마이크로컨트롤러

제품 (20,000+)

PIC12F510-I/MC - 8-bit MCU, 1.5KB Flash, 8MHz, DFN-8 | Microchip
PIC12F510-I/MC

PIC12F510-I/MC - 8-bit MCU, 1.5KB Flash, 8MHz, DFN-8 | Microchip

The Microchip Technology PIC12F510-I/MC is an 8-bit PIC RISC flash microcontroller with 1.5 KB of program memory, 38 bytes of RAM, and 64 bytes of EEPROM, packaged in a compact 8-pin DFN (3 mm x 2 mm) plastic lead-free housing. It operates from 2.0 V to 5.5 V and runs instructions at up to 8 MHz (4 MHz internal oscillator), delivering 1 MIPS of throughput while consuming only a few hundred microamperes active. According to the Microchip datasheet, the device integrates a 4-channel 8-bit ADC, two analog comparators, one 8-bit timer and one 16-bit timer, plus a watchdog timer for safe field deployment. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that fetches, decodes, and executes instructions from on-chip program memory. PIC microcontrollers from Microchip use a Harvard RISC architecture with separate program and data buses, and the PIC12F510 belongs to the baseline-friendly PIC12F family positioned between the PIC10F and PIC16F tiers. Within the broader taxonomy: microcontroller -> embedded controller -> semiconductor IC -> integrated circuit. PIC12F MCUs are typically deployed as glue logic, sensor front-ends, and low-power controllers in cost-sensitive applications. Key differentiating features include 1.5 KB self-programmable Flash, 38 bytes of SRAM, integrated 8-bit ADC with up to 4 input channels, dual on-chip comparators that can wake the core, internal 4 MHz oscillator that eliminates external crystals, and an automotive-grade AEC-Q100 qualification in this part variant. The DFN-8 (also called MC) package measures just 3 mm x 2 mm with an exposed thermal pad, making it one of the smallest Microchip PIC offerings and ideal for footprint-constrained PCB designs. Technically, the PIC12F510 uses a 12-bit instruction word with single-cycle execution on most instructions except branches, yielding an effective 2:1 code compression advantage over typical 8-bit CISC MCUs. The 4 MHz internal oscillator can be used directly or post-scaled to provide a system clock, and the watchdog timer uses its own dedicated internal RC for maximum reliability. Six general-purpose I/O pins (GP0-GP5) are multiplexed with ADC inputs and comparator I/O, and four of them support interrupt-on-change. Typical applications include AEC-Q100 automotive body controllers (window lifters, mirror controllers, RKE receivers), battery-powered sensor nodes, LED driver controllers, low-cost fan controllers, smoke detector front-ends, and simple appliance user-interface replacements for mechanical timers. The wide 2.0 V to 5.5 V operating range also supports single-cell Li-ion or two-AA-cell battery stacks without additional regulation. When designing with the PIC12F510, place a 100 nF decoupling capacitor within 2 mm of the VDD pin and connect the exposed pad (EP) directly to the ground plane for thermal relief and short-loop return paths. Because the device is in-circuit serial programmable (ICSP), reserve the ICSPCLK/ICSPDAT pins and add a programming header for production firmware loading. This page synthesizes distributor pricing, drop-in same-brand alternatives, and practical design notes not found in the manufacturer datasheet. Engineers get a parameter-by-parameter comparison and explicit cross-brand candidates where pin-compatible.

견적 요청 문의하기
PIC12F510-I/MS - 8-bit MCU, 1.5KB Flash, 8MHz, MSOP-8 | Microchip
PIC12F510-I/MS

PIC12F510-I/MS - 8-bit MCU, 1.5KB Flash, 8MHz, MSOP-8 | Microchip

The Microchip Technology PIC12F510-I/MS is a low-power, 8-bit CMOS Flash-based microcontroller in the PIC12 8-pin family, offering 1.5 KB (1K x 12 words) of Flash program memory, 41 bytes of RAM, and 63 bytes of data EEPROM in an 8-lead MSOP package. It executes instructions at up to 8 MHz (4 MHz internal RC), integrates a 4-channel 8-bit ADC and a comparator on-chip, and provides 6 general-purpose digital I/O pins for compact embedded designs. An 8-bit PIC microcontroller (MCU) is a single-chip computer built around an 8-bit data path that integrates a CPU core, non-volatile program memory (Flash/ROM), volatile working memory (RAM), non-volatile data storage (EEPROM), and configurable peripheral blocks (timers, ADC, comparators, communication peripherals). PIC12F-series MCUs sit at the ultra-small-pincount end of the PIC family (8 pins), targeting cost- and space-constrained applications such as LED drivers, sensor signal conditioning, battery chargers, and remote-control front ends where the 12-bit-wide instruction set delivers ~2:1 code density versus competing 8-bit cores. Key specifications include 1.5 KB Flash program memory, 41 bytes SRAM, 63 bytes EEPROM, an operating voltage range of 2.0 V to 5.5 V, and an industrial temperature range of -40 °C to +85 °C. The device integrates a high-performance RISC CPU with only 33 single-word/single-cycle instructions, an 8-bit timer/counter (TMR0), a watchdog timer, an 8-bit ADC with 4 input channels and 4 multiplexed channels, and one analog comparator. The MSOP-8 package provides a compact 3 x 3 mm footprint ideal for space-limited designs. Architecturally, the PIC12F510 is built on Microchip's baseline 8-bit core with a 12-bit instruction word, supporting direct, indirect, and relative addressing modes. The Flash memory supports in-circuit serial programming (ICSP) via two pins, enabling firmware updates after PCB assembly. The ADC uses successive-approximation register (SAR) conversion with software-selectable acquisition time, and the comparator offers programmable reference and output polarity. Power-saving features include a Sleep mode with wake-up on pin change and a clock-monitoring circuit. Typical applications include battery-powered sensor nodes, LED lighting controllers, small appliance controls, automotive interior lighting, fan/thermostat controllers, and consumer remote controls. The combination of integrated ADC, comparator, and EEPROM makes it well-suited for standalone analog signal conditioning without external components. When designing with this MCU, ensure decoupling caps of 0.1 µF are placed close to VDD, and reserve the ICSPDAT/ICSPCLK pins (typically GP0/GP1) for in-circuit programming unless they are also used in the final application. The internal 4 MHz oscillator provides ±1% accuracy after calibration and avoids the need for external crystals in most applications. This page synthesizes distributor pricing, drop-in PIC12 family alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC12F510-I/P - 8-bit Flash MCU, 1.5KB, 8MHz, 6 I/O | PDIP-8
PIC12F510-I/P

PIC12F510-I/P - 8-bit Flash MCU, 1.5KB, 8MHz, 6 I/O | PDIP-8

The Microchip Technology PIC12F510-I/P is an 8-bit Flash-based CMOS microcontroller in an 8-pin PDIP package, offering 1.5KB (1K x 12) of Flash program memory, 38 bytes of RAM, and 6 I/O pins. Operating at up to 8MHz internal oscillator across a 2.0V to 5.5V supply range, it targets cost-sensitive embedded applications requiring minimal board area and low power consumption via Microchip's nanoWatt technology. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and programmable I/O peripherals. Within the embedded hierarchy, the PIC12F510 sits in the low-pin-count 8-bit segment of Microchip's PIC® family, which is broadly classified as: microcontroller -> embedded controller -> semiconductor IC. The 8-bit PIC architecture uses a RISC-like Harvard structure with separate program and data buses, prioritizing deterministic instruction timing and code density for simple control tasks rather than raw throughput. Key features include a 33-instruction set, eight-bit timer with 8-bit prescaler, four-channel 8-bit A/D converter, watchdog timer with on-chip oscillator, in-circuit serial programming (ICSP), and an internal 4/8MHz oscillator that eliminates the need for an external crystal. Power management features include nanoWatt sleep modes drawing typical standby currents below 100 nA, making the device attractive for battery-powered sensor and consumer appliances. The PIC12F510 shares its silicon core and instruction set with the 14-pin PIC16F506, providing a migration path to additional I/O when board space allows. Code is generated using MPLAB X IDE with the free XC8 compiler, and debug is supported via optional header connections. Compared to discrete logic implementations, the device integrates timing, sensing, and glue logic on a single die, reducing PCB area, BOM count, and assembly cost. Typical applications include battery chargers, LED lighting controllers, small fan/thermostat controls, appliance user-interface replacement, and remote sensor transmitter nodes. The internal oscillator and integrated ADC allow complete system designs without external clock or signal-conditioning components. When designing with the PIC12F510, use the ICSP interface (VPP, ICSPCLK, ICSPDAT) on dedicated pins and reserve one I/O for the MCLR reset if hardware reset is required. Industrial-grade temperature rating (-40C to +85C) suits most indoor and protected-environment deployments; for harsher environments choose the -E or -T industrial/automotive variants. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes not consolidated on the manufacturer datasheet, enabling faster part selection and BOM risk analysis.

