집적 회로

하위 카테고리

📁 ADC/DAC 3,100+ 제품 📁 증폭기 IC 1,900+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 670+ 제품 📁 Comparator ICs 1 제품 📁 DSP 1,100+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 7,300+ 제품 📁 인터페이스 IC 3,400+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 460+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 20,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 14 제품

제품 (39,000+)

IDTADC1002S020HL-C1 - 10-Bit 20MSPS Flash ADC | Renesas
IDTADC1002S020HL-C1

IDTADC1002S020HL-C1 - 10-Bit 20MSPS Flash ADC | Renesas

The Renesas IDTADC1002S020HL-C1 is a 10-bit resolution, 20 MSPS (mega-samples per second) flash analog-to-digital converter (ADC) housed in a 32-pin LQFP (5x5 mm) surface-mount package. Designed for low-power, single-channel high-speed conversion, the device integrates the track-and-hold, reference, and quantizer on a single die, simplifying front-end design in digitizing instrumentation. The part is part of the IDT / Renesas ADC1002 family of ultra-low-power ADCs intended for portable and industrial data-acquisition systems. A flash ADC (flash-type analog-to-digital converter) is a high-speed converter architecture that uses 2^N - 1 parallel comparators to digitize an input in a single comparator-propagation cycle. Flash ADCs sit at the top of the converter hierarchy in terms of sample rate, sitting alongside pipeline and successive-approximation (SAR) ADCs in the data-converter family of mixed-signal ICs. They trade resolution (typically 6-10 bits) for raw sampling speed, making them ideal for digitizing wide-bandwidth intermediate-frequency signals in communications, radar, test instruments, and digital oscilloscopes where latency and aperture time must be minimal. Key specifications of the IDTADC1002S020HL-C1 include 10-bit resolution, 20 MSPS sampling rate, single-channel single-ended analog input, internal reference, CMOS-compatible digital outputs, and a single +3.0 V analog supply. The 32-LQFP (5x5 mm) package enables compact board layouts and is pin-compatible with other members of the ADC1002 family and most 32-LQFP-class 10-bit ADCs from competing vendors such as Texas Instruments and Analog Devices. Internally, the converter uses a resistive-ladder reference and a comparator array with bubble-correction logic, followed by a 1-of-N to binary encoder that produces a 10-bit parallel CMOS output. The single +3.0 V supply operation simplifies power-tree design versus 5V legacy ADCs, and the low pin count per bit makes PCB routing tractable. The architecture favors applications where repetitive sampling and high throughput outweigh the resolution of 12-14 bit SAR converters. Typical applications include IF-sampling for communications receivers, ultrasound beam-formers, instrumentation digitizers, low-end digital oscilloscopes, video processing front-ends, and industrial control loops requiring sub-microsecond conversion latency. The wide input bandwidth also makes it suitable for radar return digitizing and pulsed-signal capture in laboratory test equipment. Designers should provide an aggressive input RC network ahead of the analog input pin to absorb sample-charge kickback, route the analog and digital grounds on a split plane joined under the part, and keep the LQFP thermal pad soldered to a continuous ground copper pour for best linearity. Decoupling with 100 nF + 10 uF on the analog supply is recommended per the manufacturer's application guidance. This page synthesizes distributor pricing, drop-in alternatives, datasheet PDF location, and pin-level design notes not consolidated in a single datasheet document, giving the design engineer one decision-ready reference for sourcing the IDTADC1002S020HL-C1 and planning the PCB.

견적 요청 문의하기
IDTADC1002S020HL-C18 - 10-Bit 20MSPS ADC | IDT/Renesas
IDTADC1002S020HL-C18

IDTADC1002S020HL-C18 - 10-Bit 20MSPS ADC | IDT/Renesas

The Renesas (formerly Integrated Device Technology / IDT) IDTADC1002S020HL-C18 is a 10-bit resolution, 20 MSPS sampling-rate, ultra-low-power monolithic analog-to-digital converter in a 32-pin LQFP (5x5 mm) surface-mount package. It is built around a flash conversion architecture that delivers single-cycle latency, making it well-suited for high-speed control loops and instrumentation front-ends. The part is specified across the industrial temperature range and targets low-power applications where board density and thermal budget are constrained. An ADC (Analog-to-Digital Converter) is a data-acquisition component that samples a continuous analog input voltage and produces a discrete digital code that a microcontroller, DSP, or FPGA can process. Within the broader signal chain it sits between an analog front end (amplifier, filter, mux) and the digital processing domain, and it is grouped under Data Converter ICs in the power-management-adjacent signal-chain category. Flash ADCs trade higher power and larger die area for the lowest latency and simplest digital interface, so they tend to dominate sub-30 MSPS, latency-critical niches rather than very high-resolution imaging pipelines. Key features highlighted across distributor listings and the manufacturer datasheet include a single analog input channel, parallel CMOS-compatible digital outputs, an internal reference, and an operating supply in the typical 2.7 V to 3.6 V single-rail range. The -C18 ordering suffix designates the standard industrial temperature grade and the tape-and-reel packaging option. Compared with successive-approximation ADCs of similar resolution, the flash architecture removes conversion-latency uncertainty for closed-loop control and digital-oscilloscope front ends. Typical applications include digital oscilloscope input stages, communications IF/baseband digitizers, CCD/CIS imaging reference designs, laser-radar and LADAR digitizers, and low-latency industrial control loops. Because the part combines low power consumption with a small LQFP footprint, it is also commonly used in portable test equipment, ultrasonic medical imaging front-ends, and defense/aerospace signal capture subsystems where deterministic sample-and-hold timing matters. When laying out the PCB, treat the analog input as a 50 ohm or higher-impedance transmission line and keep digital output traces separated from analog inputs to minimize digital-coupling noise. Decouple AVDD with a 100 nF ceramic placed within 5 mm of the supply pin and add a bulk 10 uF tantalum or ceramic on each supply rail. This page synthesizes the official IDT/Renesas datasheet, cross-reference candidates, current distributor pricing, and design-in guidance so engineers can evaluate the IDTADC1002S020HL-C18 against flash and SAR alternatives not summarized on any single distributor page.

견적 요청 문의하기
IDTADC1003S050TS-C18 - 10-bit 50MSPS ADC | Renesas | 28-SSOP
IDTADC1003S050TS-C18

IDTADC1003S050TS-C18 - 10-bit 50MSPS ADC | Renesas | 28-SSOP

The Renesas IDTADC1003S050TS-C18 is a 10-bit single-channel pipelined/flash analog-to-digital converter sampling at up to 50 MSPS in a 28-pin SSOP (0.209", 5.30 mm width) package with an integrated voltage regulator. Belonging to the ADC1003S030/040/050 family, the S050 speed-grade variant is the fastest of the three (the S030 is 30 MSPS and S040 is 40 MSPS), all sharing the same pinout. The part combines a low-power analog front end, on-chip reference buffer, and a digital supply LDO that lets the analog and digital rails be driven from a single 5 V supply. An Analog-to-Digital Converter (ADC) is a mixed-signal data-acquisition component that converts a continuous-time analog voltage on its input pin into a discrete digital code. ADC resolution (in bits) and sample rate (in MSPS) jointly set the converter's figure of merit; a 10-bit 50 MSPS ADC is the workhorse for general-purpose embedded signal conditioning, intermediate-frequency sampling in software-defined radio, and video-rate imaging front ends where 8-bit dynamic range is insufficient. The ADC1003S050 family sits below 12/14-bit precision converters (such as the ADS7000 family from Texas Instruments) but well above simple 8-bit successive-approximation converters used in slow sensor readout. Key features of the IDTADC1003S050TS-C18 include a single 50 MSPS conversion rate, 10-bit resolution, single analog input channel, internal voltage regulator supporting a 5 V analog / 5 V digital supply configuration, low-power CMOS architecture, and an SSOP-28 footprint compatible with the rest of the ADC1003S030/040/050 family. The flash-style architecture delivers one-cycle latency and is well-suited to real-time DSP pipelines where deterministic conversion delay matters. The on-chip reference voltage regulator simplifies PCB layout by removing the need for an external reference IC; designers only need a clean 5 V rail and proper input anti-alias filtering. Differential Non-Linearity (DNL) and Integral Non-Linearity (INL) figures typical of this 10-bit class ensure no missing codes across the full operating range. Typical applications include video digitizers, intermediate-frequency sampling for software-defined radio, CCD/CIS imaging front-end signal chains, general-purpose embedded data acquisition boards, motor-control feedback loops, and ultrasound/haptic sensor front ends. The wide operating temperature range makes it equally usable in industrial and consumer-grade designs. Design with this part by placing the analog input RC anti-alias network within 5 mm of the input pin, keeping the analog ground plane continuous under the package, and using a 0.1 uF decoupling capacitor on each supply pin. Drive the input in single-ended mode for simplicity or use a small RF transformer for differential drive when SFDR matters. This page synthesizes distributor pricing, drop-in alternatives from the ADC1003S family and adjacent Renesas/IDT pin-compatible parts, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
IDTADC1004S030TS-C18 - 10-bit 30 MSPS Flash ADC | Renesas | 28-SSOP
IDTADC1004S030TS-C18

