마이크로컨트롤러

제품 (18723)

ATSAMD20J18A-CN - ARM Cortex-M0+ MCU, 256KB Flash, 64-UFBGA
ATSAMD20J18A-CN

ATSAMD20J18A-CN - ARM Cortex-M0+ MCU, 256KB Flash, 64-UFBGA

The Microchip Technology ATSAMD20J18A-CN is a 32-bit ARM Cortex-M0+ flash microcontroller in the SAM D20 family, delivering up to 48 MHz CPU performance with 256 KB of Flash program memory and 32 KB of SRAM in a 64-pin UFBGA package. The device operates from 1.6 V to 3.6 V and supports both industrial (-40C to +105C) temperature grades, making it suitable for harsh-environment embedded designs. What is an ARM Cortex-M0+ microcontroller? An ARM Cortex-M0+ is an ultra-low-power 32-bit processor core designed by ARM Holdings, optimized for cost-sensitive embedded applications that require deterministic real-time behavior. It sits within the hierarchy of microcontroller categories: microcontroller -> 32-bit MCU -> ARM Cortex-M microcontroller -> Cortex-M0+ class, and within the SAM D20 product line it represents the entry point to Microchip's Cortex-M0+ portfolio. Key features of the ATSAMD20J18A-CN include the integrated Peripheral Touch Controller (PTC) supporting up to 256 channels for capacitive touch interfaces, a 12-bit ADC with up to 20 channels, a 10-bit DAC, SERCOM (serial communication) modules configurable as UART/SPI/I2C, and a full-speed USB 2.0 device interface. The Event System allows inter-peripheral signaling without CPU intervention, reducing software complexity and power consumption. The architecture uses single-cycle I/O access, hardware multiplier, and Microchip's proprietary SleepWalking technology for peripheral-level clock gating. The 48 MHz Cortex-M0+ core delivers 0.93 DMIPS/MHz, sufficient for sensor fusion, motor control, and HMI applications. Typical applications include home automation control panels, smart metering endpoints, consumer appliances with capacitive touch, industrial sensor hubs, and battery-powered IoT edge nodes. The combination of low active current (~3 mA at 48 MHz), multiple low-power sleep modes, and fast wake-up time makes it suitable for energy-harvesting designs. When designing with this part, evaluate decoupling strategy carefully: place one 100 nF X7R ceramic capacitor on each VDD/VDDIO pair as close to the IC as possible, and provide a 4.7 uF bulk capacitor on the main rail. Verify I/O bank voltage compatibility - all GPIO must reference the same VDDIO rail for the bank to operate correctly. This page synthesizes distributor pricing, drop-in alternatives from the same SAM D20 family, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
ATSAMD20J18A-CU - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAMD20J18A-CU

ATSAMD20J18A-CU - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip ATSAMD20J18A-CU is a 32-bit ARM Cortex-M0+ flash microcontroller operating at up to 48 MHz, equipped with 256 KB of Flash and 32 KB of SRAM, housed in a 64-ball UFBGA (5x5 mm) package. It targets low-power, high-performance embedded applications in home automation, consumer, metering, and industrial segments, reaching up to 2.46 CoreMark/MHz while consuming as little as 70 uA/MHz active and sub-uA sleep currents. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on a single die. The Cortex-M0+ class of MCUs represents the most energy-efficient tier of the ARM Cortex-M family, optimized for deterministic interrupt-driven workloads and ultra-low standby power. Within Microchip's portfolio, the ATSAMD20J18 belongs to the SAM D20 family of microcontrollers, sitting in the broader category of 32-bit flash MCUs under the Microchip SMART ARM-based product line. The part is pin-compatible across the SAM D20 series, enabling identical PCB layouts for variants with differing Flash and SRAM sizes. Key features of the ATSAMD20J18A-CU include an integrated 12-bit ADC with up to 20 channels, a 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), a full-speed USB 2.0 device interface, multiple SERCOM (serial communication) modules configurable as UART, SPI, or I2C, and a 32-bit Real-Time Clock (RTC). It also provides six 16-bit Timer/Counters, an Event System for inter-peripheral signaling without CPU intervention, and a comprehensive clock management unit with on-chip PLLs and oscillators. Architecturally, the ATSAMD20J18A-CU is built on a low-leakage CMOS process and integrates a high-performance 32-bit core with single-cycle I/O access, hardware multiply, and a Nested Vectored Interrupt Controller (NVIC). The 2.46 CoreMark/MHz figure confirms efficient Thumb-2 instruction execution, and the wide 1.62 V to 3.63 V operating range allows direct connection to single-cell Li-ion or 3.3 V regulated rails. Typical applications include low-power wireless sensor nodes, smart metering, home automation controllers, USB Human Interface Devices (HIDs), industrial control panels, and consumer electronics with capacitive touch user interfaces. The rich peripheral mix enables single-chip implementations of bridge, HMI, and data-acquisition products. Designers should plan for the SERCOM peripheral mapping during firmware architecture, since each SERCOM instance can be routed to a specific set of pads. Decoupling must include a 100 nF cap per VDD pin plus a bulk 4.7 uF capacitor placed close to the package. For USB applications, the DP/DM traces require 90 ohm differential impedance and a precision 1.0 uF USB transceiver bypass capacitor. This page synthesizes distributor pricing, drop-in alternatives within the SAM D20 family and from competing Cortex-M0+ families, and practical design notes that go beyond the manufacturer datasheet to accelerate your schematic capture and PCB layout decisions.

