25x18 multipliers, making it suitable for digital signal processing tasks. Typical applications include industrial motor control, software-defined radio, medical imaging, and video processing. The device's low power consumption and cost-effectiveness make it ideal for high-volume applications where performance per watt is critical. When designing with this FPGA, careful attention must be paid to power supply decoupling and PCB layout to ensure signal integrity at high I/O speeds. The device requires multiple supply voltages (VCCINT, VCCAUX, VCCO), and proper sequencing is essential for reliable operation.

USD $24.10 재고 있음
XC7A35T-2FT256I - 33,280-LCell Artix-7 FPGA | AMD/Xilinx
XC7A35T-2FT256I

XC7A35T-2FT256I - 33,280-LCell Artix-7 FPGA | AMD/Xilinx

The AMD/Xilinx XC7A35T-2FT256I is an Artix-7 field-programmable gate array with 33,280 logic cells, 90 DSP slices, 1,800 Kb of block RAM, and 170 I/O in a 256-ball FTBGA package. Its -2 performance grade supports higher clock speeds than the -1 grade, while the industrial temperature designation extends operation across an extended temperature range. This FPGA combines programmable logic, DSP, block RAM, programmable I/O, and dedicated clocking resources in one device. An FPGA is a reconfigurable semiconductor whose interconnect and logic are defined by a bitstream rather than fixed circuitry. Artix-7 devices occupy the low-cost, low-power portion of the AMD/Xilinx 7-series portfolio and target compact systems requiring substantial parallel processing without the cost and power of larger high-end devices. This places the XC7A35T above a basic programmable-logic device and below larger Artix-7 members in resource capacity. The verified listing identifies 33,280 logic cells, 1,800 Kb of block RAM, 90 DSP slices, 170 I/O, and a 256-LBGA package for the closely identified XC7A35T-2FTG256I listing. Those values position the device for moderate control logic, parallel datapaths, embedded memory, video or image preprocessing, sensor fusion, and communications control. The search data does not explicitly state the target suffix's exact temperature limits, supply rails, maximum clock, or package dimensions, so those values remain marked for verification rather than being inferred. At the system level, the programmable fabric supports parallel datapaths that would require many discrete logic devices, while 90 DSP slices can accelerate multiply-accumulate operations. The 1,800 Kb block RAM provides on-chip storage for buffering, lookup tables, packet queues, and data acquisition. The 170 I/O allow interfaces to external memory, converters, transceivers, displays, and industrial peripherals, subject to the exact bank voltage, pin multiplexing, and I/O-standard constraints listed in the manufacturer documentation. The XC7A35T-2FT256I is suitable for industrial automation, test and measurement, communications infrastructure, embedded vision, and compact edge-processing systems. A board-level migration must preserve the 256-ball footprint, pin functions, supported I/O standards, power rails, configuration interface, memory interface requirements, clocking, and bitstream compatibility. Even when a distributor describes two orderable suffixes as similar, engineers should verify the exact package and temperature suffix before purchasing. A sound design starts with the AMD package pinout files and the Artix-7 documentation, followed by Vivado design constraints and timing analysis. Validate every power rail, decoupling network, configuration scheme, pin placement, and high-speed interface against the exact device suffix. Treat tool-generated timing and utilization results as design-specific measurements rather than guaranteed device specifications. This page consolidates verified source links, exposed uncertainty, pricing context, and engineering-oriented selection guidance. It adds migration and design-risk context beyond a distributor listing while avoiding unverified claims about electrical limits, lifecycle status, compliance, or package pin names.

USD $15.72 재고 있음
XC7A35T-2FTG256I - Artix-7 FPGA, 33K LC, 256-FTBGA | AMD Xilinx
XC7A35T-2FTG256I