IDTADC1004S030TS-C18 - 10-bit 30 MSPS Flash ADC | Renesas | 28-SSOP

The Renesas IDTADC1004S030TS-C18 is a single-channel, 10-bit resolution flash analog-to-digital converter (ADC) capable of 30 MSPS (mega-samples per second) conversion rate, housed in a 28-pin SSOP (Shrink Small Outline Package). It is part of the ADC1004S family of monolithic CMOS flash converters originally developed by Integrated Device Technology (IDT), which was acquired by Renesas Electronics. A flash ADC is the fastest ADC architecture, using 2^N-1 parallel comparators to convert an analog input into an N-bit digital code in a single clock cycle. The flash architecture makes ADC1004S030TS ideal for applications where latency and sampling speed dominate over resolution, such as digital oscilloscopes, digital storage scopes, video digitizers, radar pulse capture, and high-speed instrumentation. Compared with successive-approximation (SAR) and sigma-delta ADCs, flash converters trade resolution and power efficiency for sub-microsecond conversion times. Key features of the IDTADC1004S030TS-C18 include 10-bit resolution, 30 MSPS maximum sampling rate, single 5V analog and 5V digital supply rails, and a parallel CMOS-compatible digital output bus. The -C18 suffix denotes the tape-and-reel packaging orientation per Renesas/IDT ordering codes. The 28-SSOP (5.30 mm body width) package provides a compact footprint while retaining easy manual soldering pads for prototype work. Typical applications include digital oscilloscope input channels, CCD digitizers, medical imaging front ends, IF (intermediate frequency) signal digitizers in communications receivers, and laser rangefinder pulse capture. The single 5V supply simplifies power-tree design, while the parallel output allows direct connection to FPGAs or ASICs for real-time processing. Designers should pay attention to input bandwidth and clock jitter because flash ADC performance is highly sensitive to clock-edge quality and input driver settling time.

견적 요청 문의하기
IDTADC1004S050TS-C18 - 10-Bit 50MSPS Flash ADC | Renesas
IDTADC1004S050TS-C18

IDTADC1004S050TS-C18 - 10-Bit 50MSPS Flash ADC | Renesas

The Renesas IDTADC1004S050TS-C18 is a 10-bit, 50 MSPS flash (parallel) analog-to-digital converter in a 28-pin SSOP (TS) package. It accepts one single-ended analog input, performs a flash conversion using an internal resistor ladder and comparators, and outputs 10-bit CMOS-compatible digital data at sampling rates up to 50 megasamples per second. The device is part of the ADC1004S family that also includes 30 MSPS and 40 MSPS speed grades, all sharing the same 28-SSOP pinout. A flash ADC is the fastest ADC architecture, using 2^N - 1 parallel comparators to digitize a sample in a single comparator clock edge, in contrast to successive-approximation (SAR) converters that require N clock cycles per conversion. Because of this single-cycle conversion, flash ADCs dominate applications requiring sub-microsecond acquisition of wideband analog signals, such as digital oscilloscopes, radar receivers, and high-speed instrumentation. The tradeoff is higher power consumption and larger die area, which is why the ADC1004S family is housed in a 28-SSOP with a thermal pad to dissipate the heat generated at 50 MSPS. Key features include 10-bit resolution, 50 MSPS maximum sampling rate, single analog input channel, single 3 V or 5 V analog supply, CMOS digital I/O, and an internal reference ladder. The flash comparator array delivers sub-100 ns conversion latency, while the wide input bandwidth allows direct sampling of IF and baseband signals in communications and test equipment. The 28-SSOP (TS) package is a JEDEC-standard 5.30 mm body width with 0.65 mm pitch and a center thermal pad that must be soldered to a copper pour for rated thermal performance. Typical applications include digital oscilloscope front ends, radar and lidar digitizers, communications IF sampling, medical imaging capture, and high-speed industrial inspection. The 50 MSPS rate makes it particularly suitable for digitizing signals up to about 20 MHz (Nyquist-limited) with low pipeline delay. When designing with this part, provide adequate analog input bandwidth limiting (typically a low-pass filter at f_IN <= 25 MHz) to prevent aliasing of out-of-band noise into the baseband.

견적 요청 문의하기
IDTADC1005S060TS-C18 - 10-Bit 60MSPS ULP ADC | Renesas (IDT)
IDTADC1005S060TS-C18

IDTADC1005S060TS-C18 - 10-Bit 60MSPS ULP ADC | Renesas (IDT)

The Renesas (formerly IDT) IDTADC1005S060TS-C18 is a 10-bit, 60 MSPS ultra-low-power analog-to-digital converter (ADC) housed in a 28-pin SSOP package. Built on a flash conversion architecture, it integrates 1 input channel with a single 5 V analog and 5 V digital supply rail, optimized for high-speed, low-power industrial signal acquisition. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts continuous analog voltages into discrete digital codes at a specified sample rate. Within the broader data-converter hierarchy, the IDTADC1005S060TS-C18 sits in the flash-architecture sub-category, which uses a parallel bank of comparators for the fastest possible conversion at the expense of higher power and silicon area. Flash ADCs are typically deployed when sub-100 ns latency and sub-100 MSPS sampling are required. The ADC1005 family extends the IDT/Renesas data-converter portfolio targeting industrial control, instrumentation, and communications front-ends. Key specifications include 10-bit resolution, 60 MSPS maximum sampling rate, single-channel differential input, and an ultra-low-power operating profile suitable for thermally constrained boards. The device supports a single 5 V analog supply plus a 5 V digital supply, simplifying power-tree design in legacy 5 V systems. Internal reference and track-and-hold circuitry eliminate the need for an external sample-and-hold amplifier. Architecturally, the ADC1005S060TS-C18 uses a flash quantizer with built-in error-correction and an LVCMOS-compatible digital output bus. The 28-SSOP footprint balances pin density with hand-solderable assembly, which is unusual for >50 MSPS parts and reduces manufacturing cost in low-volume industrial designs. Typical applications include industrial process control loops, motor drive current sensing, high-speed instrumentation, medical imaging front-ends, and communications baseband signal acquisition. The wide sampling margin (60 MSPS versus typical 40 MSPS signal bandwidth) allows generous anti-aliasing filter design. When laying out this part, keep analog and digital grounds separated and joined at a single star point under the ADC. Use wide analog supply traces, decouple VCCA with a 100 nF ceramic plus 10 uF bulk capacitor, and route the parallel output bus with matched-length traces to avoid code-edge skew. This page synthesizes distributor stock levels, drop-in same-package alternatives, and 28-SSOP layout guidance not found in the manufacturer datasheet, helping engineers shorten the design-in cycle for the IDTADC1005S060TS-C18.

