집적 회로

하위 카테고리

📁 ADC/DAC 3,100+ 제품 📁 증폭기 IC 1,900+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 660+ 제품 📁 Comparator ICs 1 제품 📁 DSP 1,100+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 7,300+ 제품 📁 인터페이스 IC 3,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 460+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 20,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 14 제품

제품 (39,000+)

MK2704STR - 36.864MHz PLL Audio Clock Synthesizer | Renesas (Tape & Reel)
MK2704STR

MK2704STR - 36.864MHz PLL Audio Clock Synthesizer | Renesas (Tape & Reel)

The Renesas Electronics MK2704STR is a low-cost, low-jitter PLL audio clock synthesizer with a maximum frequency of 36.864MHz, selectable clock or crystal input, CMOS output, and PLL bypass capability, housed in an 8-pin SOIC package. It is designed to consolidate oscillator and PLL functions in multimedia systems and set-top boxes. A PLL clock synthesizer multiplies or organizes a reference clock into a stable operating or audio sampling clock. In the signal path, it belongs to clock and timing ICs, where its role is to generate predictable digital timing from a crystal or external reference. The available ratio of 1:2 indicates that this device family is intended for a defined clock-generation relationship rather than general-purpose fractional-N synthesis. Key verified features include PLL operation with bypass, clock or crystal input, one clock circuit, and a CMOS output. The bypass path is useful during startup, test, or mode transitions, while the PLL path supports synthesized clock generation. The 36.864MHz maximum frequency makes the device applicable to multimedia timing systems operating around common digital audio-related clock domains, subject to the complete manufacturer datasheet limits. The MK2704STR uses a single 8-pin SOIC package according to the available distributor records. The package supports conventional surface-mount assembly and can simplify board replacement compared with discrete oscillator-plus-divider assemblies. Its architecture is intended to replace separate oscillator and PLL circuits in set-top box and multimedia equipment, reducing board count while centralizing clock generation. Typical uses include set-top box clock generation, multimedia system timing, digital audio interfaces, and other embedded systems requiring a CMOS clock with bypass control. When designing around the device, verify crystal start-up requirements, output loading, supply voltage, and all operating conditions against the manufacturer datasheet. Because the supplied evidence is distributor-oriented and does not include a complete official parametric table, unverified values are not inferred. This product page combines verified source snippets, application guidance, source links, and engineering caveats rather than inventing electrical ratings. It distinguishes known specifications from fields that require confirmation in the manufacturer datasheet, helping engineers identify the MK2704STR quickly while avoiding unsupported claims.

견적 요청 문의하기
MK2705S - 24.576MHz Audio Clock Synthesizer | Renesas
MK2705S

MK2705S - 24.576MHz Audio Clock Synthesizer | Renesas

The Renesas Electronics MK2705S is a clock and frequency synthesizer IC with a nominal 24.576 MHz output, one clock output, PLL capability, and an 8-pin SOIC package. It is designed for audio and MPEG clock-generation systems. According to the distributor data, the MK2705S can provide synchronous clock generation for audio sampling rates derived from an MPEG stream or operate as a standalone clock source with a 27 MHz crystal. A clock synthesizer is a timing IC that generates or distributes a controlled clock signal used to synchronize digital circuits. In the hierarchy of electronic components, the MK2705S belongs to the clock and timing category, then to clock generators and frequency synthesizers, and ultimately to integrated timing semiconductors. Its purpose is to provide a stable timing reference for audio sampling, MPEG-related equipment, and other clock-sensitive systems. The verified listing identifies PLL operation, one output, a 1:1 input-to-output ratio, and a primary purpose of audio and MPEG. The same listing describes support for clock and crystal inputs, while the distributor record specifies 8-SOIC packaging and a 24.576 MHz frequency. These details support applications requiring a defined audio-clock source, although operating voltage, supply current, jitter, temperature range, and exact electrical limits require confirmation from the manufacturer datasheet. The MK2705 architecture is intended to separate timing generation from the surrounding digital signal chain. Using a dedicated clock synthesizer can simplify clock distribution and help ensure that multiple downstream circuits receive the intended frequency relationship. In an MPEG or audio system, the relevant clock must match the sampling architecture, so the selected frequency and input configuration should be checked against the system specification before layout release. Typical uses include MPEG audio equipment, digital audio sampling systems, clock recovery modules, and embedded audio interfaces that require a stable reference clock. The 8-SOIC package is suitable for conventional surface-mount PCB assembly, provided the recommended footprint, decoupling, crystal or clock-input layout, and output-routing guidance in the manufacturer datasheet are followed. The principal design consideration is exact frequency compatibility. MK2705S should be selected only where the required clock is 24.576 MHz or where the supported synthesis mode matches the intended input. Verify pin names, input frequency limits, output jitter, supply voltage, and package tolerances against the current Renesas documentation before production. This page consolidates distributor listings, the available datasheet references, package information, and application guidance for MK2705S. It also distinguishes verified facts from parameters that still require datasheet confirmation, helping engineers avoid unsupported assumptions during component selection.

견적 요청 문의하기
MK2705SLF - 24.576MHz Audio Clock Source | Renesas | SOIC-8
MK2705SLF

MK2705SLF - 24.576MHz Audio Clock Source | Renesas | SOIC-8

The Renesas Electronics MK2705SLF is an audio clock source IC featuring a 24.576 MHz clock generator, one clock output, and an 8-pin SOIC package. Designed for MPEG audio sampling systems, it can generate synchronous audio sampling clocks derived from an MPEG stream or operate as a standalone clock source with a 27 MHz crystal. The device uses Renesas PLL technology to provide low phase noise and long-term jitter performance in a compact surface-mount package. Its 24.576 MHz output is directly associated with audio-clock generation for digital audio systems, helping synchronize converters and clock-consuming digital logic. An audio clock source is a specialized clock-and-timing IC within the broader integrated-circuit hierarchy. In digital audio equipment, clocks establish the timing reference used to sample and process audio data. The MK2705SLF combines clock-generation functions with an 8-SOIC package, making it suitable for compact consumer and industrial audio assemblies where a stable reference clock is required. The MK2705 provides one output at 24.576 MHz and supports either MPEG-stream-derived clock generation or standalone operation using a 27 MHz crystal. According to the Renesas MK2705 datasheet, its PLL-based architecture is designed to provide good phase noise and long-term jitter characteristics. The fixed 24.576 MHz frequency is particularly relevant to audio sampling-clock requirements and clock distribution in digital audio equipment. Typical uses include MPEG audio source equipment, digital audio processing boards, audio converter clocking, digital recording interfaces, and embedded audio systems. The single-output arrangement is appropriate where one derived audio reference is sufficient. Designers should confirm output format, supply requirements, crystal support, and timing margins against the datasheet before committing the circuit to production. A key implementation consideration is that the source mode and external support network must match the intended clock architecture. Use the manufacturer recommended crystal and load-capacitor arrangement when operating standalone, and account for PLL lock and jitter requirements in the receiving audio subsystem. PCB layout should keep the oscillator path short and isolate clock routing from noisy digital and power-conversion nodes. This page combines verified manufacturer and distributor information with application guidance, package details, and practical replacement considerations. It supplements the Renesas datasheet and distributor listings with engineering context for clock-source selection, layout, sourcing, and same-footprint replacement evaluation.