XC7A35T-2FTG256I - Artix-7 FPGA, 33K LC, 256-FTBGA | AMD Xilinx

The AMD Xilinx XC7A35T-2FTG256I is a member of the Artix-7 family of field programmable gate arrays (FPGAs) built on a 28 nm high-k metal gate (HKMG) process technology, housed in a 256-ball fine-pitch thin BGA (FTBGA) package with -2 speed grade and industrial (-40C to +100C) temperature rating. A Field Programmable Gate Array (FPGA) is a semiconductor device whose logic functionality is defined after manufacturing through a programmable interconnect of configurable logic blocks (CLBs), block RAM, DSP slices, and programmable I/O. Within the broader programmable-logic taxonomy, an FPGA sits between fixed-function ASICs (high NRE, no flexibility) and microcontrollers (sequential execution, limited parallelism). The 7-series Xilinx FPGAs span four sub-families: Spartan-6 (cost-optimized legacy), Artix-7 (lowest power, transceiver-equipped mid-range), Kintex-7 (mid-high performance), and Virtex-7 (highest performance). Key features of the XC7A35T-2FTG256I include 33,280 logic cells distributed across approximately 5,200 6-input LUTs, 1,843,200 bits (230 KB) of block RAM organized as 50 x 36 Kb blocks, and 90 DSP48E1 slices each capable of 25 x 18-bit multiply-accumulate at up to 628 MHz. The device integrates two 10-bit ADCs (1 MSPS), four clock management tiles (CMTs) each containing one MMCM and two PLLs, and supports up to 170 user I/Os in this FTBGA-256 package. The Artix-7 architecture delivers up to 6.6 Gb/s GTP serial transceivers and a hardened memory controller block, achieving approximately 50% lower static power and 35% lower dynamic power than the prior-generation Spartan-6 at equivalent performance. The -2 speed grade positions this part as the middle performance bin (between -1 and -3) for cost-sensitive designs that still require high DSP throughput. Typical applications include high-volume motor control and digital signal processing front-ends, low-cost industrial Ethernet bridges, portable ultrasound and instrumentation front-ends, software-defined radio (SDR) baseband pre-processing, and machine-vision pre-processing pipelines. The combination of GTX transceivers, block RAM, and DSP48E1 slices makes the XC7A35T-2FTG256I well suited for parallel data-path designs with moderate serial connectivity. A key design trade-off when selecting the -2 speed grade is that the LVDS, DDR memory interface rates, and GTP transceiver line rates are constrained relative to the -3 speed grade. Designers targeting the fastest possible DDR3 or GTP line rates may need to upgrade to -3, while those optimizing for cost and still passing timing closure typically stay at -2. The industrial temperature grade extends the operating envelope beyond commercial parts, suitable for factory-floor and outdoor installations. This page aggregates distributor pricing, pin-compatible same-package alternatives, and design-oriented guidance not duplicated in the manufacturer datasheet, including thermal, signal-integrity, and pin-mux considerations for the FTBGA-256 footprint.

USD $31.17 재고 있음
XC7A50T-1CS324I - 52,160 Logic Cell Artix-7 FPGA | AMD
XC7A50T-1CS324I

XC7A50T-1CS324I - 52,160 Logic Cell Artix-7 FPGA | AMD

The AMD XC7A50T-1CS324I is an Artix-7 field-programmable gate array with 52,160 programmable logic cells, 210 programmable I/O pins and 2,764,800 RAM bits, supplied in a 324-CSPBGA package. It is built on a 28 nm FPGA process and uses a 0.95 V to 1.05 V core supply. The part is intended for industrial-temperature designs requiring programmable logic, parallel processing, serial connectivity, control, and adaptable hardware integration. An FPGA is a semiconductor whose digital function is defined by loading a configuration bitstream after fabrication. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during development, revision, or field updates. Artix-7 devices combine programmable logic, configurable I/O, block RAM, digital signal-processing resources, clocking, and memory interfaces in one integrated device. The XC7A50T-1CS324I provides 4,075 configurable logic blocks according to the supplied product data. Its 52,160 logic elements, 2,764,800 RAM bits, and 210 programmable I/O pins make it suitable for embedded control, industrial automation, communications, instrumentation, data acquisition, interface aggregation, and compact custom signal-processing systems. The CSPBGA package supports high-density PCB integration but requires careful escape routing and package-aware layout. The suffix identifies the speed grade, package, and temperature qualification of the selected orderable device. The verified manufacturer-linked data describes a 0.95 V to 1.05 V supply range and an industrial junction-temperature range of -40°C to 100°C. Designers should therefore verify the complete electrical, timing, pinout, power, and configuration requirements against the applicable AMD Artix-7 documentation before schematic capture. Typical design work involves assigning clocking and configuration pins, planning bank-specific supply rails, decoupling the package power balls, routing high-speed interfaces with controlled impedance, and validating the selected configuration bitstream on the finished board. Because FPGA designs depend on device, package, speed grade, and tool settings, a board should not be treated as interchangeable with another FPGA merely because its logic-cell count is similar. This product page consolidates verified source links and package-oriented engineering guidance, while separating unavailable pricing, pin mapping, and detailed timing data instead of estimating them. It supports sourcing and initial design planning for engineers who need an AMD Artix-7 device with 52,160 logic elements, 210 I/O pins, and a 324-CSPBGA package.

