집적 회로

하위 카테고리

📁 ADC/DAC 3,100+ 제품 📁 증폭기 IC 1,900+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 660+ 제품 📁 Comparator ICs 1 제품 📁 DSP 1,100+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 7,300+ 제품 📁 인터페이스 IC 3,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 460+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 20,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 14 제품

제품 (39,000+)

OPA404KU - Quad 6.4MHz Precision Difet Op-Amp | Texas Instruments
OPA404KU

OPA404KU - Quad 6.4MHz Precision Difet Op-Amp | Texas Instruments

The Texas Instruments OPA404KU is a quad high-speed precision Difet (dielectrically-isolated FET) operational amplifier delivering 6.4 MHz bandwidth, 35 V/us slew rate, and a maximum input offset voltage of +/-750 uV, housed in a 16-pin SOIC package with the industry-standard quad op-amp pinout. A Difet operational amplifier is a precision op-amp built on dielectrically isolated FET process technology. Within the signal-chain hierarchy, the OPA404 belongs to the class of precision amplifiers: operational amplifier -> precision op-amp -> high-speed precision amplifier -> analog front-end IC. Unlike JFET-input op-amps fabricated on standard junction-isolated processes, Difet technology couples extremely low input bias current with wideband dynamics, a combination historically difficult to achieve in a single monolithic device. Key differentiating specifications include the 6.4 MHz wide bandwidth, 35 V/us high slew rate, +/-750 uV maximum offset voltage, +/-4 pA maximum input bias current, and 0.01% low settling time. This combination makes the device suitable when engineers need FET-input precision without sacrificing the speed of general-purpose high-speed amplifiers. Supply operation spans +/-5V to +/-18V (10 V to 36 V total), covering most analog instrumentation rails. Architecturally, the dielectrically isolated FET inputs contribute picoampere-level bias currents, which preserve accuracy when the amplifier is driven from high-impedance sources such as photodiodes, piezoelectric sensors, and high-value resistor networks. The standard quad pinout allows designers to drop the part into existing quad op-amp layouts originally designed around devices like the TL074 or TLC274, upgrading precision without PCB redesign. Typical applications include data acquisition front ends, precision integrators and active filters, photodiode transimpedance amplifiers, test and measurement instrumentation, and multi-channel audio or industrial signal processing where four matched channels in one package save board area and improve channel-to-channel matching. Design considerations: because input bias current is only a few picoamperes, use guard rings and clean board layout to prevent leakage paths from dominating the input error budget. Verify stability with capacitive loads and set gain appropriately for the 6.4 MHz bandwidth. This page synthesizes distributor pricing, verified alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet, providing a one-stop engineering reference for the OPA404KU.

견적 요청 문의하기
OPA404KU/1K - Quad 6.4MHz Precision Difet Op Amp | TI
OPA404KU/1K

OPA404KU/1K - Quad 6.4MHz Precision Difet Op Amp | TI

The Texas Instruments OPA404KU/1K is a quad high-speed precision Difet (dielectrically-isolated FET) operational amplifier delivering 6.4 MHz bandwidth, 35 V/us slew rate, and +/-750 uV maximum offset voltage in a 16-pin SOIC (DW) package rated 0C to +70C. A precision operational amplifier is a differential-input, high-gain voltage amplifier built around a FET or bipolar input stage that minimizes DC error terms such as offset voltage and input bias current. Within the signal-chain hierarchy, op amps sit between sensors/ADCs and the wider analog front end, making their DC accuracy and dynamic performance critical to overall system precision. The Difet process uses dielectric isolation of the input FETs, which reduces input bias current far below what junction-isolated JFET processes achieve. Key features include an unusually low maximum input bias current of +/-4 pA, 0.01% settling to fast accuracy levels, unity-gain stability, and a standard quad op amp pinout that allows direct upgrading of existing designs. The combination of low bias current with wide bandwidth and fast slew rate in a single quad package is rare and eliminates matching multiple singles. Technically, the dielectrically isolated FET input stage keeps bias current low over temperature and input range, while the internal compensation guarantees stability down to unity gain without external capacitors. The standard quad pin configuration (outputs on pins 1, 7, 8, 14) preserves compatibility with legacy quad sockets. Typical applications include precision instrumentation, optoelectronics, sonar and ultrasound front ends, professional audio equipment, medical equipment, and detector arrays. Design consideration: as a quad device, ensure each amplifier channel has proper supply decoupling, and account for the 0C to +70C commercial operating range - the industrial-range variant OPA404KU/1KE4-grade equivalents should be evaluated for extended temperature designs. This page synthesizes distributor pricing, verified drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
OPA404SG - Quad 6.4MHz Precision Difet Op Amp | Texas Instruments
OPA404SG

OPA404SG - Quad 6.4MHz Precision Difet Op Amp | Texas Instruments

The Texas Instruments OPA404SG is a quad high-speed precision Difet (dielectrically isolated FET) operational amplifier delivering 6.4 MHz bandwidth, 35 V/us slew rate, and a maximum input offset voltage of +/-750 uV in a 14-pin CDIP (ceramic dual-in-line) package. An operational amplifier is a high-gain differential voltage amplifier that forms the foundational building block of the analog signal chain, sitting within the broader hierarchy of linear amplifiers and amplifier ICs in power management and signal conditioning systems. Quad op amps integrate four independent amplifier channels on a single die, sharing supply pins while keeping inputs and outputs independent, which reduces board area and improves channel-to-channel matching in multi-channel analog designs. Key features of the OPA404 include a wide 6.4 MHz bandwidth, a fast 35 V/us slew rate, low input bias current of +/-4 pA max enabled by the Difet input cascode architecture, 0.01% settling to fast accuracy, and a standard quad op amp pin configuration that allows direct upgrading of existing designs. The Difet (dielectrically isolated FET) process eliminates the junction-isolation leakage and parasitic capacitance of conventional processes, combining precision input specifications with uncompromised high-speed performance. The input cascode design keeps the drain-source voltage of the input FETs constant, stabilizing input bias current over temperature and common-mode range while preserving bandwidth. The SG suffix denotes the military-grade temperature rating in a hermetic ceramic package, supporting extended-temperature operation where plastic packaging is unacceptable, such as defense and aerospace instrumentation. Typical applications include high-speed data acquisition front ends, active filters in test and measurement equipment, precision integrators, photodiode transimpedance amplifiers, and multichannel buffer stages in industrial instrumentation. The quad configuration is particularly efficient in filter topologies such as state-variable designs that require four amplifiers per channel set. Design consideration: although the 4 pA bias current permits very large feedback resistors, resistor values above approximately 10 megaohm should be evaluated against parasitic capacitance effects on stability; use short feedback traces and consider a small feedback capacitor. This page synthesizes distributor availability, drop-in alternative analysis, and practical design guidance beyond what the manufacturer datasheet provides.

