LED 디스플레이
제품 (6)
E-TDA7375AV - 4x45W Quad Audio Amplifier | STMicroelectronics
The E-TDA7375AV is a quad-channel audio power amplifier from STMicroelectronics, designed for high-quality car radio and multimedia applications. It delivers up to 45W per channel (4 channels) into a 4-ohm load with a 14.4V supply, making it a robust solution for in-vehicle audio systems. The device operates from a supply voltage range of 8V to 18V and features a low quiescent current, making it suitable for battery-powered applications. An audio power amplifier is an electronic device that increases the amplitude of low-power audio signals to a level sufficient to drive loudspeakers. In the signal chain, the audio amplifier sits between the preamplifier (or head unit) and the speakers, providing the necessary voltage and current gain. The TDA7375AV belongs to the class of analog linear amplifiers, specifically a class AB amplifier, which offers a good balance between efficiency and linearity, minimizing distortion while maintaining reasonable power dissipation. Key features of the E-TDA7375AV include a high output power of 45W per channel, a wide supply voltage range, and a low distortion of 0.03% at 1kHz. It also incorporates standby and mute functions for power management, and a pop-free turn-on/off sequence to eliminate audible clicks. The device is protected against short circuits, thermal overload, and overvoltage, ensuring reliable operation in harsh automotive environments. The amplifier uses a complementary output stage with a bipolar junction transistor (BJT) architecture, providing high current capability and low saturation voltage. The device is available in a Multiwatt-15 package, which offers excellent thermal performance through a large exposed metal tab that can be soldered to the PCB for heat dissipation. The package is designed for easy mounting and is compatible with standard through-hole assembly processes. Typical applications include car radio amplifiers, multimedia systems, and aftermarket audio upgrades. The high output power and low distortion make it ideal for driving 4-ohm speakers in a car cabin, delivering clear and powerful sound. The standby and mute functions allow for efficient power management, reducing battery drain when the audio system is not in use. When designing with the E-TDA7375AV, it is essential to provide adequate heatsinking to manage the thermal dissipation, especially when driving high power levels. The device's thermal shutdown protection prevents damage from overheating, but proper PCB layout with a large copper area under the package is recommended to maintain junction temperature within safe limits.
FDA803U - 1x45W Class D Digital Input Automotive Amplifier | STMicroelectronics
The STMicroelectronics FDA803U is a single-bridge class D audio power amplifier designed for automotive applications, delivering 45W into a 4Ω load. It features a digital input interface, integrated diagnostics, and a wide voltage operation range, making it suitable for car audio, telematics, and e-call systems. The device is housed in a PowerSSO-36 EPU package and is built on advanced BCD (Bipolar-CMOS-DMOS) technology. A class D amplifier is a switching amplifier that uses pulse-width modulation (PWM) to achieve high efficiency, typically above 80%, compared to linear amplifiers. In automotive audio, class D amplifiers are preferred because they minimize power dissipation and heat generation, which is critical in the confined spaces of a vehicle. The FDA803U integrates the digital input stage, PWM modulator, and output power stage in a single IC, simplifying system design and reducing external component count. Key features of the FDA803U include a 45W output power at 10% THD into 4Ω, a wide supply voltage range from 4.5V to 18V, and a digital I2S input interface. The device also offers comprehensive diagnostics, including DC offset, short-circuit, and over-temperature protection, which are essential for automotive reliability. The PowerSSO-36 EPU package provides excellent thermal performance, with an exposed pad for efficient heat dissipation. The FDA803U is designed using ST's advanced BCD technology, which integrates bipolar, CMOS, and DMOS transistors on a single die. This allows for high-voltage operation, low quiescent current, and robust protection features. The digital input interface supports sample rates up to 96 kHz, and the device includes a built-in I2C control interface for configuration and diagnostics readback. Typical applications for the FDA803U include car radio head units, telematics systems, e-call emergency call systems, and noise/tone generators. In a car radio, the FDA803U can drive a 4Ω speaker directly, providing 45W of clean audio power. In telematics, the amplifier can be used for hands-free calling and voice prompts, where its digital input simplifies connection to a digital signal processor (DSP). When designing with the FDA803U, it is important to ensure proper PCB layout for thermal management, as the device can dissipate significant power at high output levels. The exposed pad should be soldered to a large copper area to maximize heat transfer. Additionally, the digital input should be properly terminated to avoid signal integrity issues.