견적 요청 재고 있음
XC7A50T-1CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD
XC7A50T-1CSG324I

XC7A50T-1CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD

The AMD XC7A50T-1CSG324I is an Artix-7 Field Programmable Gate Array (FPGA) from the 7 series family, designed for cost-sensitive, high-volume applications requiring low power and high I/O density. It features 52,160 logic cells, 2,764,800 bits of total block RAM, and 210 user I/Os, all housed in a compact 15x15mm 324-pin CSPBGA package. This industrial-grade variant operates over the -40°C to +100°C temperature range. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and reconfigurable interconnects, allowing them to implement any digital logic function. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which are themselves a subset of integrated circuits. This flexibility makes FPGAs ideal for prototyping, low-to-mid volume production, and applications requiring field upgrades. Key features of the XC7A50T-1CSG324I include 52,160 logic cells, 2,764,800 bits of block RAM, 120 DSP slices, and 5 clock management tiles (CMTs) each containing a mixed-mode clock manager (MMCM) and a phase-locked loop (PLL). The device supports a wide range of I/O standards including LVCMOS, LVDS, and HSTL, and features high-speed serial transceivers for gigabit connectivity. The 28nm process technology balances performance with power efficiency. Architecturally, the Artix-7 family is built on AMD's 28nm high-performance, low-power (HPL) process. The device integrates hardened memory controllers, supporting DDR3 and DDR3L, and includes dedicated blocks for PCIe and Ethernet. The configurable logic blocks (CLBs) contain look-up tables (LUTs) and flip-flops, while the DSP48E1 slices enable high-speed arithmetic operations. The device is programmed via SRAM-based configuration, requiring an external configuration source such as a flash memory or a microprocessor. Typical applications include industrial motor control, medical imaging, software-defined radio, and video processing. The 210 user I/Os and 324-pin package make it suitable for board designs where space is at a premium. The industrial temperature grade ensures reliable operation in harsh environments. When designing with this FPGA, careful attention must be paid to power supply decoupling and configuration bitstream storage. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a configuration source. Proper PCB layout, including impedance-controlled traces for high-speed signals, is essential for reliable operation.

USD $60.20 재고 있음
XC7A50T-1FG484C - 52K Artix-7 FPGA | AMD | Industrial Control
XC7A50T-1FG484C

XC7A50T-1FG484C - 52K Artix-7 FPGA | AMD | Industrial Control

The AMD XC7A50T-1FG484C is an Artix-7 field-programmable gate array with 52,000 logic cells, 250 I/Os, and a 484-FBGA package, intended for programmable logic, control, interface, and signal-processing designs. The verified listing identifies the device as a 484-BBGA Artix-7 FPGA with 2,764,800 internal configuration bits and 52,160 logic elements. What is an FPGA? A field-programmable gate array is a programmable digital semiconductor that combines configurable logic blocks, programmable interconnect, block RAM, and digital signal processing resources. An Artix-7 FPGA sits within the FPGA hierarchy: FPGA → Artix-7 → Xilinx 7-Series FPGA → programmable logic and embedded-processing platform. Unlike a fixed-function application-specific integrated circuit, an FPGA lets engineers define parallel hardware behavior through HDL, constraints, and device configuration. The XC7A50T family is positioned for cost-sensitive systems that need more parallelism and I/O flexibility than a microcontroller or fixed interface device can provide. The verified distributor information specifically lists 250 I/Os and a 484-BBGA package, making the device relevant to industrial automation, data acquisition, communications, embedded control, and image or video processing systems. The 484-ball package supports dense board routing while providing a substantial external interface count. The -1 speed designation, temperature suffix, and exact electrical limits are not fully specified in the supplied search excerpts. Consequently, operating temperature, I/O standards, core voltage, memory resources, clock-management resources, and power consumption must be confirmed against the AMD Artix-7 data sheet before schematic sign-off. Do not infer those specifications from the distributor title alone. A practical design begins by partitioning the required datapath into parallel pipelines and selecting the smallest Artix-7 resource that satisfies timing, memory, DSP, and I/O constraints. The 250-I/O figure should be mapped against the board-level connector, transceiver, voltage-standard, and clock requirements. Pin assignment, bank voltage planning, configuration pins, decoupling, and power sequencing are more important than treating the FPGA as a generic high-pin-count component. This page consolidates verified distributor identity and package information, separates known facts from missing technical data, and avoids fabricating alternatives or electrical ratings. Engineers should use the official AMD package files and datasheet for final pinout, timing, power, and migration decisions.