견적 요청 문의하기
OPA4140 - Quad 11MHz Low-Noise JFET Precision Op Amp | Texas Instruments
OPA4140

OPA4140 - Quad 11MHz Low-Noise JFET Precision Op Amp | Texas Instruments

The Texas Instruments OPA4140 is a quad-channel, 11-MHz, low-noise, high-precision JFET-input operational amplifier with rail-to-rail output swing, available in 14-pin SOIC and 14-pin TSSOP packages. It delivers 5.1 nV/√Hz input voltage noise density, 11 MHz gain-bandwidth product, and 20 V/µs slew rate while operating from a single supply of 4.5 V to 36 V or dual supplies of ±2.25 V to ±18 V. The JFET input stage provides 0.5 pA typical input bias current and ±1.5 µV/°C low offset drift, making it suitable for high-impedance sensor front-ends. An operational amplifier (op amp) is an active analog building block that amplifies the difference between two input voltages and drives the result through an output stage. The op-amp hierarchy sits within analog ICs, then linear ICs, then signal-conditioning and power-management ICs. JFET-input op amps form a sub-family that uses a junction field-effect transistor at the differential input pair, giving extremely low input bias current and high input impedance - critical for photodiode, pH-electrode, and high-impedance transducer front-ends that bipolar input stages cannot load correctly. Key features include 0.5 pA input bias current, 0.5 mV maximum input offset voltage (A-grade), unity-gain stability, output swing to within 50 mV of either rail at 10 kΩ load, and short-circuit protection (rated ±18 mA). The device operates across -40 °C to +125 °C and is unity-gain stable for purely resistive or moderate-capacitive loads, eliminating the need for external compensation. Architecturally, the OPA4140 combines a JFET input differential pair with a bipolar second stage and a rail-to-rail class AB output stage. This hybrid topology achieves the low bias current of JFET, the low noise and precision of bipolar, and the wide output swing that lets a single 5 V rail power ADC drivers and reference buffers without external level shifters. Typical applications include precision analog front-ends (weigh scales, strain gauges, temperature loggers), battery-powered instrumentation, photodiode transimpedance amplifiers, and active filters or integrators in test equipment. Designers choose the OPA4140 over bipolar alternatives when the source impedance exceeds 10 kΩ. When routing the PCB, place 0.1 µF ceramic bypass capacitors within 5 mm of each supply pin and keep input traces short to preserve the 5.1 nV/√Hz noise floor. Use a ground plane under the package to shield inputs from digital noise, and respect the input common-mode range that extends to the negative rail. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that complement the manufacturer datasheet.

견적 요청 문의하기
OPA4140AID - Quad 11MHz 36V JFET Op Amp | Texas Instruments
OPA4140AID

OPA4140AID - Quad 11MHz 36V JFET Op Amp | Texas Instruments

The Texas Instruments OPA4140AID is a quad-channel, 11-MHz, low-noise, 36-V JFET precision operational amplifier with rail-to-rail output, housed in a 14-pin SOIC (D) package. It features 5.1 nV/√Hz input voltage noise density, 1 pA typical input bias current (JFET input stage), 20 V/µs slew rate, and operates from ±2.25 V to ±18 V dual supplies or 4.5 V to 36 V single supply. A JFET input operational amplifier is a precision analog building block that uses a junction field-effect transistor at its input stage instead of a bipolar transistor. This architecture delivers very low input bias current (picoampere range) and high input impedance, which is critical when amplifying signals from high-impedance sensors, photodiodes, or transducer bridges without loading the source. The OPAx140 family (single, dual, quad) extends this JFET topology into a low-power, low-noise, rail-to-rail-output design suited for modern single-supply precision instrumentation. Key differentiating features include 5.1 nV/√Hz voltage noise density, 11 MHz gain-bandwidth product, 20 V/µs slew rate, ±18 V (36 V) supply operation, true rail-to-rail output swing, low 1.8 mA per-channel quiescent current, and excellent DC precision with 5 µV typical offset voltage. The JFET input stage eliminates the high input bias currents seen in bipolar amplifiers, making the OPA4140 ideal for high-impedance sensor signal chains. Technically, the OPA4140 uses TI's proprietary JFET-input dielectrically-isolated process combined with a precision laser-trimmed input stage. The architecture provides unity-gain stability, integrated EMI/RFI rejection filtering, and shutdown-free always-on operation. Each channel draws a low 1.8 mA quiescent current, enabling multi-channel precision designs without thermal concerns in compact 14-SOIC layouts. Typical applications include precision instrumentation amplifiers, multi-channel data acquisition systems, medical and analytical instrumentation, high-impedance transducer front-ends, professional audio line drivers, active filters, and precision ATE reference buffers. The four channels in one package support dense PCB layouts for multi-sensor or multi-axis measurement systems. When designing with this device, route input traces as guarded differential pairs and use a solid ground plane to preserve the JFET input's high-impedance advantage. Add 100 nF ceramic bypass capacitors close to each supply pin to maintain PSRR and prevent oscillation under capacitive loads above 1 nF. This page synthesizes distributor pricing, drop-in quad-channel alternatives, and practical design notes for the OPA4140AID that are not collated in the manufacturer datasheet alone.

견적 요청 문의하기
OPA4140AIPW - Quad 11MHz JFET Precision Op Amp | Texas Instruments
OPA4140AIPW

OPA4140AIPW - Quad 11MHz JFET Precision Op Amp | Texas Instruments

The Texas Instruments OPA4140AIPW is a quad-channel, 11-MHz, low-noise, 36-V JFET-input precision operational amplifier with rail-to-rail output, packaged in a 14-pin TSSOP (PW) bulk format. The OPAx140 family features 5.1 nV/√Hz voltage noise density, 1 µV/°C maximum offset drift, 120 µV maximum input offset voltage, and 10 pA maximum input bias current over the full operating temperature range. With a 20 V/µs slew rate and 11 MHz gain-bandwidth product, the device delivers high-speed precision for demanding signal-chain applications. A JFET-input operational amplifier is a class of analog amplifier that uses junction field-effect transistors at the input stage to deliver very high input impedance (giga-ohm range) and exceptionally low input bias current. JFET op amps sit within the broader hierarchy of operational amplifiers -> linear amplifiers -> analog ICs -> semiconductor devices. Compared to bipolar-input op amps, JFET inputs avoid the picoamp-to-nanoamp bias currents of BJT inputs and excel in high-impedance sensor interfaces, transimpedance amplifiers, and precision integrators. Key features include rail-to-rail swing that allows designers to maximize dynamic range on low-voltage single supplies (down to 4.5 V), an input common-mode range that includes the negative supply (V-), and a quiescent current of approximately 1.8 mA per channel. The combination of 5.1 nV/√Hz noise and 1 µV/°C drift positions this part as a premium choice for instrumentation where temperature stability and source-impedance robustness matter. Typical applications include precision analog front-ends for industrial sensors, audio preamplifiers and DAC output buffers, photodiode transimpedance stages, medical instrumentation signal conditioning, and active filters in test-and-measurement equipment. The 36-V absolute-maximum supply also permits ±18 V dual-rail designs in professional audio and industrial process control. When designing with the OPA4140AIPW, choose feedback resistors between 2 kΩ and 100 kΩ to minimize Johnson noise contribution and bias-current offset error. Use 0.1 µF ceramic bypass capacitors within 5 mm of each supply pin to suppress oscillation in high-gain configurations. This page synthesizes verified distributor pricing, drop-in same-package and cross-brand alternatives, and practical design guidance not available from any single distributor listing or datasheet abstract.

