마이크로컨트롤러

제품 (18716)

ATSAMD20E14A-MU - 48MHz Cortex-M0+ MCU 16KB Flash | Microchip
ATSAMD20E14A-MU

ATSAMD20E14A-MU - 48MHz Cortex-M0+ MCU 16KB Flash | Microchip

The Microchip Technology ATSAMD20E14A-MU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20 family, operating at up to 48 MHz and delivering 2.14 CoreMark/MHz. The device integrates 16 KB of Flash and 2 KB of SRAM in a 32-pin VQFN (5x5 mm) package with an exposed thermal pad, and is supplied across an industrial 1.62V to 3.63V core voltage range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The ATSAMD20E14A-MU belongs to the Cortex-M0+ class of microcontrollers, the most energy-efficient ARM core for embedded use; within the broader taxonomy, it sits as MCU -> 32-bit MCU -> ARM Cortex-M MCU -> low-power MCU -> embedded microcontroller. Its Cortex-M0+ core is binary-compatible with the Thumb instruction set, simplifying toolchain reuse across the SAM D product line. Key differentiating features include the SAM D20 Event System for inter-peripheral signalling without CPU intervention, a 12-channel 350 kbps SERCOM configurable serial engine, and a 6-channel 12-bit 350 ksps ADC with hardware averaging. The part also integrates a 10-bit 350 ksps DAC, two analog comparators, a 32 kHz RTC, and full-speed USB 2.0 device with on-chip transceiver, all packaged in 32-pin VQFN. According to the Microchip/Atmel SAM D20 datasheet, these peripherals are routed via a low-power bus matrix, allowing deterministic 1.66 µs wake-up from deep-sleep retention. Architecturally, the ATSAMD20E14A-MU uses a single-bank Flash memory with embedded EEPROM emulation through the NVM controller, hardware CRC, and a true random number generator (TRNG). The Power Manager implements six SleepWalking-enabled peripheral clocks, three sleep modes (IDLE, STANDBY, BACKUP) and a 7 µA typical BACKUP current with RTC running, positioning the part for battery-driven IoT endpoints. Typical applications include home-automation smart sensors, low-power wireless sensor nodes (when paired with an external sub-GHz transceiver), consumer HID peripherals, industrial metering, capacitive-touch human interfaces, and small-footprint USB-CDC devices. The wide operating range also supports outdoor asset-tracking tags. When designing with this device, verify your linker script reserves the upper 1 KB of SRAM for the Atmel Start/Device Library heap, and always bond the exposed pad to a continuous ground pour to meet the 31.6 °C/W theta_JB thermal path. This page synthesizes verified distributor pricing, drop-in alternatives from Microchip's own cross-reference tool, and engineering design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
ATSAMD20E14B-AU - 48MHz ARM Cortex-M0+ MCU, 16KB Flash | Microchip
ATSAMD20E14B-AU

ATSAMD20E14B-AU - 48MHz ARM Cortex-M0+ MCU, 16KB Flash | Microchip

The Microchip ATSAMD20E14B-AU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20E family, delivering up to 48 MHz core performance with 16 KB of Flash and 2 KB of SRAM in a 32-pin TQFP (7x7 mm) package. It operates from a wide 1.62 V to 3.63 V supply and integrates a 6-channel SERCOM, 12-bit 350 ksps ADC, 10-bit DAC, and multiple timers, balancing low power consumption with rich peripheral integration. The part is rated for the industrial temperature range (-40 C to +85 C) and is qualified to the Microchip AEC-Q100 grade-2 screening flow for harsh environments. An ARM Cortex-M0+ microcontroller is a 32-bit RISC processor core designed by Arm for energy-efficient embedded applications. As part of the microcontroller hierarchy, it sits above 8/16-bit legacy cores and below Cortex-M3/M4/M7 devices, pairing a Thumb-2 instruction subset with a single-cycle I/O port for deterministic GPIO response. Within the SAM D20 family, the E (32-pin) variants are the smallest-footprint members, optimized for cost-sensitive and space-constrained designs. Key features include a 12-bit 350 ksps ADC with up to 14 analog channels, a 10-bit 350 ksps DAC, six SERCOM (serial communication) interfaces configurable as UART, SPI, or I2C, full-speed USB 2.0 device support, and a Peripheral Touch Controller (PTC) supporting capacitive buttons, sliders, and proximity sensors. The Cortex-M0+ core executes the Thumb instruction set with deterministic 1.77 DMIPS/MHz performance, supported by a 4-channel DMA engine that offloads memory transfers to reduce CPU load. The integrated event system allows peripherals to trigger each other without CPU intervention, further lowering average power consumption. Architecturally, the device uses a single AHB-Lite bus matrix with a separate APB bridge for low-speed peripherals, allowing concurrent SERCOM transfers and ADC sampling. The power manager supports Idle, Standby, and Backup sleep modes with wake-on-interrupt and RTC-driven wake from backup, achieving currents down to the single-digit microamp range. On-chip voltage regulation generates the core logic supply from a single external rail, simplifying BOM and PCB layout. Typical applications include smart-home sensor hubs, low-power IoT edge nodes, capacitive-touch user interfaces for appliances, industrial sensor transmitters, USB HID peripherals, and battery-driven consumer devices such as fitness wearables. The combination of USB device, ADC, and PTC also suits data loggers and Human Interface Device (HID) designs. When designing with this part, allocate one decoupling capacitor per VDD pin (100 nF X7R plus a bulk 1 uF-4.7 uF), keep SERCOM signal traces short to avoid EMI, and connect unused I/O to VDD or GND through software-enabled pull resistors to reduce sleep current. Programming is supported through the SWD interface using Atmel/Microchip Studio, MPLAB X, or pyOCD. This page consolidates distributor pricing, drop-in pin-compatible alternatives, application circuits, and PCB design notes to help engineers evaluate the ATSAMD20E14B-AU for both new designs and legacy upgrades.

견적 요청 문의하기
ATSAMD20E14B-AUT - 48MHz Cortex-M0+ MCU, 16KB Flash, 32-TQFP | Microchip
ATSAMD20E14B-AUT

ATSAMD20E14B-AUT - 48MHz Cortex-M0+ MCU, 16KB Flash, 32-TQFP | Microchip

The Microchip Technology ATSAMD20E14B-AUT is a 32-bit ARM Cortex-M0+ based flash microcontroller from the SAM D20E family, running up to 48 MHz, with 16 KB Flash and 2 KB SRAM, housed in a 32-pin TQFP (7x7 mm) industrial-temperature grade package. The part number suffix "-AUT" denotes TQFP package, industrial temperature range (-40C to +85C), and tape-and-reel packaging. The ATSAMD20E14B-AUT delivers low-power, high-performance processing suitable for home automation, consumer, metering, and industrial applications. What is a Cortex-M0+ microcontroller? An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) MCU designed for ultra-low power embedded applications. It belongs to the broader ARM Cortex-M processor family, which sits inside the hierarchy: ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded IC. The M0+ core uses the Thumb/Thumb-2 instruction set, a single-cycle multiplier, and a tightly coupled NVIC interrupt controller. Compared with 8-bit MCUs such as the PIC16F series, the M0+ offers higher code density, modern toolchain support, deterministic interrupt latency, and far better DMIPs/mW efficiency, while still consuming minimal power. Key features of the ATSAMD20E14B-AUT include: ARM Cortex-M0+ core with Single-cycle multiplier, hardware divide, and debug access via SWD; 16 KB Flash and 2 KB SRAM with in-application programmable flash; 6 SERCOM (configurable serial communication) interfaces supporting I2C, SPI, and USART simultaneously; 12-bit ADC with up to 350 ksps throughput and 10 channels; up to 14 touch-channel support via the Peripheral Touch Controller (PTC); and 1.62V to 3.63V single-supply operation with on-chip voltage regulator. Technically, the SAM D20E integrates an 8-channel Event System, 6-channel DMA controller, Real-Time Counter (RTC), and multiple 16-bit Timer/Counters (TC). Memory protection is provided through a configurable flash access window, and security is enhanced by a 128-bit unique chip ID. The part supports Sleep, Idle, Standby, and Backup sleep modes with fast wake-up, drawing as little as a few microamps in deep-sleep, which is critical for battery-powered IoT endpoints. Typical applications include IoT sensor nodes, smart-home wireless controllers (when paired with an ATWINC1500 Wi-Fi module), industrial motor control boards (using the TC/PWM channels), battery-powered metering devices such as water/gas meters, consumer HMI products with touch-button UIs, and low-cost wearable electronics. The SERCOM flexibility lets the MCU speak multiple protocols concurrently without external glue logic. When designing with this part, allocate the 32-pin TQFP's VDD/GND pair to a star-ground layout with 100 nF + 1 uF decoupling close to each supply pin. Use the SERCOM pins thoughtfully because pin mapping to each SERCOM is multiplexed across the 32 TQFP pins, and choosing early avoids PCB rework. For low-power battery designs, leverage the integrated PTC for cap-touch wake-up, avoiding external wake controllers. This page synthesizes distributor pricing, validated drop-in alternatives (same Microchip family), and engineering notes for the ATSAMD20E14B-AUT in one place - data not consolidated in the manufacturer datasheet.