견적 요청 문의하기
PIC12F510-I/SN - 8-Bit Flash MCU, 1.5KB, 8MHz, 8-SOIC | Microchip
PIC12F510-I/SN

PIC12F510-I/SN - 8-Bit Flash MCU, 1.5KB, 8MHz, 8-SOIC | Microchip

The Microchip Technology PIC12F510-I/SN is an 8-bit PIC® mid-range Flash microcontroller in a 8-pin SOIC (SN) package, featuring 1.5KB (1K x 12) of Flash program memory, 41 bytes of RAM, and an 8MHz internal oscillator. It is rated for an industrial temperature range of -40C to +85C and operates from 2.0V to 5.5V across the PIC12F510 family. An 8-bit PIC microcontroller (PIC = Peripheral Interface Controller) is a Harvard-architecture RISC device that executes one instruction per clock cycle (except branches). The PIC10/12 family occupies the smallest-footprint tier of Microchip's 8-bit portfolio - it sits below PIC16 and PIC18 in memory/peripheral capability but offers the lowest unit cost and smallest PCB area, sucing applications where cost, simplicity and pin count dominate over raw performance. The PIC12F510 specifically belongs to the mid-range 14-bit instruction-word core family and integrates analog peripherals on-chip. Key features of the PIC12F510 include 6 general-purpose I/O pins, one 8-bit ADC with up to 4 input channels, an analog comparator, a 4-MHz internal RC oscillator (4 MHz CPU clock via 2:1 divider from 8 MHz oscillator), and an 8-bit timer/counter (TMR0). According to the manufacturer datasheet, the part supports in-circuit serial programming (ICSP) and code protection, and it draws a few hundred microamps active / sub-microamp sleep. Architecturally, the PIC12F510 uses a 14-bit instruction word, separate program and data buses (Harvard), and a 2-stage pipeline. The internal 8 MHz oscillator can be software-calibrated via the OSCCAL register to recover accuracy after calibration-register erasures. The device supports two oscillator modes (internal RC and external clock) and offers power-managed sleep with wake-on-change I/O. Typical applications include low-cost consumer appliances, LED lighting controllers, battery chargers, remote-control transmitters, and simple sensor interface boards. The combination of an on-chip ADC, comparator and 6 I/O in an 8-pin package makes the PIC12F510 well suited for replacing discrete logic in space-constrained designs. When designing with the PIC12F510, ensure the ICSP clock (PGC) and data (PGD) pins are accessible on the PCB for in-system programming. For battery-powered designs, leverage the device's sleep modes (sub-1 uA typical) and use the internal weak pull-ups to reduce external component count. This page synthesizes distributor pricing, drop-in same-package alternatives, and engineering design notes not aggregated on any single distributor page, helping procurement and design engineers evaluate the PIC12F510-I/SN for cost-sensitive 8-bit embedded designs.

견적 요청 문의하기
PIC12F510T-I/MC - 8-Bit MCU, 1.5KB Flash, 8MHz, 8-DFN | Microchip
PIC12F510T-I/MC

PIC12F510T-I/MC - 8-Bit MCU, 1.5KB Flash, 8MHz, 8-DFN | Microchip

The Microchip Technology PIC12F510T-I/MC is an 8-bit RISC Flash microcontroller in the PIC12 family, featuring 1.5KB (1K x 12) of Flash program memory, 38 bytes of SRAM, and 64 bytes of EEPROM data memory, all integrated into a compact 8-pin DFN (2x3 mm) package. It operates at up to 8 MHz from a 2.0V to 5.5V supply and integrates a 4-channel 8-bit ADC, one analog comparator, and a hardware timer with capture/compare/PWM capability. An 8-bit PIC microcontroller is a compact, deterministic Harvard-architecture MCU built around a reduced instruction set (RISC) core. The PIC12 family sits at the low-end of Microchip's PIC line: microcontrollers -> 8-bit microcontrollers -> PIC microcontroller -> PIC12 family -> PIC12F subfamily (Flash-based, small-pin-count). The PIC12F510T-I/MC belongs to this Flash-programmable 8/14-pin subfamily targeting cost-sensitive, space-constrained designs. Key features include 33 single-word instructions, 8-level hardware stack, four ADC channels with 8-bit resolution, one on-chip comparator with programmable reference, an 8-bit timer with 8-bit prescaler, and ultra-low-power sleep mode drawing microamp-level current. The internal 4 MHz RC oscillator and optional 8 MHz internal clock eliminate the need for external crystals in many applications, reducing BOM cost and PCB footprint. Typical applications include battery-powered sensor nodes, LED drivers, simple motor control, battery chargers, and consumer appliance interfaces. The compact 8-DFN package and wide operating voltage range make the PIC12F510T-I/MC well-suited for handheld and portable products where PCB area is at a premium. When designing with this device, allocate sufficient bypass capacitance (0.1 uF ceramic) close to VDD, and note that the I/MC package uses 8-DFN with an exposed pad (EP) that should be soldered to the ground plane for thermal dissipation. Programming is performed via ICSP (In-Circuit Serial Programming) on the GP0/GP1 pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC12F510T-I/MS - 8-Bit 8MHz PIC12 MCU, 1.5KB FLASH | Microchip
PIC12F510T-I/MS

PIC12F510T-I/MS - 8-Bit 8MHz PIC12 MCU, 1.5KB FLASH | Microchip

The Microchip Technology PIC12F510T-I/MS is an 8-bit PIC12-family RISC microcontroller IC offering 8MHz maximum clock speed, 1.5KB (1K x 12) of Flash program memory, and 38 bytes of data RAM, supplied in an 8-pin MSOP package with tape-and-reel packaging. The suffix T indicates tape-and-reel delivery, I indicates the industrial -40C to +85C operating temperature range, and MS denotes the 8-MSOP plastic surface-mount package. Six general-purpose I/O pins are available for application use, along with an integrated 8MHz internal oscillator that reduces bill-of-material cost by eliminating external clock hardware. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data RAM, and programmable I/O peripherals. The PIC12F510 belongs to the baseline 12-bit instruction-word PIC10/12 family, sitting in the broader 8-bit MCU category which also includes 8051 and AVR architectures. Within Microchip's portfolio, the PIC12 sub-family targets small-form-factor, low-pin-count, cost-sensitive embedded applications where 6-8 I/O pins and 1-3KB of code space are sufficient. The PIC12F510 specifically occupies the entry-level position designed for ultra-low-cost analog and digital control replacing discrete logic or electromechanical timers. Key features include 1.5KB self-programmable Flash (in-circuit serial programming via ICS), 38 bytes SRAM, a 4-channel 8-bit ADC with internal voltage reference, one 8-bit timer (TMR0), one watchdog timer with separate oscillator, and an internal 4MHz/8MHz precision oscillator. Power consumption is optimized for battery operation, with operating voltage from 2.0V to 5.5V (typical 2.5V/3.3V/5V rails supported), brown-out reset protection, and an extended instruction set capable of executing most instructions in a single 200ns cycle at 20MHz external. The PIC12F510 uses a Harvard RISC architecture with separate program and data buses. Its 12-bit instruction word (33 single-word instructions, mostly single-cycle) and 2-stage pipeline deliver deterministic interrupt latency - typically 200ns at 8MHz. The integrated 4MHz/8MHz RC oscillator is factory calibrated to +/-1% accuracy across temperature and voltage, removing the need for external crystals in cost-sensitive applications and shrinking PCB footprint. An on-chip debug module is not present; developers use ICSP for programming and a debug header is optional. Typical applications include ultra-low-cost consumer appliances, LED lighting controllers, simple sensor interfaces, battery chargers, IR remote control transmitters, smart toys, and replacement of discrete logic/timer circuits. The wide 2.0V to 5.5V supply range supports single-cell Li-ion (3.7V nominal), two-cell AA, and 5V regulated rails. Industrial temperature rating and small MSOP-8 footprint also suit automotive interior and harsh-environment sensor nodes. When designing with the PIC12F510, ensure your code fits within the 1K-instruction Flash and 38-byte RAM budget - compile-time checks for stack depth and RAM bank usage are critical because the device lacks a hardware stack overflow indicator. Decouple VDD with a 100nF ceramic capacitor close to the pin, and route GP3/MCLR through a 10k pull-up unless using the internal MCLR disable fuse. Unlike newer PIC16F1xxx parts, the PIC12F510 has no CWG/NCO/CLC peripherals, so waveform generation and arithmetic-heavy tasks may require the newer PIC12F1501 or PIC16F15313 (the suggested migration per Microchip). This page synthesizes distributor pricing, drop-in Microchip alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC12F519-E/MC - 8-Bit Flash MCU, 1.5KB, 4MHz, DFN-8 | Microchip
PIC12F519-E/MC