견적 요청 문의하기
OPA4192IPW - 36V Quad Precision RRIO Op Amp | Texas Instruments
OPA4192IPW

OPA4192IPW - 36V Quad Precision RRIO Op Amp | Texas Instruments

The Texas Instruments OPA4192IPW is a 36V, low-noise, low-quiescent-current, rail-to-rail input/output (RRIO) precision operational amplifier with e-trim technology, supplied in a 14-pin TSSOP (PW) package. It belongs to the OPAx192 family (OPA192 single, OPA2192 dual, OPA4192 quad) and delivers 10 MHz unity-gain bandwidth, 20 V/µs slew rate, and ±5 µV typical input offset voltage in a quad-channel configuration. The device operates from 8V (4.5V single-supply equivalent) to 36V (single supply) or ±4V to ±18V (dual supplies). An operational amplifier (op amp) is a high-gain DC-coupled electronic voltage amplifier with differential inputs and a single-ended output that uses external feedback components to set transfer characteristics. Precision op amps form a sub-category optimized for low offset, low drift, low bias current, and low noise, and they sit within the broader hierarchy: operational amplifier -> analog amplifier -> linear IC -> power management & signal chain. The OPAx192 e-trim family improves offset and drift during final test, eliminating the need for the user to null the offset externally. Key differentiating specifications include 5.5 nV/√Hz input voltage noise density at 1 kHz, 1.8 mV maximum input offset voltage over temperature, 5 pA typical input bias current, 1 mA quiescent current per channel, and a robust 36V absolute-maximum supply rating. The RRIO topology swings within a few millivolts of both rails on input and output, simplifying single-supply designs and maximizing dynamic range when powering low-voltage ADCs from higher analog rails. The OPA4192 uses TI's e-trim trimming process combined with a CMOS input stage, providing low input bias current (5 pA typical) and low noise without the drawbacks of traditional JFET or bipolar input stages. Its MUX-friendly input architecture prevents input over-voltage back-flow to the supply when the input exceeds the rails, allowing the device to sit on the same signal bus as switched-capacitor multiplexers without interaction. Typical applications include precision analog input modules for industrial PLCs, multi-channel data acquisition front ends, instrumentation signal conditioning, active filters and buffers for test & measurement equipment, and transducer amplifiers for pressure, strain-gauge, and thermocouple sensors. The quad channel count is well suited for bridge-type sensors that need excitation buffering plus three instrument amplifiers per channel, or for four-channel analog input modules on factory-automation backplanes. Design considerations include adequate PCB thermal relief for 36V operation, input protection when the source impedance is high, and supply decoupling within 5 mm of each supply pin. The MUX-friendly input eliminates the need for additional series input resistors in many multiplexed applications, simplifying the BOM and reducing board area. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a typical DigiKey or Mouser product page, giving engineers a one-stop technical summary for the OPA4192IPW.

견적 요청 문의하기
OPA4209AIPWR - Quad 2.2nV/rtHz 18MHz 36V Precision Op Amp | TI
OPA4209AIPWR

OPA4209AIPWR - Quad 2.2nV/rtHz 18MHz 36V Precision Op Amp | TI

The Texas Instruments OPA4209AIPWR is a quad-channel, 2.2 nV/√Hz, 18 MHz, precision, rail-to-rail output (RRO) operational amplifier supplied in a 14-pin TSSOP (PW) package, specified for operation from -40 °C to +125 °C. It supports supply voltages from 4.5 V to 36 V single-supply (or ±2.25 V to ±18 V dual-supply), delivering a maximum supply current of 2.5 mA per channel while achieving very low voltage noise density. The combination of low noise, wide bandwidth, low offset, and rail-to-rail output swing makes it ideal for high-resolution signal acquisition. An operational amplifier is a high-gain DC-coupled electronic voltage amplifier with differential inputs and a single-ended output, forming the fundamental building block of analog signal chains. Precision op amps in particular target low offset voltage, low input bias current, low noise, and high open-loop gain so they can amplify millivolt-level signals without adding meaningful error. The OPA4209 belongs to the precision low-noise op-amp family (precision op amp -> low-noise amplifier -> operational amplifier -> analog IC -> semiconductor), bridging sensor/transducer signal conditioning and downstream ADC drivers. Key features include 2.2 nV/√Hz input voltage noise density at 1 kHz, 18 MHz unity-gain bandwidth, 6.5 V/µs slew rate, 130 dB open-loop gain (AOL), 150 µV typical input offset voltage, and rail-to-rail output swing. The device is unity-gain stable and accepts capacitive loads up to 1 nF, simplifying its use as a buffer or transducer interface without external compensation. The TSSOP-14 surface-mount package has a thermal resistance (θJA) of approximately 130 °C/W, requiring attention to total dissipation in multi-channel operation at high ambient temperature. The OPA4209AIPWR uses TI's proprietary precision bipolar process with a trimmed input stage to deliver 130 dB AOL and low offset drift across the full -40 °C to +125 °C range. Its CMOS-compatible input bias current (~ 1 nA typical) simplifies interface to high-impedance sensors and photodiode front ends. The RRO architecture eliminates the need for negative rails in single-supply systems, maximizing dynamic range in low-voltage 5 V or 12 V designs. Typical applications include precision data acquisition front ends, 16-bit and 18-bit SAR ADC drivers, industrial process-control analog I/O, multi-channel sensor signal conditioning (strain gauge, RTD, thermocouple), medical instrumentation, test-and-measurement equipment, and active filters. The wide 36 V supply range also makes it suitable for ±15 V pro-audio and industrial automation boards. When designing with this amplifier, observe the input common-mode range which extends to the negative rail but stays approximately 1.5 V below the positive rail (it is not a true RRIO). For 5 V single-supply designs, this is usually not a problem; for 36 V designs, ensure VCM stays within the linear input range to avoid distortion. This page synthesizes distributor pricing, drop-in alternatives (including same-brand TSSOP-14 quads from the OPAx209 family and cross-brand equivalents), comparison parameters, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
OPA4374AIDR - Quad 6.5MHz RRIO Op Amp | Texas Instruments
OPA4374AIDR

OPA4374AIDR - Quad 6.5MHz RRIO Op Amp | Texas Instruments

The Texas Instruments OPA4374AIDR is a quad-channel, 5.5V, 6.5MHz, rail-to-rail input and output (RRIO) CMOS operational amplifier supplied in a 14-pin SOIC package, designed for low-power, low-cost precision signal conditioning across industrial, portable, and consumer systems. It delivers a 6.5 MHz gain-bandwidth product and 5 V/us slew rate while consuming only 585 uA of quiescent current per channel, giving designers a strong speed-to-power ratio in a small surface-mount footprint. An operational amplifier (op amp) is a high-gain differential DC-coupled amplifier that uses external feedback to set gain, bandwidth, and transfer characteristics; it is the foundational building block of analog signal chains. Quad op amps integrate four independent amplifiers into a single package, reducing board area and channel-to-channel matching error in multi-channel systems such as sensor arrays, audio front-ends, and active filters. The OPA4374 extends this topology into the CMOS process node, achieving rail-to-rail input and output swing on a single supply up to 5.5V, which maximizes dynamic range in low-voltage designs. Key specifications include a maximum input offset voltage of 5 mV, a low input bias current of 10 pA maximum, 6.5 MHz unity-gain bandwidth, 5 V/us slew rate, 585 uA per-channel quiescent current, and a CMOS input stage that extends 200 mV beyond both supply rails. The output swings to within 25 mV of either rail at moderate load, and the device operates from a single 2.7V to 5.5V supply, or +/-1.35V to +/-2.75V from split rails. The OPA4374AIDR is specified across the -40C to +125C industrial temperature range and is offered in a 14-pin SOIC (D) package with RoHS-compliant lead-free (Pb-free) matte-tin plating. Architecturally, the OPA4374 uses a CMOS input differential pair followed by a class-AB output stage that delivers ~30 mA of short-circuit output current and supports capacitive loads up to ~1 nF in unity-gain configurations. The RRIO topology uses complementary N- and P-channel input stages that combine in a summing node to extend the common-mode range beyond the rails, while the output stage uses charge-pump-free rail-sensing to maintain output swing close to both rails. EMI rejection is enhanced by the small input-stage capacitance and the wide GBW relative to typical industrial noise frequencies. Typical applications include multi-channel sensor signal conditioning, battery-powered instrumentation, active filters, transimpedance amplifiers for photodiodes, and low-side or high-side current sensing. Designers often choose the OPA4374 when four channels, low power, and rail-to-rail swing must coexist in a small industrial footprint. When designing with this device, verify that the input common-mode voltage stays within the specified 200 mV beyond-rail range and ensure the output stage sees a load no smaller than ~2 kOhm to preserve linearity, especially at the top end of the supply.