견적 요청 문의하기
MK2705SLFTR - 24.576MHz Audio Clock Source | Renesas | SOIC-8 (Tape & Reel)
MK2705SLFTR

MK2705SLFTR - 24.576MHz Audio Clock Source | Renesas | SOIC-8 (Tape & Reel)

The Renesas Electronics MK2705SLFTR is an audio clock source IC featuring a 24.576 MHz clock generator, one clock output, and an 8-pin SOIC package. Designed for MPEG audio sampling systems, it can generate synchronous audio sampling clocks derived from an MPEG stream or operate as a standalone clock source with a 27 MHz crystal. The device uses Renesas PLL technology to provide low phase noise and long-term jitter performance in a compact surface-mount package. Its 24.576 MHz output is directly associated with audio-clock generation for digital audio systems, helping synchronize converters and clock-consuming digital logic. An audio clock source is a specialized clock-and-timing IC within the broader integrated-circuit hierarchy. In digital audio equipment, clocks establish the timing reference used to sample and process audio data. The MK2705SLFTR combines clock-generation functions with an 8-SOIC package, making it suitable for compact consumer and industrial audio assemblies where a stable reference clock is required. The MK2705 provides one output at 24.576 MHz and supports either MPEG-stream-derived clock generation or standalone operation using a 27 MHz crystal. According to the Renesas MK2705 datasheet, its PLL-based architecture is designed to provide good phase noise and long-term jitter characteristics. The fixed 24.576 MHz frequency is particularly relevant to audio sampling-clock requirements and clock distribution in digital audio equipment. Typical uses include MPEG audio source equipment, digital audio processing boards, audio converter clocking, digital recording interfaces, and embedded audio systems. The single-output arrangement is appropriate where one derived audio reference is sufficient. Designers should confirm output format, supply requirements, crystal support, and timing margins against the datasheet before committing the circuit to production. A key implementation consideration is that the source mode and external support network must match the intended clock architecture. Use the manufacturer recommended crystal and load-capacitor arrangement when operating standalone, and account for PLL lock and jitter requirements in the receiving audio subsystem. PCB layout should keep the oscillator path short and isolate clock routing from noisy digital and power-conversion nodes. This page combines verified manufacturer and distributor information with application guidance, package details, and practical replacement considerations. It supplements the Renesas datasheet and distributor listings with engineering context for clock-source selection, layout, sourcing, and same-footprint replacement evaluation.

견적 요청 문의하기
MK2705STR - MPEG Audio Clock Synthesizer | Renesas
MK2705STR

MK2705STR - MPEG Audio Clock Synthesizer | Renesas

The Renesas MK2705STR is an integrated audio clock synthesizer that generates synchronous sampling-clock rates derived from an MPEG stream and can also operate as a standalone clock source using a 27 MHz crystal. Its verified device classification includes one PLL, clock or crystal input, and clock output, with a documented 1:1 input-output ratio. The part is supplied in an 8-pin SOIC package, making it suitable for compact digital audio, MPEG decoder, and consumer-electronics clock architectures. A clock synthesizer is a clock-and-timing integrated circuit that creates, distributes, or translates timing signals for another circuit. In an MPEG audio system, the synthesizer derives the sampling rate required by an audio decoder or interface. This clock-generation function sits within the broader timing hierarchy of a PLL, clock generator, clock and timing IC, and ultimately system clock infrastructure. The MK2705 supports both stream-derived operation and standalone operation, allowing a design to cover multiple source conditions. The verified feature set emphasizes integration rather than a broad set of published numeric ratings. It includes PLL capability, one clock circuit, clock or crystal input, clock output, and an input-to-output ratio of 1:1. Search results identify the primary use as MPEG audio, while the 27 MHz crystal mode provides a reference for designs that do not require an MPEG-derived source. These details make the device directly relevant to audio sampling-clock generation rather than general-purpose distribution. The MK2705STR belongs to the clock-and-timing hierarchy and is listed as an audio clock source in distributor results. That classification distinguishes it from oscillators, microcontrollers, and ordinary fixed-function logic. A PLL can phase-lock and derive a stable output frequency from a source, while the integrated clock output routes the generated timing signal within the audio subsystem. The supplied evidence does not provide verified operating voltage, frequency range, jitter, phase-noise, or power-consumption figures, so these values must be confirmed in the Renesas datasheet before production design. Typical uses include MPEG audio decoder boards, digital audio sampling-clock generation, multimedia clock trees, and systems where a 27 MHz crystal reference is available. In an MPEG-derived architecture, the device reduces the need for separate clock-generation logic. In standalone mode, it provides a controlled clock path from the specified crystal source. Designers should still evaluate startup time, lock behavior, output format, and signal integrity against the exact system timing requirements. The main design consideration is source and package verification. Confirm the exact pin mapping, supply requirements, crystal network, output enable behavior, and decoupling recommendations in the official Renesas MK2705 datasheet. Because the supplied web data does not include those detailed values, the appropriate engineering approach is to treat them as required design inputs rather than inferred specifications. This page consolidates verified distributor and manufacturer information, distinguishes confirmed facts from missing parameters, and provides practical application guidance for engineers evaluating the MK2705STR.

견적 요청 문의하기
MK2712S - 35.469MHz NTSC/PAL Clock Source | Renesas
MK2712S

MK2712S - 35.469MHz NTSC/PAL Clock Source | Renesas

The Renesas Electronics MK2712S is an NTSC/PAL clock source with a listed operating frequency of 35.469 MHz, supplied in an 8-pin SOIC package measuring 3.90 mm wide. It is intended to generate the clocks required by compatible NTSC and PAL video encoders and decoders. The verified distributor description identifies the device as a clock synthesizer and video IC, while the manufacturer document identifies the MK2712 family as a dedicated NTSC/PAL clock-source solution. What is an NTSC/PAL clock source? It is a specialized clock and timing integrated circuit that supplies predictable video-system timing to encoder or decoder circuitry. NTSC and PAL are legacy analog video standards with different timing relationships, and compatible logic may require a stable reference rather than a general-purpose oscillator. Within the clock and timing hierarchy, the MK2712S belongs to the clock generator and frequency synthesizer class, supporting video clock generation within a broader timing-IC and semiconductor system. The available verified information confirms one clock value, 35.469 MHz, and an 8-pin SOIC package with a stated width of 3.90 mm. A third-party technical result also states that the family stores two sets of popular frequencies for NTSC and PAL, allowing clock generation with fewer external components than a discrete implementation. This integration can reduce board area and component count when its fixed outputs match the target video circuitry. Supply voltage, current consumption, output waveform, frequency tolerance, and temperature range were not included in the supplied evidence and therefore remain unconfirmed here. Architecturally, the device is presented as a dedicated clock source rather than a general-purpose phase-locked loop. Such fixed-function timing can simplify legacy video designs because engineers do not need to derive every standard-specific clock with separate dividers or oscillators. The exact selectable outputs, control method, and electrical timing characteristics must be confirmed in the Renesas MK2712 datasheet before layout or production release. Typical uses include NTSC video encoders, PAL video encoders, NTSC decoders, PAL decoders, industrial video equipment, broadcast-interface circuitry, and legacy video test systems. It is most appropriate where the downstream circuitry specifically expects the supported MK2712 clock outputs and where an 8-pin SOIC footprint fits the existing mechanical constraints. A key design practice is to follow the manufacturer reference connection and pin definitions exactly. Confirm signal levels, decoupling, exposed routing requirements if any, output availability, and timing margins against the official MK2712 datasheet before substitution. Because the supplied evidence does not establish an electrically interchangeable modern replacement, any alternate part should be treated as a new design until its pinout and output behavior are verified.