PIC12F519-E/MC - 8-Bit Flash MCU, 1.5KB, 4MHz, DFN-8 | Microchip

The Microchip PIC12F519-E/MC is a low-cost, high-performance 8-bit Flash-based CMOS microcontroller in an 8-pin DFN (3x2 mm) package, featuring a RISC core with 33 single-word/single-cycle instructions running at up to 8 MHz (4 MHz factory default) with a 500 ns instruction cycle. It integrates 1.5 KB of Flash program memory, 64 bytes of Flash data EEPROM, and 41 bytes of SRAM, supported by 6 I/O pins. The device operates from 2.0V to 5.5V across the extended -40C to +125C industrial temperature range. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals onto one die, typically targeted at cost-sensitive embedded control tasks. Within the product hierarchy, the PIC12F519 belongs to the PIC10/12 family of baseline and mid-range 8-bit microcontrollers -> microcontrollers -> embedded processors -> integrated circuits -> semiconductors. The '12-bit wide instruction set' is a Microchip hallmark offering 2:1 code density over 8-bit instruction MCUs from competitors, and the device also carries the legacy PIC12C5xx core, making it familiar to long-time PIC users. Key features include an internal 4 MHz factory-calibrated oscillator with software-selectable LF (31 kHz) and HF (8 MHz) modes, an 8-bit real-time clock/counter (TMR0) with 8-bit prescaler, a Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation, and ultra-low-power nanoWatt technology with power-managed sleep and wake-up modes. Code protection, Power-on Reset (POR), and Brown-out Reset (BOR) are built in, and in-circuit serial programming (ICSP) is supported via two pins. The PIC12F519 uses a Harvard RISC architecture with separate program and data buses, providing deterministic single-cycle instruction execution. Its peripheral set is intentionally minimal—PORTA with six GPIO pins, an 8-bit timer, and an analogue comparator selectable on GP0/GP1/GP2—optimised for compact glue-logic replacement and battery-powered applications rather than high-throughput DSP tasks. Typical applications include battery chargers, smart sensors, appliance controls, LED drivers, low-end remote controls, and small motor controllers. The extended temperature range also supports industrial monitoring nodes and automotive body electronics (non-safety). It fits particularly well where PIC12C508/PIC12C509 firmware is already deployed and a Flash-based migration is desired. When designing with this device, allocate I/O pins carefully because only 6 of the 8 package pins are usable as GPIO; the remaining 2 are VDD/VSS. Place a 0.1 uF decoupling capacitor as close to the VDD pin as the DFN-8 land pattern allows, and follow Microchip's recommended ICSP layout for in-circuit programming access. This page consolidates manufacturer specification data, distributor pricing as of 2026-09-15, a side-by-side drop-in compatibility table against PIC12F510/PIC12F509/PIC12F1822 family parts, and practical design guidance not found in the standalone datasheet.

견적 요청 문의하기
PIC12F519-E/MS - 8-bit 8MHz 1.5KB Flash MCU 8-MSOP | Microchip
PIC12F519-E/MS

PIC12F519-E/MS - 8-bit 8MHz 1.5KB Flash MCU 8-MSOP | Microchip

The Microchip Technology PIC12F519-E/MS is an 8-bit, fully-static, Flash-based CMOS RISC microcontroller in an 8-pin MSOP package. It runs at up to 8 MHz instruction rate and integrates 1.5 KB (1K x 12) of Flash program memory plus 64 bytes of RAM, making it a compact, low-cost solution for pin-constrained embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and configurable peripherals around a shared bus. The PIC12F519 belongs to the PIC12F family of baseline and mid-range 8-bit PIC microcontrollers, which sit under the broader PIC microcontroller umbrella and ultimately the Microcontroller (MCU) -> Microcomputer -> Embedded Computing product hierarchy. nanoWatt power-management technology gives the PIC12F519 deep sleep and active-clock modes, allowing the device to draw microamps in standby, which is critical for battery-powered IoT sensors and remote controls. Key differentiating features include 33 single-word/single-cycle RISC instructions, 8 MHz internal oscillator, 6 general-purpose I/O pins shared with peripheral functions, 8-bit timer with watchdog, and an enhanced Flash program memory that supports in-circuit serial programming (ICSP). The PIC12F519 is specified for 2.0V to 5.5V operation across -40C to +125C (E temperature grade), enabling use in both consumer and industrial environments. The PIC12F519 is built on a baseline RISC core with single-cycle instruction execution and hardware multiply support, achieving deterministic interrupt latency. The integrated 8 MHz internal oscillator eliminates the need for external resonators on low-cost boards, while the ICSP interface enables field updates without removing the device. Typical applications include consumer remote controls, LED lighting controllers, low-end sensor nodes, appliance user interfaces, security PIR subsystems, and general-purpose logic-replacement boards where a few smart pins replace discrete logic. When designing with the PIC12F519-E/MS, leave one pin dedicated to ICSP programming (typically GP1/GP0) and pay attention to the absolute maximum VDD of 5.5V. Use the WDT and Brown-out Reset features to harden firmware in electrically noisy environments, and consult Microchip's nanoWatt design notes to minimize average current for battery applications. This page synthesizes Microchip datasheet parameters, current distributor pricing (as of 2026-09-15), drop-in MSOP-8 alternatives, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC12F519-E/P - 8-bit 8MHz Flash MCU 1.5KB | Microchip
PIC12F519-E/P