견적 요청 문의하기
OPA4488 - Quad 48V 14MHz Zero-Drift Op Amp | TI
OPA4488

OPA4488 - Quad 48V 14MHz Zero-Drift Op Amp | TI

The OPA4488 is a quad, 48V, 14MHz, zero-drift, mux-friendly CMOS precision operational amplifier from Texas Instruments. It operates from a 4.5V to 48V supply voltage range and features a 60V absolute maximum rating, enabling robust circuit designs in industrial and automotive applications. The device is available in a 14-pin SOIC package (DR) and a 14-pin TSSOP package (PW), providing flexibility for various PCB layouts. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, used in signal conditioning, filtering, and mathematical operations. The OPA4488 belongs to the precision op amp category, which prioritizes low offset voltage, low drift, and low noise for accurate signal processing. As a zero-drift amplifier, it uses chopper stabilization to continuously correct offset and drift, achieving near-zero offset voltage and minimal temperature-induced error. Key features of the OPA4488 include a low quiescent current of 1.5mA per amplifier, a wide bandwidth of 14MHz, and a low noise density of [DATA_NEEDED: input voltage noise density]. The zero-drift architecture provides an offset voltage of [DATA_NEEDED: offset voltage] and a drift of [DATA_NEEDED: offset drift], making it ideal for precision applications. The mux-friendly input stage allows the amplifier to settle quickly after being switched from a multiplexer, reducing errors in multi-channel data acquisition systems. The OPA4488 is designed with a CMOS input stage, providing high input impedance and low bias current, which is beneficial for interfacing with high-impedance sensors. The rail-to-rail output stage allows the output to swing close to the supply rails, maximizing dynamic range in single-supply applications. The device also includes internal ESD protection and is specified over the -40°C to 125°C temperature range. Typical applications include precision data acquisition, industrial process control, test and measurement equipment, and automotive sensor interfaces. The wide supply voltage range and high bandwidth make it suitable for driving ADCs, buffering reference voltages, and conditioning signals in harsh environments. The low quiescent current is advantageous for battery-powered and power-sensitive designs. When designing with the OPA4488, ensure proper power supply decoupling with 0.1uF ceramic capacitors close to the supply pins. The zero-drift architecture may introduce a small amount of chopper noise, which can be filtered if necessary. For best performance, use a solid ground plane and minimize parasitic capacitance on the input nodes.

견적 요청 문의하기
OPA541BM - 5A High-Power Operational Amplifier | Texas Instruments
OPA541BM

OPA541BM - 5A High-Power Operational Amplifier | Texas Instruments

Texas Instruments OPA541BM is a high-power monolithic operational amplifier designed for continuous output currents up to 5 A and peak output currents up to 10 A. It operates from power supplies up to ±40 V and is offered in an isolated 8-pin TO-3 hermetic package suitable for direct heatsink mounting. Programmable internal current limiting provides an additional layer of protection for the amplifier and connected load. A high-power operational amplifier is an operational amplifier engineered to drive low-impedance loads with much greater current than a conventional precision amplifier. Within the broader signal-chain hierarchy, it combines the function of a voltage-feedback operational amplifier with output-driver circuitry capable of delivering substantial current into audio, industrial, communications, and instrumentation loads. The OPA541BM therefore belongs to the power-operational-amplifier category rather than the general low-power operational-amplifier category. The primary features of the OPA541BM include ±40 V maximum power-supply operation, 5 A continuous output current, 10 A peak output current, and user-programmable current limiting with a single external resistor. Its proprietary bipolar and FET process supports the combination of power-output capability and wide supply-voltage operation. The hermetic TO-3 construction is electrically isolated from the circuit, allowing the device to be mounted directly to a heat sink without a separate package insulator. Programmable current limiting is particularly useful when the amplifier drives a load that can present a short circuit or unexpectedly low impedance. Setting the limit with an external resistor allows the design engineer to define the maximum output current more closely to the application's requirements. This function should still be supplemented by appropriate supply fusing, fault analysis, and thermal design because current limiting alone does not remove every potential failure mode. Typical uses include power audio stages, laboratory test equipment, motor-driver interfaces, power-converter control loops, audio mixers, and instrumentation requiring high current drive into low-impedance loads. In each case, the load, output wiring, supply rails, and thermal path must be checked so that the amplifier can dissipate the required power without excessive junction temperature or output-distortion growth. The primary design trade-off is output-current capability versus heat generated during operation. At large supply-to-output voltage differences or into low-resistance loads, dissipation can increase rapidly even when output current remains below its continuous rating. Choose the smallest possible voltage drop across the amplifier, use low-thermal-resistance copper, and select a heat sink appropriate for the worst-case load and ambient conditions. This product page consolidates the OPA541BM supply capability, current ratings, programmable protection, package information, application guidance, and design considerations. It also distinguishes verified device characteristics from parameters that require confirmation in the manufacturer datasheet, helping engineers plan power stages, thermal management, fault protection, and replacement decisions with greater engineering precision.

견적 요청 문의하기
OPA544T - 4A High-Voltage Power Op Amp | Texas Instruments
OPA544T

OPA544T - 4A High-Voltage Power Op Amp | Texas Instruments

The Texas Instruments OPA544T is a high-voltage, high-current operational amplifier with a typical output current of 4 A, a wide power-supply range of ±10 V to ±35 V, an 8 V/µs slew rate, internal current limiting, thermal shutdown protection, and FET inputs with 100 pA maximum bias current. It is supplied in a 5-lead TO-220 plastic power package for heat-sink-based thermal management. An operational amplifier is an active analog signal-conditioning device that uses high open-loop gain to amplify the difference between its inverting and non-inverting inputs. The OPA544 belongs to the broader power-op-amp hierarchy within amplifier ICs, combining precision-style signal amplification with the output-current capability required to drive loudspeakers, motors, solenoids, and other high-current loads. The device is designed for applications where a conventional small-signal amplifier cannot supply enough output current. Key features include a minimum high output current of 2 A, a typical high-current capability of 4 A, a wide ±35 V power-supply range, and an 8 V/µs slew rate. Internal current limiting protects the output stage during overload conditions, while thermal shutdown provides an additional protection mechanism. The 100 pA maximum input bias current is suitable for high-impedance sensing arrangements and reduces input-current-related errors. The copper tab and TO-220-5 package are intended for mounting to a heat sink rather than unrestricted PCB-only operation. The OPA544T is designed around a wide supply range and a power output stage capable of delivering substantial current. Its exact output-current, thermal, and electrical limits must be checked against the manufacturer datasheet for the selected supply voltage, output waveform, duty cycle, and ambient temperature. The part is suitable for audio power stages, motor and actuator drivers, laboratory output stages, power conversion modules, and industrial control systems where the load requires a high-current amplifier. Thermal design is central to using the OPA544T reliably. The device dissipates power as the difference between supply and output voltage is multiplied by output current, so load current, output swing, supply voltage, and ambient temperature determine the required heat-sink area. The TO-220 package should be mounted with its tab electrically and thermally connected to the heat sink according to the package and application guidance. This page combines manufacturer specifications, distributor availability, verified sourcing information, same-family drop-in alternatives, and practical thermal and layout guidance for engineers evaluating the OPA544T.