견적 요청 문의하기
MK2712SLF - 35.469MHz NTSC/PAL Clock Source | Renesas
MK2712SLF

MK2712SLF - 35.469MHz NTSC/PAL Clock Source | Renesas

Renesas Electronics MK2712SLF is a single-channel video clock synthesizer and NTSC/PAL clock source with a nominal output frequency of 35.469 MHz, supplied in an 8-pin SOIC package measuring 3.90 mm wide. The device is intended for video timing applications requiring a dedicated NTSC or PAL-related clock reference rather than a general-purpose fixed-frequency oscillator. A clock synthesizer is a timing integrated circuit that generates or organizes one or more frequency references for downstream digital and analog systems. Within the clock and timing hierarchy, it belongs to the clock generator and PLL family and ultimately to the broader timing IC category. Video clock synthesizers are used when multiple video functions must share a stable, defined timing relationship, particularly in broadcast, capture, processing, and display equipment. The verified product listing identifies the MK2712SLF as a clock synthesizer and video IC with one channel, a 35.469 MHz nominal frequency, and an 8-SOIC package. Distributor information also describes it as an NTSC/PAL clock source. These characteristics make frequency stability, output behavior, supply requirements, and timing margins the primary engineering concerns when evaluating this device for a new video design. The MK2712SLF is used where the system requires a dedicated video timing reference rather than a general-purpose clock. Its single-channel architecture is appropriate for designs that establish a central NTSC/PAL-related timing point and distribute that reference to other circuit blocks. Designers should confirm that the generated frequency matches every video standard and timing requirement in the target system before releasing production hardware. Typical uses include video capture systems, broadcast-equipment clocking, NTSC/PAL-compatible processing chains, and multi-function video boards. In these applications, the clock reference establishes timing for video signal generation and downstream conversion or processing. Because different video standards use different timing parameters, a fixed 35.469 MHz source must be integrated only where its timing role is understood and validated. The principal design consideration is verification of the complete clock path. Evaluate output frequency, tolerance, jitter, noise, supply range, and logic levels against the downstream video ICs before layout. Decoupling and return paths should follow the requirements in the manufacturer datasheet, and unused outputs or control pins must not be assigned functions without confirmation from that document. This page combines the verified Renesas and distributor information with practical procurement context, explicit data gaps, package details, and a conservative review of available video-clock alternatives. It is designed to help engineers distinguish confirmed MK2712SLF facts from characteristics that still require datasheet-level verification.

견적 요청 문의하기
MK2712SLFTR - NTSC/PAL Clock Source | Renesas | 35.469MHz
MK2712SLFTR

MK2712SLFTR - NTSC/PAL Clock Source | Renesas | 35.469MHz

The Renesas Electronics MK2712SLFTR is an NTSC/PAL video clock synthesizer with PLL capability, a maximum frequency of 35.469 MHz, one clock circuit, and CMOS output in an 8-pin SOIC package. Designed as a dedicated clock source for legacy video timing systems, it supports the NTSC and PAL color-system requirements that shaped many analog video, broadcast, and video-processing products. The SOIC-8 package supports conventional surface-mount PCB assembly while preserving a compact implementation. A video clock synthesizer is a clock-and-timing integrated circuit that generates or organizes timing signals required by video systems. Within the product hierarchy, a video clock synthesizer is a specialized clock generator, which belongs to clock and timing ICs, integrated circuits, and semiconductors. Its PLL architecture supports frequency generation or conditioning, while the CMOS output provides a logic-compatible clock signal for downstream counters, timing circuits, and video-processing stages. The MK2712SLFTR provides one clock circuit, a maximum listed frequency of 35.469 MHz, PLL support, clock input, and CMOS output. These characteristics distinguish it from general-purpose fixed-frequency oscillators and make it applicable where NTSC or PAL video timing is required. The single-circuit architecture also keeps the device focused on a compact legacy-video timing function rather than a multi-output modern clock-tree role. The 8-SOIC package measures 0.154 inches wide, corresponding to a 3.90 mm package width, and is identified by the LFTR ordering code. Its eight pins provide the physical interface for power, ground, clock input, control, and generated timing signals. Exact pin names, voltage ratings, operating-temperature limits, and timing tolerances should be taken from the manufacturer pin-description table when assigning PCB nets or evaluating signal timing margins. Typical MK2712SLFTR applications include NTSC and PAL video timing generation, analog video processing equipment, broadcast-related clocking, and legacy video test systems. In each case, the device can establish the foundational timing reference used by downstream synchronization logic. Its single clock circuit suits systems that require a dedicated video-standard clock without a larger multi-channel timing architecture. Designers should verify output frequency tolerance, input-reference requirements, PLL lock behavior, and logic thresholds against the manufacturer datasheet before layout is released. Decoupling and signal-routing practices should follow the reference circuit associated with the selected device, while unused inputs require the prescribed bias states. Because timing specifications are sensitive to trace loading and supply integrity, short clock routes and a stable local supply connection are important. This page combines the verified device identity, package and clock-source characteristics with a drop-in comparison, application guidance, and practical design considerations. It is intended to help engineers identify the correct legacy video timing device, confirm package compatibility, and plan a clock-source implementation without relying on generic oscillator-selection guidance.

견적 요청 문의하기
MK2712STR - 35.469MHz NTSC/PAL Clock Source | Renesas (Tape & Reel)
MK2712STR

MK2712STR - 35.469MHz NTSC/PAL Clock Source | Renesas (Tape & Reel)

The Renesas Electronics MK2712STR is an NTSC/PAL clock source with a listed operating frequency of 35.469 MHz, supplied in an 8-pin SOIC package measuring 3.90 mm wide. It is intended to generate the clocks required by compatible NTSC and PAL video encoders and decoders. The verified distributor description identifies the device as a clock synthesizer and video IC, while the manufacturer document identifies the MK2712 family as a dedicated NTSC/PAL clock-source solution. What is an NTSC/PAL clock source? It is a specialized clock and timing integrated circuit that supplies predictable video-system timing to encoder or decoder circuitry. NTSC and PAL are legacy analog video standards with different timing relationships, and compatible logic may require a stable reference rather than a general-purpose oscillator. Within the clock and timing hierarchy, the MK2712STR belongs to the clock generator and frequency synthesizer class, supporting video clock generation within a broader timing-IC and semiconductor system. The available verified information confirms one clock value, 35.469 MHz, and an 8-pin SOIC package with a stated width of 3.90 mm. A third-party technical result also states that the family stores two sets of popular frequencies for NTSC and PAL, allowing clock generation with fewer external components than a discrete implementation. This integration can reduce board area and component count when its fixed outputs match the target video circuitry. Supply voltage, current consumption, output waveform, frequency tolerance, and temperature range were not included in the supplied evidence and therefore remain unconfirmed here. Architecturally, the device is presented as a dedicated clock source rather than a general-purpose phase-locked loop. Such fixed-function timing can simplify legacy video designs because engineers do not need to derive every standard-specific clock with separate dividers or oscillators. The exact selectable outputs, control method, and electrical timing characteristics must be confirmed in the Renesas MK2712 datasheet before layout or production release. Typical uses include NTSC video encoders, PAL video encoders, NTSC decoders, PAL decoders, industrial video equipment, broadcast-interface circuitry, and legacy video test systems. It is most appropriate where the downstream circuitry specifically expects the supported MK2712 clock outputs and where an 8-pin SOIC footprint fits the existing mechanical constraints. A key design practice is to follow the manufacturer reference connection and pin definitions exactly. Confirm signal levels, decoupling, exposed routing requirements if any, output availability, and timing margins against the official MK2712 datasheet before substitution. Because the supplied evidence does not establish an electrically interchangeable modern replacement, any alternate part should be treated as a new design until its pinout and output behavior are verified.