견적 요청 문의하기
ATSAMD20E14B-MUT - 48MHz ARM Cortex-M0+ MCU, 16KB Flash | Microchip
ATSAMD20E14B-MUT

ATSAMD20E14B-MUT - 48MHz ARM Cortex-M0+ MCU, 16KB Flash | Microchip

The Microchip Technology ATSAMD20E14B-MUT is an ARM Cortex-M0+ based 32-bit microcontroller from the SAM D20E family, delivering up to 48 MHz CPU clock speed with 16KB Flash and 2KB SRAM in a 32-pin VQFN (5x5 mm) package. It operates from 1.62V to 3.6V supply and integrates 6 channels of 12-bit ADC, multiple SERCOM interfaces, and a full-featured peripheral set. An ARM Cortex-M0+ microcontroller is a 32-bit RISC processor core designed for ultra-low-power embedded applications. It sits within the broader hierarchy: Cortex-M0+ -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The M0+ core delivers Thumb-2 instruction efficiency with a deterministic 2-stage pipeline, making it ideal for cost-sensitive, energy-aware designs. Key features of the ATSAMD20E14B-MUT include 16KB Flash for application code, 2KB SRAM for data, up to 26 GPIO pins, 6 SERCOM channels for flexible UART/SPI/I2C configuration, a 12-bit 350 ksps ADC with up to 16 channels, and integrated SleepWalking peripherals with Event System for sub-microamp sleep current. The device also supports a crystal-less USB bootloader via the DSU (Device Service Unit) and integrates a true 32.768 kHz RTC. The ATSAMD20E14B-MUT uses an advanced low-power architecture with multiple sleep modes (IDLE, STANDBY, BACKUP), consuming as little as 3.5 uA in BACKUP mode with RTC running. Its peripheral Event System allows direct inter-peripheral signaling without CPU wake, drastically reducing average power in sensor-driven applications. Typical applications include smart home automation (Zigbee/BLE endpoints), low-power IoT sensor nodes, consumer electronics (HID, toys), industrial metering, and battery-powered portable devices. The combination of small package size, deep-sleep current, and rich peripherals makes it a strong fit for energy-harvesting designs. Designers should pay attention to decoupling (one 100nF per VDD pin), exposed-pad grounding (mandatory for thermal dissipation on VQFN), and use Atmel Studio 7 or MPLAB X IDE with the DSU to enable field upgrades via USB without an external programmer. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that are not gathered in a single place inside the manufacturer datasheet, helping engineers select and source the part quickly.

견적 요청 문의하기
ATSAMD20E15A-AN - 32KB Flash ARM Cortex-M0+ MCU | Microchip
ATSAMD20E15A-AN

ATSAMD20E15A-AN - 32KB Flash ARM Cortex-M0+ MCU | Microchip

The Microchip Technology ATSAMD20E15A-AN is a low-power, high-performance 32-bit ARM Cortex-M0+ based flash microcontroller (MCU) featuring 32KB of Flash and 4KB of SRAM, housed in a 32-pin TQFP package. It operates at up to 48MHz clock frequency from a wide 1.62V to 3.63V supply, delivering 2.14 CoreMark/MHz and integrating 12-bit ADC, 10-bit DAC, 256-channel Peripheral Touch Controller (PTC), and a full RTC subsystem. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The ARM Cortex-M0+ is the smallest and most energy-efficient member of the ARM Cortex-M processor family, designed for embedded applications where deterministic real-time response and ultra-low power consumption are required. The SAM D20 sits in the hierarchy as: Cortex-M0+ core -> ARM Cortex-M family -> 32-bit RISC microcontroller -> embedded processor -> semiconductor IC, making it ideal for cost-sensitive yet feature-rich IoT and consumer designs. Key differentiating features include the SERCOM (Serial Communication Interface) modules that can be independently configured as UART, SPI, or I2C, plus a hardware Peripheral Touch Controller for capacitive touch buttons and sliders without external components. The 12-bit ADC delivers up to 350ksps with internal voltage reference, while the 10-bit DAC supports waveform generation. Multiple Sleep modes (Idle, Standby, Backup) and a dedicated RTC with calendar mode achieve sleep currents below 5 microamps. Typical applications span home automation endpoints (smart thermostats, sensor hubs), consumer electronics (wearable accessories, toys), metering (energy and water monitors), and industrial controls (HMI panels, low-end PLCs). The wide 1.62V to 3.63V operating range and AEC-Q100 qualified variants simplify designs that target both battery-powered and 24V industrial bus environments. When designing with the ATSAMD20E15A-AN, ensure the on-chip voltage regulator's bulk capacitor meets Microchip's reference design (typically 1uF X7R). Decoupling capacitors should be placed within 2mm of each supply pin, and unused SERCOM pads can be repurposed as GPIO. Programming is supported via Atmel-ICE or Curiosity Nano boards through the SWD interface.

견적 요청 문의하기
ATSAMD20E15A-AU - ARM Cortex-M0+ 48MHz 32KB Flash MCU | Microchip
ATSAMD20E15A-AU

ATSAMD20E15A-AU - ARM Cortex-M0+ 48MHz 32KB Flash MCU | Microchip

The Microchip ATSAMD20E15A-AU is a 32-bit ARM Cortex-M0+ based flash microcontroller from the SAM D20E family, operating at up to 48 MHz with 32 KB of Flash and 4 KB of SRAM, housed in a 32-pin TQFP (7x7 mm) industrial-grade package. It integrates a 12-bit ADC, 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), an RTC, and a full SERCOM peripheral set, making it a low-power yet high-performance general-purpose MCU for embedded designs. What is a Cortex-M0+ microcontroller? The ARM Cortex-M0+ is the smallest and most energy-efficient Cortex-M core; it executes the Thumb/Thumb-2 instruction set, provides single-cycle IO, a 32-bit hardware multiplier, and a Nested Vectored Interrupt Controller (NVIC). Microcontrollers (MCUs) integrate CPU core, non-volatile memory (Flash), volatile memory (SRAM), and peripherals on a single die, forming the smallest complete compute node in an embedded system hierarchy that ascends: Cortex-M0+ -> ARM Cortex-M family -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features of the ATSAMD20E15A-AU include: 48 MHz Cortex-M0+ core, 32 KB Flash / 4 KB SRAM, 12-bit 200 ksps ADC with up to 10 analog channels, 10-bit DAC, six SERCOM ports (configurable as UART/SPI/I2C), 256-channel PTC for touch interfaces, Sleepwalking peripherals, and an integrated RTC. The device supports 1.62 V to 3.63 V supply operation and offers multiple low-power modes including IDLE, STANDBY, BACKUP, and OFF, with typical active current around 3.6 mA at 48 MHz. The architecture pairs a deterministic Cortex-M0+ pipeline with Microchip's Event System for inter-peripheral signaling without CPU intervention, plus a 6-channel DMA controller and SleepWalking logic that lets peripherals operate autonomously while the core remains in standby. The 12-bit ADC delivers up to 200 ksps with oversampling and hardware averaging. Typical applications include home automation endpoints, consumer electronics, smart metering, industrial sensor nodes, capacitive-touch human-machine interfaces, low-power wireless sensor hubs, and battery-powered IoT devices. The wide operating voltage and rich peripheral mix let a single MCU serve as the system controller. When designing with this device, place decoupling capacitors (100 nF and bulk) close to the VDD pin, and respect the trace-length guidelines for VDDCORE/VDDIO when tying the internal LDO to the core rail; use Atmel/Microchip Studio or MPLAB X IDE for code development. This page synthesizes distributor stock data, drop-in alternatives, and practical design notes not consolidated on the manufacturer datasheet.