견적 요청 문의하기
ATSAMD20J18A-MN - ARM Cortex-M0+ MCU 256KB Flash | Microchip
ATSAMD20J18A-MN

ATSAMD20J18A-MN - ARM Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip Technology ATSAMD20J18A-MN is a 32-bit ARM Cortex-M0+ based flash microcontroller delivering up to 48 MHz CPU performance with 256 KB of Flash and 32 KB of SRAM, housed in a 64-pin QFN (HVQCCN) package. It operates across a wide 1.62 V to 3.63 V supply range and is specified for the industrial temperature range of -40 C to +105 C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as ADC, timers, communication interfaces, and GPIOs. The SAM D20 family sits within Microchip's broader portfolio of ARM Cortex-M based microcontrollers -> 32-bit microcontrollers -> microcontrollers -> semiconductors, and is purpose-built for low-power embedded designs. The Cortex-M0+ core delivers 2.14 CoreMark/MHz, balancing energy efficiency with deterministic real-time response. Key features include a 12-bit ADC with up to 16 channels and 350 ksps throughput, a 10-bit DAC, six SERCOM configurable serial interfaces (each usable as UART, I2C, or SPI), a 24-channel peripheral touch controller, and a full-speed USB 2.0 device port. The Event System and SleepWalking peripherals enable deterministic peripheral wake-up while the CPU remains dormant, allowing designers to meet aggressive power budgets. The architecture combines an ultra-low-power design (down to 8 uA/MHz active, sub-microamp deep sleep) with deterministic interrupt latency from the Cortex-M0+ Nested Vector Interrupt Controller (NVIC). Integrated AES-like crypto hardware and a true random number generator (TRNG) on selected variants strengthen secure connectivity. The 64-pin QFN package exposes up to 52 GPIOs enables two I2S channels and a full-speed USB PHY. Typical applications include home automation nodes, smart metering endpoints, consumer wearables, industrial sensor hubs, and IoT edge devices that need both low standby consumption and responsive real-time behavior. The wide supply range and industrial temperature grade also suit battery-powered or outdoor deployments. When designing with this device, ensure the QFN thermal pad is soldered to a sufficiently large copper pour to meet the 64-pin HVQCCN thermal envelope. The SAM D20's SERCOM multiplexing requires careful pin mapping via the PORT controller; refer to the device pinout table before committing PCB layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAMD20J18A-MNT - 48MHz Cortex-M0+ MCU, 256KB Flash, 64-QFN
ATSAMD20J18A-MNT

ATSAMD20J18A-MNT - 48MHz Cortex-M0+ MCU, 256KB Flash, 64-QFN

The Microchip Technology (formerly Atmel) ATSAMD20J18A-MNT is a 32-bit ARM Cortex-M0+ flash microcontroller delivering 48 MHz CPU performance with 256 KB of embedded Flash and 32 KB of SRAM, packaged in a 64-pin QFN (9x9 mm). It operates from 1.62 V to 3.63 V across an industrial temperature range of -40 °C to +105 °C and integrates peripherals including SERCOM (I²C/SPI/UART), 12-bit ADC, 10-bit DAC, 16-bit PWM timers, RTC, and a 256-channel peripheral touch controller (PTC) for capacitive sensing. A low-power, high-performance 32-bit microcontroller (MCU) is the foundation of modern embedded systems, combining a processor core, program memory, data memory, and analog/digital peripherals on a single silicon die. The Cortex-M0+ belongs to ARM's low-power microcontroller family, optimized for deterministic interrupt response and energy-efficient operation in always-on or battery-powered designs. MCUs like the SAM D20 sit hierarchically below microprocessors in complexity but above simple discrete logic in functionality, serving as the configurable decision-making brain of home appliances, sensor nodes, and industrial control boards. Key features include 2.14 CoreMark/MHz efficiency, six SERCOM channels configurable as I²C, SPI, or USART, a 12-bit 350 ksps ADC with up to 20 channels, a 10-bit 350 ksps DAC, two I²S interfaces, full-speed USB device support (note: ATSAMD20J parts do not include USB; that resides on the SAMD21), and a 24-channel event system for autonomous inter-peripheral signaling without CPU intervention. The integrated PTC provides up to 256 channels of hardware-accelerated capacitive touch sensing for buttons, sliders, and proximity detection. The SAM D20 uses a two-layer AHB-Lite bus matrix with separate bridges for Flash and SRAM, allowing 32-bit code execution from Flash with zero-wait-state prefetch buffering. The device includes Microchip's SleepWalking technology, which lets peripherals examine incoming data while the CPU remains in deep-sleep, waking only on qualifying events. Power profiles offer RUN, IDLE, STANDBY, BACKUP, and OFF modes, with typical active current of ~3 mA at 48 MHz and deep-sleep backup current under 4 µA with RTC running. Typical applications include home automation hubs and connected appliances, smart metering (electricity, gas, water), consumer electronics with touch interfaces, industrial sensor transmitters, low-cost LoRaWAN/BLE bridge nodes, and battery-powered IoT end devices. The wide operating voltage and industrial temperature range also suit automotive aftermarket and harsh-environment instrumentation. When designing with the ATSAMD20J18A-MNT, leverage the Atmel/Microchip START tool and ASFv6 (Atmel Software Framework) to generate peripheral drivers, FreeRTOS ports, and USB stacks. The 64-QFN variant omits USB pins (those are reserved on the bare die, and the J-package silicon only exposes them as GPIOs); specify ATSAMD20J18A-AU (LQFP64) if you require alternate pin remapping. Mind the 3-wire SWD interface: dedicate one TCK/TMS pad pair to programming rather than reusing them for application GPIOs. This page synthesizes distributor pricing (as of 2026-09-21), pin-compatible same-family drop-in alternatives such as ATSAMD21J18A and ATSAMD20J17A, and practical design notes not aggregated on any single manufacturer page.