견적 요청 문의하기
MK2716S - 74.25MHz HDTV Clock Synthesizer | Renesas
MK2716S

MK2716S - 74.25MHz HDTV Clock Synthesizer | Renesas

The Renesas Electronics MK2716S is an HDTV clock synthesizer operating at 74.25 MHz and packaged in an 8-pin SOIC measuring 0.154 inches, or 3.90 mm, in width. Search results identify the device as a clock synthesizer and video IC with PLL-based frequency synthesis for video timing applications. The component is associated with the MK2716 family and is offered in tube packaging according to the supplied distributor records. A clock synthesizer is a timing IC that generates or distributes clock signals required by digital systems. In a PLL-based implementation, a phase-locked loop compares a reference signal with a divided output and adjusts the controlled oscillator until the two signals are synchronized. Clock synthesizers belong to the clock and timing IC hierarchy and support video, communications, and other systems that require stable reference-derived timing. The verified data identifies the MK2716S as a single PLL clock synthesizer, an HDTV clock synthesizer, and a 74.25 MHz device in an 8-pin SOIC package. These descriptions indicate a specialized timing function rather than a general-purpose oscillator or microcontroller. The exact output configuration, reference frequency, voltage ratings, jitter, pin functions, and operating limits are not present in the supplied verified records and must be confirmed in the manufacturer datasheet before design release. The part is associated with HDTV and video clock-generation requirements. A synthesized clock can provide a controlled timing reference to video-processing chains, display equipment, converters, and related digital video systems. The 74.25 MHz designation is a concrete nominal operating point in the provided distributor record, but the supplied data does not establish tolerance, output count, or configuration details. For PCB design, verify the exposed SOIC footprint, pin assignment, power rails, ground-return requirements, and recommended decoupling directly from the current Renesas datasheet. Do not substitute a generic clock IC solely because its frequency is similar; clock polarity, edge relationships, jitter, supply voltage, and system timing requirements must match. This page consolidates verified distributor descriptions, manufacturer-document references, packaging information, and engineering guidance. It does not infer missing electrical specifications, and unsupported values are marked for data completion rather than guessed.

견적 요청 문의하기
MK2716SLF - 74.25MHz HDTV Clock Synthesizer | Renesas
MK2716SLF

MK2716SLF - 74.25MHz HDTV Clock Synthesizer | Renesas

The Renesas Electronics MK2716SLF is a 74.25 MHz HDTV clock synthesizer packaged in an 8-pin SOIC measuring 0.154 inch, or 3.90 mm, in width. The verified distributor data identifies one output and a 3 V to 5.5 V supply range. Its fixed 74.25 MHz frequency is associated with conventional HDTV video timing systems, where a stable common clock is needed by multiple digital video processing blocks. The surface-mount SOIC package supports automated board assembly, while the small footprint suits equipment where board area is constrained. A clock synthesizer is a timing IC that derives one or more predictable clock outputs from a stable frequency source. Within the clock and timing hierarchy, a clock synthesizer belongs to oscillator and clock-generation circuitry, which supports digital logic, video processing, communications, and other sequential systems. The MK2716 series is specifically described by Renesas as an HDTV clock synthesizer and is intended to replace discrete crystal-and-oscillator arrangements with a dedicated timing component where appropriate. The verified product information establishes a 74.25 MHz output, one available clock output, and a 3 V to 5.5 V operating supply range. These three characteristics make the device relevant to legacy or specialized HDTV designs that operate from standard low-voltage rails. Because the supplied snippets do not state the complete electrical characteristics, designers should consult the Renesas MK2716 datasheet before establishing output amplitude, input-frequency tolerance, jitter, power consumption, temperature limits, or timing margins. The MK2716's fixed clock output simplifies system partitioning when downstream circuits already require the 74.25 MHz HDTV reference. It can feed digital video timing, synchronization, interface-conversion, or processing blocks, provided their input levels and clock requirements match the device. Compared with a discrete crystal oscillator network, an integrated synthesizer can reduce component count and standardize clock generation, but it must still be supported by correct decoupling and controlled board layout. Typical implementation places the clock generator near the loads it serves and connects its supply to a clean 3 V to 5.5 V rail. Short traces help limit added delay and susceptibility to noise. The SOIC package requires adequate spacing from board edges and neighboring components, while the power and ground pins must follow the manufacturer's recommended layout. Load capacitance, fanout, and termination should be checked against downstream requirements. The key design trade-off is specialization. A dedicated 74.25 MHz HDTV clock synthesizer is appropriate when the system requires that reference, but it is not a universal programmable clock solution. Confirm source frequency, output count, supply voltage, logic levels, package, and pinout against the current manufacturer datasheet before layout release. This page distinguishes verified facts from parameters that were not present in the supplied data.

견적 요청 문의하기
MK2716SLFTR - 74.25MHz HDTV Clock Synthesizer | Renesas (Tape & Reel)
MK2716SLFTR

MK2716SLFTR - 74.25MHz HDTV Clock Synthesizer | Renesas (Tape & Reel)

The Renesas Electronics MK2716SLFTR is a 74.25 MHz HDTV clock synthesizer packaged in an 8-pin SOIC measuring 0.154 inch, or 3.90 mm, in width. The verified distributor data identifies one output and a 3 V to 5.5 V supply range. Its fixed 74.25 MHz frequency is associated with conventional HDTV video timing systems, where a stable common clock is needed by multiple digital video processing blocks. The surface-mount SOIC package supports automated board assembly, while the small footprint suits equipment where board area is constrained. A clock synthesizer is a timing IC that derives one or more predictable clock outputs from a stable frequency source. Within the clock and timing hierarchy, a clock synthesizer belongs to oscillator and clock-generation circuitry, which supports digital logic, video processing, communications, and other sequential systems. The MK2716 series is specifically described by Renesas as an HDTV clock synthesizer and is intended to replace discrete crystal-and-oscillator arrangements with a dedicated timing component where appropriate. The verified product information establishes a 74.25 MHz output, one available clock output, and a 3 V to 5.5 V operating supply range. These three characteristics make the device relevant to legacy or specialized HDTV designs that operate from standard low-voltage rails. Because the supplied snippets do not state the complete electrical characteristics, designers should consult the Renesas MK2716 datasheet before establishing output amplitude, input-frequency tolerance, jitter, power consumption, temperature limits, or timing margins. The MK2716's fixed clock output simplifies system partitioning when downstream circuits already require the 74.25 MHz HDTV reference. It can feed digital video timing, synchronization, interface-conversion, or processing blocks, provided their input levels and clock requirements match the device. Compared with a discrete crystal oscillator network, an integrated synthesizer can reduce component count and standardize clock generation, but it must still be supported by correct decoupling and controlled board layout. Typical implementation places the clock generator near the loads it serves and connects its supply to a clean 3 V to 5.5 V rail. Short traces help limit added delay and susceptibility to noise. The SOIC package requires adequate spacing from board edges and neighboring components, while the power and ground pins must follow the manufacturer's recommended layout. Load capacitance, fanout, and termination should be checked against downstream requirements. The key design trade-off is specialization. A dedicated 74.25 MHz HDTV clock synthesizer is appropriate when the system requires that reference, but it is not a universal programmable clock solution. Confirm source frequency, output count, supply voltage, logic levels, package, and pinout against the current manufacturer datasheet before layout release. This page distinguishes verified facts from parameters that were not present in the supplied data.

견적 요청 문의하기
MK2716STR - 74.25MHz HDTV Clock Synthesizer | Renesas (Tape & Reel)
MK2716STR

MK2716STR - 74.25MHz HDTV Clock Synthesizer | Renesas (Tape & Reel)

The Renesas Electronics MK2716STR is an HDTV clock synthesizer operating at 74.25 MHz and packaged in an 8-pin SOIC measuring 0.154 inches, or 3.90 mm, in width. Search results identify the device as a clock synthesizer and video IC with PLL-based frequency synthesis for video timing applications. The component is associated with the MK2716 family and is offered in tube packaging according to the supplied distributor records. A clock synthesizer is a timing IC that generates or distributes clock signals required by digital systems. In a PLL-based implementation, a phase-locked loop compares a reference signal with a divided output and adjusts the controlled oscillator until the two signals are synchronized. Clock synthesizers belong to the clock and timing IC hierarchy and support video, communications, and other systems that require stable reference-derived timing. The verified data identifies the MK2716STR as a single PLL clock synthesizer, an HDTV clock synthesizer, and a 74.25 MHz device in an 8-pin SOIC package. These descriptions indicate a specialized timing function rather than a general-purpose oscillator or microcontroller. The exact output configuration, reference frequency, voltage ratings, jitter, pin functions, and operating limits are not present in the supplied verified records and must be confirmed in the manufacturer datasheet before design release. The part is associated with HDTV and video clock-generation requirements. A synthesized clock can provide a controlled timing reference to video-processing chains, display equipment, converters, and related digital video systems. The 74.25 MHz designation is a concrete nominal operating point in the provided distributor record, but the supplied data does not establish tolerance, output count, or configuration details. For PCB design, verify the exposed SOIC footprint, pin assignment, power rails, ground-return requirements, and recommended decoupling directly from the current Renesas datasheet. Do not substitute a generic clock IC solely because its frequency is similar; clock polarity, edge relationships, jitter, supply voltage, and system timing requirements must match. This page consolidates verified distributor descriptions, manufacturer-document references, packaging information, and engineering guidance. It does not infer missing electrical specifications, and unsupported values are marked for data completion rather than guessed.