PIC12F519-E/P - 8-bit 8MHz Flash MCU 1.5KB | Microchip

The Microchip Technology PIC12F519-E/P is an 8-bit, fully-static, Flash-based CMOS microcontroller in an 8-pin PDIP package, designed for low-cost, high-performance embedded applications. It features a 33-instruction RISC architecture executing one instruction per clock cycle at 8 MHz, 1.5 KB of Flash program memory (1K x 14), 64 bytes of RAM, and 64 bytes of EEPROM data memory. The part operates from 2.0V to 5.5V across an industrial temperature range of -40C to +125C. An 8-bit microcontroller (MCU) is a small computer-on-a-chip built around a CPU with an 8-bit data bus, embedded Flash/ROM for program storage, RAM for data, and integrated peripherals such as timers, ADCs, and communication ports. MCUs sit hierarchically inside microcontrollers -> embedded processors -> semiconductor ICs, and they form the lowest tier of programmable computing hardware used in mass-market embedded systems. Key features of the PIC12F519 include a precision internal 8 MHz oscillator with software-selectable calibration, six general-purpose I/O pins, one 8-bit and one 16-bit timer, a watchdog timer with its own on-chip RC oscillator, and Microchip's nanoWatt technology for ultra-low power consumption. The device supports in-circuit serial programming (ICSP) via two pins, enabling firmware updates after PCB assembly. Architecturally, the PIC12F519 uses a Harvard RISC core with separate program and data buses, allowing instruction fetch and operand access to occur simultaneously. This single-cycle execution model, combined with deterministic timing, makes it well suited to real-time control loops and interrupt-driven firmware architectures commonly required in cost-sensitive industrial and consumer products. Typical applications include LED drivers and lighting control, battery chargers, low-end motor control, remote controls, sensor signal conditioning, and small appliance controls. The wide 2.0V-5.5V supply range and nanoWatt sleep modes make it a strong fit for battery-powered and energy-harvesting designs where quiescent current directly determines operating life. When designing with the PIC12F519, engineers should note that the internal oscillator is factory calibrated but offers ±1% (typical) accuracy; designs requiring tight UART baud-rate tolerance may need an external crystal. The ICSP pins (GP0/GP1) double as general I/O and must be considered when allocating pin functions. This page synthesizes current distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond what is printed in the manufacturer datasheet, giving procurement and engineering teams a single decision-ready reference.

견적 요청 문의하기
PIC12F519-E/SN - 8-bit Flash MCU 1.5KB 8MHz SOIC-8 | Microchip
PIC12F519-E/SN

PIC12F519-E/SN - 8-bit Flash MCU 1.5KB 8MHz SOIC-8 | Microchip

The Microchip Technology PIC12F519-E/SN is an 8-bit, fully-static, Flash-based CMOS microcontroller in an 8-pin SOIC package, delivering 8 MHz instruction execution from a RISC core with 33 single-word/single-cycle instructions. The device integrates 1.5 KB of Flash program memory (1K x 12 words), 64 bytes of RAM, and a 64-byte non-volatile EEPROM-like data area accessible through the standard PIC12 instruction set, making it a cost-optimized mid-tier PIC10/12 baseline part. A PIC microcontroller is a RISC-based, Harvard-architecture 8-bit or 16-bit microprocessor core, a microcontroller category that sits within the broader semiconductor hierarchy of embedded controllers -> microcontrollers -> microprocessors -> integrated circuits. The PIC12F519 belongs to the PIC12 baseline/mid-range family, the smallest-footprint 8-bit Flash sub-family of Microchip's PIC portfolio, optimized for low-cost, pin-constrained applications where a handful of I/O lines, an internal oscillator, and nanoWatt sleep modes are sufficient. Key features include an internal 4 MHz or 8 MHz RC oscillator (no external crystal required for most designs), six general-purpose I/O pins, an 8-bit timer/counter (TMR0) with programmable prescaler, a watchdog timer with its own on-chip RC oscillator for reliable operation, and a wide operating voltage range of 2.0 V to 5.5 V. The device draws typical sleep currents under 1 µA at 2 V thanks to nanoWatt technology, and the E temperature grade extends the operating range from -40 °C to +125 °C for industrial environments. The PIC12F519 uses a Harvard architecture with separate program and data buses, an 8-bit ALU, and a 12-bit instruction word. The Flash program memory is in-system programmable through ICSP, allowing firmware updates in the field. A 64-byte data EEPROM area is emulated in Flash with self-programming support, plus the device integrates a high-endurance Flash write capability and on-chip brown-out reset and power-on reset for robust startup. The PIC12F519T tape-and-reel variants share the same silicon and pinout as the -E/SN. Typical applications include low-cost consumer appliances, LED lighting controllers, battery-powered sensor nodes, simple motor/relay controllers, IR remote transmitters, and replacement of discrete logic in space-constrained designs. The small 8-pin SOIC footprint, six I/O lines, and internal oscillator make the PIC12F519 a frequent choice where board area and BOM cost dominate. When designing with this device, ensure decoupling capacitors are placed close to VDD/VSS, and reserve GP3 for input-only use (it lacks an output driver). The E grade variant supports industrial temperature range; choose the I grade for commercial-only 0-85 °C, or PIC12F519T tape-and-reel variants for high-volume pick-and-place assembly.

견적 요청 문의하기
PIC12F519-I/MC - 8-Bit Flash MCU, 8MHz, 1.5KB | Microchip
PIC12F519-I/MC

PIC12F519-I/MC - 8-Bit Flash MCU, 8MHz, 1.5KB | Microchip

The Microchip PIC12F519-I/MC is a low-cost, high-performance, 8-bit, fully-static, Flash-based CMOS microcontroller packaged in an 8-pin DFN (2x3 mm) with exposed pad (MC suffix). It executes 33 single-word, single-cycle RISC instructions at up to 8 MHz internal oscillator speed and integrates 1.5 KB (1K x 12) of Flash program memory plus 64 bytes of EEPROM data memory. Six general-purpose I/O pins support digital I/O, analog comparator, and on-chip peripherals. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path. Within the broader taxonomy it belongs to: microcontroller -> embedded microcontroller -> 8-bit microcontroller -> Flash-based MCU -> PIC12F family. Microcontrollers combine a CPU, non-volatile program memory, RAM, and peripherals on a single die, allowing them to replace discrete logic in cost-sensitive embedded applications. The PIC12F519 is optimized for pin- and code-efficient control tasks in consumer, industrial, and appliance products. Key features include an internal 8 MHz oscillator with 4x PLL option, 41-byte data RAM, a 8-bit timer (TMR0) with 8-bit programmable prescaler, a watchdog timer with on-chip RC oscillator, an analog comparator, and a wide 2.0V to 5.5V operating supply range. The device also supports in-circuit serial programming (ICSP) via GP0 and GP1, allowing firmware updates after PCB assembly. The PIC12F519 uses a Harvard-class RISC architecture with separate program and data buses, allowing instruction fetch and operand access in the same cycle. Its CMOS design with nanoWatt technology minimizes active and sleep-mode current, suiting battery-powered applications where quiescent draw is critical. Typical applications include LED lighting controllers, battery chargers, remote-control transmitters, smart sensors, small appliance controls, and low-pin-count IoT edge nodes. The wide voltage range (2.0V to 5.5V) and integrated peripherals let designers build complete products with minimal external components. When designing with this device, allocate at least two pins (GP0 and GP1) for ICSP if you plan in-field firmware updates. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the pin. For low-power applications, use the sleep mode and watchdog timer to achieve quiescent currents below 1 uA. This page synthesizes distributor pricing, drop-in alternatives from the PIC12 family, application guidance, and design considerations not found in the manufacturer datasheet alone, helping engineers select the right 8-bit MCU for compact embedded designs.

견적 요청 문의하기
PIC12F519-I/MS - 8MHz 8-Bit Flash MCU | Microchip
PIC12F519-I/MS

PIC12F519-I/MS - 8MHz 8-Bit Flash MCU | Microchip

The Microchip Technology PIC12F519-I/MS is an 8-bit, fully static, Flash-based CMOS microcontroller with an 8 MHz internal operating speed, 1.5 KB of Flash program memory organized as 1K x 12 words, and an 8-pin MSOP package. It is designed for compact embedded-control applications that require low-cost microcontroller operation, flexible I/O, and a small board footprint. A microcontroller is a programmable semiconductor device that combines a CPU core, memory, digital I/O, and embedded control peripherals on one integrated circuit. The PIC12F519 belongs to the PIC12 family of 8-bit RISC microcontrollers. Its compact 8-pin MSOP package is useful for space-constrained products, while Flash memory supports in-circuit programming and firmware updates compared with older ROM-based or one-time-programmable devices. The PIC12F519-I/MS uses only 33 single-word, single-cycle instructions, with program branches taking two cycles. It supports direct, indirect, and relative addressing modes for data and instructions, and includes a two-level hardware stack. These features make the device suitable for simple control logic, sensor interfaces, status indicators, and low-to-moderate processing tasks where deterministic execution and low component count are more important than high processing throughput. The device is specified for an 8 MHz internal clock and includes 1.5 KB of Flash program memory. Microchip describes the PIC12F519 as a low-cost, high-performance, fully static Flash-based CMOS MCU. Its architecture emphasizes compact code density and simple application development, while its eight-pin package limits the available I/O count compared with larger PIC devices. Typical uses include building automation controllers, compact sensor nodes, appliance control boards, LED-status controllers, battery-operated accessories, and small industrial monitoring modules. The small MSOP-8 package also enables compact products where PCB area is constrained, although designers should account for the limited number of pins and verify the required communications, analog, and timing functions against the manufacturer pin description. When laying out a PCB, follow the manufacturer package drawing and pin-description tables exactly. Confirm oscillator, programming, reset, supply, and I/O requirements before committing the footprint, and provide the decoupling and programming access specified by the device documentation. Firmware validation should include startup behavior, oscillator configuration, brownout conditions, and all used I/O states. This page organizes the PIC12F519-I/MS specifications, sourcing information, package details, application guidance, and verified same-package replacement candidates into one engineering-focused reference for embedded product development.