견적 요청 문의하기
OPA547F/500 - 500mA High-Voltage Op Amp w/ Shutdown | Texas Instruments
OPA547F/500

OPA547F/500 - 500mA High-Voltage Op Amp w/ Shutdown | Texas Instruments

The Texas Instruments OPA547F/500 is a high-voltage, high-current operational amplifier capable of delivering 500 mA continuous output current from a wide single supply (8 V to 60 V) or dual supply (±4 V to ±30 V) rail, housed in a 7-pin TO-263 (DDPAK-7, KTW) surface-mount power package. Designed for direct drive of resistive, inductive, and piezoelectric loads, the device combines a 1 MHz gain-bandwidth product with a 6 V/µs slew rate and integrates both adjustable current limit and thermal shutdown protection. What is a high-current power operational amplifier? A high-current power op amp is a specialized linear integrated circuit that combines the precision, feedback control, and closed-loop stability of a general-purpose op amp with the output drive capability required to source or sink hundreds of milliamps directly into a load. Unlike a small-signal op amp, the power op amp includes on-chip thermal protection, wide supply-voltage tolerance, and often an output-disable or shutdown pin. In the system hierarchy it sits between a low-level control circuit (such as a microcontroller DAC, a sensor conditioner, or an analog signal path) and a high-power load (motors, solenoids, heaters, audio transducers). The OPA547 belongs to this power-op-amp category and is widely used as a programmable current source, H-bridge driver, audio line driver, or high-voltage transducer amplifier. Key features of the OPA547F/500 include a wide output voltage swing that approaches each supply rail, fully-protected operation with user-adjustable current limit via a single external resistor, dedicated Enable/Shutdown (E/S) pin with a status flag, and thermal shutdown indication. The integrated protections dramatically reduce external component count and simplify PCB layout in motor, solenoid, and valve driver designs. Architecturally, the OPA547 uses a complementary bipolar output stage capable of swinging within ~1 V of each rail at full load, paired with a precision input stage that provides 100 nA input bias current and 1 mV typical input offset voltage. The combination delivers dc accuracy suitable for closed-loop transducer biasing while still providing the high transient current demanded by reactive loads. Typical applications include high-voltage motor and solenoid drivers, programmable voltage and current sources, valve and actuator control in industrial automation, audio amplifiers and line drivers, and test-and-measurement power boosters. The wide supply range also makes it suitable for 24 V industrial bus systems and 48 V telecom/battery systems. When designing with the OPA547F/500, ensure the PCB copper pour under the exposed tab is sized to keep junction temperature within the 150 °C maximum, and choose the ILIM resistor carefully to set the current-limit threshold just above the maximum required load current to avoid false triggering yet still protect against short circuits. This page synthesizes the manufacturer datasheet, current distributor pricing, pin-compatible alternatives, and practical design notes to support fast, reliable selection for power analog designs.

견적 요청 문의하기
OPA547T - 60V High-Current Op Amp | Texas Instruments
OPA547T

OPA547T - 60V High-Current Op Amp | Texas Instruments

The Texas Instruments OPA547T is a high-voltage, high-current operational amplifier with a 60 V maximum single-supply rating, a ±30 V dual-supply capability, and 500 mA continuous output current in a 7-pin TO-220 (KVT) package. It includes output-disable control, adjustable current limiting, and thermal shutdown, making it suitable for power stages that require more output drive than a conventional signal-level operational amplifier. A high-current operational amplifier is a voltage-feedback amplifier that combines differential input amplification with low-impedance output drive. The OPA547 belongs to the operational-amplifier hierarchy within analog and linear power-management ICs, extending ordinary op-amp signal-conditioning roles into motor, transducer, solenoid, and high-current feedback applications. Its seven-lead power package provides a practical thermal path for dissipating power in the output stage. Key features include operation from a single supply up to +60 V or from dual supplies up to ±30 V, continuous output current of 500 mA, a wide output-voltage swing, and a wide bandwidth of 1 MHz according to the manufacturer product information. Output-disable control allows the amplifier to be placed into a shutdown state, while adjustable current limit and thermal shutdown provide protection when the driven load demands excessive current or the device exceeds its safe thermal operating condition. The OPA547T uses a single operational-amplifier channel with shutdown capability. Its architecture is intended to drive relatively low-impedance loads without relying on an external output-buffer stage. The E/S pin can also be monitored to determine whether the amplifier has entered thermal shutdown, providing a usable system-level status indication. The broad supply range allows operation from elevated industrial rails without requiring a separate high-voltage driver stage. Typical uses include driving power MOSFET or bipolar-transistor output stages, controlling high-current solenoids, driving audio or instrumentation loads, and implementing voltage-feedback control loops in power-conversion equipment. The 500 mA continuous output capability is especially useful when a load would exceed the output-current limits of a conventional small-package op amp. Applications must still account for the voltage and current dissipated by the output stage. The primary design consideration is thermal management. Copper area, heat sinking, and the actual load duty cycle determine whether the TO-220 package can dissipate the calculated output-stage power safely. The output-disable and current-limit functions should be defined during startup, fault handling, and system shutdown so that the amplifier is not inadvertently operated in a state that exceeds its thermal or current capability. This page consolidates the verified manufacturer and distributor information for the OPA547T with package, procurement, application, and design guidance. It also distinguishes genuine same-package alternatives from merely similar amplifiers, helping engineers assess replacement risk without assuming that a common high-voltage or high-current feature guarantees pin-to-pin compatibility.

견적 요청 문의하기
OPA548T - High-Voltage Power Op Amp | Texas Instruments
OPA548T

OPA548T - High-Voltage Power Op Amp | Texas Instruments

Texas Instruments OPA548T is a single-amplifier, high-voltage, high-current power operational amplifier with a 1 MHz gain-bandwidth product, 10 V/µs slew rate, and ±4 V to ±30 V supply operating range, housed in a 7-lead TO-220 power package. It is designed for applications requiring a wide output-voltage swing and the ability to drive demanding loads. An operational amplifier is a voltage-gain and signal-conditioning component used in the amplifier IC category to amplify, buffer, filter, or control analog signals. Power operational amplifiers extend that hierarchy into high-current or high-voltage drive functions, where the output stage must deliver more energy than a conventional low-power op amp. OPA548T therefore belongs to the power management and analog signal-chain ecosystem rather than serving as a precision instrumentation amplifier. Key verified attributes include a 1 MHz gain-bandwidth product, 10 V/µs slew rate, operation from positive or negative supplies between ±4 V and ±30 V, and a 7-pin TO-220 package. The manufacturer describes the device as a low-cost, high-voltage, high-current amplifier intended to drive a wide variety of loads. Its monolithic laser-trimmed construction supports accurate low-level signal behavior while the power output stage provides high output voltage and current capability. OPA548T uses thermal-shutdown and current-overload protection. Its E/S pin can be monitored to determine whether the amplifier has entered thermal shutdown, providing a useful system-level status indication. The device also provides a user-selected current-limit function. These protections are important in power stages where load transients, wiring faults, or motor behavior could otherwise force the amplifier outside its intended operating condition. Typical uses include audio power stages, motor and solenoid drivers, industrial actuator interfaces, loudspeaker systems, and high-voltage analog signal conditioning. The broad supply range permits dual-supply operation up to ±30 V and lower-voltage systems down to ±4 V. Designers must select the output current and thermal limits appropriate to the load rather than treating the amplifier as an unrestricted output stage. The primary design consideration is thermal management. A 7-lead TO-220 package is intended to transfer heat through its tab to a heatsink or substantial copper area. Input, feedback, supply-decoupling, and output-return layout should follow the manufacturer application guidance, and output-current protection should not replace a properly designed thermal path. This page combines verified manufacturer and distributor information, drop-in ordering variants, application guidance, and engineering-focused comparison data. It also clearly identifies pricing and package-drawing gaps where the supplied source material does not provide verified values, helping engineers distinguish documented facts from design-dependent assumptions.