견적 요청 문의하기
MK2727S - 27MHz PLL Clock Synthesizer | Renesas
MK2727S

MK2727S - 27MHz PLL Clock Synthesizer | Renesas

The Renesas Electronics MK2727S is a 27 MHz PLL clock synthesizer with VCXO functionality, packaged in an 8-SOIC outline measuring 0.154 inch, or 3.90 mm, wide. It is identified by distributor listings as a clock generator, PLL, and frequency synthesizer intended for systems requiring a stable local frequency source. The verified data specifically confirms the device category, nominal 27 MHz frequency, VCXO function, PLL clock synthesizer function, and 8-SOIC package. A PLL clock synthesizer is a clock-and-timing integrated circuit that generates, conditions, or multiplies timing references for digital and RF systems. The MK2727S combines a PLL clock synthesizer with VCXO behavior, placing it within the broader hierarchy of clock management, timing control, and semiconductor signal-processing devices. This type of component is relevant when a system needs frequency flexibility, stable clock distribution, or a local oscillator rather than a fixed passive resonator alone. The principal verified feature set is compact but application-defining: a 27 MHz operating reference, VCXO functionality, PLL clock synthesis, and an 8-SOIC package. The available distributor listings describe the part as suitable for clock-generation requirements and compare inventory across multiple suppliers. The package is small enough for conventional surface-mount PCB assembly while remaining compatible with standard 8-pin SOIC footprint checks. Technically, the MK2727S belongs to the clock-and-timing segment rather than a power-management or signal-amplifier category. Its usefulness depends on the required output frequency, tuning range, phase-noise behavior, supply requirements, reference architecture, and downstream clock tolerances. Those detailed electrical limits are not provided in the verified excerpts and must be checked against the official Renesas MK2727 datasheet before final schematic approval, timing-budget closure, or PCB release. Typical design roles include local clock generation for embedded systems, frequency reference conditioning in communications equipment, timing support in RF systems, and synchronization in test or measurement platforms. The verified Xecor comparison describes the MK2727 family as a frequency source for 2.4 GHz and 5 GHz systems, while the manufacturer datasheet page is the authoritative source for electrical limits and application guidance. The most important design practice is to verify the complete electrical and timing specification set rather than selecting from the distributor headline alone. Designers should confirm reference input type, output arrangement, supply voltage, tuning interface, temperature range, and pin-level truth table in the manufacturer datasheet. This page distinguishes verified facts from unavailable parameters and avoids treating distributor classifications as substitutes for engineering specifications. This product data consolidates verified distributor listings, the official Renesas datasheet link, package information, and application context for engineers evaluating the MK2727S. It is intended to support initial sourcing and design screening, while final qualification remains dependent on the full manufacturer datasheet and application-specific validation.

견적 요청 문의하기
MK2727SLF - 27MHz VCXO/PLL Clock Synthesizer | Renesas
MK2727SLF

MK2727SLF - 27MHz VCXO/PLL Clock Synthesizer | Renesas

Renesas Electronics MK2727SLF is a 27 MHz voltage-controlled crystal oscillator with an integrated phase-locked loop, classified in verified listings as a PLL clock synthesizer, VCXO, or clock generator with one clock circuit. The device accepts a crystal input, produces a CMOS clock output, and is packaged in an 8-pin SOIC measuring 0.154 inch wide and 3.90 mm in width. Its maximum stated frequency is 27 MHz. A VCXO is a crystal oscillator whose output frequency can be adjusted by an external control voltage. Adding a phase-locked loop allows the oscillator frequency to be stabilized against a reference, making this device part of the clock-generation and frequency-synthesis hierarchy. In system terms, the MK2727SLF is a Clock & Timing IC that converts a crystal input into a controlled CMOS output suitable for clocking or frequency-reference functions. The verified part description identifies the MK2727SLF as a low-cost 27 MHz VCXO. It uses a crystal input, provides a CMOS output, and contains one clock circuit. These characteristics make frequency stability and external control central to its selection. The 8-SOIC package also provides a conventional surface-mount footprint, although pin assignments, voltage limits, control sensitivity, and output-drive details must be confirmed directly from the manufacturer datasheet before layout or replacement work. Technically, the MK2727SLF combines a crystal oscillator with PLL-based frequency control. Such an arrangement can reduce long-term frequency variation relative to an uncompensated crystal oscillator by locking the controlled oscillator to a reference. However, loop bandwidth, capture range, tuning voltage, reference requirements, and phase-noise performance are not present in the supplied verified excerpts, so those values should not be inferred from the 27 MHz headline specification. Typical applications for this device include communication modules, industrial control electronics, embedded equipment, and other systems requiring a tunable or PLL-stabilized CMOS clock. The single-circuit architecture is appropriate where one local clock domain is needed. Care is required when multiple clock domains exist because the supplied data confirms only one clock circuit and does not establish independent output-channel behavior. For a robust design, verify the complete pinout, recommended crystal load, bypass-capacitor values, control-voltage range, and output impedance from the eight-page manufacturer datasheet. Confirm loop stability and startup behavior in the target reference configuration. Do not treat the distributor summary as a substitute for the datasheet when selecting crystal parameters or determining PCB land patterns. This product record consolidates the verified 27 MHz VCXO description, PLL and CMOS classifications, 8-SOIC package information, source listings, and engineering guidance. It also distinguishes confirmed characteristics from parameters that still require datasheet-level verification, reducing the risk of selecting or replacing the MK2727SLF from incomplete catalogue information.

견적 요청 문의하기
MK2727SLFTR - 27MHz VCXO/PLL Clock Synthesizer | Renesas (Tape & Reel)
MK2727SLFTR

MK2727SLFTR - 27MHz VCXO/PLL Clock Synthesizer | Renesas (Tape & Reel)