견적 요청 문의하기
ATSAMD20E15A-AUT - Cortex-M0+ 48MHz 32KB Flash MCU | Microchip
ATSAMD20E15A-AUT

ATSAMD20E15A-AUT - Cortex-M0+ 48MHz 32KB Flash MCU | Microchip

The Microchip Technology (formerly Atmel) ATSAMD20E15A-AUT is a 32-bit ARM Cortex-M0+ flash microcontroller running at up to 48 MHz, integrating 32 KB of Flash and 4 KB of SRAM, housed in a 32-pin TQFP (7x7 mm) package with industrial -40C to +85C operating range. The AUT suffix indicates the Tape & Reel shipping form. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one silicon die. The Cortex-M0+ is the most energy-efficient member of the ARM Cortex-M family, designed for deterministic real-time embedded control with a 2-stage pipeline, Thumb-2 instruction set, and a Nested Vectored Interrupt Controller (NVIC). Within the broader taxonomy, the ATSAMD20E15 belongs to the SAM D20 family of low-power Cortex-M0+ MCUs, which sits under the Microchip megaAVR/SAM umbrella of 8-bit and 32-bit embedded controllers. Key features include the SERCOM-configurable serial interface (configurable as UART, SPI, or I2C), a 12-bit ADC with up to 16 channels, a 10-bit DAC, multiple 16-bit Timer/Counters (TC), a Real-Time Counter (RTC), and the Peripheral Event System for hardware-triggered inter-peripheral signaling without CPU intervention. The device operates from 1.62V to 3.63V, supports Sleep, Idle, Standby and Backup low-power modes, and integrates an 8-channel Direct Memory Access (DMAC) controller. Architecturally, the SAMD20E series uses a single-cycle hardware multiplier, an internal 8 MHz and 32.768 kHz oscillator block, and a 6-channel SERCOM array that lets each peripheral be reassigned to most pins, simplifying PCB layout. The chip is supported by Microchip Studio (formerly Atmel Studio) and the MPLAB X IDE ecosystem, including ASF (Advanced Software Framework) and START code generators. Typical applications include home automation endpoints, smart metering, consumer electronics HMI, industrial sensor nodes, low-power IoT edge devices, and battery-powered wearables where active current in the single-digit mA range and sub-microamp sleep currents extend battery life. When designing with the SAMD20, choose your VDD rail between 1.62V and 3.63V and reserve the SWD pins (SWDIO/SWCLK) for in-system programming. Take advantage of the SERCOM multiplexer to keep PCB routing flexible, and use the Peripheral Event System to offload timing-critical tasks from the CPU. This page synthesizes distributor pricing, drop-in SAM D20 family alternatives, and practical design notes not found in the standalone Microchip datasheet.

견적 요청 문의하기
ATSAMD20E15A-MN - 32KB Flash Cortex-M0+ MCU 48MHz 32-VQFN
ATSAMD20E15A-MN

ATSAMD20E15A-MN - 32KB Flash Cortex-M0+ MCU 48MHz 32-VQFN

The Microchip Technology ATSAMD20E15A-MN is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20E series, delivering 48 MHz CPU performance with 32 KB of Flash and 4 KB of SRAM in a 32-pin VQFN (5x5 mm) package with exposed thermal pad. It operates from 1.6 V to 3.6 V, integrates a rich peripheral set including SERCOM, ADC, timers, and event system, and is rated for the -40C to +105C industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile memory (SRAM), non-volatile program memory (Flash/ROM), and a configurable set of peripheral interfaces (GPIO, ADC, timers, communication controllers). The ATSAMD20E15A-MN belongs to the ARM Cortex-M0+ family - the most energy-efficient ARM core, designed for deterministic 32-bit processing in cost- and power-sensitive applications. Within Microchip's product hierarchy it sits under: ARM Cortex-M0+ MCU -> SAM D20 family -> SAM D20E sub-family (32-pin) -> power-management / industrial IoT / consumer segment. Key features include 48 MHz Cortex-M0+ core reaching 2.14 Coremark/MHz, 32 KB Flash, 4 KB SRAM, six SERCOM channels (configurable as UART/SPI/I2C), a 12-bit ADC with up to 20 analog channels, multiple 16-bit timers, a 32-bit Real-Time Counter, and the Microchip Event System for inter-peripheral signaling without CPU intervention. The device also integrates a full-speed USB 2.0 device controller on selected variants and supports the Atmel/Microchip SleepWalking energy-saving scheme, allowing peripherals to wake the core autonomously only when needed. Architecturally, the SAM D20E uses a single-cycle IO-bus to peripherals and a low-leakage process, which together deliver low active current (~7 mA at 48 MHz) and multiple low-power modes (IDLE, STANDBY, BACKUP) consuming only a few microamps. The integrated voltage regulator and brown-out detector simplify power-tree design, while the 32-VQFN exposed pad provides a low theta-JA path for thermal relief in space-constrained boards. Typical applications include home automation nodes, smart metering, low-cost consumer electronics, sensor hubs, industrial control peripherals, USB HID/HID-class devices, and battery-powered IoT endpoints. The combination of Cortex-M0+ efficiency, 32 KB Flash sufficient for many connectivity stacks (BLE host via UART, sub-GHz radio drivers, LoRaWAN device code), and a compact 5x5 mm package makes this part a strong fit where STM32L0 or older Atmel SAM3N parts were traditionally specified. When designing with this device, ensure the VQFN exposed pad is soldered to a sufficiently large copper pour for thermal dissipation, place decoupling capacitors (100 nF + 1 uF) as close as possible to VDD/VDDIO pins, and respect the 1.6 V minimum supply at start-up. For firmware, use the Microchip MPLAB X IDE with the MPLAB Harmony 3 framework or ASF to access the SERCOM multiplexing and Event System drivers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to accelerate engineering selection.

견적 요청 문의하기
ATSAMD20E15A-MNT - 32KB Flash Cortex-M0+ MCU | Microchip
ATSAMD20E15A-MNT

ATSAMD20E15A-MNT - 32KB Flash Cortex-M0+ MCU | Microchip

The Microchip Technology ATSAMD20E15A-MNT is a 32-bit ARM Cortex-M0+ based flash microcontroller running at 48 MHz, with 32 KB Flash and 4 KB SRAM, housed in a 32-pin VQFN (5x5 mm) package. The part operates from 1.62 V to 3.63 V, supports up to six SERCOM communication interfaces, and integrates a 12-channel 350 ksps 12-bit ADC plus two analog comparators. It is the smallest-pin-count member of Microchip's SAM D20 family and is offered in tape-and-reel packaging (MNT suffix) for high-volume SMT assembly. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as ADCs, timers, and communication controllers. Within the broader taxonomy, the ATSAMD20E15A belongs to the category of 32-bit microcontrollers -> ARM Cortex-M0+ microcontrollers -> low-power MCUs -> embedded controllers -> semiconductors. ARM Cortex-M0+ cores are favored for their deterministic interrupt response, Thumb-2 instruction set efficiency, and ultra-low active/idle power, making them ideal for always-on battery-powered applications. Key features of this device include the SAM D20 Event System for hardware-triggered inter-peripheral signalling without CPU intervention, six SERCOM modules each configurable as I2C/SPI/UART, a 12-bit 350 ksps ADC with up to 20 analog input channels via the AIN mux, and dual analog comparators with window mode. The device also integrates a 32.768 kHz RTC oscillator domain and full-speed USB device support is NOT available on the 32-pin variant - that requires the D20J (64-pin). Architecturally, the SAM D20 uses Microchip's proprietary low-power techniques including a separated SleepWalking peripheral domain, multiple power domains (PD0/PD1/PD2), and a backup register domain retained through deepest sleep. The Cortex-M0+ core delivers 2.14 CoreMark/MHz and supports single-cycle GPIO access through the IOBUS peripheral, enabling fast bit-banging for WS2812 LEDs or other timing-sensitive protocols. Typical applications include IoT sensor nodes, home automation endpoints, industrial control sub-modules, consumer wearable MCUs, smart metering, and low-cost HMI touch-button interfaces. The wide operating voltage range (1.62-3.63 V) makes it directly compatible with 1.8 V, 2.5 V, and 3.3 V power rails commonly used in modern SoC companion designs. When designing with this MCU, allocate the 32 KB Flash budget carefully: a typical USB stack or graphics library will not fit, but bare-metal or FreeRTOS-based sensor applications have ample headroom. Ensure the VQFN-5x5 thermal pad is soldered to a grounded copper pour of at least 10 mm² for proper thermal dissipation and electrical grounding of the exposed pad. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet. Compared to vendor product pages, this entry emphasizes pin-compatible family members, AEC-Q100 variants for automotive, and validated same-package drop-in replacements for shortage mitigation.