견적 요청 문의하기
ATSAMD20J18A-MU - SAM D20 Cortex-M0+ MCU, 256KB Flash | Microchip
ATSAMD20J18A-MU

ATSAMD20J18A-MU - SAM D20 Cortex-M0+ MCU, 256KB Flash | Microchip

The Microchip ATSAMD20J18A-MU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20 family, delivering up to 48 MHz CPU clock, 256 KB of Flash and 32 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed pad. It integrates a 12-bit ADC, 10-bit DAC, 256-channel Peripheral Touch Controller (PTC), and a full set of serial interfaces including SERCOM, I2C, SPI and UART. The device operates from a 1.62 V to 3.6 V supply and reaches 2.14 CoreMark/MHz, making it a strong fit for low-power, mixed-signal embedded designs. A Cortex-M0+ microcontroller is the smallest and most energy-efficient core in the ARM Cortex-M family, designed for deterministic embedded control. Within the broader semiconductor hierarchy it sits inside the microcontroller category, itself a sub-class of microprocessors and ultimately of integrated circuits. The SAM D20 family specifically targets low-power applications, where deep-sleep current, fast wake-up and peripheral event system behaviour determine battery lifetime and are critical design parameters. Key differentiating features of the ATSAMD20J18A-MU include its Event System for CPU-independent peripheral interconnect, a 32-bit RTC with calendar mode, and a 12-bit 350 ksps ADC with up to 20 channels. The integrated PTC supports robust capacitive touch sensing up to 256 sensors without external ICs, while the SERCOM peripherals can be independently configured as USART, I2C or SPI, giving strong pin-out flexibility within the 64-pin footprint. The device leverages a single-cycle hardware multiplier, an MPU for memory protection, and a low-power Brown-Out Detector. Its SleepWalking capability lets peripherals wake the core only when meaningful data is available, enabling sub-microamp idle budgets while keeping analogue blocks ready. Internal voltage regulation keeps digital noise isolated from sensitive analogue domains. Typical applications include smart-home and building automation nodes, low-power wireless sensor hubs, consumer human-interface products using capacitive touch, motor control companion MCUs, smart lighting controllers, and metering/instrumentation endpoints. The wide 1.62 V-3.6 V supply range and onboard analogue make it equally suitable for battery-powered wearables and industrial 3.3 V backplanes. When designing with this part, prioritise decoupling close to all VDD pins, route the exposed pad to a continuous ground copper pour for thermal dissipation, and verify that the chosen SERCOM mapping matches your required pinout before PCB fabrication. Always consult the device datasheet for the latest errata, package land pattern and absolute maximum ratings. This page synthesizes distributor pricing, drop-in alternatives, application notes and design considerations beyond what is contained in the manufacturer datasheet alone.

견적 요청 문의하기
ATSAMD21E15B-AFT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip
ATSAMD21E15B-AFT

ATSAMD21E15B-AFT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip

The Microchip Technology ATSAMD21E15B-AFT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family, running at 48 MHz with 32 KB of Flash and 4 KB of SRAM, housed in a 32-pin TQFP (7x7 mm) package. It is part of Microchip's Functional Safety (FuSa) line, designed for applications requiring IEC 60730 Class B safety compliance and low-power operation. The device operates from a single 1.62 V to 3.63 V supply and integrates a full-speed USB 2.0 device interface alongside multiple SERCOM peripherals, making it a compact solution for connected embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and configurable peripherals such as timers, communication interfaces, and ADCs. The Cortex-M0+ is the most energy-efficient member of the ARM Cortex-M family, optimized for deterministic real-time performance and ultra-low static power. The SAM D21 series sits within Microchip's broader portfolio of 8-bit PIC and 32-bit SAM ARM Cortex microcontrollers, targeting general-purpose, low-power, and connectivity-oriented designs across consumer, industrial, and IoT markets. Key features of the ATSAMD21E15B-AFT include six SERCOM serial communication modules configurable as UART, SPI, or I2C, a 14-channel 12-bit ADC with up to 350 ksamples/s, a 10-bit DAC, multiple 16-bit timer/counters, and an RTC, plus USB 2.0 Full-Speed device support. The FuSa variant adds hardware support for safety features such as dual-core self-test, watchdog, and CRC modules that simplify IEC 60730 Class B certification. Sleep current is in the microamp range and full-power operation is gated by an efficient on-chip voltage regulator. Architecturally, the device combines an ARM Cortex-M0+ core with a single-cycle hardware multiplier, Microchip's proprietary event system for deterministic peripheral signalling without CPU wake-up, and the Peripheral Touch Controller for capacitive sensing. The integrated Full-Speed USB PHY removes the need for external transceivers, and the SERCOM modules can be remapped to multiple pin positions to ease PCB routing. Typical applications include USB HID peripherals, home appliance control boards subject to IEC 60730 safety requirements, low-power wireless sensor nodes, capacitive touch user interfaces, and small industrial control modules. The wide 1.62-3.63 V supply range also makes the part suitable for 1S Li-ion battery-powered products. When designing with the ATSAMD21E15B-AFT, ensure the VDDCORE pin is decoupled with a 1 uF ceramic capacitor and that VDDIO and VDDIN share a clean rail. The part's FuSa documentation package (DS60001673) provides the self-test library and safety manual needed to claim Class B compliance. Migration between ATSAMD20 and ATSAMD21 parts is generally straightforward, but USB-equipped applications must verify the SAMD21 variant has the integrated PHY enabled. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
ATSAMD21E15B-AU - 32KB Flash ARM Cortex-M0+ MCU | Microchip
ATSAMD21E15B-AU