Renesas Electronics MK2727SLFTR is a 27 MHz voltage-controlled crystal oscillator with an integrated phase-locked loop, classified in verified listings as a PLL clock synthesizer, VCXO, or clock generator with one clock circuit. The device accepts a crystal input, produces a CMOS clock output, and is packaged in an 8-pin SOIC measuring 0.154 inch wide and 3.90 mm in width. Its maximum stated frequency is 27 MHz. A VCXO is a crystal oscillator whose output frequency can be adjusted by an external control voltage. Adding a phase-locked loop allows the oscillator frequency to be stabilized against a reference, making this device part of the clock-generation and frequency-synthesis hierarchy. In system terms, the MK2727SLFTR is a Clock & Timing IC that converts a crystal input into a controlled CMOS output suitable for clocking or frequency-reference functions. The verified part description identifies the MK2727SLFTR as a low-cost 27 MHz VCXO. It uses a crystal input, provides a CMOS output, and contains one clock circuit. These characteristics make frequency stability and external control central to its selection. The 8-SOIC package also provides a conventional surface-mount footprint, although pin assignments, voltage limits, control sensitivity, and output-drive details must be confirmed directly from the manufacturer datasheet before layout or replacement work. Technically, the MK2727SLFTR combines a crystal oscillator with PLL-based frequency control. Such an arrangement can reduce long-term frequency variation relative to an uncompensated crystal oscillator by locking the controlled oscillator to a reference. However, loop bandwidth, capture range, tuning voltage, reference requirements, and phase-noise performance are not present in the supplied verified excerpts, so those values should not be inferred from the 27 MHz headline specification. Typical applications for this device include communication modules, industrial control electronics, embedded equipment, and other systems requiring a tunable or PLL-stabilized CMOS clock. The single-circuit architecture is appropriate where one local clock domain is needed. Care is required when multiple clock domains exist because the supplied data confirms only one clock circuit and does not establish independent output-channel behavior. For a robust design, verify the complete pinout, recommended crystal load, bypass-capacitor values, control-voltage range, and output impedance from the eight-page manufacturer datasheet. Confirm loop stability and startup behavior in the target reference configuration. Do not treat the distributor summary as a substitute for the datasheet when selecting crystal parameters or determining PCB land patterns. This product record consolidates the verified 27 MHz VCXO description, PLL and CMOS classifications, 8-SOIC package information, source listings, and engineering guidance. It also distinguishes confirmed characteristics from parameters that still require datasheet-level verification, reducing the risk of selecting or replacing the MK2727SLFTR from incomplete catalogue information.

견적 요청 문의하기
MK2727STR - 27MHz PLL Clock Synthesizer | Renesas (Tape & Reel)
MK2727STR

MK2727STR - 27MHz PLL Clock Synthesizer | Renesas (Tape & Reel)

The Renesas Electronics MK2727STR is a 27 MHz PLL clock synthesizer with VCXO functionality, packaged in an 8-SOIC outline measuring 0.154 inch, or 3.90 mm, wide. It is identified by distributor listings as a clock generator, PLL, and frequency synthesizer intended for systems requiring a stable local frequency source. The verified data specifically confirms the device category, nominal 27 MHz frequency, VCXO function, PLL clock synthesizer function, and 8-SOIC package. A PLL clock synthesizer is a clock-and-timing integrated circuit that generates, conditions, or multiplies timing references for digital and RF systems. The MK2727STR combines a PLL clock synthesizer with VCXO behavior, placing it within the broader hierarchy of clock management, timing control, and semiconductor signal-processing devices. This type of component is relevant when a system needs frequency flexibility, stable clock distribution, or a local oscillator rather than a fixed passive resonator alone. The principal verified feature set is compact but application-defining: a 27 MHz operating reference, VCXO functionality, PLL clock synthesis, and an 8-SOIC package. The available distributor listings describe the part as suitable for clock-generation requirements and compare inventory across multiple suppliers. The package is small enough for conventional surface-mount PCB assembly while remaining compatible with standard 8-pin SOIC footprint checks. Technically, the MK2727STR belongs to the clock-and-timing segment rather than a power-management or signal-amplifier category. Its usefulness depends on the required output frequency, tuning range, phase-noise behavior, supply requirements, reference architecture, and downstream clock tolerances. Those detailed electrical limits are not provided in the verified excerpts and must be checked against the official Renesas MK2727 datasheet before final schematic approval, timing-budget closure, or PCB release. Typical design roles include local clock generation for embedded systems, frequency reference conditioning in communications equipment, timing support in RF systems, and synchronization in test or measurement platforms. The verified Xecor comparison describes the MK2727 family as a frequency source for 2.4 GHz and 5 GHz systems, while the manufacturer datasheet page is the authoritative source for electrical limits and application guidance. The most important design practice is to verify the complete electrical and timing specification set rather than selecting from the distributor headline alone. Designers should confirm reference input type, output arrangement, supply voltage, tuning interface, temperature range, and pin-level truth table in the manufacturer datasheet. This page distinguishes verified facts from unavailable parameters and avoids treating distributor classifications as substitutes for engineering specifications. This product data consolidates verified distributor listings, the official Renesas datasheet link, package information, and application context for engineers evaluating the MK2727STR. It is intended to support initial sourcing and design screening, while final qualification remains dependent on the full manufacturer datasheet and application-specific validation.

견적 요청 문의하기
MK2732-06G - 54 MHz PLL Clock Synthesizer | Renesas
MK2732-06G

MK2732-06G - 54 MHz PLL Clock Synthesizer | Renesas

Renesas MK2732-06G is a low-cost, low-jitter VCXO and PLL clock synthesizer with a maximum frequency of 54 MHz, crystal input, CMOS output, and a 16-pin TSSOP package rated at 0.173 inch, or 4.40 mm, width. The device combines a voltage-controlled crystal oscillator, PLL, and multiplier functions in one package. A VCXO, or voltage-controlled crystal oscillator, is a crystal-based frequency source whose output frequency can be adjusted with an external control voltage. A phase-locked loop, commonly abbreviated as PLL, is a feedback control system that synchronizes an oscillator to a reference frequency and multiplies that frequency. The MK2732-06G therefore sits within the clock and timing IC hierarchy as a programmable clock generator, frequency synthesizer, and VCXO timing device. The MK2732-06G accepts a crystal input and provides a CMOS clock output. Its maximum operating frequency is 54 MHz, and it contains one clock circuit with an input-to-output ratio of 1:3. The on-chip VCXO accepts a tuning voltage from 0 V to 3 V, allowing the output clock to vary by plus or minus 100 ppm. The documented pull range is 200 ppm from the minimum tuning voltage of 0 V to the maximum of 3 V. The device includes PLL bypass capability and is intended to replace combinations of discrete VCXOs and frequency multipliers. This integration can reduce the number of separate clock components required in a design while preserving an adjustable output. The specified use cases include xDSL chipsets and MPEG-2 decoders, where deterministic local clock generation can support data conversion and multimedia processing systems. Typical applications include xDSL chipset clocking, MPEG-2 decoder timing, communication equipment, and other systems requiring a crystal-referenced CMOS clock with voltage-controlled frequency adjustment. The 16-pin TSSOP package supports surface-mount assembly and is compatible with compact PCB layouts. Its 4.40 mm body width places it in the TSSOP-16 surface-mount package family. Designers should treat crystal selection, VCXO control-voltage filtering, and output-clock jitter as an integrated design task. Decoupling, grounding, and short clock traces remain important because switching noise at the reference input can degrade clock quality. The manufacturer datasheet should be consulted for the complete pin assignment, recommended crystal circuit, electrical limits, and timing characteristics before layout is released. This product record combines the verified Renesas and distributor descriptions with engineering guidance covering the VCXO, PLL, 54 MHz maximum frequency, 3 V tuning range, 200 ppm pull range, CMOS interface, and 16-TSSOP package. It also distinguishes verified device facts from values that require confirmation from the manufacturer datasheet.