USD $13.67 재고 있음
XC7A50T-1FG484I - Artix-7 FPGA, 52,160 Cells | AMD
XC7A50T-1FG484I

XC7A50T-1FG484I - Artix-7 FPGA, 52,160 Cells | AMD

AMD XC7A50T-1FG484I is an Artix-7 field-programmable gate array (FPGA) with 52,160 programmable logic cells, supplied in a 484-BBGA package. The -1 speed grade, -F package designation, and I industrial-temperature suffix identify the ordering variant, while the device provides a 1 V core-related operating point and 28 nm CMOS technology according to the supplied comparison data. The 484-BBGA package provides a high-density ball-grid interface for designs requiring extensive programmable I/O and logic integration. What is an FPGA? A field-programmable gate array is a reconfigurable digital semiconductor in the programmable-logic and FPGA category. Instead of fixing the logic at fabrication, engineers configure an FPGA after manufacture using HDL synthesis, place-and-route tools, and a device bitstream. Within the hardware hierarchy, the XC7A50T belongs to the Artix-7 FPGA family and provides a programmable-logic platform for control, signal processing, communications, and embedded-system logic. The supplied AMD-related search data identifies the device as an Artix-7 FPGA with 52,160 logic cells in a 484-BBGA package. The available comparison data also states 28 nm CMOS technology and a 1 V operating value for the target MPN. The -1 ordering code is commonly used to identify the speed grade, but the supplied data does not provide a complete timing table, I/O standards, block-resource counts, pinout, or absolute maximum ratings. Those parameters must therefore be confirmed against the manufacturer documentation before release. The 484-BBGA package is suited to compact, high-pin-count boards where a large number of package balls are required. Unlike a cross-package replacement, any proposed alternative must use the same package footprint and preserve the relevant ball assignments, voltage requirements, configuration interface, and design-tool compatibility. The supplied cross-reference results identify same-family 484-pin candidates, but they do not provide enough verified detail to establish five unqualified production drop-in replacements. Typical engineering uses include industrial automation, embedded control, sensor and signal-processing front ends, communications infrastructure, and general-purpose digital prototyping. The device should be paired with a validated power architecture, decoupling strategy, clocking plan, configuration memory or boot source, and AMD FPGA implementation flow. Because the provided evidence does not contain the complete pinout or timing specifications, PCB and firmware decisions should not be based on search-result snippets alone. For a new design, the target MPN is best suited when its documented resources, speed grade, temperature range, and package assignments match the design. For an existing PCB, compare the exact package suffix, ball map, core voltage, I/O voltage, configuration pins, memory interfaces, and required IP before considering a replacement. The official AMD Artix-7 package-pinout resources are the authoritative starting point for these checks. This page consolidates the verified search results, package identity, sourcing links, and design cautions for XC7A50T-1FG484I. It also separates documented values from missing engineering data rather than presenting inferred specifications as facts.