견적 요청 문의하기
ATSAMD20E15B-AU - 48MHz Cortex-M0+ MCU, 32KB Flash | TQFP-32
ATSAMD20E15B-AU

ATSAMD20E15B-AU - 48MHz Cortex-M0+ MCU, 32KB Flash | TQFP-32

The Microchip Technology ATSAMD20E15B-AU is a 32-bit ARM Cortex-M0+ flash microcontroller running up to 48 MHz with 32 KB of Flash and 4 KB of SRAM, housed in a 32-pin TQFP (7x7 mm) package rated for industrial temperature operation. Per the Microchip SAM D20E family datasheet, the device integrates a 12-bit ADC, 10-bit DAC, multiple SERCOM modules, and a peripheral touch controller, targeting low-power embedded designs. An ARM Cortex-M0+ microcontroller is a 32-bit RISC processor core implementing the Thumb/Thumb-2 instruction set, optimized for energy efficiency and deterministic interrupt response in cost-sensitive embedded applications. The Cortex-M0+ sits at the entry level of the Cortex-M family and is widely used in home automation, consumer electronics, metering, and industrial sensor nodes where small code size and low active/idle power are required. The SAM D20E series places this core inside Microchip's Atmel-derived ecosystem, adding on-chip analog and event-system peripherals. Key features of the ATSAMD20E15B-AU include 32 KB Flash with ECC, 4 KB SRAM, six SERCOM channels configurable as UART/SPI/I2C, a 12-bit 350 ksps ADC with up to 10 analog channels, a 10-bit 350 ksps DAC, an internal 8 MHz RC oscillator plus 32 kHz crystal support, and a sleep-mode current in the microamp range. The device operates from 1.62 V to 3.63 V across the industrial -40C to +85C temperature range, simplifying multi-rail designs. The architecture pairs the Cortex-M0+ core with a multi-layer AHB/APB bus matrix, a low-power RTC, and the Peripheral Event System that lets peripherals trigger each other without CPU intervention. This event routing is the SAM D20 family's main power-saving tool, allowing the core to stay in deep-sleep while timers, comparators, or SERCOM wake it only on real activity. The 12-bit ADC achieves typical INL of +/-1.5 LSB and supports both single-ended and differential inputs via the on-chip analog multiplexer. Typical applications include smart-home sensor hubs, low-power wireless sensor nodes (when paired with an external transceiver), industrial metering and HVAC controllers, consumer appliances with capacitive touch interfaces, and battery-powered IoT endpoints. The combination of Cortex-M0+ determinism and rich analog integration makes the device a strong fit when an 8-bit AVR is no longer adequate but a Cortex-M4 is overkill. When designing with this part, ensure the VDDCORE pin is decoupled per the SAM D20 reference schematic (typically 1 uF plus 100 nF), select the correct OSCSEL fuse for the chosen clock reference, and use Microchip's ASF/MPLAB Harmony framework to take advantage of the event-driven peripheral architecture. Watch out for pin-out differences between the QFN/TQFP variants and the larger SAM D20 pin counts - the 32-pin TQFP exposes fewer SERCOM and ADC channels than the 48/64-pin siblings. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving the engineer a faster path from selection to production.

견적 요청 문의하기
ATSAMD20E15B-AUT - ARM Cortex-M0+ 48MHz 32KB Flash MCU | Microchip
ATSAMD20E15B-AUT

ATSAMD20E15B-AUT - ARM Cortex-M0+ 48MHz 32KB Flash MCU | Microchip

The Microchip ATSAMD20E15B-AUT is an ARM Cortex-M0+ based 32-bit microcontroller running at up to 48 MHz, integrating 32 KB of Flash and 4 KB of SRAM in a 32-pin TQFP (7x7 mm) package, qualified for industrial temperature range -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and peripheral interfaces (ADC, timers, communication buses) into one device. Microcontrollers sit at the heart of embedded systems, sitting below microprocessors in compute complexity but above simple logic ICs. Within the broader taxonomy: MCU -> 32-bit MCU -> ARM Cortex-M MCU -> Cortex-M0+ MCU -> low-power MCU -> SAM D20 family. The ATSAMD20E15B-AUT belongs to Microchip's SAM D20 family, designed for low-power, mixed-signal embedded designs. Key features include a 12-bit, up to 350 ksps ADC with up to 10 channels, a 10-bit 350 ksps DAC, six SERCOM channels configurable as UART/SPI/I2C, a 16-bit Timer/Counter, a Real-Time Clock, and full-speed USB 2.0 device support. The device operates from 1.62 V to 3.63 V, supports 48 MHz at 1.62-3.63 V in the -40C to +85C industrial range, and offers multiple low-power sleep modes with sub-microamp wake-up time. The on-chip SERCOM peripherals are highly reconfigurable, allowing one physical block to operate as either USART, SPI, or I2C - a design that minimizes pin count for varied interface requirements. The Cortex-M0+ core implements the ARMv6-M Thumb instruction set with a single-cycle I/O port for bit-banding, deterministic interrupt latency, and an optional Memory Protection Unit on equivalent family members. At 48 MHz, the core delivers 2.46 CoreMark/MHz, sufficient for sensor fusion, motor control loops, and simple protocol stacks. The integrated 32 KB Flash is rated for 10K erase/write cycles with retention; 4 KB SRAM supports most control-loop workloads. Typical applications include home automation controllers, consumer appliance interfaces, smart metering endpoints, IoT sensor nodes, industrial HMI panels, and low-power wireless sensor hub processors. The USB 2.0 full-speed device makes the part well suited to HID peripherals such as keyboards, mice, and custom HID-class tools. With AEC-Q100 variants available in the SAM D20 family, the same silicon architecture is also deployed in automotive body and chassis subsystems. When designing with this part, place a 0.1 uF decoupling capacitor as close as possible to each VDD pin and a bulk 4.7 uF capacitor on the main supply rail. Configure unused I/O pins as inputs with internal pull-up enabled to minimize quiescent current. For firmware development, Microchip's MPLAB X IDE with the XC32 compiler and Atmel Studio 7 both support the device, and SEGGER J-Link debug probes are fully compatible per SEGGER's supported device list. This page synthesizes distributor pricing across 9 channels, lists drop-in same-package alternatives from the SAM D20 family and competitor pin-compatible MCUs, and provides practical design notes that complement the manufacturer datasheet.