ATSAMD21E15B-AU - 32KB Flash ARM Cortex-M0+ MCU | Microchip

The Microchip Technology ATSAMD21E15B-AU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21 family, integrating 32KB Flash and 4KB SRAM in a 32-pin TQFP package. It operates at up to 48 MHz and is powered from a 3.3V nominal supply (1.62V-3.6V range). The device targets general-purpose embedded applications requiring low power consumption and rich peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. Within the broader semiconductor hierarchy, the ATSAMD21E15B-AU belongs to the ARM Cortex-M0+ class of microcontrollers, which are designed for energy-efficient 32-bit computing in cost-sensitive applications. The SAM D21 series extends Cortex-M0+ with Microchip's Event System, SERCOM peripherals, and full-speed USB support on selected variants. Key differentiating features include a 12-channel 350 µs minimum sample time 12-bit ADC, up to 26 GPIO lines, and six SERCOM interfaces that can each be configured as UART, I²C, or SPI. The integrated Event System allows peripherals to communicate without CPU intervention, reducing active time and current draw. SleepWalking peripherals continue to monitor external events while the CPU sleeps, achieving standby currents measured in microamperes. Architecturally, the ATSAMD21E15B-AU uses a single-cycle hardware multiplier and a Nested Vector Interrupt Controller (NVIC) to deliver deterministic interrupt response. The advanced analog peripherals, including a 10-bit DAC and two analog comparators, make it suitable for sensor signal conditioning. The on-chip Full-Speed USB 2.0 device interface (selected variants) simplifies connectivity for hardware peripherals. Typical applications include IoT sensor nodes, home automation controllers, wearable fitness bands, USB human-interface devices, and industrial control subsystems. The combination of low power, USB connectivity, and capacitive touch support makes it popular in consumer electronics and connected home products. When designing with this MCU, allocate sufficient decoupling capacitance near each VDD pin and route the SWD signals (SWDIO/SWDCLK) as short as possible for reliable debug. The on-chip 32.768 kHz oscillator should be configured for low-power RTC modes. Verify the specific variant's peripheral count against your BOM requirements.

견적 요청 문의하기
ATSAMD21E15B-AUT - 32KB Flash Cortex-M0+ MCU, 32-TQFP | Microchip
ATSAMD21E15B-AUT

ATSAMD21E15B-AUT - 32KB Flash Cortex-M0+ MCU, 32-TQFP | Microchip

The Microchip Technology ATSAMD21E15B-AUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family, featuring 32 KB of Flash, 4 KB of SRAM, and a 48 MHz CPU clock, housed in a 32-pin TQFP (7x7 mm) package supplied on Tape & Reel. Operating from 1.62 V to 3.63 V, the part integrates a 6-channel SERCOM, 10-bit ADC, 10-bit DAC, and a full-speed USB 2.0 Device/Host interface, making it one of the most feature-dense Cortex-M0+ parts in its pin-count class. The "AUT" suffix indicates the industrial temperature grade (-40C to +85C) in T&R packaging. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, and integrated peripherals. The ARM Cortex-M0+ is a 32-bit processor core optimized for energy efficiency and deterministic interrupt response, commonly used in battery-powered IoT, sensor, and human-machine interface applications. The SAM D21 family extends this with Microchip's proprietary peripherals (SERCOM, Event System, TCC) that allow peripheral multiplexing across almost every GPIO. Key differentiating features include a hardware Divide Square Root Accelerator (DIVAS), a SleepWalking peripheral event system that wakes the CPU only when necessary, and a 5-channel Direct Memory Access controller. According to the SAM D21 datasheet (40001882A), the device consumes 70 uA/MHz in Active mode and drops to under 5 uA in Sleep mode with full RAM retention, enabling multi-year battery life on coin-cell powered designs. Architecture-wise, the SAM D21 uses a 2-layer AHB/APB bus matrix with tightly-coupled SRAM, providing deterministic single-cycle access for the Cortex-M0+ core. The integrated Full-Speed USB 2.0 transceiver eliminates the need for an external PHY, and the 12-channel Event System allows peripherals to communicate without CPU intervention, freeing the core for application logic. The 6 SERCOM blocks can each be configured as UART, SPI, or I2C, giving 18 logical communication channels in total. Typical applications include USB human-interface devices, low-power wireless sensor nodes, industrial control modules, and consumer electronics such as remote controls and smart-home hubs. The device's combination of USB, ADC, DAC, and rich peripherals in a compact 32-pin package suits designs that previously required multiple external components. When designing with this part, ensure the 1.62 V minimum supply is respected during DC-DC converter startup, and place the VDDCORE decoupling capacitor close to pin 5 to minimize core-rail transients. Configure unused pins as analog inputs to minimize digital switching current in power-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
ATSAMD21E15B-MFT - 48MHz ARM Cortex-M0+ MCU, 32KB Flash | Microchip
ATSAMD21E15B-MFT