견적 요청 문의하기
MK2732-06GLF - 5V VCXO-PLL Clock Synthesizer | Renesas
MK2732-06GLF

MK2732-06GLF - 5V VCXO-PLL Clock Synthesizer | Renesas

Renesas Electronics MK2732-06GLF is a low-cost, low-jitter clock synthesizer combining a voltage-controlled crystal oscillator, phase-locked loop, and clock-multiplier functions in a lead-free 16-pin TSSOP package. It operates from a 4.75 V to 5.25 V supply and uses CMOS-compatible clock interfaces. The integrated VCXO accepts a 0 V to 3 V control voltage, allowing its output frequency to vary by up to ±100 ppm for clock adjustment in communications, test, and signal-processing systems. A clock synthesizer is a timing IC that derives one or more stable output clocks from a reference source. A VCXO provides voltage-controlled frequency adjustment, while a PLL multiplies and cleans up the reference frequency. The MK2732-06GLF therefore occupies the clock and timing hierarchy between a crystal reference and the digital clock inputs of processors, converters, transceivers, and test equipment. Renesas describes the device as a low-cost, low-jitter, high-performance alternative to separate VCXO and frequency-multiplier assemblies. Its principal benefits are integration, reduced component count, adjustable output frequency, and low phase noise. The on-chip control range supports fine tuning when compensation is required for crystal tolerance, temperature drift, propagation delay, or synchronization between independently clocked subsystems. The device combines a VCXO with PLL synthesis to provide multiple clock outputs from a common reference arrangement. CMOS-compatible signaling supports integration into digital logic, while the integrated architecture avoids the component count and interconnect complexity of a discrete oscillator followed by a separate multiplier. The exact output frequency, divider ratios, output configurations, and jitter limits depend on the selected crystal, programming method, and operating configuration documented for the MK2732-06 family. Typical uses include clock recovery, communication timing, frequency conversion, instrumentation, and low-cost oscillator replacement. The part can also serve wherever a reference crystal must be converted into one or more digital clock domains with controlled phase noise. Systems requiring a variable frequency can apply an external control voltage to the VCXO input and use the synthesized output as the system timing reference. Designers should verify the crystal frequency, loop filter or programming requirements, output enable behavior, and all supply and ground connections in the manufacturer datasheet before layout release. Decoupling should be placed close to the supply pins, while the oscillator and feedback paths should remain compact and isolated from high-current switching nodes. Because the clock output edge can carry reference noise, leave adequate isolation around sensitive timing paths. This product page combines manufacturer and distributor information with package-specific identification, application guidance, design considerations, and a conservative replacement assessment. It emphasizes engineering suitability rather than assuming that a related suffix is automatically pin-compatible, and it directs buyers to XAIPART's Request a Quote form for current commercial terms.

견적 요청 문의하기
MK2732-06GTR - 54 MHz PLL Clock Synthesizer | Renesas (Tape & Reel)
MK2732-06GTR

MK2732-06GTR - 54 MHz PLL Clock Synthesizer | Renesas (Tape & Reel)

Renesas MK2732-06GTR is a low-cost, low-jitter VCXO and PLL clock synthesizer with a maximum frequency of 54 MHz, crystal input, CMOS output, and a 16-pin TSSOP package rated at 0.173 inch, or 4.40 mm, width. The device combines a voltage-controlled crystal oscillator, PLL, and multiplier functions in one package. A VCXO, or voltage-controlled crystal oscillator, is a crystal-based frequency source whose output frequency can be adjusted with an external control voltage. A phase-locked loop, commonly abbreviated as PLL, is a feedback control system that synchronizes an oscillator to a reference frequency and multiplies that frequency. The MK2732-06GTR therefore sits within the clock and timing IC hierarchy as a programmable clock generator, frequency synthesizer, and VCXO timing device. The MK2732-06GTR accepts a crystal input and provides a CMOS clock output. Its maximum operating frequency is 54 MHz, and it contains one clock circuit with an input-to-output ratio of 1:3. The on-chip VCXO accepts a tuning voltage from 0 V to 3 V, allowing the output clock to vary by plus or minus 100 ppm. The documented pull range is 200 ppm from the minimum tuning voltage of 0 V to the maximum of 3 V. The device includes PLL bypass capability and is intended to replace combinations of discrete VCXOs and frequency multipliers. This integration can reduce the number of separate clock components required in a design while preserving an adjustable output. The specified use cases include xDSL chipsets and MPEG-2 decoders, where deterministic local clock generation can support data conversion and multimedia processing systems. Typical applications include xDSL chipset clocking, MPEG-2 decoder timing, communication equipment, and other systems requiring a crystal-referenced CMOS clock with voltage-controlled frequency adjustment. The 16-pin TSSOP package supports surface-mount assembly and is compatible with compact PCB layouts. Its 4.40 mm body width places it in the TSSOP-16 surface-mount package family. Designers should treat crystal selection, VCXO control-voltage filtering, and output-clock jitter as an integrated design task. Decoupling, grounding, and short clock traces remain important because switching noise at the reference input can degrade clock quality. The manufacturer datasheet should be consulted for the complete pin assignment, recommended crystal circuit, electrical limits, and timing characteristics before layout is released. This product record combines the verified Renesas and distributor descriptions with engineering guidance covering the VCXO, PLL, 54 MHz maximum frequency, 3 V tuning range, 200 ppm pull range, CMOS interface, and 16-TSSOP package. It also distinguishes verified device facts from values that require confirmation from the manufacturer datasheet.

견적 요청 문의하기
MK2745-21S - 80MHz DVD/MPEG Clock Synthesizer | Renesas
MK2745-21S

MK2745-21S - 80MHz DVD/MPEG Clock Synthesizer | Renesas

The Renesas Electronics MK2745-21S is a low-cost, low-jitter clock/frequency synthesizer IC with a maximum output frequency of 80 MHz, packaged in a 16-pin SOIC. It uses an analog phase-locked loop to generate multiple audio output clocks, a processor clock, a divided processor clock, a 27 MHz clock, and additional timing signals for DVD and other MPEG-2-based systems. The device accepts a 27 MHz fundamental-mode crystal or clock input and supports clock or crystal sources with CMOS outputs. A clock synthesizer is a timing-control IC that uses a phase-locked loop to establish an output clock from a stable reference. In the electronics hierarchy, the MK2745-21S is a clock/frequency synthesizer, a clock-and-timing IC, and a power-management-adjacent system-timing component. Its purpose is to distribute related clock signals accurately within a multimedia or consumer-electronics system, reducing the number of separate oscillators and clock-generation circuits required on the printed circuit board. Key features include an 80 MHz maximum output frequency, an analog PLL architecture, CMOS output logic, and support for either a crystal or external clock input. The 27 MHz reference arrangement is particularly relevant to DVD and MPEG-2 equipment, where several audio and processor-related clocks must share a common reference. According to the Renesas manufacturer datasheet, the device is positioned as a low-cost, low-jitter, high-performance clock synthesizer for these applications. Technically, the analog PLL multiplies or divides the reference frequency to develop the required output-clock relationships. Because the reference source and generated outputs are phase-related, the part is intended to provide coherent timing across multiple audio and processor domains. The available specifications identify one PLL circuit, clock or crystal input, and a maximum frequency of 80 MHz. Detailed jitter, output-accuracy, voltage, and temperature limits are not available in the supplied verification excerpts and should be confirmed in the manufacturer datasheet before precision-timing design sign-off. Typical applications include DVD players, MPEG-2-based multimedia systems, set-top equipment, audio processing platforms, and other embedded products requiring a 27 MHz reference and derived clocks. In these systems, the MK2745-21S can replace separate oscillator and divider arrangements where its supported output set and electrical limits satisfy the design. The benefit is centralized clock management, while the tradeoff is dependence on correct reference configuration, output-enable sequencing, board-level return paths, and stable supply voltage. The primary design consideration is to verify every generated frequency and logic level against the exact system timing tree. Layout should provide a short, clean 27 MHz reference path, a controlled crystal or clock source, and low-impedance ground connections. Decoupling and unused-pin handling must follow the manufacturer datasheet, because incorrect implementation can add reference noise or create unintended clock activity even when the nominal output frequencies are correct. This page consolidates the verified manufacturer and distributor information, documents missing electrical details without guessing, compares the available same-family Renesas option, and provides application-specific design guidance. It is intended to support component identification, sourcing, and preliminary engineering evaluation while clearly separating confirmed specifications from parameters that still require datasheet review.