견적 요청 문의하기
OPA549S - 8A High-Voltage Power Op Amp | Texas Instruments
OPA549S

OPA549S - 8A High-Voltage Power Op Amp | Texas Instruments

The Texas Instruments OPA549S is a single-channel, high-voltage, high-current operational amplifier capable of delivering 8 A continuous output current and 10 A peak output current. The device operates from a single supply up to +60 V or from dual supplies up to ±30 V, and it is supplied in an 11-pin power package. It combines wide output-voltage swing with thermal shutdown, adjustable current limiting, and output-disable control for driving demanding loads. An operational amplifier, or op amp, is a high-gain analog signal-conditioning device that controls the voltage applied to its output so that the output follows the differential voltage presented to its inputs. The OPA549 belongs to the power-operational-amplifier hierarchy: op amp → power op amp → high-voltage amplifier → analog semiconductor. Unlike ordinary precision or low-noise op amps, this device is designed to source or sink substantial current while operating across a wide supply-voltage range. The OPA549S provides 8 A continuous and 10 A peak current capability, a single-supply operating range extending to +60 V, and a dual-supply range of ±30 V. Its wide output-voltage swing is useful when the amplifier must provide a large load current close to its supply rails. Fully integrated protection includes thermal shutdown and adjustable current limiting, while the output-disable control allows the output to be electrically turned off during selected operating states. The architecture is suitable for voltage-feedback operation because the device combines relatively high gain-bandwidth product with high output-current capability. This allows it to amplify low-level control signals while driving external power stages, motors, solenoids, lamps, and other low-impedance loads. Designers must account for the large power dissipation created when output current and supply-to-output voltage differential are simultaneously high. Typical applications include motor and actuator drivers, laboratory power stages, audio power amplification, industrial solenoid drivers, LED power drivers, and high-current voltage-control loops. In each case, the 8 A continuous and 10 A peak ratings provide useful output headroom, provided that the PCB copper, thermal path, load wiring, and protection network are designed for the intended operating conditions. The primary design consideration is thermal management. Estimated dissipation equals the amplifier output voltage multiplied by the output current, while internal losses also depend on the supply voltage and quiescent current. The exposed power-package tab or thermal lead must connect to an adequate copper area, and output-current limits should be set no higher than necessary for the load. Reactive loads also require back-EMF protection because the amplifier cannot safely absorb unlimited reverse energy. This page consolidates the verified OPA549S supply, current, protection, package, pricing, and cross-reference information while clearly separating unavailable electrical details. It also provides practical thermal, layout, and selection guidance that is not presented as a single value in distributor listings.

견적 요청 문의하기
OPA549T - High-Voltage 3A Power Op Amp | Texas Instruments
OPA549T

OPA549T - High-Voltage 3A Power Op Amp | Texas Instruments

The Texas Instruments OPA549T is a single high-voltage, high-current operational amplifier with a 9 V/µs slew rate, 900 kHz gain-bandwidth product, and a 60 V maximum supply voltage. The device is supplied in an 11-pin TO-220 (KV) power package and is intended for high-current, high-voltage signal amplification. According to the Texas Instruments product page, its defining feature is excellent output swing. An operational amplifier is an active analog signal-conditioning device that uses negative feedback to amplify the difference between its input voltages. A high-voltage power operational amplifier extends this general-purpose category into applications requiring large output-voltage excursions and substantial output current. In the electronics hierarchy, the OPA549T is an operational amplifier, analog amplifier, power amplifier, and signal-conditioning IC. It differs from small-signal op amps through its wide supply range, high output-current capability, and thermally capable package. Verified ordering information identifies the OPA549T as a single-amplifier device in the TO-220 (KV) package with an operating-temperature range of -40°C to 85°C. The specified supply range extends from 8 V to 60 V, while the listed gain-bandwidth product is 900 kHz and slew rate is 9 V/µs. These values make the part relevant to applications requiring broader voltage and current handling than conventional precision or low-noise op amps. The OPA549T uses a high-voltage, high-current output stage designed for excellent output swing. Its combination of high supply voltage, 9 V/µs slew rate, and current capability is useful when driving resistive or reactive loads through external transistor stages. In such designs, the op amp provides high-voltage error amplification and drive voltage, while external power transistors provide the required load current. The TO-220 package also supports through-hole mounting and thermal management by providing a practical path for heat removal. Typical application areas include high-voltage audio amplifiers, motor-drive control, power-supply control, laboratory test equipment, servo systems, and high-current analog signal chains. The device can serve as the error amplifier in a discrete power stage because its output can command high-voltage switching circuitry. Its 60 V maximum supply also provides useful headroom in industrial and laboratory systems, subject to proper thermal and transient protection. Designers must account for power dissipation in both the amplifier and any external output transistors. A practical design should verify output swing into the actual load, maintain adequate input common-mode range, provide stable feedback compensation, and protect the output stage against shorts or inductive transients. The 900 kHz bandwidth means the closed-loop feedback network should be checked carefully to prevent unintended oscillation. This page combines verified manufacturer and distributor information with application-focused engineering guidance, a pinout-availability warning, drop-in comparison candidates, and practical design considerations. It is intended to help engineers identify whether the OPA549T’s voltage, current, bandwidth, slew-rate, package, and thermal requirements fit a specific analog power-amplifier design.