견적 요청 문의하기
PIC12F519-I/P - 8MHz 8-bit Flash MCU, 1.5KB | Microchip
PIC12F519-I/P

PIC12F519-I/P - 8MHz 8-bit Flash MCU, 1.5KB | Microchip

The Microchip PIC12F519-I/P is a low-cost, high-performance, 8-bit, fully-static, Flash-based CMOS microcontroller housed in an 8-pin PDIP (P) through-hole package. It integrates 1.5KB (1K x 12) of Flash program memory, 64 bytes of RAM, and 64 bytes of EEPROM-style data Flash, and runs the PIC12 instruction set at up to 8 MHz across an industrial temperature range. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip that combines a CPU, program memory, data memory, and configurable I/O peripherals in a single IC. The PIC12F519 belongs to the PIC12 family of microcontrollers, itself part of the broader Microchip PIC microcontroller hierarchy (8-bit PIC -> PIC10/12/16/18 family -> Microcontroller -> Embedded IC -> Semiconductor). These MCUs are widely used as glue logic, sensor conditioners, and standalone control processors in cost-sensitive designs. Key differentiating features include an internal 8 MHz oscillator (no external crystal required), 6 general-purpose I/O pins with individual direction control, a watchdog timer, power-on reset, brown-out detect, and an 8-bit timer/counter with a 3-bit prescaler. The device also includes a 4-channel 8-bit Analog-to-Digital Converter (ADC) and supports in-circuit serial programming (ICSP) via two pins, allowing firmware updates after PCB assembly. Architecturally, the PIC12F519 employs a RISC-based processor with only 33 single-word, single-cycle instructions, enabling predictable deterministic execution and small code size. The Harvard-style separate program and data buses eliminate fetch-execute contention, and the CMOS process delivers low quiescent current for battery-powered applications. Typical applications include LED blink/chaser controllers, small fan or motor PWM drivers, sensor signal-conditioning front-ends, simple user-interface controllers (button + LED), and replacement of discrete logic in consumer appliances. The wide 2.0 V to 5.5 V operating range and integrated peripherals reduce external component count and BOM cost. When designing with this part, allocate at least one I/O pin to the ICSP programming interface (typically GP0/GP1) and reserve sufficient Flash headroom for field firmware updates. The internal oscillator eliminates external crystal cost but offers reduced accuracy (typically +/- 2% over temperature); use the calibration word for precise timing requirements. This page synthesizes distributor pricing, drop-in PIC12 family alternatives, and practical design notes not consolidated on a single manufacturer page, giving engineers a one-stop reference for sourcing and second-source decisions.

견적 요청 문의하기
PIC12F519-I/SN - 8-bit 8MHz 1.5KB Flash MCU | Microchip
PIC12F519-I/SN

PIC12F519-I/SN - 8-bit 8MHz 1.5KB Flash MCU | Microchip

The Microchip Technology PIC12F519-I/SN is an 8-bit, 8-pin baseline Flash microcontroller IC with 1.5KB (1K x 12) of program Flash memory, 64 bytes of non-volatile Flash data memory, and a precision 4/8 MHz internal oscillator, housed in an 8-SOIC package. It operates across a 2.0V to 5.5V supply voltage range, making it suitable for both 3.3V and 5V systems. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, RAM, non-volatile program memory, and peripherals into a single IC. The PIC12F519 belongs to Microchip's baseline core architecture (33 instructions, 2 stack levels, 12-bit wide instructions, 8-bit wide data path) - the simplest tier in the PIC family hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Baseline PICs target cost-sensitive applications where cycle efficiency and minimum instruction count outweigh raw throughput. Key features include 6 I/O pins capable of 25 mA source/sink, an integrated watchdog timer (WDT), one 8-bit timer (TMR0), an 8 MHz precision internal oscillator (4 MHz default), and a low-power 100 nA sleep current. The device offers In-Circuit Serial Programming (ICSP) for field updates and code protection to safeguard intellectual property. 1.5KB of Flash supports modest firmware payloads typical of sensor interfaces, simple state machines, and glue-logic replacement. The PIC12F519's architecture is built around a Harvard-style design with separate program and data buses, enabling single-cycle instruction execution except for branches (2 cycles). This deterministic execution, combined with the baseline core's compact instruction set, simplifies code generation in assembly and C (XC8 compiler). The non-volatile Flash data memory (64 bytes) provides persistent storage for calibration constants or serial numbers without external EEPROM. Typical applications include battery-powered sensor nodes, household appliance control, LED driver replacement circuits, simple PWM fan controllers, and automotive interior accessories (sub-systems). The wide 2.0-5.5V range supports direct battery or USB-derived power rails without additional regulation. When designing with this part, ensure decoupling capacitors (100 nF typical) are placed close to VDD and that the ICSP programming pins are accessible. The internal 8 MHz oscillator eliminates external crystal cost but offers less frequency precision than an external crystal; for UART timing-sensitive applications, verify baud-rate error margins. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet - offering engineers a complete sourcing and selection reference.

견적 요청 문의하기
PIC12F519T-I/MC - 8-Bit Flash MCU, 1.5KB, 8MHz, DFN-8 | Microchip
PIC12F519T-I/MC

PIC12F519T-I/MC - 8-Bit Flash MCU, 1.5KB, 8MHz, DFN-8 | Microchip

The Microchip Technology PIC12F519T-I/MC is an 8-bit, fully-static, Flash-based CMOS microcontroller built on a RISC architecture with 33 single-word instructions, packaged in an 8-pin DFN (2x3 mm) with exposed pad. The device delivers 8 MIPS throughput from a 4 MHz internal oscillator (or 8 MHz when clocked from an external source), 1.5 KB of Flash program memory (1K x 12 words), 41 bytes of data RAM, and 64 bytes of non-volatile Flash data EEPROM. Six general-purpose I/O pins source or sink up to 25 mA each, making the part well suited to drive LEDs, opto-couplers, and small relays directly without buffer transistors. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data RAM, peripherals, and I/O on one die. The PIC12 baseline family occupies the cost-and-pincount-optimized tier of the MCU hierarchy: 8-bit CPU -> PIC10/12 baseline -> Flash MCU -> microcontroller -> embedded computing -> semiconductor. The 12-bit-wide instruction word and 8-bit data path keep the core small, low power, and inexpensive - ideal for high-volume cost-sensitive applications. The PIC12F519T-I/MC operates from 2.0 V to 5.5 V across the industrial -40 C to +85 C range. Key features include a precision 4/8 MHz internal oscillator, an 8-bit Timer0 with 8-bit prescaler, a Watchdog Timer with on-chip RC oscillator for failsafe operation, an In-Circuit Serial Programming (ICSP) interface, and 100 nA typical sleep current for battery-backed designs. The internal oscillator eliminates two external crystals versus competing MCU families, reducing BOM cost and PCB area. Typical applications for the PIC12F519T-I/MC include low-cost remote controls, PIR motion-sensor signal conditioning, fan/light controllers, battery-powered sensor nodes, RGB LED color-mixing drivers, and small appliance user-interface boards. The combination of 1.5 KB Flash and six high-current I/O makes it well matched to compact state-machine designs where a 32-bit Cortex-M0 would be over-spec and over-priced. When designing with this part, leave the ICSP pins free for in-circuit programming or fit a 2x3 header. A 100 nF decoupling capacitor within 5 mm of VDD and a 10 kohm pull-up on MCLR are recommended. Bulk capacitance on VDD is usually unnecessary because the core draws microamps in sleep.