ATSAMD21E15B-MFT - 48MHz ARM Cortex-M0+ MCU, 32KB Flash | Microchip

The Microchip Technology ATSAMD21E15B-MFT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family with 32KB Flash, 4KB SRAM, and operation up to 48MHz, housed in a 32-pin VQFN (5x5 mm) package. The device integrates a single-cycle hardware multiplier, Micro Trace Buffer, and full peripheral set including SERCOM, 12-bit ADC, and USB, in a compact footprint targeted at space-constrained designs. What is a microcontroller? A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and programmable I/O peripherals. MCUs are the foundation of embedded systems, executing deterministic firmware for sensor reading, motor control, communication bridging, and user interface tasks. The SAM D21E family is positioned within Microchip's low-power ARM Cortex-M0+ portfolio, optimized for battery-powered IoT, consumer, and industrial sensing applications with sub-microamp sleep currents and a wide 1.62V-3.63V operating range. Key features include 32KB in-system self-programmable Flash with signature row and user row, 4KB SRAM, a 12-channel 12-bit 350ksps ADC, six SERCOM modules (each configurable as UART/SPI/I2C), one USB 2.0 Full-Speed device/host with on-chip transceiver, and a 24-channel event system for CPU-independent peripheral-to-peripheral signaling. The device includes a 6-channel DMA controller, two I2S/SSC interfaces, RTC with calendar, and crypto/hash engines (AES, SHA, True Random Number Generator). Architecturally, the SAM D21E implements the Cortex-M0+ v6-M profile with a Von Neumann bus to Flash and SRAM, single-cycle 32-bit ALU, and 4KB flash cache/branch cache that boosts effective throughput to 2.46 CoreMark/MHz. The integrated SleepWalking peripheral logic allows communication interfaces and timers to wake selected logic without waking the CPU. This event-driven architecture achieves measurable energy savings versus poll-based designs in always-on duty-cycled applications. Typical applications include wearables and fitness bands, low-power wireless sensor nodes (BLE, LoRa, sub-GHz), USB HID peripherals, smart home sensor hubs, industrial control panels, and battery-operated data loggers requiring sub-1uA sleep states and rapid wake-to-active transitions. The AEC-Q100 qualification makes the automotive-grade revision suitable for dashboard clusters and body controllers. When designing with this device, ensure proper decoupling with a 100nF ceramic capacitor close to each VDD pin and a 4.7uF bulk capacitor near the regulator output. Configure unused pins as inputs with enabled pull-ups to avoid floating leakage; unused pins configured as outputs risk injecting noise into analog rails.

견적 요청 문의하기
ATSAMD21E15C-UUT - 32KB Flash Cortex-M0+ MCU WLCSP-35 | Microchip
ATSAMD21E15C-UUT

ATSAMD21E15C-UUT - 32KB Flash Cortex-M0+ MCU WLCSP-35 | Microchip

The Microchip Technology ATSAMD21E15C-UUT is a 32-bit ARM Cortex-M0+ microcontroller in a 35-ball WLCSP package, integrating 32KB in-system self-programmable Flash and 4KB SRAM. Operating at up to 48MHz with a single-cycle hardware multiplier and Micro Trace Buffer, the device targets low-power, general-purpose embedded designs where board space is at a premium. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory, data memory, and peripheral interfaces on a single silicon die. Within the broader semiconductor taxonomy, an MCU sits beneath the system-on-chip (SoC) hierarchy and above general-purpose microprocessors. The ARM Cortex-M0+ is an ultra-low-power 32-bit core optimized for deterministic interrupt response and minimal active/idle energy, making it ideal for battery-powered sensor nodes and human-interface devices. The SAMD21 family is positioned as the mainstream general-purpose line that drops in to SAM D20 sockets while adding richer analog and richer PWM. Key features include an ARM Cortex-M0+ core at 48MHz, 32KB Flash, 4KB SRAM, a 12-channel Direct Memory Access Controller (DMAC), a 12-channel Event System for inter-peripheral signalling without CPU intervention, Idle and standby sleep modes plus SleepWalking peripherals, a two-pin Serial Wire Debug (SWD) interface, and a one non-maskable interrupt. The device supports an operating voltage of 1.62V to 3.63V and a 32-pin count equivalent in this WLCSP-35 footprint variant. Architecturally the ATSAMD21E15C leverages an advanced analog front-end with 12-bit ADC and DAC, configurable timer/counter blocks (TC), and SERCOM serial engines that can be mapped to I2C, SPI, or UART on demand. The integrated Power-on Reset (POR) and brown-out detection ensure deterministic startup, while SleepWalking peripherals enable the device to wake on peripheral events without fully waking the CPU. Typical applications include wearables and fitness bands, low-power wireless sensor nodes (when paired with an external radio), USB human-interface devices, IoT edge nodes, smart-home controllers, and compact consumer products requiring small footprint. The 35-ball WLCSP package enables designs under 25 mm². When designing with this part, ensure the WLCSP-35 footprint matches PCB pad geometry and that the device is rated for the 85°C operating temperature indicated by the UUT suffix. The WLCSP package typically requires underfill or careful mechanical mounting for harsh-vibration environments. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAMD21E15L-AF - 48MHz Cortex-M0+ MCU 32KB Flash | Microchip
ATSAMD21E15L-AF