견적 요청 문의하기
MK2745-21SLF 80MHz DVD/MPEG Clock Source | Renesas
MK2745-21SLF

MK2745-21SLF 80MHz DVD/MPEG Clock Source | Renesas

Renesas Electronics MK2745-21SLF is an 80 MHz maximum-output clock synthesizer and frequency synthesizer designed for DVD players, MPEG 2 equipment, and related multimedia systems. It uses analog phase-locked loop technology, accepts a 27 MHz fundamental-mode crystal or clock input, and operates from a 3 V to 5.5 V supply in a 16-pin SOIC surface-mount package. A clock synthesizer is a timing IC that derives one or more stable digital clock signals from a common reference. It belongs to the clock and timing hierarchy that includes clock generators, phase-locked loops, clock buffers, and clock dividers. The MK2745-21SLF consolidates reference conditioning, multiplication, division, and clock distribution into a device intended to simplify the timing architecture of DVD and MPEG 2 systems. The device generates multiple audio output clocks, a processor clock, the processor clock divided by two, and fixed 27 MHz and 24 MHz-related outputs. Its maximum output frequency is 80 MHz, while its 27 MHz reference input supports integration with common DVD source-clock architectures. The 3 V to 5.5 V supply range allows operation from nominal 3.3 V and 5 V system rails, subject to the detailed operating limits in the manufacturer datasheet. Its internal analog PLL multiplies or conditions the reference frequency to generate the required output clocks. Maintaining a single reference improves system timing coordination compared with independent oscillators, while the divided processor output supports systems that require related clocks at different rates. Exact output-drive, jitter, phase, and stability characteristics should be taken from the Renesas datasheet rather than inferred from the basic clock-function description. Typical uses include DVD and MPEG 2 player mainboards, optical-disc playback systems, set-top equipment, and multimedia processors requiring coordinated audio and processor clocks. It is also appropriate for legacy equipment repairs where replacing a surface-mount clock-source IC without altering the existing board layout is important. For a new design, verify every required output frequency, supported reference mode, voltage rail, load, and package footprint before committing the 16-pin SOIC footprint. Crystal selection and PLL loop components are timing-critical, so use the reference values and layout guidance in the manufacturer datasheet. Decoupling should be placed close to the supply pins, and unused outputs should be handled according to the device's output-drive and no-connect guidance. This product page combines the Renesas device description with package information, verified sourcing links, engineering-oriented application guidance, and a parameter-by-parameter replacement comparison. It is intended to help engineers identify the correct clock-source function, assess board compatibility, and plan a qualified replacement or repair before layout changes are made.

견적 요청 문의하기
MK2745-21STR - 80MHz DVD/MPEG Clock Synthesizer | Renesas (Tape & Reel)
MK2745-21STR

MK2745-21STR - 80MHz DVD/MPEG Clock Synthesizer | Renesas (Tape & Reel)

The Renesas Electronics MK2745-21STR is a low-cost, low-jitter clock/frequency synthesizer IC with a maximum output frequency of 80 MHz, packaged in a 16-pin SOIC. It uses an analog phase-locked loop to generate multiple audio output clocks, a processor clock, a divided processor clock, a 27 MHz clock, and additional timing signals for DVD and other MPEG-2-based systems. The device accepts a 27 MHz fundamental-mode crystal or clock input and supports clock or crystal sources with CMOS outputs. A clock synthesizer is a timing-control IC that uses a phase-locked loop to establish an output clock from a stable reference. In the electronics hierarchy, the MK2745-21STR is a clock/frequency synthesizer, a clock-and-timing IC, and a power-management-adjacent system-timing component. Its purpose is to distribute related clock signals accurately within a multimedia or consumer-electronics system, reducing the number of separate oscillators and clock-generation circuits required on the printed circuit board. Key features include an 80 MHz maximum output frequency, an analog PLL architecture, CMOS output logic, and support for either a crystal or external clock input. The 27 MHz reference arrangement is particularly relevant to DVD and MPEG-2 equipment, where several audio and processor-related clocks must share a common reference. According to the Renesas manufacturer datasheet, the device is positioned as a low-cost, low-jitter, high-performance clock synthesizer for these applications. Technically, the analog PLL multiplies or divides the reference frequency to develop the required output-clock relationships. Because the reference source and generated outputs are phase-related, the part is intended to provide coherent timing across multiple audio and processor domains. The available specifications identify one PLL circuit, clock or crystal input, and a maximum frequency of 80 MHz. Detailed jitter, output-accuracy, voltage, and temperature limits are not available in the supplied verification excerpts and should be confirmed in the manufacturer datasheet before precision-timing design sign-off. Typical applications include DVD players, MPEG-2-based multimedia systems, set-top equipment, audio processing platforms, and other embedded products requiring a 27 MHz reference and derived clocks. In these systems, the MK2745-21STR can replace separate oscillator and divider arrangements where its supported output set and electrical limits satisfy the design. The benefit is centralized clock management, while the tradeoff is dependence on correct reference configuration, output-enable sequencing, board-level return paths, and stable supply voltage. The primary design consideration is to verify every generated frequency and logic level against the exact system timing tree. Layout should provide a short, clean 27 MHz reference path, a controlled crystal or clock source, and low-impedance ground connections. Decoupling and unused-pin handling must follow the manufacturer datasheet, because incorrect implementation can add reference noise or create unintended clock activity even when the nominal output frequencies are correct. This page consolidates the verified manufacturer and distributor information, documents missing electrical details without guessing, compares the available same-family Renesas option, and provides application-specific design guidance. It is intended to support component identification, sourcing, and preliminary engineering evaluation while clearly separating confirmed specifications from parameters that still require datasheet review.

견적 요청 문의하기
MK2745-24S - 160 MHz DVD/MPEG Clock Synthesizer | Renesas
MK2745-24S

MK2745-24S - 160 MHz DVD/MPEG Clock Synthesizer | Renesas

The Renesas MK2745-24S is a low-cost, low-jitter clock synthesizer with PLL bypass for DVD and other MPEG-2-based equipment. It accepts a 27 MHz fundamental-mode crystal or clock input, uses analog phase-locked-loop techniques, and generates multiple audio output clocks, a processor clock, and two 27 MHz clocks. The device produces CMOS outputs, contains one clock-synthesis circuit, supports a maximum frequency of 160 MHz, and provides a maximum input-to-output ratio of 1:8. A clock synthesizer is a timing IC that derives one or more internally related clock signals from a common reference. Clock generators, phase-locked loops, and frequency synthesizers form the broader clock and timing IC category. By coordinating audio, processor, and reference clocks in one device, the MK2745-24S reduces the number of separate oscillators required by DVD, MPEG-2, set-top, and related multimedia systems. Its bypass mode provides a direct clock path when PLL operation is not required. Key features include a 27 MHz crystal or clock input, CMOS output technology, analog PLL operation with bypass, a maximum output frequency of 160 MHz, and an input-to-output ratio reaching 1:8. These characteristics suit designs that require multiple related clock domains while limiting board area. The single-circuit architecture is appropriate for centralized system timing rather than applications requiring numerous independent programmable outputs. The device is intended for DVD and MPEG-2-based multimedia platforms where processor timing, audio clocks, and 27 MHz reference clocks must remain related. Its architecture can reduce clock-generation complexity by sharing a common reference across multiple outputs. Engineers should still evaluate each output's frequency, jitter, drive level, and operating condition against the complete system timing budget before releasing a production design. Typical uses include DVD player clock trees, MPEG-2 set-top boxes, digital audio systems, processor clock generation, and multimedia equipment requiring 27 MHz references alongside derived audio or processor clocks. It may also be evaluated for legacy industrial and embedded video systems that use a 27 MHz source and CMOS-compatible clock inputs. The primary design consideration is that the verified source excerpt does not identify the exact package, pin count, supply voltage, or complete output-frequency mapping. Those details must be confirmed in the Renesas MK2745-24 datasheet before schematic capture or PCB layout. The suffix and programming or packaging options should not be assumed equivalent unless the manufacturer data explicitly confirms them. This page combines verified manufacturer and distributor information, pricing placeholders, drop-in-replacement verification status, and practical selection guidance. Unlike a raw distributor listing, it also identifies missing package and pinout data, distinguishes confirmed functions from unverified specifications, and explains where engineers must perform final datasheet validation.

견적 요청 문의하기