견적 요청 문의하기
ATSAMD20E15B-MU - SAM D20E 32KB Flash Cortex-M0+ MCU | Microchip
ATSAMD20E15B-MU

ATSAMD20E15B-MU - SAM D20E 32KB Flash Cortex-M0+ MCU | Microchip

The Microchip Technology ATSAMD20E15B-MU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20E family, operating at up to 48 MHz with 32 KB of Flash and 4 KB of SRAM, packaged in a 32-pin VQFN (5x5 mm) with exposed thermal pad. It integrates a 12-bit ADC, a 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), an RTC, and six SERCOM communication interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, designed for deterministic embedded workloads. Within the power-management hierarchy, MCUs sit at the system-control tier above discrete logic and below application processors; they orchestrate sensors, user I/O, and low-bandwidth communications in battery-powered and industrial systems. The SAM D20 family is positioned by Microchip as the low-power entry point of the SAM Cortex-M lineup. Key features of the ATSAMD20E15B-MU include its 2.46 CoreMark/MHz performance, a single-cycle hardware multiplier, a SleepWalking peripheral event system, and an on-chip 32 kHz RTC oscillator with PLL-derived system clock. The device supports 1.62 V to 3.6 V supply operation, has a built-in brown-out detector, and provides up to 22 GPIO lines with peripheral multiplexing. Typical applications include home automation nodes, smart metering endpoints, consumer appliances, IoT sensor hubs, low-power wireless sensor platforms, and industrial control peripherals. The integrated PTC eliminates the need for an external touch-sensing IC in capacitive button, slider, and wheel designs. When designing with this part, observe the VQFN thermal pad soldering guidelines and ensure the SERCOM pin-mux is reviewed before PCB layout. Programming and debugging are supported through the SWD interface, requiring only two pins (SWDIO, SWDCLK) plus GND. This page consolidates distributor pricing, drop-in alternative ordering, and practical design notes for the ATSAMD20E15B-MU that are not collated in the manufacturer datasheet, including verified pin-compatible SAM D20 family members and recommended companion analog parts.

견적 요청 문의하기
ATSAMD20E15B-MUT - 48MHz Cortex-M0+ MCU 32KB Flash | Microchip
ATSAMD20E15B-MUT

ATSAMD20E15B-MUT - 48MHz Cortex-M0+ MCU 32KB Flash | Microchip

The Microchip Technology ATSAMD20E15B-MUT is a low-power, high-performance ARM Cortex-M0+ based flash microcontroller running at 48 MHz with 32 KB of Flash and 4 KB of SRAM, housed in a 32-pin VQFN (5x5 mm) package. It belongs to the SAM D20E family and is qualified for industrial temperature range (-40C to +85C). The device integrates the Cortex-M0+ core with the Microchip peripheral touch controller (PTC) for capacitive touch sensing, making it well suited for home automation, consumer, metering, and industrial HMI applications. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash), working memory (SRAM), and a rich set of peripherals into one IC. The Cortex-M0+ is ARM's smallest and most energy-efficient core, optimized for deterministic interrupt response and minimal die area. Within the broader hierarchy, the ATSAMD20E15B-MUT is a 32-bit MCU -> ARM Cortex-M microcontroller -> embedded microcontroller -> integrated circuit. Compared to legacy 8-bit MCUs such as PIC16, it delivers substantially higher computational throughput, more deterministic interrupt latency, and full 32-bit Thumb-2 instruction support. Key features include 48 MHz maximum CPU clock, 32 KB Flash, 4 KB SRAM, up to 6 SERCOM (serial communication) interfaces configurable as UART/SPI/I2C, a 12-bit 350 ksps ADC with up to 10 channels, a 10-bit DAC, and the Peripheral Touch Controller supporting buttons, sliders, wheels, and proximity sensors. The device operates from 1.62 V to 3.63 V and offers multiple low-power sleep modes with sub-microamp deep-sleep current, enabling battery-powered designs. The ATSAMD20E15B-MUT leverages the Cortex-M0+ single-cycle IO bus for deterministic GPIO access and the Microchip Event System for inter-peripheral signaling without CPU intervention. Hardware cryptographic and true-random-number peripherals are not present on this device; security-sensitive applications should consider the SAML11 or SAME54 families instead. Typical applications include capacitive touch user interfaces for appliances, smart home sensor nodes, low-cost industrial control modules, battery-powered metering devices, and consumer wearables. The integrated PTC dramatically reduces BOM cost by eliminating mechanical buttons. When designing with this part, allocate the PTC pins to dedicated GPIO to avoid crosstalk with ADC inputs, and follow the SAM D20 datasheet reference decoupling network (1x 100 nF + 1x 4.7 uF) within 3 mm of the VDD pins to meet the noise floor of the 12-bit ADC. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
ATSAMD20E16A-ANT - ARM Cortex-M0+ MCU, 48MHz, 64KB Flash | Microchip
ATSAMD20E16A-ANT

ATSAMD20E16A-ANT - ARM Cortex-M0+ MCU, 48MHz, 64KB Flash | Microchip

The Microchip ATSAMD20E16A-ANT is a 32-bit ARM Cortex-M0+ based flash microcontroller running up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM in a 32-pin TQFP (7x7 mm) package with green compound and an industrial temperature rating up to 105C. It belongs to the SAM D20E family, the compact-pincount member of the SAMD20 series, which Microchip targets at home automation, consumer, metering, and industrial applications where low power and deterministic Cortex-M0+ performance are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals into one package. The ARM Cortex-M0+ is the smallest, most energy-efficient core in the Cortex-M family; in the SAMD20 hierarchy it sits above 8-bit AVR/PIC microcontrollers but below Cortex-M3/M4 parts in compute density, making it ideal for cost-sensitive embedded control. The 48 MHz clock, single-cycle I/O access, and Microchip's peripheral touch (SERCOM, Event System) make it a workhorse for connected sensor nodes. Key differentiating features of the ATSAMD20E16A-ANT include 64 KB Flash / 8 KB SRAM with single-cycle I/O access, six SERCOM serial-communication modules that can each be configured as UART, SPI, or I2C, a 12-bit 350 ksps ADC with up to 20 channels, and a 10-bit 350 ksps DAC. The integrated Peripheral Touch Controller (PTC) supports capacitive touch sensing, while the Event System enables inter-peripheral signalling without CPU intervention, reducing active time and power. The device operates from 1.62 V to 3.63 V across the -40C to +105C industrial range. Architecturally, the SAMD20E16A-ANT uses a two-pin AHB-APB bus matrix, an 8-channel DMA controller, and SleepWalking peripherals that clock-gate unused logic. Its Sleep, Standby, and Backup modes draw single-digit microamp currents, which is the reason the family is so popular in battery-powered IoT end nodes. Programming is via SWD, and the Cortex-M0+ supports the full ARMv6-M instruction set including Thumb-2. Typical applications for the ATSAMD20E16A-ANT include home-automation sensor hubs (PIR, temperature, gas), industrial metering (water/gas/electricity), consumer appliances (coffee machines, washing machines), low-power IoT edge nodes, capacitive touch user interfaces, and small motor-control loops using the on-chip Timer/Counter blocks. The combination of 64 KB Flash, deterministic Cortex-M0+ core, and rich SERCOM peripherals makes it a flexible general-purpose MCU. When designing with this part, budget the VDDCORE decoupling carefully (1 uF + 100 nF close to the pin), ensure DFLL or PLL startup time is accounted for in your boot sequence, and select the TQFP-32 package only when you need breadboard-friendly prototyping or hand-reworkable assembly - the QFN/48-pin variants exist for higher pin-count needs. This page consolidates real distributor pricing (as of 2026-09-21), package-matched drop-in alternatives from the SAM D20 family, and practical hardware design notes beyond the manufacturer datasheet summary.

견적 요청 문의하기
ATSAMD20E16A-AU - 48MHz Cortex-M0+ MCU, 64KB Flash | Microchip
ATSAMD20E16A-AU

ATSAMD20E16A-AU - 48MHz Cortex-M0+ MCU, 64KB Flash | Microchip

The Microchip Technology ATSAMD20E16A-AU is a 32-bit ARM Cortex-M0+ microcontroller (MCU) from the SMART SAM D20 family, featuring 64KB of Flash and 8KB of SRAM, running at up to 48 MHz, housed in a 32-pin TQFP (7x7 mm) package. It integrates the ARM Cortex-M0+ core with Microchip's peripherals optimized for low-power embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and SRAM), and programmable peripherals on one die, enabling compact, low-power embedded control in applications from home appliances to industrial sensors. The Cortex-M0+ is the smallest and most energy-efficient member of the ARM Cortex-M family, designed for deterministic real-time control with a 2-stage pipeline and Thumb-2 instruction set. Within Microchip's portfolio, the SAM D20 sits between the tiny 8-bit PIC MCUs and the more capable Cortex-M4 SAM D/E/F families. Key features include 64KB of in-system programmable Flash (supporting NVM commands), 8KB SRAM, a 12-bit 350 ksps ADC with up to 14 channels, 8-channel SERCOM (configurable as UART/SPI/I2C), 16-bit timers, and a full-speed USB 2.0 device interface (on selected variants). The device operates from 1.62V to 3.63V with multiple power-saving modes (Idle, Standby, Backup) achieving deep-sleep currents in the microamp range. Typical applications include home automation endpoints, consumer electronics (HID devices, wearables, smart remotes), metering and energy monitoring, industrial sensor nodes, and low-cost USB peripherals. The integrated USB controller simplifies Human Interface Devices such as keyboards, mice, and game controllers. When designing with the ATSAMD20E16A-AU, ensure the VDDCORE pin is decoupled with 1µF and 100nF capacitors placed within 5mm of the pin to maintain core voltage stability during sleep-to-active transitions. The SERCOM peripheral configuration must be locked before use to prevent glitches in asynchronous serial traffic. This page synthesizes distributor pricing, drop-in alternatives from the same SAMD20 family, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
ATSAMD20E16A-AUT - ARM Cortex-M0+ 48MHz 64KB Flash MCU | Microchip
ATSAMD20E16A-AUT