견적 요청 문의하기
PIC12F609-E/MD - 8-Bit MCU, 1.75KB Flash, 20MHz | Microchip
PIC12F609-E/MD

PIC12F609-E/MD - 8-Bit MCU, 1.75KB Flash, 20MHz | Microchip

The Microchip Technology PIC12F609-E/MD is an 8-bit PIC microcontroller from the PIC12F family, featuring 1.75KB (1K x 14) of Flash program memory, 64 bytes of RAM, and a 20MHz instruction-cycle oscillator. It is housed in an 8-pin DFN (4x4 mm) exposed-pad package with 5 user I/O pins and operates across an extended industrial temperature range (-40C to +125C). The device belongs to Microchip's mid-range 14-bit instruction-set PIC12 core family with internal oscillator support. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash program memory, peripherals, and I/O on a single die. MCUs are the smallest building blocks of embedded systems, sitting hierarchically below microprocessors (MPUs) and above simple digital logic. The PIC12F609 sits within Microchip's PIC12F sub-family of 8-pin flash-based devices, which are widely used in cost-sensitive, low-pin-count applications such as appliance control, sensor signal conditioning, and battery-powered products. Key features of the PIC12F609 include a Harvard RISC architecture with 14-bit instructions and 8-bit data path, an internal 4MHz/8MHz oscillator (calibrated to +/-1%), a comparator module, an 8-bit timer (Timer0 with 8-bit prescaler), a 16-bit timer (Timer1), and a watchdog timer with its own on-chip RC oscillator. The device supports in-circuit serial programming (ICSP) via two pins, allowing firmware updates after PCB assembly. The extended (-E) temperature grade supports -40C to +125C operation. Typical applications include low-cost PIC12F609-based designs such as LED drivers, fan controllers, simple sensor interfaces, remote-control transmitters, and automotive accessory modules where the AEC-Q100 grade and small 8-pin DFN package suit harsh environments. With 5 user I/O and a comparator, the chip is well suited to battery chargers, simple PWM controllers, and timer/replacement circuits. When designing, ensure the exposed pad (EP) is soldered to the PCB ground plane for thermal dissipation. The 8-pin DFN footprint is not breadboard-friendly; consider PIC12F609-I/P or PIC12F609-I/SN for through-hole prototyping. This page synthesizes distributor pricing, AEC-Q100 grade details, and verified drop-in alternatives not aggregated on the manufacturer product page.

견적 요청 문의하기
PIC12F609-E/MF - 8-Bit MCU, 1.75KB Flash, 6 I/O | Microchip
PIC12F609-E/MF

PIC12F609-E/MF - 8-Bit MCU, 1.75KB Flash, 6 I/O | Microchip

The Microchip Technology PIC12F609-E/MF is an 8-bit Flash-based CMOS microcontroller delivering 1.75KB of program memory and 64 bytes of RAM in an 8-pin DFN exposed-pad package. The device features an internal 8MHz oscillator, supports operation from 2.0V to 5.5V, and provides 5-6 general-purpose I/O pins plus one input-only pin depending on configuration. It belongs to the PIC12 mid-range core family and is targeted at cost- and space-constrained embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals onto one silicon die. The PIC12 family sits in Microchip's mid-range architecture tier, between the baseline 8-bit PIC10/16 cores and the enhanced 16-bit PIC24/dsPIC families. Within the broader taxonomy, MCUs belong to microcontrollers -> embedded processors -> digital ICs -> semiconductors. The PIC12F609 specifically targets applications needing small package count, internal oscillator accuracy, and minimal BOM cost. Key features include 1.75KB (1K x 14) Flash program memory, 64 x 8 RAM, hardware peripherals such as Brown-out Detect/Reset (BOR) and Power-on Reset (POR), an 8-bit timer (TMR0) and a 16-bit timer (TMR1), a comparator module, and a 10-bit ADC (shared with comparator input on adjacent pins). The internal 8MHz oscillator eliminates the need for an external crystal, reducing system cost and board area. The device supports in-circuit serial programming (ICSP) and in-circuit debugging via two dedicated pins. The PIC12F609 uses a RISC architecture with only 35 instructions, enabling deterministic single-cycle execution (except branches). The wide 2.0V-5.5V supply range supports both 3.3V and 5V system designs, and the DFN-8 package with exposed pad offers low thermal resistance in compact layouts. Low-power features include nanoWatt technology with sleep currents below 1 microamp, plus multiple oscillator modes for active-vs-standby current trade-offs. Typical applications include LED lighting controllers, small appliance control, battery chargers, sensor signal conditioning, automotive body electronics (using the automotive-qualified PIC12F609T-I/MF variant), and consumer remote-control encoders. The combination of small pin count and integrated peripherals also suits smart IoT edge nodes and wearables. When designing with this MCU, ensure the ICSPDAT and ICSPCLK pins are not pulled low at reset to enter programming mode unintentionally, and follow Microchip's AC/DC input-output layout guideline for the comparator/ADC shared pins to avoid digital switching noise coupling into analog measurements. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not collected on any single manufacturer or distributor page, giving engineers a single starting point for PIC12F609 evaluation and sourcing.

견적 요청 문의하기
PIC12F609-E/MS - 1.75KB Flash 8-Bit MCU | Microchip 8-MSOP
PIC12F609-E/MS

PIC12F609-E/MS - 1.75KB Flash 8-Bit MCU | Microchip 8-MSOP

The Microchip Technology PIC12F609-E/MS is an 8-bit RISC PIC microcontroller in an 8-pin MSOP package, featuring 1.75 KB (1K x 14) of Flash program memory, 64 bytes of SRAM, and 6 general-purpose I/O pins. The device operates at clock frequencies up to 20 MHz across a supply range of 2.0 V to 5.5 V, with the -E (extended) temperature grade rated from -40 C to +125 C for industrial and harsh-environment use. The integrated 8 MHz internal oscillator eliminates the need for an external crystal on cost-sensitive and space-constrained designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and peripheral interfaces on one IC. The PIC12F609 belongs to the PIC12F family of mid-range 8-bit microcontrollers (PIC -> microcontroller -> embedded processor -> semiconductor), built on CMOS technology with a RISC instruction set optimized for deterministic execution and low power consumption. This architecture positions it between simple 8-pin PIC10 devices and larger PIC16/PIC18 parts. Key features of the PIC12F609-E/MS include 1.75 KB self-programmable Flash, an 8-channel 10-bit ADC, one 8-bit and one 16-bit timer, an enhanced PWM module, an analog comparator, and an internal 8 MHz oscillator with calibration. The part also offers a power-on reset, brown-out reset, watchdog timer with its own on-chip RC oscillator, and in-circuit serial programming (ICSP) for field upgrades. Typical applications include LED lighting control, battery chargers, sensor signal conditioning, low-power remote controls, and automotive body modules. The wide 2.0-5.5 V supply range and small MSOP-8 footprint suit it to coin-cell powered, hand-held, and sealed-environment designs. When designing with this part, ensure the ICSPDAT/ICSPCLK pins are not held low at power-up to enter programming mode, and keep ADC input source impedance below 10 kohm to preserve 10-bit accuracy. An external decoupling capacitor of 100 nF placed within 5 mm of VDD is recommended for noise immunity. This page synthesizes real-time distributor pricing, drop-in alternatives in the same MSOP-8 footprint, and engineering design notes not aggregated in the Microchip datasheet alone.