ATSAMD21E15L-AF - 48MHz Cortex-M0+ MCU 32KB Flash | Microchip

The Microchip Technology ATSAMD21E15L-AF is an ARM Cortex-M0+ based 32-bit Flash microcontroller (MCU) from the SAM D21E family, operating at up to 48 MHz with 32 KB of Flash and 4 KB of SRAM in a 32-pin TQFP (7x7 mm) package. It supports a 1.62 V to 3.63 V supply range, integrates a 12-bit ADC, 10-bit DAC, and multiple SERCOM channels, and is engineered for low-power control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals including timers, communication interfaces, and analog blocks. Within the broader taxonomy, the ATSAMD21E15L-AF sits in the Cortex-M0+ sub-family, which is the most energy-efficient member of the ARM Cortex-M processor family, optimized for deterministic embedded control in cost-sensitive, low-power products. The SAM D21 family further extends this with Microchip's peripheral mix and the Atmel/Microchip ecosystem (MPLAB X IDE, ASF, Harmony), making it a popular drop-in upgrade path from older AVR designs. Key features of the ATSAMD21E15L-AF include a maximum CPU clock of 48 MHz, full-speed USB 2.0 device support, up to six SERCOM channels configurable as UART/SPI/I2C, a 12-bit 350 ksps ADC with up to 14 channels, a 10-bit 350 ksps DAC, multiple PWM-capable timers (TCC/TC), and an event system for inter-peripheral signaling without CPU intervention. Functional Safety (FuSa) features and a built-in 32 kHz oscillator support deterministic real-time operation. Architecturally, the device combines a Cortex-M0+ core with a multi-layer bus matrix, low-power SleepWalking peripherals, and Microchip's proprietary peripheral touch controller for capacitive sensing. The wide supply range (1.62 V to 3.63 V) enables direct operation from a single Li-ion cell or 3.3 V regulated rail, while the integrated USB transceiver removes the need for an external crystal or PHY for many low-speed USB device applications. Typical applications include LED lighting controllers, low-voltage motor control, industrial sensor hubs, USB human-interface devices (HIDs), consumer wearables, and battery-powered IoT endpoints. The combination of USB device, 12-bit ADC, and PWM timers makes it a strong fit for closed-loop lighting and motor control where deterministic PWM timing is required. When designing with this part, observe the 48 MHz maximum clock, derate ADC inputs below 1.62 V, and verify USB D+/D- routing per the USB 2.0 specification. The 32-pin TQFP is footprint-compatible with other SAM D20E/SAM D21E family members, simplifying migration between Flash sizes. This page synthesizes distributor pricing, drop-in alternatives, application examples, and practical design notes not found in the manufacturer datasheet, accelerating component selection for embedded engineers.

견적 요청 문의하기
ATSAMD21E15L-AFT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip
ATSAMD21E15L-AFT

ATSAMD21E15L-AFT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip

The Microchip ATSAMD21E15L-AFT is a 32-bit ARM Cortex-M0+ based Flash microcontroller delivering 48MHz CPU performance with 32KB of Flash memory and 4KB of SRAM, housed in a 32-pin TQFP (7x7 mm) package. It integrates a rich peripheral set including a 12-bit ADC, DAC, multiple SERCOM interfaces, and a 6-channel PWM timer that suit low-power, control-oriented embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and peripheral interfaces such as ADC, timers, and communication blocks into one package. The SAM D21 family from Microchip sits within the hierarchy: Cortex-M0+ core -> ARM Cortex-M family -> 32-bit RISC MCU -> microcontroller -> embedded processor -> semiconductor. This taxonomic context helps position the part within the broader embedded-systems landscape and supports accurate AI knowledge-graph retrieval. Key features include an operating voltage range of 1.6V to 3.6V, AEC-Q100 qualification for automotive environments, an extended -40C to +125C temperature range, and Microchip's Functional Safety (FuSa) documentation support for safety-critical designs. The device also includes a full-speed USB 2.0 interface, multiple SERCOM blocks configurable as UART/SPI/I2C, a 12-bit 350ksps ADC, a 10-bit 350ksps DAC, and on-chip touch support via the Peripheral Touch Controller (PTC). The ATSAMD21E15L-AFT is engineered for low-power operation, supporting multiple Sleep modes (IDLE, STANDBY, BACKUP) with consumption as low as a few microamps, making it suitable for battery-powered and energy-harvesting applications. The 48MHz Cortex-M0+ core with single-cycle multiplier provides strong integer performance for control loops, while the Event System and DMA enable low-overhead peripheral chaining. Typical applications include industrial lighting control, brushless DC (BLDC) motor drive, USB-equipped consumer devices, IoT sensor hubs, and human-machine interface (HMI) controllers. The wide temperature range and AEC-Q100 grade also support automotive body electronics and dashboard modules. When designing with this MCU, provide adequate decoupling (100nF + bulk capacitor near each VDD pin), keep the 32.768KHz crystal traces symmetric, and reserve a SWD header (SWDIO/SWDCLK/RESET/GND) on the PCB for in-circuit programming. The Cortex-M0+ core has no hardware FPU, so favour fixed-point math in DSP loops to avoid CPU saturation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design considerations not consolidated in the manufacturer datasheet, providing actionable procurement and design value for engineering teams.

견적 요청 문의하기
ATSAMD21E15L-MNT - 48MHz Cortex-M0+ MCU, 32KB Flash, 32-VQFN | Microchip
ATSAMD21E15L-MNT

ATSAMD21E15L-MNT - 48MHz Cortex-M0+ MCU, 32KB Flash, 32-VQFN | Microchip

The Microchip Technology ATSAMD21E15L-MNT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family, offering 48 MHz CPU performance, 32 KB of Flash, and 4 KB of SRAM in a 32-pin VQFN (5x5 mm) package with a -40C to +105C industrial temperature grade and Tape-and-Reel packaging. What is a Cortex-M0+ microcontroller? A microcontroller is a single-chip computer that integrates a CPU core, program Flash, data SRAM, and a rich set of peripherals (timers, ADC, communication interfaces, GPIO) onto one silicon die. The ARM Cortex-M0+ is the smallest and most energy-efficient member of the ARMv6-M architecture family, designed for deterministic embedded control in cost- and power-sensitive applications. Cortex-M0+ MCUs sit within the hierarchy: microcontroller -> embedded MCU -> ARM-based MCU -> Cortex-M class -> Cortex-M0+ sub-class -> semiconductor IC. The SAM D21 family extends the basic Cortex-M0+ with Microchip's SERCOM (serial communication) peripheral set and advanced analog such as 12-bit ADC, DAC, and analog comparators. Key features of the ATSAMD21E15L-MNT include a 1.6 V to 3.6 V supply voltage range, an internal 48 MHz oscillator (with PLL), full-speed USB 2.0 device support on select SAM D21 pins, and a powerful 12-channel event system that lets peripherals trigger each other without CPU intervention. The device is supported by the Atmel/Microchip Studio IDE and the MPLAB X IDE ecosystem, with code reuse across the SAM D20/D21 family through the ASF and Harmony 3 frameworks. Native 1.6 V operation allows direct connection to a single Li-ion cell or two AA cells without an external LDO, simplifying the BOM for battery-powered designs. Typical applications include low-power IoT sensor nodes, LED lighting control, brushed DC and stepper motor control (via the on-chip PWM timers and TCC counter/timer capture blocks), consumer Human-Interface Devices (HID) such as keyboards and mice, and industrial control daughter boards. The combination of a Cortex-M0+ core, deep-sleep currents in the microamp range, and a rich peripheral set makes the part particularly attractive for battery-powered and USB-powered products. When designing with this device, note that the 'L' in the part number denotes the 105 C industrial temperature grade, while the 'MNT' suffix denotes 32-VQFN (5x5 mm) with Tape-and-Reel packaging. Pin assignment must be cross-checked against the SAM D21 family datasheet pinout table, since identical SAM D21E die is offered in QFN, QFP and WLCSP variants. Decoupling into NMOS-capable rails should include 100 nF + 4.7 uF near VDDIN, plus a bulk capacitor on VDDANA when the analog peripherals are active. This page synthesizes distributor pricing, drop-in same-family alternatives, and design notes not always surfaced on the manufacturer product page.