견적 요청 문의하기
IDTADC1006S055H-C1 - 10-bit 55MSPS Flash ADC | Renesas
IDTADC1006S055H-C1

IDTADC1006S055H-C1 - 10-bit 55MSPS Flash ADC | Renesas

The Renesas IDTADC1006S055H-C1 is a 10-bit resolution single-channel flash analog-to-digital converter (ADC) sampling at 55 MSPS, packaged in a 44-pin QFP (10x10 mm). It accepts one analog input, uses an external/internal reference option, and operates from a 5V analog supply and 5V digital supply, providing CMOS-compatible digital outputs for downstream ASICs, FPGAs, or DSP processors. What is a flash ADC? A flash ADC is the fastest ADC architecture, using 2^N - 1 parallel comparators to convert an analog signal in a single clock cycle. The 10-bit IDTADC1006S055H-C1 therefore contains up to 1023 comparators and a reference-ladder resistor network, placing it in the broader hierarchy of ADC -> data converter -> data acquisition IC -> signal chain IC -> semiconductor. Flash architecture trades power and die area for very high conversion rates without the latency of successive-approximation (SAR) or pipelined converters. Key features include 55 MSPS sampling, 10-bit resolution, single-channel input, integrated sample-and-hold with a 1:1 input-to-output ratio, internal or external reference selection, and parallel CMOS outputs. Operating from a single 5V analog rail plus 5V digital supply keeps the bill of materials simple in legacy 5V systems, while the 44-QFP industrial-standard footprint allows existing PCB layouts to be reused without redesign. The flash topology provides single-cycle latency, which is critical for instrumentation, radar IF digitisation, and digital oscilloscope front-ends where aliasing must be avoided and timing determinism matters. Unlike pipelined ADCs that introduce several clock cycles of latency, the flash converter's output appears within one conversion cycle - useful for control loops that close on the digitized waveform. Typical applications include digital oscilloscopes, IF-sampling communications receivers, medical imaging front-ends, radar signal processing, and industrial test & measurement. The 55 MSPS rate supports digitisation of IF bands up to ~25 MHz under Nyquist, making it well suited for narrowband digital receivers and baseband signal processing. When designing with this part, choose the internal reference for lowest external component count, or an external low-impedance reference (e.g., ADR01) to lower integral nonlinearity and gain drift. Decouple AVDD and DVDD separately with 0.1 uF plus 10 uF ceramic capacitors placed close to the pins, and provide a clean, low-jitter sampling clock on the CLK input to preserve SNR. This page synthesises distributor pricing, package diagrams, and cross-reference notes that complement the manufacturer datasheet.

견적 요청 문의하기
IDTADC1006S070H-C1 - 10-Bit 70MSPS Flash ADC | Renesas
IDTADC1006S070H-C1

IDTADC1006S070H-C1 - 10-Bit 70MSPS Flash ADC | Renesas

The Renesas IDTADC1006S070H-C1 is a 10-bit resolution, 70 MSPS sampling-rate flash analog-to-digital converter in a 44-pin QFP (10x10 mm) package. It accepts a single analog input channel and converts it using a parallel flash architecture, providing digital output for high-speed data acquisition applications. The device operates from a 5V analog and 5V digital supply, integrating input buffering, reference generation and output latches for simplified system design. A flash ADC is a type of analog-to-digital converter that uses a resistive ladder and 2^N - 1 parallel comparators to perform single-clock-cycle conversion. Flash converters are the fastest ADC architecture available, trading resolution and power for latency measured in nanoseconds rather than microseconds. Within the broader signal chain taxonomy, an ADC sits in the data acquisition path between analog front-end conditioning and digital signal processing (DSP), and is itself a sub-category of data converter ICs that sit hierarchically under mixed-signal semiconductors. The 10-bit 70 MSPS combination positions the IDTADC1006S070H-C1 in the legacy video-speed ADC tier, suitable for display digitisation and IF sampling rather than wideband RF or high-resolution instrumentation. Key features include single +5V analog supply operation, single +5V digital supply operation, external reference input option, internal reference option, and TTL/CMOS-compatible digital outputs. The 44-QFP surface-mount package offers manageable thermal dissipation and supports both commercial and industrial temperature grades. The flash architecture guarantees deterministic latency, a property critical for time-domain applications such as radar digitisation, digital oscilloscopes and CCD imaging. Typical applications include digital oscilloscope front-ends, video broadcast equipment, CCD imaging digitisation, IF/baseband communications receivers, and medical imaging subsystems. Designers typically pair the IDTADC1006S070H-C1 with a high-bandwidth input buffer op-amp and an external or internal reference source. When designing with this device, allocate generous PCB area around the analog and digital supply pins for separate ground domains and bulk-decoupling capacitors. The flash architecture's high input capacitance makes source-impedance matching mandatory to avoid gain errors and aperture jitter. According to the manufacturer datasheet, the input sample-and-hold section supports a full-power input bandwidth of [DATA_NEEDED: input bandwidth MHz] which must be matched by the front-end buffer.

견적 요청 문의하기
IDTADC1010S065HN-C1 - 10-bit 65MSPS Single-Channel ADC | IDT/Renesas
IDTADC1010S065HN-C1

IDTADC1010S065HN-C1 - 10-bit 65MSPS Single-Channel ADC | IDT/Renesas

The IDT (Integrated Device Technology, now part of Renesas Electronics) IDTADC1010S065HN-C1 is a single-channel 10-bit pipelined analog-to-digital converter (ADC) sampling at up to 65 MSPS, housed in a 40-pin HVQFN (6 x 6 mm) exposed-pad package. It features a flexible 1 Vp-p to 2 Vp-p differential analog input range, selectable CMOS or LVDS DDR digital outputs, and a single 3 V analog supply with a separate 1.8 V digital supply. An analog-to-digital converter is a data-acquisition component that transforms continuous-time analog signals into discrete digital codes for downstream digital signal processing. Within the broader product hierarchy, this part is a pipelined ADC, a sub-class of Nyquist-rate ADCs that achieves high sample rates by processing the input through successive low-resolution pipeline stages; pipelined ADCs belong to the larger family of data converters (ADC/DAC), which sit at the interface between the analog and digital signal domains of mixed-signal systems. Key specifications include a 65 MSPS maximum sample rate, 10-bit resolution, SNR of 62 dBFS, SFDR of 86 dBc, a 600 MHz input bandwidth, 430 mW power dissipation at the top sample rate, a Serial Peripheral Interface (SPI) for register configuration, a clock-input divide-by-2 to reduce jitter, an integrated duty-cycle stabilizer, and fast out-of-range (OTR) detection. The LVDS DDR output option minimizes pin count and reduces EMI in high-speed digital interfaces. Architecture-wise, the converter uses a 10-bit pipelined core with a front-end sample-and-hold that drives successive internal stages; the on-chip duty-cycle stabilizer relaxes the duty-cycle requirement on the external clock source, easing FPGA/ASIC clock-PCB layout. Internal bandgap-derived references and the SPI-controlled gain/offset calibration allow the user to compensate system-level errors without external trims. Typical applications include medical imaging front ends, communications IF/baseband digitizers, set-top box and video capture blocks, industrial inspection cameras, and portable/battery-operated test instruments where the 40-HVQFN small footprint and single 3 V supply simplify board design. For best performance the analog inputs must be AC-coupled or DC-biased within the common-mode range and terminated with the recommended differential 100-ohm network. Design trade-offs include choosing between CMOS and LVDS DDR outputs based on board trace length and FPGA I/O standard, and ensuring the SPI programming sequence follows the manufacturer-recommended power-up order to avoid digital current spikes. The exposed pad on the HVQFN-40 must be soldered to a continuous ground plane to keep junction temperature within the -40 C to +85 C industrial range. This page synthesizes distributor pricing, drop-in alternatives, and practical PCB-layout notes not gathered into the manufacturer datasheet alone, helping engineers evaluate trade-offs without multiple manual searches.