견적 요청 재고 있음
XC7A50T-2CS325I - Artix-7 FPGA, 324-LFBGA | AMD
XC7A50T-2CS325I

XC7A50T-2CS325I - Artix-7 FPGA, 324-LFBGA | AMD

The AMD XC7A50T-2CS325I is an Artix-7 field-programmable gate array (FPGA) in a 324-LFBGA package, with 150 I/O and the industrial -2 speed grade indicated by the ordering code. The verified distributor listing identifies the device as a programmable FPGA and provides the family-level package information, while the Artix-7 data sheet is the authoritative source for electrical, timing, configuration, and environmental details. The package designation CSG325 is used for this 324-LFBGA configuration, and the final G suffix in related AMD/Xilinx catalog listings indicates the same package family notation used by the source data. An FPGA is a programmable digital semiconductor used to implement logic, control, signal-processing, communications, and embedded-system functions in a single integrated device. Xilinx 7 Series FPGAs combine configurable logic blocks, block RAM, digital signal-processing resources, programmable I/O, clock-management resources, and dedicated configuration mechanisms. Artix-7 devices are positioned for low-cost, low-power, and small-form-factor designs, making the XC7A50T useful for industrial control, communications, instrumentation, embedded vision, and compact embedded platforms. The verified data identifies the XC7A50T family and its Artix-7 architecture but does not provide complete electrical tables, timing grades, resource counts, maximum I/O standards, power values, or package dimensions. Those parameters remain marked as needed rather than inferred. The -2 suffix, I suffix, package, and 150-I/O listing are retained exactly as supplied. Engineers should use the AMD Artix-7 data sheet and package pinout files for final timing, electrical, thermal, and land-pattern decisions. The target is suitable when a design needs a moderately capable programmable logic platform and can be implemented in the CSG325 package. Its industrial ordering suffix should be checked against the system environmental requirements. Configuration memory, programming tools, clock sources, I/O voltage domains, and decoupling must be designed around the relevant Artix-7 power architecture rather than inferred from a distributor summary. Unlike a fixed-function ASIC, an FPGA allows logic revisions, parallel interface adaptation, and field-programmable product differentiation. Unlike a microcontroller-only design, it can place multiple deterministic datapaths and control functions beside one another, provided timing closure and resource utilization are verified. This makes XC7A50T-2CS325I relevant to custom controllers, protocol bridges, test systems, and industrial equipment where firmware flexibility and hardware parallelism are both valuable. When selecting or replacing this FPGA, verify the exact package pinout, supported I/O standards, configuration mode, speed grade, temperature grade, supply requirements, and tool compatibility using AMD documentation. The -2CS325I and -2CSG325I ordering strings are related catalog spellings, but a substitution must not be approved from the package name alone. This page combines verified distributor identity, source URLs, application context, and explicit data gaps rather than presenting undocumented specifications as facts.

USD $31.97 재고 있음
XC7A50T-2CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD
XC7A50T-2CSG324I

XC7A50T-2CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD

The AMD XC7A50T-2CSG324I is a member of the Artix-7 FPGA family, built on a 28nm process technology. It features 52,160 logic cells, 2,764,800 block RAM bits, and 210 user I/O pins, all housed in a 324-ball CSG (CSPBGA) package. This device operates with a core voltage (VCCINT) of 1.0V and is specified for the industrial temperature range (-40°C to +100°C). An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementations. FPGAs sit between ASICs (application-specific) and microprocessors (software-programmable) in the design spectrum, offering hardware-level parallelism and reconfigurability. The Artix-7 family is optimized for low power and cost at 28nm, targeting applications that require high performance per watt without the expense of high-end FPGAs. Key features of the XC7A50T-2CSG324I include 120 DSP48E1 slices for signal processing, 5 clock management tiles (CMTs) with MMCM and PLL, and support for various I/O standards including LVCMOS, LVDS, and HSTL. The -2 speed grade provides a balance of performance and power, with the device supporting configuration via JTAG, SPI, or BPI interfaces. The CSG324 package offers a compact footprint with 324 balls on a 0.8mm pitch, enabling dense PCB layouts. Architecturally, the Artix-7 fabric uses a 6-input look-up table (LUT) architecture with dedicated carry chains, making it efficient for both control logic and datapath designs. The integrated block RAM can be configured in various aspect ratios, and the DSP48E1 slices support multiply-accumulate operations essential for digital signal processing. The device also includes analog-to-digital converter (XADC) functionality for on-chip temperature and voltage monitoring. Typical applications include software-defined radio, motor control, industrial networking, and medical imaging. The combination of low power, moderate logic density, and transceiver-less design makes it suitable for cost-sensitive, high-volume applications where high-speed serial links are not required. When designing with this FPGA, careful attention must be paid to power supply decoupling on VCCINT, VCCBRAM, and VCCO rails, as well as proper configuration pin termination. The device supports partial reconfiguration, enabling dynamic updates to logic functions in the field.