ICM7228AIPIZ - 8-Digit LED Display Driver | Renesas 28-PDIP
The Renesas ICM7228AIPIZ is an 8-digit, microprocessor-compatible LED display decoder driver in a 28-pin PDIP package. It directly drives 7-segment common-cathode LED displays with on-chip BCD/hex decoding, scanning circuitry, and high-current segment drivers, operating from a single 5V supply. A display driver is a specialized interface IC that sits between a microcontroller or system bus and a visual indicator, translating digital commands into the per-segment current waveforms that light 7-segment digits. The ICM7228AIPIZ belongs to the display driver sub-category of power management and interface ICs, integrating the multiplexer, decoder, and segment current sources in one chip so the host MCU only writes digit data through an 8-bit parallel interface. Key features include 8 digits of multiplexed common-cathode drive, segment current up to approximately 30 mA per segment, on-chip BCD or hexadecimal decode mode, write-only data interface, built-in oscillator requiring only an external resistor, and industrial operating temperature range. The chip is fabricated in CMOS technology for low quiescent dissipation while delivering the high peak segment currents needed for multiplexed LED brightness. The architecture combines an 8-bit data latch, mode-select decode logic, a programmable current-setting register, and a 1-of-8 scanner. After loading digit values through the parallel bus, the device independently cycles the digit commons and decodes each nibble, freeing the host from software-based multiplexing. This makes the part especially attractive for legacy instrument front panels, point-of-sale terminals, and process-control HMIs where a microcontroller lacks the GPIO count to refresh 56 segment lines. Typical applications include digital panel meters, industrial process-control readouts, point-of-sale terminals, laboratory instrumentation displays, and appliance front-panel indicators. The "A" suffix denotes the BCD-only decode variant, while the "I" suffix indicates the industrial temperature range and PDIP package. When designing with this part, note that the output structure assumes common-cathode 7-segment displays; common-anode modules require the companion ICM7228B. Add adequate bulk decoupling near V+ and follow the datasheet trace-routing guidance to maintain segment-current matching. This page synthesizes distributor stock, pricing, and drop-in compatible Renesas/Intersil variants not aggregated in a single manufacturer datasheet, giving engineers a one-stop view for sourcing and second-source planning.
ICM7228CIPI - 8-Digit LED Display Decoder Driver, 28-PDIP | Renesas / Intersil
The Renesas / Intersil ICM7228CIPI is an 8-digit, microprocessor-compatible, 7-segment LED display decoder driver fabricated in CMOS technology. It drives up to 8 common-cathode digits, integrates BCD/hex decode logic, and includes on-board multiplex scan circuitry, all housed in a 28-pin PDIP (through-hole) package. The device operates from a single 5 V supply and directly interfaces to most 8-bit microprocessors via an 8-bit data bus and standard write strobes. What is an LED display decoder driver? It is a mixed-signal interface IC that bridges a low-voltage digital processor and a high-current 7-segment vacuum-fluorescent or LED display. Within the power management and display driver category hierarchy, it sits below GPIO expanders and segment drivers, and above simple shift-register based drivers. By integrating multiplex scan, segment decode, and digit drivers on one die, the ICM7228CIPI replaces dozens of discrete components and reduces PCB area in instrument panels, point-of-sale terminals, and digital panel meters. Key features include hardware BCD/hex digit decoding, an 8-digit common-cathode scan multiplex engine, direct 8-bit parallel microprocessor interface, 5 V single-supply operation, CMOS low-power consumption, and industry-standard 28-pin PDIP packaging. The CMOS process yields very low quiescent current suitable for battery-backed instrument clusters. The 28-pin CMOS package provides 5 mA typical segment sink current, sufficient for standard-brightness 7-segment LED digits without external transistors. Operating temperature range extends from -20 °C to +85 °C for industrial and commercial equipment. The ICM7228CIPI uses an internal oscillator and counter to sequentially enable each of the 8 digit drivers while the corresponding segment data is latched from the bus. This eliminates CPU-driven refresh overhead and frees the host microcontroller for measurement, communication, or control tasks. The device accepts either BCD or hexadecimal segment codes via configuration pins, supporting both decimal readouts and 0-F hex displays for engineering instruments. Typical applications include digital panel meters, multimeters, frequency counters, instrumentation readouts, industrial process controllers, point-of-sale terminals, and bench-top test equipment where a numeric-only 7-segment LED readout is required. The 28-PDIP package suits through-hole prototyping and repair of legacy designs. The Intersil ICM7228 is also marketed as a functional alternative to the Maxim ICM7218 display driver family, easing upgrades from older Maxim parts. When designing with this device, ensure the LED digit forward current matches the IC segment drive capability; otherwise, add external transistor buffers per digit. Decoupling the 5 V supply with a 0.1 µF ceramic capacitor placed close to VDD pin is required to prevent logic noise from corrupting the multiplex timing.