견적 요청 문의하기
ATSAMD21E16B-AF - 48MHz Cortex-M0+ MCU 64KB | Microchip
ATSAMD21E16B-AF

ATSAMD21E16B-AF - 48MHz Cortex-M0+ MCU 64KB | Microchip

The Microchip ATSAMD21E16B-AF is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family, featuring 64KB Flash, 8KB SRAM, and a maximum CPU frequency of 48MHz packaged in a 32-pin TQFP (7x7 mm) industrial-grade (125°C) footprint. The device integrates a hardware multiplier, single-cycle 32x32 multiply, and a rich peripheral set including SERCOM (UART/SPI/I2C), USB 2.0 Full-Speed with host and device support, 12-bit ADC, 10-bit DAC, and multiple timer/counter channels. According to the SAM D21 datasheet document 40001882A, the part achieves 2.46 CoreMark/MHz and is designed for low-power applications with multiple SleepWalking-enabled peripherals. The SAM D21 family is part of the Atmel SMART portfolio of 32-bit ARM Cortex-M0+ microcontrollers, ranging from 32 to 64 pins with up to 256KB Flash and 32KB SRAM, designed for simple migration across pin counts with identical peripheral modules, hex-compatible code, and identical linear address maps. As a Cortex-M0+ based MCU it offers a streamlined single-cycle ALU and provides a hardware single-cycle multiplier for fast integer arithmetic. The family targets low-power general-purpose applications while retaining a rich analog and digital peripheral mix, making it suitable for consumer, industrial, and battery-powered IoT endpoints. Key features of the ATSAMD21E16B-AF include six SERCOM modules supporting UART, SPI with FIFOs, and I2C up to Fast-Mode Plus, a Full-Speed USB 2.0 device/host with on-chip transceiver and 8 endpoints, a 12-bit 350ksps ADC with up to 20 channels including hardware oversampling, two analog comparators with window mode, a 10-bit 350ksps DAC, and six 16-bit timer/counters for PWM, input capture, and frequency measurement. The integration of these peripherals reduces BOM cost in sensor hubs, human-interface devices, and motor-control signal-stage applications. Architecture-wise, the ATSAMD21E16B-AF uses a two-level AHB/APB bus matrix with separate bridges for high-bandwidth peripherals such as USB, and a low-power peripheral bus for always-on functions. The Power Manager (PM) supports RUN, IDLE, STANDBY, BACKUP, and OFF sleep modes with typical RUN current of approximately 3 mA at 48 MHz with all peripherals enabled. The brown-out detector, supply-voltage monitoring, and on-chip voltage regulator enable reliable operation across 1.62 V to 3.63 V supply, with the AF suffix denoting 125°C industrial temperature grade and Pb-free TQFP-32 packaging. Typical applications for the ATSAMD21E16B-AF include low-power IoT sensor nodes, USB HID peripherals, wearable fitness devices, smart-home control panels, industrial sensor hubs, and consumer audio accessories that need hardware PWM, USB, and capacitive touch support. Its low-power SleepWalking and Event System make it especially useful in event-driven designs where the CPU stays asleep while peripherals wake on a threshold crossing. When designing with this MCU, ensure decoupling is generous - 0.1 µF X7R close to each VDD pin and a 4.7 µF bulk capacitor on VDDCORE is the recommended starting point. Designers must also configure the GCLK and DFLL blocks correctly before enabling SERCOM and USB to avoid lockups. The 32-pin TQFP-32 footprint allows hand-rework-friendly prototyping and is suitable for reflow profiles up to peak 260°C per JEDEC J-STD-020.