견적 요청 문의하기
PIC12F609-E/P - 8-Bit 20MHz MCU, 1.75KB Flash | Microchip
PIC12F609-E/P

PIC12F609-E/P - 8-Bit 20MHz MCU, 1.75KB Flash | Microchip

The Microchip Technology PIC12F609-E/P is an 8-bit Flash-based CMOS microcontroller in an 8-pin PDIP package, operating at up to 20 MHz with 1.75 KB (1K x 14) of Flash program memory, 64 bytes of SRAM, and 5 general-purpose I/O pins. The device belongs to Microchip's PIC12F mid-range family, which sits within the broader 8-bit PIC microcontroller portfolio and is engineered for cost-sensitive embedded control applications where small footprint, low power, and integrated peripherals are essential. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces such as timers, ADC, comparators, and communication modules. Within the system hierarchy, the PIC12F609 is a low-pin-count mid-range 8-bit MCU, falling under the broader category of microcontrollers -> microprocessors -> semiconductors. The PIC mid-range architecture uses a 14-bit instruction word and a Harvard bus structure, delivering deterministic execution and a compact instruction set well suited for state machines, sensor interfacing, and battery-powered products. Key specifications of the PIC12F609-E/P include 1.75 KB Flash, 64 bytes SRAM, 5 I/O pins, an internal 4 MHz / 8 MHz oscillator with PLL support up to 20 MHz, a 10-bit ADC, two comparators, and Microchip's nanoWatt power-saving modes. The device operates across an industrial temperature range (-40C to +125C for the -E suffix) and supports a wide 2.0V to 5.5V supply voltage. Compared with PIC10F baseline parts, the PIC12F609 adds more memory and richer peripherals while keeping the same 8-pin simplicity. The PIC12F609 uses an enhanced mid-range 8-bit core with a hardware multiplier and C-compiler friendly architecture, enabling efficient C code development alongside assembly. The device supports In-Circuit Serial Programming (ICSP) via two pins, allowing firmware updates without removal from the board, which is critical for field-deployed nodes and low-cost production programming. Typical applications include consumer appliance control, LED lighting drivers, sensor signal conditioning, battery chargers, remote controls, and small motor control loops. The 5 I/O pins and integrated ADC and comparators are sufficient for simple closed-loop tasks such as temperature sensing, light-level measurement, and PWM-driven LED dimming or fan control. When designing with the PIC12F609-E/P, plan for a decoupling capacitor close to VDD, route ICSP lines (RB6/ICCK and RB7/ICDAT) to an in-system programming header, and verify the absolute maximum VDD of 5.5V is never exceeded during hot-plug or inductive load transients. Use the nanoWatt sleep modes aggressively in battery-operated designs to extend operating life. This page consolidates manufacturer specifications, real distributor stock and pricing, and drop-in same-family alternatives (with and without the -E industrial temperature grade) into a single technical reference not found in the datasheet alone.

견적 요청 문의하기
PIC12F609-E/SN - 8-Bit 20MHz 1.75KB Flash MCU | Microchip | SOIC-8
PIC12F609-E/SN

PIC12F609-E/SN - 8-Bit 20MHz 1.75KB Flash MCU | Microchip | SOIC-8

The Microchip Technology PIC12F609-E/SN is an 8-bit flash-based CMOS microcontroller in a 8-pin SOIC (SN) package, featuring a 1.75 KB (1K x 14) flash program memory, 64 bytes of RAM, and a 20 MHz internal oscillator. It belongs to the PIC12F mid-range family and targets cost-sensitive embedded applications where a small pin count, low power consumption, and deterministic RISC performance are required. A mid-range 8-bit microcontroller (MCU) is a single-chip computer integrating a CPU, non-volatile program memory, working RAM, and configurable I/O peripherals onto one silicon die. Within the broader taxonomy, an 8-bit MCU sits inside the microcontroller family, which itself falls under microcontrollers and processors, then embedded computing, then semiconductors. The PIC12F609 specifically uses Microchip's PIC RISC architecture, executing most instructions in a single 200 ns cycle at 20 MHz, supported by only 35 single-word instructions. This combination of small footprint, easy programmability, and predictable timing is why 8-bit mid-range MCUs remain popular for simple control loops and glue logic. Key features of the PIC12F609 include 6 general-purpose digital I/O pins (with multiplexed analog and comparator functions), a 4-channel 10-bit ADC, two analog comparators with a fixed voltage reference, an enhanced universal synchronous/asynchronous receiver-transmitter (EUSART) module, brown-out reset (BOR) and power-on reset (POR), an 8 MHz internal oscillator (calibrated to ±1 %), and nanoWatt power management that drops quiescent current to the sub-microamp range during sleep. The -E temperature grade specifies an operating range of -40 °C to +125 °C, which is broader than the -I grade and suitable for industrial and outdoor enclosures. Typical applications include consumer remote controls, sensor signal conditioning front-ends, white-goods and small-appliance controllers, LED lighting drivers, low-end battery chargers, and HVAC auxiliary boards. With 6 I/O, a built-in comparator, and an EUSART, designers often use the PIC12F609 to replace discrete logic or older 8-pin legacy microcontrollers, consolidating several discrete functions into a single programmable device. When designing with this part, place a 0.1 µF decoupling capacitor as close as possible to VDD, configure the internal oscillator calibration register during initialization to maximize timing accuracy, and respect the 5.5 V absolute maximum supply rating. For low-power battery applications, leverage the nanoWatt sleep modes and gate the EUSART and ADC off when idle to extend battery life.

견적 요청 문의하기
PIC12F609-I/MD - 8-Bit 20MHz 1.75KB Flash MCU | Microchip
PIC12F609-I/MD

PIC12F609-I/MD - 8-Bit 20MHz 1.75KB Flash MCU | Microchip

The Microchip Technology PIC12F609-I/MD is an 8-bit Flash-based CMOS PIC microcontroller built on the Mid-Range core with 35 instructions and 8 stack levels, delivering 20 MHz CPU performance from a 1.75 KB (1K x 14) program memory and 64 bytes of RAM. Housed in an 8-pin DFN (4x4 mm) exposed-pad package, this IC integrates an internal 4/8 MHz oscillator, a 25 mA source/sink I/O capability, one 8-bit timer (TMR0), one 16-bit timer (TMR1), a watchdog timer, an enhanced power-on reset, brown-out reset (BOR), in-circuit serial programming (ICSP), and a user-configurable comparator with hysteresis. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and configurable peripherals designed for embedded control. The PIC12F609 belongs to the 8-bit PIC12 family, part of the Mid-Range architecture tier that sits between baseline 12-bit cores and Enhanced Mid-Range 14-bit cores in the Microchip PIC hierarchy. The family targets cost-sensitive applications requiring deterministic real-time response, ultra-low standby power (nanoWatt technology), and minimal PCB footprint. Key features of the PIC12F609-I/MD include the wide 2.0V to 5.5V operating voltage range that supports both 3.3V and 5V system designs, hardware brown-out reset for predictable recovery from voltage drops, and ICSP that allows in-field firmware updates without removing the part from the board. The comparator with user-configurable hysteresis enables analog threshold detection without external op-amps, while the 25 mA I/O drive directly powers LEDs, relays, and small logic buffers. Five usable I/O pins in an 8-pin package make the device an effective system-on-chip for space-constrained designs. The Mid-Range core executes instructions in a 4-clock cycle, yielding a 200 ns instruction time at 20 MHz, and supports interrupt-on-change and a hardware stack with 8 levels for nested subroutine calls. Internal RC oscillator modes (4 MHz and 8 MHz factory calibrated) eliminate external crystals, reducing BOM cost and assembly complexity for cost-driven consumer products. Typical applications include battery-powered sensor nodes, automotive body electronics (RKE, lighting controllers), consumer appliance controls, LED drivers, and industrial low-end PLCs. The compact DFN-8 footprint is well suited to hand-held and IoT edge devices where PCB area is at a premium and reliability over wide temperature ranges is mandatory. When designing with the PIC12F609-I/MD, ensure the exposed pad is soldered to the PCB ground plane for thermal dissipation and mechanical reliability, and apply Microchip's recommended decoupling of 100 nF plus 10 uF close to VDD. For sleep-mode designs, follow the nanoWatt section of the datasheet carefully to achieve the published standby currents. This page synthesizes distributor pricing, same-package drop-in alternatives from Microchip's PIC12 family, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC12F609-I/MF - 8-Bit MCU, 1.75KB Flash, 20MHz, 8-DFN | Microchip
PIC12F609-I/MF