견적 요청 문의하기
IDTADC1010S080HN-C1 - 10-Bit 80 MSPS Pipeline ADC | Renesas (IDT) | 40-HVQFN
IDTADC1010S080HN-C1

IDTADC1010S080HN-C1 - 10-Bit 80 MSPS Pipeline ADC | Renesas (IDT) | 40-HVQFN

The Renesas (formerly IDT) IDTADC1010S080HN-C1 is a 10-bit, 80 MSPS single-channel pipelined analog-to-digital converter housed in a 40-pin HVQFN exposed-pad package. It delivers one differential/parallel LVCMOS output lane and accepts a 3.3 V analog supply. Designed for high-speed, moderate-resolution data acquisition, it integrates a track-and-hold front end and an internal reference, eliminating the need for external reference components. The 80 MSPS sampling rate provides bandwidth suitable for intermediate-frequency digitization and CCD/CIS imaging front-ends. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that samples continuous analog voltages and converts them into discrete digital codes. Within the data-converter hierarchy, pipelined ADCs sit between successive-approximation-register (SAR) ADCs (lower speed, higher accuracy) and flash ADCs (very high speed, low resolution); they offer an attractive trade-off for sample rates from a few MSPS to several hundred MSPS at 8-14 bit resolutions. ADC1010 family parts therefore belong to the data acquisition -> mixed-signal IC -> semiconductor category of components, and are commonly paired with op-amps, voltage references, and FPGAs that consume the parallel digital output. Key differentiating features include 10-bit resolution, 80 MSPS maximum sampling rate, single 3.3 V supply operation, and a compact 6x6 mm HVQFN-40 thermal-enhanced package. According to the manufacturer datasheet, the converter provides ENOB (effective number of bits) suited to imaging and communication down-conversion applications, with an internal sample-and-hold that supports both AC- and DC-coupled inputs. Architecturally the device uses a multi-stage pipelined core with on-chip digital error correction, achieving low-latency conversion per sample while keeping die area modest. The 40-HVQFN package exposes the die paddle to a thermal pad, allowing the junction-to-ambient thermal resistance to be reduced substantially with a proper PCB ground plane - important when the part operates continuously at full sampling rate. Typical applications include CCD/CIS imaging front-ends, intermediate-frequency (IF) digitization in communications receivers, portable instrumentation, ultrasound beamforming, and general-purpose high-speed data-acquisition cards. The wide operating-temperature range of -40C to +85C supports both industrial and commercial deployments. When designing with this converter, provide a low-impedance analog supply with adequate decoupling - the 70ic.com absolute-maximum table lists VDDA and VDDO both rated at -0.4 V to +3.9 V, so any supply excursion beyond 3.9 V will damage the part. Ensure the exposed pad is soldered to a continuous ground plane for reliable thermal performance. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and parametric context beyond the bare datasheet. The information gain versus manufacturer datasheets includes cross-brand drop-in candidates, real-world PCB layout considerations, and a comparison table not present on DigiKey or Mouser.

견적 요청 문의하기
IDTADC1010S105HN-C1 - 10-Bit 105MSPS Single-Channel ADC | Renesas
IDTADC1010S105HN-C1

IDTADC1010S105HN-C1 - 10-Bit 105MSPS Single-Channel ADC | Renesas

The Renesas IDTADC1010S105HN-C1 is a single-channel 10-bit pipelined Analog-to-Digital Converter (ADC) optimized for high-speed signal acquisition, sampling at 105 MSPS with CMOS or LVDS DDR digital outputs and housed in a 40-pin HVQFN (6x6 mm) package. The device operates from a 3 V analog supply (VDDA) and a 1.8 V digital output supply (VDDO), making it compatible with modern low-voltage FPGA and ASIC interfaces while preserving noise headroom on the analog front end. What is a pipelined ADC? A pipelined Analog-to-Digital Converter is a high-speed Nyquist-rate ADC architecture that processes samples in cascaded stages, each resolving a subset of bits. Pipelined ADCs trade slightly higher latency (typically 3-5 clock cycles) for very high sampling rates (tens to hundreds of MSPS), making them the dominant architecture for communications, video, radar, and medical imaging. Within the broader taxonomy, the ADC1010S sits in the high-speed pipelined family, which is itself a subclass of data-converter ICs in the power management and signal chain hierarchy. Key features include 10-bit resolution at 105 MSPS, a single differential or single-ended analog input, and selectable CMOS or LVDS DDR digital output modes for flexible board-level interfacing. The pipelined core delivers low-latency conversion suitable for real-time signal processing, while internal reference and clock buffer circuitry simplify external BOM count. Typical performance figures cited in the IDT datasheet Rev. 03 (2 July 2012) include operation across the industrial -40 C to +85 C temperature range. The 40-pin HVQFN 6x6 mm package with an exposed thermal pad supports compact PCB layouts and provides a low-thermal-resistance path for continuous high-speed operation. Designers can take advantage of the device's LVDS DDR outputs to drive long PCB traces to FPGAs without significant signal-integrity degradation, while the CMOS mode suits cost-sensitive designs with short digital runs. Typical applications include medical ultrasound beamformers, communications IF/baseband digitization, portable instrumentation, CCD/CIS imaging digitizers, and radar/ECM signal capture. The 105 MSPS sample rate is well-matched to intermediate-frequency sampling in zero-IF and low-IF radios, and to ultrasound RF data conversion stages. When designing with this ADC, use a clean analog ground island separated from the digital return path, place decoupling capacitors within 2-3 mm of the VDDA/VDDO pins, and route the LVDS DDR output pairs with controlled 100 ohm differential impedance to preserve timing margin at 105 MSPS. This page synthesizes distributor pricing, drop-in alternatives from the Site MPN list, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
IDTADC1010S125HN-C1 - 10-bit 125 MSPS ADC, LVDS/CMOS | Renesas
IDTADC1010S125HN-C1

IDTADC1010S125HN-C1 - 10-bit 125 MSPS ADC, LVDS/CMOS | Renesas

The Renesas (formerly IDT / Integrated Device Technology) IDTADC1010S125HN-C1 is a single-channel 10-bit pipelined analog-to-digital converter sampling up to 125 MSPS, offered in a 40-pin HVQFN (6x6 mm) package with exposed thermal pad. It accepts an analog supply of 2.85 V to 3.4 V and a digital supply of 1.65 V to 3.6 V, providing flexible interface to 1.8 V or 3.3 V logic families. The converter produces either CMOS or LVDS DDR digital outputs, selectable per design, and is rated for the industrial -40 C to +85 C ambient temperature range. An ADC (Analog-to-Digital Converter) is a data acquisition component which samples continuous analog signals and converts them to discrete digital codes. Within the broader IC hierarchy, this device is a pipelined ADC, a sub-family of Nyquist-rate data converters (ADC -> data converter -> signal chain IC -> semiconductor). Pipelined ADCs use a multi-stage architecture that delivers high sampling rates at low power, making them the workhorse choice for communications, imaging, and instrumentation front ends where SAR converters are too slow and flash converters are too power-hungry. Key differentiating features of the IDTADC1010S125HN-C1 include 125 MSPS maximum sample rate, 10-bit resolution, single analog input channel, selectable CMOS / LVDS DDR output interface, and an integrated analog bandwidth suitable for IF undersampling. The part supports standby and power-down modes via the SPI control port, simplifying multi-ADC synchronization in larger systems. Its compact 40-HVQFN package keeps the PCB footprint small while the exposed pad provides a low thermal resistance path for high-temperature-grade applications. The IDTADC1010S125HN-C1 uses a multi-bit-per-stage pipelined architecture with on-chip track-and-hold and reference, which delivers low latency and consistent dynamic performance across input frequencies. The LVDS DDR output mode halves the output bus width and reduces pin count requirements on the FPGA or ASIC receiver, which is particularly valuable in dense multi-channel receiver designs. Typical applications for the IDTADC1010S125HN-C1 include IF signal digitization in software-defined radio, baseband sampling in wireless infrastructure, medical imaging front ends, and industrial process-control data acquisition cards. The wide analog supply range and CMOS/LVDS output flexibility let one hardware design serve both legacy 3.3 V DSP and modern 1.8 V FPGA platforms without level translators. When designing with this device, ensure the analog input network is bandwidth-matched to the target IF or baseband frequency and that the exposed pad is soldered to a sufficiently large copper pour to meet the package thermal resistance specification. Decouple VDDA and VDDO with 100 nF ceramic capacitors placed as close as possible to the supply pins, and route LVDS pairs with controlled 100 ohm differential impedance for reliable DDR clocking. This page synthesizes distributor pricing, drop-in alternatives from the same ADC1010S family, and practical layout notes that are not gathered together in the standalone manufacturer datasheet.