PCF8545BTT - 320-Segment 1:8 Multiplex LCD Driver | NXP
The NXP Semiconductors PCF8545BTT is a universal LCD driver for multiplex rates up to 1:8, supporting up to 320 segments and eight backplanes in a 56-pin TSSOP package. The PCF8545B variant uses a three-line unidirectional SPI-bus interface for host communication, and the device operates from a single 2.5 V to 5.5 V supply with a typical 30 uA supply current. On-chip charge-pump, bias-generation, and auto-incremented display RAM simplify host firmware while reducing external component count. A multiplex-rate LCD driver is a type of display driver IC that sequentially drives multiple rows (backplanes) and columns (segments) of a passive-matrix liquid crystal display; the PCF8545 belongs to the segment-driver IC family, which sits within display drivers > LED & Optoelectronics > semiconductors. Compared to character-matrix LCD controllers, segment drivers give the designer freedom to implement arbitrary graphic icons, alphanumeric fields, or numeric 7-segment digits on a custom glass, and they are commonly used in white goods, audio equipment, metering, and small automotive clusters. Key features include 80 character × 4 line drive capability, software-selectable multiplex rates from 1:1 to 1:8, integrated temperature compensation, low-power mode, and a programmable frame frequency. The PCF8545BTT/AJ variant is qualified to AEC-Q100 for automotive applications, and the device retains all electrical characteristics across the industrial -40C to +85C operating range. From an architectural standpoint, the PCF8545 stores the displayed pattern in an internal 320-bit display RAM and refreshes the panel autonomously. Communication overheads are minimized using auto-incremented addressing, allowing the host MCU to write sequential RAM bytes without re-issuing column addresses. An on-chip bias generator produces the required bias voltages so the system needs only a single external capacitor to stabilize the charge pump. Typical applications include metering instrumentation (electricity, gas, water meters), white-goods human-machine interfaces, audio equipment displays, small automotive instrument clusters, point-of-sale terminals, and any embedded product requiring a custom LCD glass. The wide supply range and low power consumption make the PCF8545BTT particularly attractive for battery-powered devices. When designing with the PCF8545BTT, ensure the SPI bus speed does not exceed the 5 MHz maximum and that the OSC pin capacitor selection matches the desired frame frequency. The /RES pin must be toggled during power-up to place the device into a known state before any SPI transactions begin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, including EOL context and pin-compatible upgrade options for the PCF8545BTT family.
TAS5830RHBR - 2x50W Digital Input Class-D Amp | Texas Instruments
The Texas Instruments TAS5830RHBR is a digital input stereo high-efficiency closed-loop Class-D audio amplifier with an advanced Class-H algorithm to improve system efficiency and reduce heat without clipping distortion. It delivers 2x50W output power into a 4-ohm load, making it ideal for high-performance audio applications such as soundbars, home theater systems, and active speakers. The device operates from a wide supply voltage range and features a digital I2S input interface, eliminating the need for external DACs and simplifying system design. A Class-D audio amplifier is a switching amplifier that uses pulse-width modulation (PWM) to drive the output stage, achieving high efficiency (typically >85%) compared to linear amplifiers. The TAS5830RHBR integrates a closed-loop feedback architecture that reduces distortion and improves power supply rejection, ensuring high-fidelity audio reproduction. The Class-H algorithm dynamically adjusts the supply voltage to the output stage, further enhancing efficiency and reducing heat dissipation, which is critical for compact consumer electronics. Key features include a digital input interface (I2S), integrated closed-loop feedback, advanced Class-H algorithm, and high output power of 2x50W into 4 ohms. The device also supports multiple output configurations and includes comprehensive protection features such as overcurrent, overtemperature, and undervoltage lockout. The RHB package (VQFN-32) provides excellent thermal performance, enabling reliable operation in space-constrained designs. Technically, the TAS5830RHBR uses a high-performance digital audio processor that supports sample rates up to 192 kHz and 24-bit resolution. The closed-loop architecture ensures low total harmonic distortion (THD) and high signal-to-noise ratio (SNR), meeting the demands of high-end audio systems. The device also features a programmable gain and multiple I2C control options, allowing designers to optimize performance for specific applications. Typical applications include soundbars, home theater receivers, active speakers, and automotive audio systems. The digital input simplifies connection to digital audio sources, while the high efficiency reduces the need for large heatsinks, enabling compact product designs. When designing with the TAS5830RHBR, ensure proper PCB layout with adequate ground planes and thermal vias to manage heat dissipation. The device requires a well-regulated power supply and careful attention to output filter design to minimize EMI and ensure stable operation.