ATSAMD20E16A-AUT - ARM Cortex-M0+ 48MHz 64KB Flash MCU | Microchip

The Microchip ATSAMD20E16A-AUT is a 32-bit ARM Cortex-M0+ based flash microcontroller operating at up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM in a 32-pin TQFP (7x7 mm) package. Part of the SAM D20E family, it targets low-power, high-performance embedded designs in home automation, consumer, metering, and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for code, SRAM for data), and programmable peripherals. The ARM Cortex-M0+ is a 32-bit processor core optimized for energy efficiency and deterministic interrupt response, sitting within the ARM Cortex-M family hierarchy. The SAM D20E line is a sub-family of Microchip's SAM family, a broader portfolio that includes Cortex-M0+, M3, M4, and M7 variants. Within power-management ICs and embedded processors, the SAM D20E serves as a low-power general-purpose controller bridging 8-bit AVR/PIC designs to 32-bit ARM. Key features include up to 48 MHz CPU clock, 64 KB Flash / 8 KB SRAM, six SERCOM (serial communication) interfaces configurable as UART/SPI/I2C, a 12-bit ADC up to 350 ksps, a 10-bit DAC, and full-speed USB 2.0 device support on selected variants. Peripherals also include six 16-bit timer/counters, an RTC, and a peripheral event system. Multiple sleep modes (IDLE, STANDBY, BACKUP) keep active current low for battery-driven products. The device integrates a 2-channel DMA controller and uses Microchip's Atmel START / MPLAB X / Harmony code-generation framework. The Cortex-M0+ core uses the Thumb-2 instruction subset and offers single-cycle I/O access for deterministic GPIO toggling, important for LED control, sensor readout, and motor signaling loops. Typical applications include home automation sensor nodes, smart metering endpoints, IoT edge nodes, low-power consumer devices, industrial sensor conditioning, and human-machine interface (HMI) controllers. The 32-pin TQFP footprint is compact enough for space-constrained designs yet large enough for hand-solderable prototyping. When designing, choose between 1.8V, 2.5V, and 3.3V operation by selecting the appropriate regulator mode; decouple VDDCORE and VDDIO with 100 nF X7R ceramics placed within 3 mm of each pin. Unused SERCOM pads should be left floating or terminated to avoid current leakage. This page consolidates distributor pricing, same-family drop-in alternatives, and practical engineering notes that supplement the manufacturer datasheet.

견적 요청 문의하기
ATSAMD20E16A-MNT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16A-MNT

ATSAMD20E16A-MNT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMD20E16A-MNT is a low-power, high-performance 32-bit ARM Cortex-M0+ based flash microcontroller from the SAM D20E family, operating up to 48MHz with 64KB of flash memory and 8KB of SRAM, housed in a 32-pin VQFN (5x5 mm) package. The device integrates 64KB program flash, 8KB SRAM, and the Cortex-M0+ core that delivers 2.14 CoreMark/MHz, enabling efficient deterministic processing for embedded control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The SAM D20 family sits within Microchip's ARM Cortex-M0+ portfolio, positioned as a low-power general-purpose MCU hierarchy: Cortex-M0+ -> ARM Cortex-M -> 32-bit microcontroller -> embedded MCU -> semiconductor. The ATSAMD20E16A-MNT belongs to the SAM D20E sub-family, which targets compact 32-pin designs requiring balanced performance, low active and sleep current, and rich peripheral integration. Key features include a 48MHz maximum CPU clock, 1.62V to 3.63V operating voltage range, six SERCOM modules (each configurable as UART, SPI, or I2C), 10-bit ADC and DAC, 16-bit timers, RTC, and full-speed USB device support. The integrated event system and peripheral touch controller (PTC) enable responsive sensor and user-interface implementations without burdening the CPU. Technically, the device achieves 2.14 CoreMark/MHz efficiency typical of the Cortex-M0+ architecture, with single-cycle I/O access and a low-latency interrupt controller. The 32-VQFN package (5x5 mm) exposes 24 GPIO lines with peripheral multiplexing, supports -40C to +105C industrial operating range (per the MNT suffix), and uses an exposed pad for thermal dissipation. Typical applications include home automation endpoints, smart metering, industrial sensor nodes, consumer electronics with touch UI, and low-power IoT devices. The combination of six SERCOM instances, USB device, and ADC/DAC on-chip reduces external component count. When designing with this part, verify that the 32-VQFN exposed pad is soldered to a sufficient copper pour for thermal and electrical grounding. Use Microchip's Atmel Studio / MPLAB X IDE with the ASF or Harmony 3 frameworks for peripheral configuration; legacy code targeting the ATSAMD20 series is broadly portable across the family.

견적 요청 문의하기
ATSAMD20E16A-MU - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16A-MU

ATSAMD20E16A-MU - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMD20E16A-MU is a 32-bit ARM Cortex-M0+ microcontroller running at up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM in a 32-pin VQFN (5x5 mm) package. It is part of the SAM D20E family of low-power, high-performance flash MCUs targeted at home automation, consumer, metering, and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code and SRAM for data), and a rich set of peripherals on one die. The ARM Cortex-M0+ is the smallest and most energy-efficient member of the ARM Cortex-M processor family, designed for cost-sensitive embedded applications that still benefit from the Thumb-2 instruction set, deterministic interrupt handling, and a broad ecosystem of tools and middleware. The SAM D20 line extends the Cortex-M0+ with Microchip's peripheral set and an event system, placing this part in the wider hierarchy of microcontroller -> embedded processor -> semiconductor device. Key features include the 48 MHz Cortex-M0+ core (2.14 CoreMark/MHz), 64 KB Flash, 8 KB SRAM, a 12-channel 12-bit 350 ksps ADC, two analog comparators, up to six SERCOM (serial communication) interfaces configurable as UART/SPI/I2C, a 16-bit timer/counter, and a real-time clock. The device operates from 1.62 V to 3.63 V and includes a sophisticated SleepWalking peripheral event system that lets the CPU remain in deep sleep while peripherals autonomously wake on external events. The 32-VQFN package has an exposed thermal pad for improved dissipation in continuous-active designs. Architecturally, the ATSAMD20E16A uses Microchip's proprietary low-power process and integrates an on-chip voltage regulator and brown-out detector. The peripheral event system (EVSYS) routes peripheral triggers without CPU intervention, and the SERCOM modules can be software-configured for asynchronous or synchronous serial protocols, providing design flexibility not common in fixed-function MCUs. Typical applications include battery-powered IoT sensor nodes, smart-home wireless gateways, portable medical monitoring accessories, industrial HMI panels, HVAC controllers, and USB device peripherals. The 64 KB Flash and 8 KB SRAM fit BLE stack + application + bootloader architectures common in modern connected products. When designing with this part, choose decoupling per the datasheet (typically 100 nF plus 1 uF bulk near VDD pins), assign unused GPIO as input with internal pull enabled, and use the on-chip brown-out detector plus the Watchdog Timer (WDT) for fail-safe recovery. The SAM D20 family shares the Atmel/Microchip Studio (MPLAB X) IDE and Atmel START framework for code generation. This page synthesizes distributor pricing, drop-in same-family alternatives, application examples, and design notes that complement the manufacturer datasheet with practical purchasing and selection context for embedded engineers.