견적 요청 문의하기
IDTADC1015S065HN-C1 - 10-bit 65 MSPS Pipelined ADC | Renesas
IDTADC1015S065HN-C1

IDTADC1015S065HN-C1 - 10-bit 65 MSPS Pipelined ADC | Renesas

The Renesas IDTADC1015S065HN-C1 is a 10-bit pipelined analog-to-digital converter sampling at 65 MSPS, housed in a 40-pin HVQFN (6x6 mm) exposed-pad package. It integrates an input buffer and supports both CMOS and LVDS DDR digital outputs, giving system designers flexibility to interface with FPGAs, ASICs, or DSPs in mixed-signal designs. What is a pipelined ADC? A pipelined analog-to-digital converter is a multi-stage architecture that achieves high sampling speeds (tens to hundreds of MSPS) at moderate resolution (8-14 bits) by sub-ranging the conversion across cascaded low-resolution flash stages. Pipelined ADCs sit between flash converters (fastest, lowest resolution) and successive-approximation ADCs (slowest, highest accuracy), and are the workhorse of communications infrastructure, medical imaging, and industrial data acquisition. Key features include 65 MSPS guaranteed sampling rate, 10-bit resolution, on-chip input buffer that simplifies front-end analog design, selectable CMOS or LVDS DDR output modes, and low power consumption suitable for dense multi-channel systems. The HVQFN-40 exposed-pad package provides low thermal resistance for reliable performance across the industrial temperature range. The pipelined architecture delivers excellent dynamic performance with low latency per sample, while the integrated input buffer eliminates the need for an external high-bandwidth driver amplifier. Output configurability between single-ended CMOS and differential LVDS DDR allows the same device to serve legacy parallel interfaces and modern high-speed FPGA/ASIC links without changing the analog front end. Typical applications include communications base stations, medical imaging systems such as ultrasound receivers, portable instrumentation, radar signal processing, and general-purpose high-speed data acquisition. The 65 MSPS rate makes it well-suited for intermediate-frequency digitization in software-defined radio. When designing with this part, place the input RC network as close as possible to the analog input pins and bond the exposed thermal pad to a continuous ground plane to maintain specified ENOB and SFDR performance across temperature. This page synthesizes distributor pricing, drop-in alternatives within the ADC1015S family and competitor parts, and practical design notes that complement the manufacturer datasheet.

견적 요청 문의하기
IDTADC1015S080HN-C1 - 10-Bit 80 MSPS Pipeline ADC | Renesas
IDTADC1015S080HN-C1

IDTADC1015S080HN-C1 - 10-Bit 80 MSPS Pipeline ADC | Renesas

The Renesas Electronics IDTADC1015S080HN-C1 is a single-channel 10-bit pipelined Analog-to-Digital Converter (ADC) rated for 80 MSPS sampling, packaged in a 40-pin HVQFN exposed-pad (HN) configuration. Originally designed by Integrated Device Technology (IDT) and now part of the Renesas portfolio after the 2019 IDT acquisition, the ADC1015S family targets high dynamic performance and low power consumption in communications, instrumentation, and imaging front-ends. The 80 MSPS member of this family shares the same silicon core as the 65/105/125 MSPS ADC1015S variants, selected at test for the target sample rate, which simplifies qualification across a single PCB layout. What is a pipelined ADC? A pipelined ADC is an architecture that uses multiple low-resolution flash stages separated by sample-and-hold (SHA) and digital-error-correction blocks; pipelined ADCs convert one sample per clock cycle after the initial pipeline latency, giving high throughput (tens to hundreds of MSPS) at moderate resolution (typically 8 to 16 bits). They sit in the signal-chain taxonomy as Analog-to-Digital Converters (ADC) -> Data Converters -> Data Acquisition ICs -> Signal Conditioning -> Mixed-Signal ICs, and are widely used where parallel multi-MSample/s throughput is required without the power cost of a full flash converter. Key specifications include 10-bit resolution, 80 MSPS maximum conversion rate, a single analog input channel, and CMOS or LVDS DDR digital outputs for flexible host interfacing. The integrated input buffer eliminates the need for an external high-bandwidth driver in many applications. Power consumption is optimized for thermally-constrained systems, and the part supports both CMOS and DDR LVDS output modes for direct connection to FPGAs or ASICs. The pipelined architecture combined with an input buffer provides wide input bandwidth and excellent spurious-free dynamic range (SFDR) at the Nyquist frequency. Built-in reference and clock-management features reduce external component count, and the 40-HVQFN exposed pad provides a low thermal resistance path for heat removal. Typical applications include IF/RF sampling in communications receivers, medical imaging front-ends, instrumentation and oscilloscope digitizers, and digital beam-forming radar arrays. The combination of low power and high sample rate makes the ADC1015S080HN-C1 particularly suitable for portable or remote-head data-acquisition modules. When designing with this part, note that the exposed thermal pad must be soldered to a ground plane for correct heat dissipation; bypassing should use 100 nF ceramic capacitors placed within 5 mm of the supply pins. Selection of output mode (CMOS vs LVDS DDR) should be made in the schematic to match FPGA/ASIC receiver impedance. This page synthesizes distributor stock levels, application notes, and same-family drop-in alternatives not found on the Renesas product page, giving engineers a faster qualification path than searching datasheet PDFs alone.

견적 요청 문의하기
IDTADC1015S105HN-C1 - 10-bit 105MSPS 1-ch ADC | Renesas
IDTADC1015S105HN-C1

IDTADC1015S105HN-C1 - 10-bit 105MSPS 1-ch ADC | Renesas

The Renesas IDTADC1015S105HN-C1 is a 10-bit, single-channel, 105 MSPS analog-to-digital converter (ADC) housed in a 40-pin HVQFN (exposed-pad) package. It integrates a high-performance pipeline architecture with a low-jitter sampling clock input and an internal reference, delivering excellent dynamic performance for IF/RF digitisation in compact board areas. The part traces to the IDT (Integrated Device Technology) ADC1015 family, which was transferred to Renesas following the 2019 IDT acquisition and is now sold and supported under the Renesas brand. A single-channel pipelined ADC is a converter that uses a switched-capacitor pipeline topology to digitise one analog input at very high conversion rates while maintaining low power consumption. Pipelined ADCs sit within the broader converter hierarchy as: ADC -> Nyquist-rate ADC -> pipelined ADC -> data converter -> mixed-signal IC -> power management and signal chain. They are the workhorse of high-speed signal acquisition, occupying a middle ground between successive-approximation ADCs (low speed, low power) and flash ADCs (very high speed, very high power). The IDTADC1015S105HN-C1 therefore serves the engineering tier between general-purpose SAR ADCs (often <5 MSPS) and high-channel-count JESD204B-class gigasample converters. Key features include 10-bit resolution, 105 MSPS maximum sampling rate, single-channel input, LVDS/LVCMOS-compatible digital outputs, internal bandgap reference, and a -40 C to +85 C industrial operating range. The HVQFN-40 package provides a low thermal-resistance footprint that allows direct copper heatsinking via the exposed pad, while the small outline (typically 6 mm x 6 mm body) suits dense multi-converter layouts. Typical integrated INL is around +/-0.5 LSB and SNR is specified in the datasheet for the relevant input frequency. Typical applications include IF/RF signal acquisition in communications receivers, ultrasound front-end beamforming channels, portable instrumentation digitizers, radar preprocessing, and industrial imaging front-ends. The combination of moderate sampling rate (105 MSPS), 10-bit resolution, and small package also suits multi-channel data-acquisition systems where several ADCs are placed on one PCB. The pipelined core provides typically 5-7 clock-cycle latency, which is acceptable for streaming acquisition but requires a delay-matched sample clock for multi-channel phase alignment. When designing with this part, plan the analog-input network carefully: a wideband differential driver such as the AD8138 or a transformer-coupled front-end is normally placed within a few millimetres of the analog input pins to preserve the second- and third-harmonic distortion performance. Use a low-jitter clock source (typically <1 ps RMS) and isolate noisy digital outputs from the analog input traces with a continuous ground plane.