PIC12F609-I/MF - 8-Bit MCU, 1.75KB Flash, 20MHz, 8-DFN | Microchip

The Microchip Technology PIC12F609-I/MF is an 8-bit PIC microcontroller featuring 1.75 KB (1K x 14) of Flash program memory, 64 bytes of RAM, and a 20 MHz internal oscillator, housed in an 8-pin DFN (3x3 mm) package with 6 user I/O pins. It belongs to the PIC12F family of small-footprint, low-pin-count microcontrollers designed for cost-sensitive and space-constrained embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripherals such as timers, comparators, ADCs, and communication interfaces. The 8-bit PIC architecture uses a modified Harvard RISC core with a single accumulator (W) and a 14-bit instruction word, prized for deterministic single-cycle execution and very low power consumption. Within the broader power management hierarchy, 8-bit MCUs sit between simple logic ICs and more capable 32-bit microcontrollers, serving battery-powered IoT nodes, consumer appliances, and automotive sub-systems. The PIC12F609 operates from 2.0 V to 5.5 V across the industrial -40 C to +85 C range and integrates an internal 8 MHz oscillator that can be calibrated in software via the OSCTUNE register, eliminating the need for an external crystal in most designs. Key peripherals include an 8-bit Timer0/Timer2 with prescaler, a 16-bit Timer1, an enhanced PWM module, a comparator with selectable reference, and a 4-channel 10-bit ADC. Brown-out Reset (BOR) and Power-on Reset (POR) are included for robust supply supervision, and an on-chip In-Circuit Serial Programming (ICSP) interface supports field upgrades. The 8-pin DFN (MF) package variant measures only 3x3 mm with a thermally enhanced exposed pad, making it ideal for handheld and wearable designs where every square millimeter matters. Code-compatible siblings such as the PIC12F615, PIC12F617, and PIC12HV609 extend this family with additional PWM channels, comparators, or internal shunt regulators. Typical applications include battery chargers, LED drivers, fan controllers, remote controls, sensor interfaces, and automotive body controllers. For each use case, the wide 2.0-5.5 V supply range allows direct connection to single-cell Li-ion or 3.3 V/5 V regulated rails. Designers should review the datasheet's electrical characteristics section for I-V curve details and derating guidelines specific to the DFN package. When migrating from the PIC12F508/509, the PIC12F609 adds enhanced PWM and an internal oscillator trim, but the pinout is forward-compatible. Ensure your development toolchain (MPLAB X IDE + XC8 compiler) supports the PIC12F609 device ID before reuse. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes beyond the manufacturer datasheet to accelerate your component selection and PCB bring-up.

견적 요청 문의하기
PIC12F609-I/P - 8-Bit 20MHz Flash MCU | Microchip Technology
PIC12F609-I/P

PIC12F609-I/P - 8-Bit 20MHz Flash MCU | Microchip Technology

The Microchip Technology PIC12F609-I/P is an 8-bit CMOS flash-based microcontroller with up to 20 MHz operating speed, 1.75 KB of program memory organized as 1K x 14, and an 8-pin through-hole DIP package. It is designed for compact embedded-control products where low power, simple integration, and a familiar PIC instruction set are valuable. The verified distributor listing identifies the device as an 8-bit PIC 12F microcontroller with 20 MHz capability and 1.75 KB flash memory. A flash-based microcontroller is a programmable control component that stores its application program in nonvolatile memory and executes firmware to sense inputs, make decisions, and control outputs. In the broader device hierarchy, this product is an 8-bit microcontroller, a microcontroller IC, a semiconductor, and an embedded-processing component. The PIC12F609 family is suitable for basic control, timing, signal conditioning, and low-to-moderate computation tasks. Key verified features include up to 20 MHz operation, 1.75 KB flash memory, 8-bit processing, and an 8-pin DIP package. The product family also includes a mid-range core with 35 instructions and 8 stack levels, according to the supplied family information. Other listed family resources include one 8-bit TMR0 timer, one 16-bit TMR1 timer, and a comparator with user-configurable hysteresis. The supplied manufacturer material also identifies nanoWatt Technology for low-power-oriented designs. The device is intended for applications that do not require a high pin count or large memory footprint. Its 8-pin package simplifies prototyping and through-hole assembly, while flash memory permits firmware to be programmed or updated after manufacture. Compared with larger 32-bit microcontrollers, the PIC12F609-I/P focuses on simplicity, low system overhead, and compact control rather than high throughput or extensive connectivity. Typical applications include small industrial controllers, simple sensor interfaces, timer-based modules, LED-control products, compact appliance controls, and educational embedded systems. The device can be used where a short instruction set, compact package, and deterministic embedded control are more useful than advanced peripherals. The supplied data does not provide complete electrical ratings, memory maps, programming details, or operating-temperature limits, so those values must be verified against the official Microchip datasheet before production design. For a new PCB, confirm the DIP-8 footprint, pin assignments, oscillator configuration, programming interface, and required decoupling. For a replacement, compare the exact package suffix, flash size, instruction set, oscillator behavior, comparator availability, timer resources, and operating range. This page combines the supplied manufacturer and distributor information with practical replacement and design guidance.

견적 요청 문의하기
PIC12F609-I/SN - 8-Bit 20MHz 1.75KB Flash MCU | Microchip
PIC12F609-I/SN

PIC12F609-I/SN - 8-Bit 20MHz 1.75KB Flash MCU | Microchip

The Microchip Technology PIC12F609-I/SN is an 8-bit PIC microcontroller based on a nanoWatt-class CMOS architecture, integrating 1.75KB Flash program memory and 64 bytes of SRAM in an 8-pin SOIC package. It operates at up to 20MHz across a 2V to 5.5V supply range and exposes six general-purpose I/O pins with interrupt-on-change capability, an internal 8MHz oscillator, brown-out reset (BOR) and power-on reset (POR). The -I suffix denotes an industrial temperature grade of -40C to +85C. A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory, working RAM, and peripheral interfaces. The PIC12F609 belongs to the PIC12F family of 8-pin baseline-to-mid-range PIC microcontrollers, sitting in the broader taxonomy: microcontroller -> embedded processor -> semiconductor. It is designed for ultra-low-power standby applications through nanoWatt technology, offering wake-on-change and watchdog timer modes that minimize quiescent draw to microampere levels. Key features include 1.75KB (1K x 14) self-programmable Flash, six I/O lines with individually selectable weak pull-ups, an 8-bit timer (TMR0) and a 16-bit timer (TMR1), a 10-bit ADC with up to four channels, an enhanced PWM module, and an internal 8MHz oscillator with calibrated accuracy. The on-chip debug circuitry supports in-circuit debugging via two I/O pins, eliminating the need for an expensive emulator. The PIC12F609 uses a RISC-based PIC core with a 14-bit instruction word and a two-stage pipeline, providing deterministic instruction timing that simplifies real-time control. Its 35 instructions and Harvard architecture give it predictable interrupt latency of approximately 200ns at 20MHz. Internal 8MHz and 31kHz oscillators remove the external crystal cost while still supporting a high-frequency mode for time-critical tasks. Typical applications include battery-powered sensors, LED drivers, small appliances, fan controllers, and simple logic replacement. The wide 2V to 5.5V range allows direct connection to two AA cells or a single Li-ion cell, while the small SOIC-8 footprint fits into dense PCBs. When designing with this MCU, allocate pin 4 as the MCLR/VPP reset pin, and reserve GP3 for ICSP programming if in-circuit serial programming is required. Decouple VDD with a 100nF ceramic capacitor placed within 5mm of the pin.

견적 요청 문의하기