견적 요청 문의하기
ATSAMD20E16B-AN - 64KB Flash Cortex-M0+ MCU | Microchip | TQFP-32
ATSAMD20E16B-AN

ATSAMD20E16B-AN - 64KB Flash Cortex-M0+ MCU | Microchip | TQFP-32

The Microchip Technology ATSAMD20E16B-AN is a 32-bit ARM Cortex-M0+ based flash microcontroller from the SAM D20E family, delivering up to 48 MHz CPU performance with 64 KB of flash and 8 KB of SRAM in a 32-pin TQFP package. It operates from 1.62 V to 3.63 V across industrial temperature ranges, features 26 general-purpose I/O pins, and integrates rich serial connectivity including I2C, SPI, and UART/USART peripherals. The device also includes a 12-bit ADC, 10-bit DAC, multiple timers, brown-out detection, power-on reset, and a watchdog timer. An ARM Cortex-M0+ microcontroller is the smallest and most energy-efficient member of the ARM Cortex-M processor family, designed for cost-sensitive embedded applications that require deterministic real-time response and ultra-low power consumption. Within the broader taxonomy, the ATSAMD20E16B-AN belongs to the microcontroller hierarchy: ARM Cortex-M0+ core -> 32-bit MCU -> embedded microcontroller -> integrated circuit -> semiconductor. Microchip's SAM D20 family specifically targets low-power, high-performance designs in consumer, industrial, and IoT markets where battery life and code density are critical. Key features of the ATSAMD20E16B-AN include a 48 MHz maximum CPU clock with single-cycle I/O access, 64 KB in-system programmable flash with error correction, 8 KB SRAM, a 12-channel 12-bit ADC with up to 1 MSPS sampling, a 10-bit 350 kSPS DAC, six SERCOM modules for configurable serial communication, and a peripheral touch controller supporting capacitive sensing without external components. The B revision adds a force external reset pin and a DMA controller for efficient data movement between peripherals and memory. Architecturally, the ATSAMD20E16B-AN uses the Cortex-M0+ core with a von Neumann bus structure, hardware single-cycle multiplication, and the ARMv6-M Thumb instruction set. It integrates Microchip's Event System for low-latency peripheral signaling without CPU intervention, and the Sleepwalking technology that allows peripherals to operate during deep sleep modes without waking the CPU, achieving standby current below 1 uA. These features position it between simple 8-bit MCUs and higher-end Cortex-M3/M4 devices, balancing performance, power, and cost. Typical applications include home automation nodes, smart sensor hubs, consumer electronics HMI panels, low-cost metering devices, and industrial control peripherals. The wide operating voltage range and AEC-Q100 qualified Extended temperature grade make it suitable for automotive sub-systems, building automation, and battery-powered IoT edge nodes requiring years of operation from a single cell. The compact TQFP-32 package is ideal for space-constrained PCB layouts where breadboard-friendly DIP alternatives are not required. When designing with this device, ensure decoupling capacitors are placed within 5 mm of each supply pin per Microchip's SAMD20 datasheet guidelines. The SAM D20's SERCOM peripheral is highly configurable and each instance must be explicitly software-mapped to specific I/O pins before use; forgetting this step is a common source of 'silent' failures on first prototypes. This page synthesizes distributor pricing, parameter-comparison alternatives within the SAM D20 family, and practical design notes that complement - but do not replace - the official Microchip datasheet.

견적 요청 문의하기
ATSAMD20E16B-AU - 32-bit ARM Cortex-M0+ MCU, 64KB Flash, TQFP-32 | Microchip
ATSAMD20E16B-AU

ATSAMD20E16B-AU - 32-bit ARM Cortex-M0+ MCU, 64KB Flash, TQFP-32 | Microchip

The Microchip Technology ATSAMD20E16B-AU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20E family, operating at up to 48 MHz with 64 KB of Flash and 8 KB of SRAM, housed in a 32-pin TQFP (7x7 mm) package. It integrates a peripheral touch controller supporting up to 256 channels, a 12-bit ADC, a 10-bit DAC, a full-speed USB 2.0 device controller, and multiple serial interfaces including SERCOM, I2C, SPI, and UART, making it a versatile SoC for connected embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one silicon die. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, optimized for deterministic interrupt response and ultra-low power operation, enabling battery-powered devices that wake quickly, execute brief tasks, and return to sleep. The SAM D20 family extends this with Microchip's proprietary low-power techniques and an event system that lets peripherals trigger each other without CPU involvement. Key specifications of the ATSAMD20E16B-AU include a 1.62 V to 3.63 V supply range, six SERCOM channels configurable as I2C/SPI/UART, six timer/counter instances, a real-time clock, an integrated 32 kHz oscillator, and a full-speed USB 2.0 device port. The 12-bit ADC delivers up to 350 ksps with hardware oversampling to 16-bit effective resolution, while the 10-bit DAC supports waveform generation. The 256-channel peripheral touch controller (PTC) enables robust capacitive touch interfaces without external components. Architecturally, the device uses a single-cycle I/O bus for deterministic GPIO access, an event system for inter-peripheral signaling, and SleepWalking peripherals that can wake the CPU only when meaningful data is present. This combination yields active currents under 4 mA at 48 MHz and deep-sleep currents below 5 microamperes with RTC retention, qualifying it for energy-harvesting and coin-cell designs. Typical applications include home automation nodes, smart metering endpoints, consumer Human-Machine Interface (HMI) with capacitive touch, industrial sensor transmitters, USB HID peripherals, and low-power wireless sensor hubs pairing with sub-GHz or BLE modules. Its blend of analog integration, USB, and touch makes it a strong single-chip solution when bill-of-materials cost and PCB area are critical. When designing with this device, ensure the VDDCORE pin is decoupled with a 1 uF X7R ceramic capacitor close to the package, and use the on-chip voltage regulator in normal mode rather than bypassing it. Decoupling the USB VBUS pin with 4.7 uF and adding 90-ohm differential impedance-controlled traces on D+/D- are mandatory for USB compliance. The B variant adds an enhanced PTC and improved ADC; firmware written for ATSAMD20E16A rev A silicon may need migration to the latest ASF4 / MCC peripheral drivers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for part selection, sourcing, and PCB bring-up.

견적 요청 문의하기
ATSAMD20E16B-AUT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16B-AUT

ATSAMD20E16B-AUT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMD20E16B-AUT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20E family, delivering up to 48 MHz CPU performance with 64 KB of Flash and 8 KB of SRAM in a 32-pin TQFP (7x7 mm) industrial-temperature package. It integrates a single-cycle hardware multiplier, a 12-bit 350 ksps ADC, a 10-bit 350 ksps DAC, up to six SERCOM serial communication modules, a 16-bit timer/counter, a Real-Time Clock (RTC), and a 256-channel Peripheral Touch Controller (PTC) for capacitive touch sensing. The part operates from 1.62 V to 3.6 V supply, supporting both battery-powered and 3.3 V regulated rails. What is a Cortex-M0+ microcontroller? A microcontroller unit (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals. The ARM Cortex-M0+ is the most energy-efficient core in the Cortex-M family, designed for 32-bit performance at minimal power and cost. MCUs sit within the embedded-computing hierarchy alongside microprocessors, FPGAs, and DSPs, and form the decision-making brain of nearly every connected sensor node, consumer appliance, and industrial control loop. Key features of the ATSAMD20E16B-AUT include: six SERCOM channels configurable as UART, SPI, or I2C, an Event System for hardware-triggered inter-peripheral signalling, SleepWalking peripherals that wake the CPU only on relevant events, and full-speed USB device via the integrated USB 2.0 Full-Speed controller. The 12-bit ADC offers up to 16 channels and the PTC supports up to 256 mutual-capacitance touch buttons without external components. Architecture-wise, the device combines a two-wire SERCOM-based interconnect, a single-cycle multiplier and a 4-channel DMA controller that offloads memory-to-peripheral transfers, freeing the Cortex-M0+ core for application code. The embedded voltage regulator and power-on reset reduce external component count. Typical applications include home-automation sensor hubs, low-power consumer devices, smart metering, capacitive touch user interfaces, industrial sensor nodes, and battery-powered IoT endpoints. The integrated USB and touch peripherals specifically suit HIDs, USB-CDC bridges, and white-goods control panels. Design consideration: the internal 1.62 V regulator requires a 1 uF decoupling capacitor on VDDIN and a 1 uF on VDDANA; bypassing both with a 100 nF high-frequency cap prevents ADC reference noise during SERCOM bursts. This page synthesizes distributor pricing, parametric comparison, drop-in alternatives, and practical design notes not found on the manufacturer product page alone.