USD $25.45 재고 있음
XC7A50T-2CSG325I - Artix-7 FPGA 150 I/O | AMD
XC7A50T-2CSG325I

XC7A50T-2CSG325I - Artix-7 FPGA 150 I/O | AMD

The AMD XC7A50T-2CSG325I is a member of the Artix-7 FPGA family, designed for cost-sensitive, high-volume applications requiring low power and high performance at 28nm. It features 52,160 logic cells, 150 user I/Os, and 2,764,800 bits of block RAM, all housed in a 324-ball CSBGA package. This device operates from a 1V core supply and supports industrial temperature ranges, making it suitable for a wide range of embedded and communications systems. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the same chip to implement different digital logic functions. FPGAs sit between microcontrollers and ASICs in the design spectrum, offering the flexibility of software with the parallelism of hardware. They are essential in applications where rapid prototyping, hardware acceleration, or in-field updates are required. Key features of the XC7A50T-2CSG325I include 150 user I/Os, 52,160 logic cells, and 2,764,800 bits of block RAM. The device also integrates an XADC block with an on-chip reference circuit (±1%), enabling on-chip monitoring of temperature and power supply rails without external active components. The -2 speed grade provides a balanced performance point for logic and I/O, while the industrial temperature grade (-I) ensures operation from -40°C to +100°C. Technically, the Artix-7 family is built on a 28nm high-k metal gate (HKMG) process, delivering the lowest power and cost at this node. The device supports various I/O standards, including LVCMOS, LVDS, and HSTL, and includes clock management tiles (CMTs) with MMCM and PLL blocks for robust clock generation. The XADC provides a 12-bit, 1 MSPS analog-to-digital converter, useful for system monitoring and control. Typical applications include motor control, industrial networking, software-defined radio, and video processing. The 150 I/Os and 324-ball package make it ideal for mid-density designs where board space is limited. The low power consumption of the Artix-7 family is particularly beneficial in battery-powered or thermally constrained systems. When designing with this device, ensure proper decoupling of the 1V core supply and follow AMD's power-on sequencing guidelines. The configuration bitstream can be stored in external SPI flash or loaded via JTAG, providing flexibility in system design.

USD $28.40 재고 있음
XC7A50T-2FG484I - 52,160-L Logic Artix-7 FPGA | AMD
XC7A50T-2FG484I

XC7A50T-2FG484I - 52,160-L Logic Artix-7 FPGA | AMD

The AMD XC7A50T-2FG484I is an Artix-7 field-programmable gate array (FPGA) with 52,160 logic elements, 250 I/O, and a 484-pin FBGA package. The supplied distributor data identifies the device as a 28 nm CMOS FPGA with a 1 V supply and 2,764,800 logic cells in the associated listing field; the exact interpretation of that field should be confirmed against the manufacturer datasheet. A field-programmable gate array is a programmable-logic semiconductor: configurable logic blocks, digital signal processing resources, block RAM, and programmable I/O are combined on one integrated circuit. An FPGA sits within the broader semiconductor and programmable-logic hierarchy, allowing parallel hardware functions to be implemented and revised without changing the PCB. This makes the Artix-7 family suitable for control, signal processing, communications, and embedded systems where parallel throughput and reconfigurability matter. The XC7A50T-2FG484I combines 52,160 logic elements with 2.64 Mbit embedded memory in the supplied comparison data. Its 484-pin FBGA package provides extensive board connectivity for high-speed interfaces and external memory. The “-2” speed designation and “I” temperature suffix are family ordering codes, but the verified excerpt does not provide complete timing, temperature, or power values; those parameters should be checked in the AMD datasheet before design release. The device is appropriate for industrial automation, robotics, embedded control, communications, instrumentation, and signal-processing designs. Its large I/O count is useful when a design combines multiple parallel buses, high-speed transceivers, DDR memory, clocks, and management signals. Compared with smaller FPGAs, the XC7A50T provides more parallel resources, but its 484-BBGA package requires careful PCB escape routing, thermal planning, and manufacturing control. A key design consideration is package complexity: the dense FBGA footprint demands via-in-pad or via-under-bump considerations, precise ball assignment, and validated manufacturing rules. Power, decoupling, clocking, configuration, and high-speed signal-integrity requirements also depend on the selected board stack-up and the exact I/O standards enabled. This page consolidates verified distributor specifications, package information, source links, and engineering-oriented selection guidance. It distinguishes confirmed values from parameters that require the manufacturer datasheet, avoiding invented electrical or lifecycle claims.