견적 요청 문의하기
OPA551PA - 60V High-Current Op Amp | Texas Instruments
OPA551PA

OPA551PA - 60V High-Current Op Amp | Texas Instruments

The Texas Instruments OPA551PA is a high-voltage, high-current operational amplifier designed for applications requiring operation from a 60 V supply and substantial output drive current. The device provides a typical output current capability of 380 mA, a 15 V/µs slew rate, and a 3 MHz unity-gain bandwidth in an 8-pin PDIP package. It is unity-gain stable, making it suitable for buffer, driver, and audio output stages where the required gain is close to one. An operational amplifier is an active analog device that amplifies the difference between two input voltages while providing high input impedance, low output impedance, and controlled gain and bandwidth. The OPA551PA belongs to the high-voltage power operational amplifier family, combining a 60 V maximum supply capability with current-drive capability that exceeds ordinary precision op amps. This makes it useful in telephone, audio, industrial control, and instrumentation systems where the load requires more current than a conventional small-signal amplifier can provide. Key features include a wide 60 V supply range, typical output current of 380 mA, unity-gain stability, 3 MHz bandwidth, and a 15 V/µs slew rate. The amplifier is designed for a single-supply or dual-supply configuration, depending on the system requirements and the application circuit. Its high-current output stage makes it effective for driving capacitive loads, transformer inputs, audio transducers, and other loads that would overload a standard precision amplifier. The OPA551PA uses a high-voltage, high-current internal architecture that is intended to maintain signal integrity while driving low-impedance loads. The 3 MHz bandwidth supports moderate-frequency signal paths rather than high-speed instrumentation or RF applications. Its 15 V/µs slew rate provides the output-current capability needed for larger-amplitude signals, while unity-gain stability allows direct voltage-follower use without compensation external components. Typical applications include telephone line drivers, audio power amplifiers, headphone and transducer drivers, ultrasonic-driver circuits, industrial actuator interfaces, and high-voltage measurement systems. In audio applications, the amplifier can buffer a signal source and deliver current into a speaker or transformer load. In industrial systems, the 60 V capability supports higher-voltage signal chains while the 380 mA typical current capability handles demanding loads. When designing around the OPA551PA, check the load current, output voltage swing, supply headroom, thermal dissipation, and stability requirements together. Place the decoupling capacitors close to the supply pins and keep the feedback path short to reduce oscillation risk. Confirm the maximum operating temperature, package tolerances, and output-current derating against the manufacturer datasheet before production release. This page combines manufacturer specifications, package details, application guidance, and drop-in replacement information for engineers evaluating the OPA551PA in high-voltage amplifier and driver designs. It also provides practical comparison points for OPA551 family variants and compatible alternatives in the same 8-pin PDIP format.

견적 요청 문의하기
OPA551UA - 60V High-Current Operational Amplifier | Texas Instruments
OPA551UA

OPA551UA - 60V High-Current Operational Amplifier | Texas Instruments

The Texas Instruments OPA551UA is a single, high-voltage, high-current operational amplifier with a 60 V maximum supply capability, 380 mA typical output current, and an 8-pin SOIC package. It combines a 3 MHz gain-bandwidth product with a 15 V/µs slew rate, making it suitable for demanding signal-conditioning and power-buffer stages operating from high-voltage rails. An operational amplifier is a voltage-gain and signal-conditioning semiconductor that compares an inverting input with a non-inverting input and drives its output according to the feedback network. The OPA551 belongs to the operational-amplifier hierarchy, where its unusually high supply-voltage tolerance and output-current capability extend ordinary precision amplifier use into high-power industrial, audio, instrumentation, and motor-control systems. The OPA551UA provides a wide supply range up to ±30 V, continuous output current up to 200 mA, and typical current capability of 380 mA. Its input noise density is 14 nV/√Hz, while unity-gain stability permits operation without a minimum gain setting. Output swing remains approximately 2 V from the supply rails, providing useful headroom for driving external transistors and other high-current loads. The device also includes thermal shutdown, output-current limiting, and a thermal-shutdown indicator. Its 15 V/µs slew rate supports faster large-signal transitions than a general-purpose low-power amplifier, while the 3 MHz bandwidth is sufficient for audio, control, and instrumentation signals. The high-current output stage should still be evaluated against the thermal limits of the 8-pin SOIC package and the surrounding copper area. Typical uses include audio power-buffer stages, high-voltage current-feedback circuits, industrial sensor interfaces, laboratory output stages, and power-converter control loops. Designers should also check input common-mode range, output swing, supply headroom, and thermal rise before fixing component values or external load limits. For a stable implementation, use feedback that preserves unity-gain stability, place input and output components close to the device, and provide local supply bypassing. The exposed requirements for current and temperature must be validated with the actual PCB layout rather than inferred from nominal output-current capability alone. This page combines the OPA551UA's principal electrical characteristics with package guidance, application-oriented design notes, comparison criteria, and drop-in replacement constraints. It provides a practical engineering view for selecting and implementing this high-voltage, high-current operational amplifier.

견적 요청 문의하기
OPA551UA/2K5 - 60V High-Voltage High-Current Op Amp | TI
OPA551UA/2K5

OPA551UA/2K5 - 60V High-Voltage High-Current Op Amp | TI

The Texas Instruments OPA551UA/2K5 is a high-voltage (60 V), high-current (380 mA typical) operational amplifier supplied in an 8-pin SOIC (D) package, tape-and-reel packaged as the /2K5 shipping variant. It is unity-gain stable, offers a 15 V/us slew rate, 3 MHz of gain-bandwidth product, and operates from +/-30 V supplies (or a single 60 V supply). The device is specified across the -40 C to +125 C industrial temperature range and delivers low-level signal accuracy through monolithic laser-trimmed input stages. A high-power operational amplifier (high-voltage op amp) is an analog IC that can both swing its output close to the rails and source/sink substantial load current while preserving small-signal fidelity. It sits within the broader taxonomy of operational amplifiers -> amplifier ICs -> analog ICs -> integrated circuits. Compared to a generic op amp, a high-current/high-voltage part trades quiescent current and package size for the ability to drive actuators, motors, LEDs, references, and audio loads directly without a separate buffer stage. Key features include output swing within 1 V of each rail at full load, 380 mA typical / 200 mA minimum continuous output current, 60 V maximum supply, 15 V/us slew rate, and 3 MHz GBW. Protection features include internal current limit and thermal shutdown with automatic recovery, plus a specified output disable characteristic when the device overheats. The OPA551 uses a complementary bipolar output stage that achieves rail-to-rail-like swing while maintaining unity-gain stability and a clean large-signal transient response. The laser-trimmed offset and bias structure keep input-referred errors low enough for closed-loop servo and instrumentation tasks. Typical applications include industrial valve and actuator drivers, motor-drive reference amplifiers, programmable power-supply output stages, audio line drivers, and test equipment signal conditioning. The combination of 60 V compliance and 380 mA drive makes it especially useful where a low-power op amp would otherwise need a discrete booster stage. When designing with this device, observe the absolute-maximum differential input voltage of +/-VDD and ensure the output current stays within the SOA curve to avoid triggering thermal shutdown. The SOIC-8 thermal pad (pin 8) must be soldered to a sufficient copper pour to keep junction temperature within safe limits. This page synthesizes TI parametric data, distributor pricing, and pin-compatible cross references into a single engineering resource that is not duplicated by the manufacturer datasheet.