견적 요청 문의하기
IDTADC1115S125HN-C1 - 11-Bit 125 MSPS ADC | Renesas / IDT
IDTADC1115S125HN-C1

IDTADC1115S125HN-C1 - 11-Bit 125 MSPS ADC | Renesas / IDT

The Renesas (formerly IDT) IDTADC1115S125HN-C1 is an 11-bit, single-channel, 125 MSPS pipelined analog-to-digital converter housed in a 40-pin HVQFN (exposed pad) package. It is designed for high-speed data acquisition applications requiring moderate resolution and very high sampling rates. An ADC (Analog-to-Digital Converter) is a data acquisition component that converts continuous analog signals into discrete digital codes. Pipeline ADCs, such as this part, use a multi-stage architecture to achieve sample rates above 100 MSPS while consuming relatively low power. Within the signal chain hierarchy, this device sits between the analog front-end (amplifiers, anti-alias filters) and the digital processing block (FPGA, ASIC, or DSP). It belongs to the broader category of data-conversion ICs, which also includes DACs, audio codecs, and successive-approximation ADCs. Key features of the IDTADC1115S125HN-C1 include 11-bit resolution, a 125 MSPS maximum sampling rate, single-channel (1-CH) input architecture, LVDS/CMOS-compatible digital outputs, and an integrated input buffer. The pipelined architecture delivers excellent dynamic performance for IF sampling and baseband digitizing. The 40-pin HVQFN package with exposed thermal pad provides a compact footprint suitable for high-density PCB designs and ensures adequate heat dissipation at full operating speed. Typical applications include communications infrastructure (software-defined radio, IF sampling), medical imaging systems (ultrasound front-end), industrial inspection equipment (high-speed line-scan cameras), and defense electronics (radar signal processing). The combination of high sample rate and moderate resolution makes it well-suited for applications where bandwidth is more critical than absolute vertical resolution. When designing with this part, pay close attention to the analog input network: a properly designed transformer or differential driver is required to maximize SFDR and SNR. Decouple the AVDD and DRVDD supplies independently and route the LVDS outputs with controlled-impedance traces and 100-ohm differential termination. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
IDTADC1206S040H-C1 - 12-bit 40MSPS Flash ADC, 44-PQFP | Renesas
IDTADC1206S040H-C1

IDTADC1206S040H-C1 - 12-bit 40MSPS Flash ADC, 44-PQFP | Renesas

The Renesas Electronics (formerly IDT) IDTADC1206S040H-C1 is a 12-bit resolution, 40 MSPS sampling rate flash analog-to-digital converter (ADC) housed in a 44-pin Plastic Quad Flat Package (PQFP, 10x10 mm body). It provides 1 differential analog input channel with parallel CMOS-compatible digital output and achieves a low-power architecture optimized for high-speed signal acquisition. An ADC (Analog-to-Digital Converter) is a data-conversion integrated circuit that samples continuous-time analog signals and quantizes them into discrete digital codes for downstream DSP, FPGA, or microcontroller processing. ADCs form the bridge between the analog physical world (sensors, RF front-ends, video, audio) and the digital processing domain. The flash (parallel) architecture used in IDTADC1206S040H-C1 employs 2^N-1 comparators for N-bit resolution, enabling single-clock-cycle conversion at the cost of higher power and die area than successive-approximation or pipelined architectures. Key specifications include 12-bit resolution, 40 MSPS sampling rate, 1 input channel with differential input type, parallel data interface, surface-mount 44-PQFP (10x10) package, and a -40C to +85C operating temperature range. The flash conversion architecture delivers single-cycle latency and deterministic conversion time, which is essential for time-critical instrumentation, radar, and digital oscilloscope front-ends where pipeline delay cannot be tolerated. Typical applications include high-speed data acquisition systems, digital oscilloscopes, radar signal processing, IF sampling for software-defined radio (SDR), medical imaging front-ends, and industrial inspection cameras. The differential input improves common-mode noise rejection in electrically noisy environments. When designing with this device, ensure adequate PCB layout for the parallel CMOS outputs (44 pins, many of which are data lines) to minimize bus skew; use controlled-impedance traces and place decoupling capacitors within 5 mm of each supply pin. The flash architecture dissipates power proportional to sample rate, so thermal management may be required in dense multi-channel systems. This page synthesizes distributor pricing, drop-in alternatives from the Renesas IDT/ADC12 family, application reference designs, and PCB layout notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
IDTADC1206S040H-C18 - 12-Bit 40MSPS Flash ADC | Renesas | 44-PQFP
IDTADC1206S040H-C18

IDTADC1206S040H-C18 - 12-Bit 40MSPS Flash ADC | Renesas | 44-PQFP

The Renesas (formerly IDT) IDTADC1206S040H-C18 is a 12-bit, single-channel, 40 MSPS flash analog-to-digital converter in a 44-pin PQFP (10x10 mm) surface-mount package. It accepts a differential analog input, provides a parallel digital output, and operates from a single +5 V analog supply with a separate +5 V digital supply. What is a flash ADC? A flash ADC (also called a parallel ADC) is a data-converter architecture that uses one comparator per code level, enabling single-clock-cycle conversion. Flash ADCs sit at the top of the ADC taxonomy (flash > pipelined > successive-approximation > sigma-delta) and deliver the highest sampling rates at the cost of die area and power; the IDTADC1206S040H-C18 belongs to the high-speed data-acquisition IC family used in instrumentation, video digitisation and IF sampling. Key features include 40 MSPS sampling rate, 12-bit resolution, differential analog input, and a 5 V analog / 5 V digital supply pair. The device uses a 1:1 sample-and-hold to ADC front end and a flash conversion core, giving sub-microsecond conversion latency suitable for real-time signal capture. The 44-PQFP package provides 44 peripheral leads on a 10x10 mm body, easing PCB routing for mixed-signal designs that need separate analog and digital grounds. In typical applications the IDTADC1206S040H-C18 is used in industrial automation front-ends, automotive sensor digitisation, video and imaging front-ends, medical instrumentation, and IF/RF baseband digitisation up to ~20 MHz input. The parallel interface integrates directly into FPGAs, ASICs or microcontrollers with external bus support. When designing in this part, treat the analog and digital supplies as independent rails and decouple each with a 100 nF ceramic capacitor close to the package pins. Route the analog input with a controlled-impedance, 50 ohm differential transmission line and provide a low-jitter encode clock to preserve SNR. The 44-PQFP footprint requires thermal relief and generous analog ground pouring around pins 1 and 44 for best noise performance. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found on any single manufacturer or distributor page, giving engineers a one-stop reference for selecting or replacing the IDTADC1206S040H-C18.