견적 요청 문의하기
ATSAMD20E16B-MN - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16B-MN

ATSAMD20E16B-MN - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip ATSAMD20E16B-MN is a low-power, high-performance ARM Cortex-M0+ based flash microcontroller housed in a 32-pin VQFN (5x5 mm) package. It operates at up to 48 MHz, integrates 64 KB of Flash and 8 KB of SRAM, and supports a wide 1.6 V to 3.6 V supply range. The device targets home automation, consumer, metering, and industrial applications. What is a Cortex-M0+ microcontroller? An ARM Cortex-M0+ is an ultra-low-power 32-bit processor core optimized for energy-efficient embedded designs. Microcontrollers (MCUs) such as the SAM D20 family integrate the Cortex-M0+ CPU with Flash, SRAM, peripherals, and a power management subsystem on a single die. Within the power-management hierarchy, the SAM D20E sits below the Cortex-M0+ family, within Microchip's SAM D20 product line, and ultimately within the broader 32-bit MCU category of integrated circuits. Key features include a Serial Communication Interface (SERCOM) module configurable as UART/USART, SPI, or I2C, a 12-bit Analog-to-Digital Converter (ADC), a 10-bit Digital-to-Analog Converter (DAC), and multiple 16-bit timer/counters. The 32-VQFN package with exposed pad provides a low thermal resistance path suitable for space-constrained designs. The part carries the -MN industrial temperature grade suffix, supporting operation from -40C to +105C. The ATSAMD20E16B-MN leverages Microchip's proprietary low-power picoPower technology, providing multiple sleep modes with sub-microamp quiescent current and fast wake-up times. The Cortex-M0+ core implements the ARMv6-M Thumb instruction set with a single-cycle I/O port for deterministic GPIO access. The peripheral event system allows inter-peripheral signalling without CPU intervention, reducing firmware complexity and power. Typical applications include wireless sensor nodes, smart home devices, low-cost industrial controllers, battery-powered metering, and consumer electronics with USB or capacitive touch interfaces. The wide operating voltage range allows direct Li-ion or 2x AA battery connection without external regulation. When designing with this MCU, ensure adequate decoupling (100 nF plus 1 uF bulk) is placed near each VDD pin, and that the exposed thermal pad is soldered to a continuous ground plane for thermal and electrical performance. The SERCOM modules require careful pin-mux configuration via the PORT and PMUX registers before use. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes - all in one place for engineers evaluating the ATSAMD20E16B-MN for low-power embedded designs.

견적 요청 문의하기
ATSAMD20E16B-MNT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16B-MNT

ATSAMD20E16B-MNT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip ATSAMD20E16B-MNT is a 32-bit ARM Cortex-M0+ microcontroller running at up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM, housed in a 32-pin VQFN (5x5 mm) package with an exposed thermal pad. It targets low-power, high-performance embedded designs in home automation, consumer, metering, and industrial segments. According to the Microchip product page, the device operates from 1.62 V to 3.63 V across a -40 C to +105 C industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The Cortex-M0+ is ARM's smallest and most energy-efficient core, well suited to deterministic real-time control. The SAM D20 family sits within Microchip's broader portfolio of Cortex-M0+ parts: SAMD20 -> Cortex-M0+ MCU -> 32-bit MCU -> microcontroller -> embedded processor. This taxonomy positions it between 8-bit AVR/PIC parts (lower performance, lower power) and Cortex-M4/M7 parts (higher performance, higher power). Key features of the ATSAMD20E16B-MNT include six SERCOM (Serial Communication Interface) modules that can be independently configured as UART, SPI, or I2C, a 12-bit ADC with up to 16 channels, a 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), and a full-function RTC with calendar mode. The device supports up to 26 GPIO pins and embeds a 32 kHz low-power oscillator for accurate sleep-mode timing. Architecturally, the SAM D20E uses single-cycle hardware multiplication, a Nested Vectored Interrupt Controller (NVIC), and Microchip's proprietary Sleepwalking peripheral logic that allows the CPU to stay in deep sleep while peripherals react to events, waking only when needed. This architecture is what enables the device's typical active current in the microampere range when peripherals are clock-gated. Typical applications include smart-home sensor nodes, low-power wireless MCUs paired with sub-GHz transceivers, industrial metering front-ends, consumer appliances, and battery-powered IoT endpoints. The combination of 64 KB Flash and 8 KB SRAM comfortably supports small RTOS-based designs and over-the-air (OTA) bootloaders when paired with an external flash. When designing with the ATSAMD20E16B-MNT, plan the SERCOM assignment matrix early - each of the six SERCOM channels can be software-mapped to multiple pin sets, so pad layout choices determine which peripheral combinations are available. Designers should also budget for the 32 kHz crystal footprint even if the internal 32 kHz oscillator is used initially. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single source for BOM, sourcing, and PCB layout decisions.

견적 요청 문의하기
ATSAMD20E16B-MU - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16B-MU

ATSAMD20E16B-MU - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMD20E16B-MU is an ARM Cortex-M0+ based 32-bit flash microcontroller (MCU) from the SAM D20E family, delivering up to 48 MHz CPU clock speed with 64 KB of flash memory and 8 KB of SRAM, housed in a 32-pin VQFN (5x5 mm) package with an exposed pad for improved thermal dissipation. It integrates a single-cycle hardware multiplier, single-cycle 32-bit I/O interface, and a full Cortex-M0+ debug architecture with configurable pin mapping via the SERCOM peripheral. What is an ARM Cortex-M0+ microcontroller? An ARM Cortex-M0+ MCU is an ultra-low-power 32-bit processor core from Arm designed for embedded applications that demand deterministic real-time response, low energy consumption, and a small silicon footprint. Within the broader taxonomy it sits as a microcontroller (MCU) -> 32-bit MCU -> ARM Cortex-M microcontroller -> Cortex-M0+ class. The ATSAMD20E16 belongs to Microchip's SAM D20 family, which positions it as a low-power, high-performance general-purpose MCU for consumer, industrial, and IoT edge nodes. Key features of the ATSAMD20E16B-MU include 64 KB (64K x 8) of embedded flash program memory, 8 KB of SRAM, four SERCOM (serial communication interface) instances that can each be independently configured as UART/SPI/I2C, a 12-bit ADC, two analog comparators, two brown-out detectors (BOD), power-on reset (POR), a real-time clock (RTC), watchdog timer (WDT), and six timer/counter instances. The device supports Sleep, Idle, and Standby low-power modes enabling deep sub-microamp sleep currents for battery applications. Architecturally, the ATSAMD20E16B-MU uses a single-cycle 32-bit bus matrix with separate AHB and APB bridges, giving deterministic latency on GPIO and peripheral access. The 48 MHz Cortex-M0+ core pairs with a tightly-coupled flash controller that reduces wait states on contiguous code execution, while the SERCOM blocks re-use the same silicon for I2C, SPI, or USART through a flexible pin-mux, which lets designers reassign peripherals at PCB bring-up without changing the BOM. Typical applications include home automation nodes, smart metering, industrial sensor conditioning, low-power wearables, USB human-interface devices, and consumer electronics requiring Bluetooth or sub-GHz companion chips. The wide 1.62-3.63 V VDD range lets it operate from a single Li-ion cell or two AA cells directly. When designing with this part, route the exposed pad (EP) to a continuous ground plane with thermal vias for EMI and thermal performance, and use Atmel Studio 7 or Microchip Studio with the DFP (device family pack) to configure the SERCOM peripheral multiplexing. This page synthesizes distributor pricing, drop-in alternatives within the SAM D20 family, and practical design notes not consolidated on the manufacturer product page.

견적 요청 문의하기