견적 요청 문의하기
OPA552UA - 380mA, 60V, 12MHz Operational Amplifier | TI
OPA552UA

OPA552UA - 380mA, 60V, 12MHz Operational Amplifier | TI

Texas Instruments OPA552UA is a single operational amplifier designed for high-voltage and high-current signal-chain applications, delivering 380 mA typical output current, 60 V high-voltage capability, and 12 MHz wide bandwidth in an 8-pin SOIC package. It is optimized for gains of 5 or greater and is suitable for telephony, audio, servo-control, and test-equipment circuits. An operational amplifier is an active analog signal-processing component that uses differential feedback to amplify the voltage difference between its non-inverting and inverting inputs. The OPA552 belongs to the operational-amplifier hierarchy within analog and power-management semiconductors. Its combination of wide supply-voltage range, high output-current capability, and wide bandwidth allows it to drive loads that are beyond the practical limits of many conventional precision amplifiers. The principal features of the OPA552 include 380 mA typical output current, operation across a 60 V supply range, 12 MHz gain-bandwidth performance, and a slew rate of 24 V/µs. These characteristics make it appropriate for amplifier stages requiring both signal bandwidth and substantial load-driving capability. The device is also available in SOIC-8, PDIP-8, and higher-current power-package options within the OPA55x family. OPA551 and OPA552 devices use laser-trimmed monolithic integrated circuits and are specified over the extended industrial temperature range from -40 °C to +125 °C. The OPA552 is positioned as the faster, higher-current member of the related OPA551 and OPA552 comparison. A feedback-network design using gains of 5 or greater helps preserve bandwidth and stability in applications that need to drive low-impedance or current-sensitive loads. Typical uses include telephone-interface amplification, audio output stages, servo and motor-control loops, waveform-generation circuits, laboratory instrumentation, and power-supply feedback networks. In each case, the amplifier combines a wide common-mode operating range with the ability to source or sink considerably more current than a conventional small-signal operational amplifier. The principal design trade-off is thermal dissipation. At high supply voltage and sustained output current, power converted into heat can become substantial, so PCB copper area, enclosure temperature, and nearby heat sources require attention. Decoupling capacitors should be placed close to the supply pins, and the feedback components should use values consistent with the intended gain and bandwidth. This product page combines manufacturer specifications, a same-package OPA551UA alternative, application guidance, and parameter-level comparison information to support faster component evaluation and board-level sourcing decisions.

견적 요청 문의하기
OPA602AP - 6.5MHz Precision Difet Op Amp | Texas Instruments
OPA602AP

OPA602AP - 6.5MHz Precision Difet Op Amp | Texas Instruments

The Texas Instruments OPA602AP is a high-speed precision Difet (dielectrically isolated FET) operational amplifier delivering 6.5 MHz bandwidth, 35 V/us slew rate, and a maximum offset voltage of +/-250 uV, housed in an 8-pin PDIP package. An operational amplifier is a high-gain voltage amplifier with differential inputs and a single-ended output, forming the foundational building block of the analog signal chain hierarchy: op amp -> amplifier IC -> analog IC -> semiconductor. Precision op amps such as the OPA602 combine the accuracy of a precision bipolar device with the speed of a FET-input design, making them a category distinct from general-purpose amplifiers. Key features include a maximum input bias current of +/-1 pA, enabled by the Difet JFET input stage; fast settling time to 0.01%; and unity-gain stability. According to the TI datasheet, the device is unity-gain stable and can drive capacitive loads up to 1500 pF, an unusually high capacitive-drive capability for a precision amplifier. Laser-trimmed input circuitry provides offset voltage and drift performance normally associated with precision bipolar op amps. The monolithic Difet (dielectrically isolated FET) construction is the core technology: dielectric isolation eliminates the parasitic junction capacitances of conventional JFET processes, allowing an unusual combination of high speed and accuracy in one die. Wide bandwidth and low distortion minimize AC errors, while the picoampere input bias current minimizes DC errors in high-impedance signal paths. Typical applications include precision instrumentation front ends, optoelectronics receivers, and sonar and ultrasound signal processing, where pulse fidelity and DC accuracy must coexist. Datasheet specifications are rated with a 1 kOhm resistor in parallel with a 500 pF load, so engineers should evaluate dynamic specs against actual load conditions. A key design consideration is supply headroom: the OPA602AP operates from +/-18 V supplies, and the Difet input stage performs best when inputs are kept within the linear common-mode range; output settling behavior should be verified in breadboard when driving heavy capacitive loads. This page synthesizes distributor pricing context, drop-in alternative analysis, pinout, and practical design notes beyond what the manufacturer datasheet alone provides.

견적 요청 문의하기
OPA602AU - 6.5MHz Precision Difet Op Amp, SOIC-8 | TI
OPA602AU

OPA602AU - 6.5MHz Precision Difet Op Amp, SOIC-8 | TI

The Texas Instruments OPA602AU is a high-speed precision Difet (dielectrically isolated FET) operational amplifier delivering 6.5 MHz bandwidth, 35 V/us slew rate, and a maximum offset voltage of +/-250 uV with a maximum input bias current of +/-1 pA, housed in an 8-pin SOIC (D) package. A precision operational amplifier is a type of analog signal-conditioning IC that amplifies small differential voltages while adding minimal DC error. Within the amplifier hierarchy, the op amp sits above general amplifiers and below full instrumentation amplifiers, which integrate multiple op amps plus laser-trimmed resistor networks. Precision op amps prioritize offset, drift, and bias current over raw speed, and the OPA602 is unusual in combining both. Key features include unity-gain stability, fast settling to 0.01% for pulse and data-conversion applications, and low distortion across its 6.5 MHz bandwidth. The Difet process isolates FET input transistors with a dielectric layer, enabling high speed without the input leakage typical of junction-isolated FET processes. Technically, laser trimming of the input circuitry yields offset and drift performance normally associated with precision bipolar amplifiers, while the FET input keeps bias current at the picoampere level, ideal for high-impedance sources. TI rates all specifications with a 1 kOhm resistor in parallel with a 500 pF load, and the device easily drives capacitive loads up to 1500 pF. Typical applications include precision instrumentation, optoelectronics, and sonar/ultrasound signal chains, where fast settling and low DC error are simultaneously required. The OPA602AU is the -25C to +85C grade in the SOIC-8 package. Design consideration: as a decompensated-speed FET amplifier at unity gain, always verify phase margin with large capacitive loads and use the offset trim pins (1 and 5) carefully, since trim range exceeds offset magnitude. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
OPA602AU/2K5 - 6.5MHz, 35V/us Precision Difet Op Amp | TI
OPA602AU/2K5

OPA602AU/2K5 - 6.5MHz, 35V/us Precision Difet Op Amp | TI

The Texas Instruments OPA602AU/2K5 is a high-speed precision Difet (dielectrically isolated FET) operational amplifier delivering a 6.5MHz bandwidth, 35V/us slew rate, and a maximum offset voltage of +/-250uV in an 8-pin SOIC (D) package rated from -25C to +85C. An operational amplifier (op amp) is a high-gain differential voltage amplifier that forms the core building block of analog signal conditioning within the broader amplifier IC hierarchy. Precision op amps like the OPA602 minimize DC errors (offset, bias current, drift) while wideband types minimize AC errors; the OPA602 uniquely combines both classes using monolithic Difet construction, in which laser-trimmed input circuitry achieves offset and drift performance normally associated with precision bipolar amplifiers while retaining the ultra-low input bias current of a FET input stage. Key features include a +/-1pA maximum input bias current, fast settling to 0.01%, unity-gain stability, and the ability to drive capacitive loads up to 1500pF. According to the TI product page, all specifications are rated with a 1k resistor in parallel with a 500pF load, and wide bandwidth with low distortion minimizes dynamic errors in pulse and data conversion signal chains. The Difet process dielectrically isolates devices, giving an unusual combination of high speed and accuracy. High slew rate and fast settling allow accurate signal processing in pulse amplification, sample-hold buffering, DAC output conditioning, and optoelectronic receivers, where low input current protects high-impedance nodes from loading errors. Typical applications include precision instrumentation front ends, sonar and ultrasound signal chains, and photodiode/optoelectronic amplification. In each case, the 6.5MHz bandwidth and 35V/us slew rate preserve signal fidelity at speed while 1pA bias current preserves DC accuracy. Design consideration: the ±5V to ±18V supply range demands attention to supply decoupling; the OPA602 is stable at unity gain but output current capability (about 20mA class) should be respected when driving heavy loads. This page synthesizes distributor pricing, verified drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet. Pricing is referenced as of 2026-09-13.

견적 요청 문의하기