견적 요청 문의하기
IDTADC1206S055H-C1 - 12-Bit 55MSPS Flash ADC | Renesas
IDTADC1206S055H-C1

IDTADC1206S055H-C1 - 12-Bit 55MSPS Flash ADC | Renesas

The Renesas IDTADC1206S055H-C1 is a 12-bit, 55 MSPS, single-channel flash analog-to-digital converter housed in a 44-pin PQFP (10x10 mm) surface-mount package. It features a differential analog input, a parallel data interface, and an on-chip sample-and-hold front-end, making it suitable for high-speed instrumentation and imaging front-ends. The device is qualified over the -40C to +85C industrial temperature range. A flash ADC (also called a parallel ADC) is a data converter that uses one comparator per code level to perform A/D conversion in a single clock cycle. Flash converters sit at the top of the ADC hierarchy: they are the fastest architecture available, trading power consumption and die area for the shortest possible conversion latency. As a 12-bit flash part, the IDTADC1206S055H-C1 contains 4095 comparators, places this part in the high-speed acquisition tier above successive-approximation (SAR) and pipelined ADCs of the same resolution. Key features of the IDTADC1206S055H-C1 include single 5 V analog supply operation, a 1:1 sample-and-hold to ADC ratio, differential input configuration, and CMOS-compatible parallel output. The 44-PQFP package provides a low-cost plastic platform for moderate-density board layouts, and the industrial temperature range allows deployment in factory-automation and outdoor instrumentation systems. At 55 MSPS the converter can digitize baseband signals up to approximately 25 MHz of Nyquist bandwidth. Designers using this part typically clock the converter with a low-jitter CMOS oscillator, drive the analog input with a high-bandwidth differential amplifier, and capture the 12-bit bus on the rising edge of the next conversion clock. The flash architecture adds wide input bandwidth and minimal pipeline delay compared to pipelined parts of similar speed. Typical applications include medical ultrasound receivers, digital oscilloscope front-ends, IF-sampling communications receivers, CCD and CMOS imaging front-ends, industrial machine-vision systems, and radar signal capture. The differential input simplifies DC-coupled or transformer-coupled front-end designs. When designing with this device, allocate at least one PCB ground plane dedicated to the analog input traces and bypass VDD with both 0.1 uF and 10 uF capacitors placed within 5 mm of the supply pin. The flash topology draws a substantial quiescent current; ensure the host regulator can supply the worst-case IDD before thermal shutdown engages. The 44-PQFP plastic package is not hermetic and should not be specified for aerospace or down-hole environments without a conformal coating plan. This page synthesizes distributor pricing, drop-in same-family alternatives, and PCB design notes drawn from the Renesas datasheet family, not just repeating the front-page specification table.

견적 요청 문의하기
IDTADC1206S055H-C18 - 12-bit 55 MSPS Flash ADC | 44-PQFP
IDTADC1206S055H-C18

IDTADC1206S055H-C18 - 12-bit 55 MSPS Flash ADC | 44-PQFP

The Renesas IDTADC1206S055H-C18 is a 12-bit, single-channel, flash-architecture analog-to-digital converter (ADC) sampling at 55 MSPS (mega-samples per second) in a 44-pin PQFP (Plastic Quad Flat Pack) 10x10 mm surface-mount package. The part operates from a single 5 V supply on both the analog and digital rails, features a differential analog input, and uses a parallel CMOS-compatible data interface. The flash architecture delivers single-cycle latency, making this converter well suited to high-speed control loops and video-rate digitisation where pipeline delay is unacceptable. A flash ADC (also called a direct-conversion ADC) uses a bank of 2^N - 1 parallel comparators to resolve an analog input in a single compare-and-encode step. The flash topology is the fastest ADC architecture available because conversion completes in one comparator latch plus encoder propagation delay, but power consumption and die area grow exponentially with resolution. The IDTADC1206S055H-C18 sits at the practical resolution ceiling for pure-flash designs at 12 bits, and is best understood within the taxonomy: ADC -> data converter -> data acquisition IC -> mixed-signal IC -> semiconductor. Key specifications of the IDTADC1206S055H-C18 include 12-bit resolution, 1 analog input channel, 55 MSPS sampling rate, 5 V analog and digital supply, and parallel output data interface. The differential input configuration improves common-mode noise rejection in noisy digital environments. The 44-PQFP (10x10) package provides adequate thermal dissipation for moderate clock rates and supports standard SMT reflow profiles. The flash architecture inherent in the IDTADC1206S055H-C18 makes it well suited to applications such as digital oscilloscope front-ends, radar IF digitisation, video broadcast equipment, and high-speed industrial inspection. The 55 MSPS sampling rate comfortably digitises IF signals up to approximately 25 MHz under Nyquist, while the 12-bit resolution gives 72 dB dynamic range suitable for many instrumentation and imaging tasks. When designing with this ADC, allocate a substantial analog ground plane under the input pins, decouple AVDD and DVDD with separate 100 nF ceramic capacitors as close to the pins as possible, and drive the analog input with a low-impedance differential amplifier terminated for the specified common-mode voltage. The parallel output bus can couple switching noise back into the analog front-end, so route output traces over a continuous digital ground and avoid running them parallel to the input traces.

견적 요청 문의하기
IDTADC1206S070H-C1 - 12-Bit 70MSPS Flash ADC | Renesas
IDTADC1206S070H-C1

IDTADC1206S070H-C1 - 12-Bit 70MSPS Flash ADC | Renesas

The Renesas IDTADC1206S070H-C1 is a 12-bit, 70 MSPS flash analog-to-digital converter (ADC) housed in a 44-pin PQFP package. The device targets high-speed data-acquisition front-ends in communications, medical imaging, and instrumentation systems, with a single 5 V analog and 5 V digital supply simplifying board-level power design. A flash ADC is a parallel-architecture data converter that uses 2^N-1 comparators to digitize an analog input in a single clock cycle, producing the fastest conversion latency of any ADC topology. The 12-bit flash architecture places this part in a high-speed niche between pipelined ADCs (typically 14-16 bits at lower sample rates) and lower-resolution high-speed flash parts (8-10 bits), targeting IF sampling, baseband quadrature demodulation, and digital oscilloscope channels. Key features include 12-bit resolution, 70 MSPS sampling rate, 44-pin PQFP surface-mount package, single +5 V analog supply, and single +5 V digital supply for I/O compatibility with 5 V CMOS logic. The flash architecture delivers single-cycle latency, making the part suitable for closed-loop control and real-time signal processing where pipeline delay would be unacceptable. The device integrates the reference, track-and-hold, and parallel digital output drivers on-chip, eliminating the need for external sample-and-hold circuitry. Parallel CMOS outputs at 70 MSPS make the part straightforward to interface to FPGAs or ASICs without requiring high-speed serializer-deserializer (SerDes) logic, simplifying PCB layout in moderate-channel-count systems. Typical applications include medical ultrasound beamforming, IF sampling in software-defined radio, CCD/CMOS imaging front-ends, digital oscilloscope input stages, and radar baseband digitizers. The 44-pin PQFP footprint is well-supported by hand-solderable prototyping and high-volume SMT lines alike. When designing with this part, allocate a solid ground plane under the analog and digital sections to minimize coupling between the parallel output bus (which switches at the clock rate) and the analog input. Keep the analog input trace length matched to the on-chip track-and-hold to preserve aperture accuracy, and decouple each supply pin with a 100 nF ceramic plus a 10 uF bulk capacitor placed within 5 mm of the pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the IDTADC1206S070H-C1 not found in the manufacturer datasheet alone.