USD $150.00 재고 있음
XC7A50T-2FGG484I - Artix-7 FPGA, 250 I/O | AMD
XC7A50T-2FGG484I

XC7A50T-2FGG484I - Artix-7 FPGA, 250 I/O | AMD

The AMD XC7A50T-2FGG484I is an Artix-7 Field Programmable Gate Array (FPGA) from the cost-optimized 28nm family, offering 52,160 logic cells, 250 user I/Os, and 2,764,800 bits of block RAM in a 484-ball FBGA (FGG484) package. It operates from a 0.95V to 1.05V core supply and supports industrial temperature range (-40°C to +100°C). An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. FPGAs sit within the broader category of programmable logic devices (PLDs), which are themselves a subset of application-specific integrated circuits (ASICs) but with the key advantage of reconfigurability. The Artix-7 family is positioned as the low-cost, high-performance-per-watt tier within the Xilinx 7-series, balancing logic density, DSP capability, and transceiver performance for cost-sensitive applications. Key features include 150 DSP48E1 slices for high-speed signal processing, 5 clock management tiles (CMTs) with MMCM and PLL, and support for multiple I/O standards including LVCMOS, LVDS, and HSTL. The device integrates analog mixed-signal (AMS) blocks for on-chip voltage and temperature monitoring. The FGG484 package provides a 23x23mm footprint with 1.0mm ball pitch, enabling moderate-density PCB designs without requiring advanced manufacturing processes. Architecturally, the Artix-7 fabric is built on a 28nm high-k metal gate (HKMG) process, delivering up to 2.9 Tb/s of aggregate I/O bandwidth. The configurable logic blocks (CLBs) contain 8 6-input LUTs and 16 flip-flops each, providing flexible logic implementation. The block RAM is organized as 36Kb dual-port blocks that can be cascaded or split into two independent 18Kb blocks, supporting various memory configurations. Typical applications include motor control, industrial networking, software-defined radio, medical imaging, and low-cost video processing. The 250 I/Os and 150 DSP slices make it well-suited for real-time signal processing and interface bridging. The industrial temperature grade ensures reliable operation in harsh environments. When designing with this device, ensure adequate decoupling on all power rails (VCCINT, VCCAUX, VCCO) and follow AMD's power-on sequencing requirements. The configuration bitstream can be stored in external SPI flash or loaded via JTAG, with support for multi-boot and fallback configurations.

USD $27.50 재고 있음
XC7A50T-2FT256I - 52,160 Logic Cell Artix-7 FPGA | AMD
XC7A50T-2FT256I

XC7A50T-2FT256I - 52,160 Logic Cell Artix-7 FPGA | AMD

The AMD Xilinx XC7A50T-2FT256I is an Artix-7 field-programmable gate array (FPGA) with 52,160 logic elements, 170 user I/O, and 2,764,800 total RAM bits in a 256-FTBGA package. It is designed for cost-sensitive, high-volume embedded systems requiring programmable logic, parallel interfaces, control, and signal processing. The verified distributor listing identifies it as a 256-LBGA FPGA, while the package nomenclature uses 256-FTBGA. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and input/output resources. Unlike a fixed-function application-specific integrated circuit, an FPGA permits logic changes through a programmable configuration while retaining the same board-level package and pin assignment. The Artix-7 family positions the XC7A50T between larger programmable-logic devices and lower-capacity FPGA options. The XC7A50T-2FT256I provides 52,160 logic elements, 4,075 logic array blocks according to the verified product description, 2,764,800 RAM bits, and 170 user I/O. These resources support control logic, data acquisition, protocol bridging, industrial automation, embedded vision, communications, and general-purpose accelerator designs. The exact speed grade, temperature grade, and complete timing specifications are identified by the part-number suffix and must be checked against the AMD Artix-7 datasheet. The 256-FTBGA package is a surface-mount ball-grid-array package intended for multilayer PCB designs. Because the device has many power, ground, configuration, and user-I/O balls, board layout, decoupling, thermal management, and high-speed routing are critical. AMD also provides package pinout files in TXT and CSV formats, with the format described by UG475. Typical implementations use XC7A50T-2FT256I in industrial controllers, camera and image-processing front ends, communication gateways, sensor fusion, test equipment, and embedded compute systems. Designers should use the package pinout file and device-specific constraints to validate every ball assignment, power rail, configuration interface, and I/O standard before fabrication. This page consolidates verified distributor references, package information, design constraints, and practical procurement guidance. It does not invent timing, electrical, lifecycle, or compliance values that were not present in the supplied data.

견적 요청 재고 있음