견적 요청 문의하기
IDTADC1206S070H-C18 - 12-Bit 70MSPS Flash ADC | Renesas (IDT)
IDTADC1206S070H-C18

IDTADC1206S070H-C18 - 12-Bit 70MSPS Flash ADC | Renesas (IDT)

The Renesas (formerly IDT) IDTADC1206S070H-C18 is a 12-bit, 70 MSPS monolithic flash analog-to-digital converter housed in a 44-pin PQFP package. It combines a high-speed sample-and-hold front-end with a parallel CMOS-compatible digital interface, delivering single-channel conversion of differential analog inputs into 12-bit parallel data. The device targets mid-bandwidth signal acquisition where low latency and wide dynamic range are required. What is a Flash ADC? A Flash ADC is the fastest ADC architecture: it uses 2^N-1 parallel comparators to convert an analog voltage in a single comparator-cycle, producing an N-bit thermometer code that is then encoded to binary in real time. Flash ADCs belong to the family of direct-conversion (Nyquist) data converters, which sit alongside successive-approximation (SAR) and pipeline ADCs in the broader signal-chain IC hierarchy. Their single-cycle latency makes them ideal for oscilloscope front-ends, radar IF digitizers, and high-speed instrumentation. Key features include 12-bit native resolution, 70 MSPS sampling rate, 5 V analog and 5 V digital supply rails, differential analog input, and a single ADC channel. The flash architecture ensures deterministic, low-latency conversion (typically one clock cycle of pipeline delay), and the parallel output bus simplifies FPGA or ASIC capture without requiring a high-speed serial deserializer. The 44-PQFP surface-mount package offers manageable thermal performance for the typical <500 mW dissipation. Typical applications include digital oscilloscope front-ends, IF digitizers in communications receivers, radar signal processing, medical imaging front-ends, and general-purpose high-speed data acquisition cards. The 70 MSPS rate comfortably digitizes IF bandwidths up to ~35 MHz while preserving ENOB suitable for instrumentation-grade measurements. When designing with this device, follow the manufacturer's reference decoupling scheme of 100 nF plus 10 µF ceramic capacitors on each supply pin, and keep analog and digital grounds joined at a single point near the ADC. Maintain controlled-impedance differential traces from the analog driver to the input pins, and avoid routing digital output bus traces beneath the analog input package region to minimize digital-noise coupling.

견적 요청 문의하기
IDTADC1207S080HW-C2 - 12-Bit 80MSPS Flash ADC | 48-HTQFP
IDTADC1207S080HW-C2

IDTADC1207S080HW-C2 - 12-Bit 80MSPS Flash ADC | 48-HTQFP

The Renesas (formerly IDT) IDTADC1207S080HW-C2 is a 12-bit resolution, 80 MSPS (mega-samples per second) flash analog-to-digital converter (ADC) housed in a 48-pin HTQFP (7x7 mm) surface-mount package. It integrates a single ADC channel with differential inputs, a track-and-hold (S/H) front-end, parallel data interface, and a single-ended flash conversion architecture. The -C2 ordering suffix denotes the standard commercial/reel-packaging variant supplied on tape and reel for high-volume SMT assembly lines. What is a Flash ADC? A flash ADC is a high-speed analog-to-digital converter architecture that uses a parallel array of 2^N - 1 comparators (where N is the resolution) to convert an analog signal in a single clock cycle. Unlike successive-approximation or sigma-delta ADCs, flash converters achieve the highest sampling rates (often >50 MSPS) at the cost of higher power consumption and larger die area. Flash ADCs are a sub-category of Nyquist-rate ADCs and sit in the broader Data Converter > Analog-to-Digital Converter > Integrated Circuit hierarchy used in mixed-signal and high-speed signal processing systems. Key features include 12-bit native resolution, a single differential analog input channel, parallel CMOS/TTL digital outputs, and reference voltage inputs for setting the full-scale input range. Operating from a standard 3.3V analog supply, the converter is designed for high-speed waveform digitization, video digitization, radar IF sampling, communications demodulation, and instrumentation front-ends where a single sub-microsecond acquisition is required. The IDTADC1207S080HW-C2 uses a fully parallel comparator-based architecture with an integrated sample-and-hold to reduce aperture uncertainty and support up to 80 MSPS conversion rates. The differential input structure improves common-mode noise rejection, which is critical in noisy digital environments where switching transients from surrounding FPGAs and DSPs can couple into the analog front-end. The parallel data bus simplifies downstream interfacing with FPGAs and ASICs, eliminating the latency and clock-multiplication overhead of serial LVDS interfaces. Typical applications include medical ultrasound front-ends, digital oscilloscopes and waveform digitizers, IF sampling for software-defined radio (SDR), radar pulse receivers, and high-speed data acquisition cards for industrial inspection. Designers choose this device when 12-bit resolution at 80 MSPS is sufficient and a parallel (not serial LVDS) output simplifies FPGA capture logic. When designing with this ADC, ensure the analog input network provides the correct common-mode bias and termination for the differential inputs. Decouple the AVDD supply with a 10 uF bulk and 0.1 uF ceramic capacitor close to each supply pin, and keep the analog input traces length-matched and guarded by a continuous ground plane to preserve SNR at the 80 MSPS conversion rate. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
IDTADC1207S080HW-C28 - 12-bit 80 MSPS Flash ADC | Renesas
IDTADC1207S080HW-C28

IDTADC1207S080HW-C28 - 12-bit 80 MSPS Flash ADC | Renesas

The Renesas IDTADC1207S080HW-C28 (formerly IDT) is a single-channel 12-bit analog-to-digital converter optimized for direct/ultra-high IF sampling at up to 80 MSPS, housed in a 48-pin TQFP (7x7 mm) package. It supports cellular infrastructure, wireless base stations, optical networking and fixed telecommunication systems where broadband IF digitisation is required. The device combines a pipelined flash front-end with on-chip reference and track-and-hold to deliver 80 MHz analog input bandwidth, 72 dB SNR at 30 MHz input, and 450 mW typical power dissipation from a single 3.3 V analog / 3.3 V digital supply. A flash or pipelined ADC is a mixed-signal data converter that samples a continuous analog waveform at a fixed clock rate and produces parallel digital codes; pipelined architectures trade a few cycles of latency in favour of much lower power and smaller die area than a full flash design. The ADC1207S080 family is positioned for IF-sampling receivers, sitting in the hierarchy pipeline ADC -> ADC -> data converter -> data acquisition IC -> mixed-signal semiconductor, where its 80 MHz analog input allows direct digitisation of intermediate frequencies without an analog down-conversion stage. Key features include 12-bit resolution, 80 MSPS maximum conversion rate, single 3.3 V supply operation, 1 Vp-p full-scale analog input, integrated track-and-hold amplifier, internal sample-and-hold clock driver, and an LVCMOS-compatible parallel digital interface. The 48-TQFP (7x7) package offers a 0.5 mm lead pitch suitable for standard SMT assembly lines and supports the -40C to +85C operating temperature range required for outdoor telecom infrastructure. The architecture is built on a multi-stage pipeline with per-stage flash sub-ADC and digital error correction, achieving 12-bit linearity (DNL/INL within +/-1 LSB typical) while running at 80 MSPS. The wide analog input bandwidth enables direct sampling of IF frequencies up to 150 MHz, simplifying receiver design by eliminating an analog mixer stage and improving overall system linearity and cost. Typical applications include multi-carrier GSM/UMTS/LTE base-station receivers, cable-headend digitisation, optical transport SONET/SDH line-card ADCs, and broadband test-and-measurement digitiser front-ends. The wide input bandwidth also suits radar IF, software-defined radio and digital oscilloscope front-end cards. The 450 mW dissipation at 80 MSPS allows forced-air or convection cooling in 1U/2U shelf designs without heatsinks. When designing with this device, follow the recommended differential analog input drive with a 1 Vp-p full-scale range centred on a common-mode voltage of 1.65 V, and decouple AVDD/DVDD separately to minimise switching noise coupling into the analog front-end. For replacement scenarios, only the -C28 variant (Pb-free tape and reel, 2500 pcs) is drop-in compatible with this part number, while other speed grades in the ADC1207S family differ in maximum sampling rate and require re-qualification. This page synthesises the manufacturer datasheet, distributor pricing as of 2026-10-13, drop-in alternative analysis, and practical RF/IF design notes not found on individual vendor listings.

견적 요청 문의하기