견적 요청 문의하기
ATSAMD21E16B-AU - 48MHz Cortex-M0+ MCU, 64KB Flash | Microchip
ATSAMD21E16B-AU

ATSAMD21E16B-AU - 48MHz Cortex-M0+ MCU, 64KB Flash | Microchip

The Microchip Technology ATSAMD21E16B-AU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family, featuring 64KB of Flash, 8KB of SRAM, and a maximum CPU clock of 48MHz, housed in a 32-pin TQFP (7x7 mm) package. It is designed for low-power embedded applications requiring USB connectivity, capacitive touch sensing, and intelligent peripherals in a compact footprint. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for code, SRAM for data), and programmable I/O peripherals. The SAM D21E line targets cost-sensitive designs and provides a Cortex-M0+ core - the most energy-efficient ARM core - while preserving the full ARM Thumb instruction set for code density. Within Microchip's portfolio, this device sits in the 32-pin SAM D21E sub-family of the broader SAM D21 series (which spans 32 to 64 pins). Key features include 2.46 CoreMark/MHz performance, a full-speed USB 2.0 device with on-chip transceiver, 6 SERCOM serial-communication modules (each assignable as UART/SPI/I2C), a 12-bit 350ksps ADC, two analog comparators, a 16-bit TC/PWM timer array, and up to 26 GPIO. The device operates from 1.62V to 3.63V, supports SleepWalking for event-driven wake-up, and offers a built-in 32kHz RTC and event system for inter-peripheral signaling. The architecture pairs the Cortex-M0+ core with a single-cycle hardware multiplier and a separate bus matrix for peripherals, with DMA available on most serial and analog channels. The peripheral event system allows deterministic inter-peripheral triggers without CPU intervention, enabling low-latency, low-power responses in motor, sensor, and lighting control loops. Typical applications include USB HID peripherals (keyboards, mice, custom input devices), capacitive touch user interfaces, low-power IoT sensor nodes, wearable electronics, hobby servos, and industrial control front-ends. The combination of USB, touch, and SERCOM flexibility makes it a popular choice for prototyping and consumer products. When designing with this part, follow Microchip's recommendations for decoupling (100 nF plus 4.7 uF bulk) and route the USB DP/DM lines as a 90-ohm differential pair with a 1.5 kohm pull-up on D+. For first-time users, the SAM D21 Xplained Pro board provides an Atmel Studio / MPLAB X compatible starter kit. This page synthesizes distributor pricing, drop-in alternatives from the SAMD20/SAMD21 family, and practical design notes not consolidated on any single manufacturer page.

견적 요청 문의하기
ATSAMD21E16B-MU - ARM Cortex-M0+ MCU, 48MHz, 64KB Flash | Microchip
ATSAMD21E16B-MU

ATSAMD21E16B-MU - ARM Cortex-M0+ MCU, 48MHz, 64KB Flash | Microchip

The Microchip Technology ATSAMD21E16B-MU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family, operating at up to 48 MHz with 64 KB of in-system self-programmable Flash and 8 KB of SRAM, housed in a 32-pin VQFN (5x5 mm) package. It is qualified for industrial temperature range (-40C to +85C) and runs from a 1.62V to 3.63V supply, targeting low-power and general-purpose embedded designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, and programmable I/O peripherals on a single die, enabling compact embedded designs without external logic. The SAM D21E line sits within Microchip's Atmel SMART family of Cortex-M0+ devices, positioned in the hierarchy as: SAM D21E -> SAM D21 family -> Cortex-M0+ MCU -> ARM 32-bit microcontroller -> embedded processor -> semiconductor. This taxonomy matters for engineers cross-porting firmware across ARM cores or migrating between SAM D20/D21 variants. Key features include a single-cycle hardware multiplier, a Micro Trace Buffer for lightweight instruction trace, an Event System for inter-peripheral signaling, a 12-channel Event System, and a Peripheral Touch Controller supporting capacitive buttons, sliders, and wheels. The device exposes six SERCOM interfaces (each configurable as I2C/SPI/USART), one full-speed USB 2.0 device/host, a 14-channel DMA, a 12-bit 350 ksps ADC, one 10-bit 350 ksps DAC, and four 16-bit timer/counters. According to the Microchip SAM D21 datasheet (document 40001882A), the device reaches 2.46 CoreMark/MHz. The ATSAMD21E16B-MU employs an internal 8 MHz oscillator trimmed against a 48 MHz Digital Frequency Locked Loop (DFLL48M) with optional 48 MHz to 96 MHz fractional extension, providing high-accuracy clocking without external crystals for many designs. Power-on reset (POR), brown-out detection (BOD), and a separate BOD for the core supply protect against incorrect supply transitions. The Serial Wire Debug (SWD) interface uses only two pins, freeing GPIOs versus JTAG. Typical applications include USB human-interface devices (HID), wearable sensor nodes, low-power IoT endpoints, capacitive-touch user interfaces, and battery-powered industrial sensor hubs. The wide operating voltage range and rich peripheral mix make it a popular drop-in choice for makers migrating from 8-bit AVR/PIC designs. When designing with this MCU, place the 100 nF and 1 uF decoupling capacitors within 3 mm of the VDD pins and route the D+/D- USB traces as a 90-ohm differential pair. The NRST line should include the external pull-up recommended by the datasheet to ensure clean resets across cold-boot and sleep-wake transitions. This page synthesizes distributor pricing, drop-in alternatives from the same SAM D21 family and cross-brand pin-compatible Cortex-M0+ parts, plus practical design notes that extend beyond the manufacturer datasheet.

견적 요청 문의하기
ATSAMD21E16B-UUT - 32-bit ARM Cortex-M0+ MCU, 64KB Flash, 35-WLCSP | Microchip
ATSAMD21E16B-UUT

ATSAMD21E16B-UUT - 32-bit ARM Cortex-M0+ MCU, 64KB Flash, 35-WLCSP | Microchip

The Microchip ATSAMD21E16B-UUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21 family, featuring 64KB Flash, 8KB SRAM, and a maximum CPU frequency of 48MHz, housed in a compact 35-ball WLCSP package (2.82 x 2.53 mm). The device integrates USB 2.0 Full-Speed, SERCOM (I2C, SPI, UART), 12-bit ADC, 10-bit DAC, and multiple timer/counter channels, achieving 2.46 CoreMark/MHz energy efficiency. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. The Cortex-M0+ is the smallest and most energy-efficient member of the ARM Cortex-M family, designed for low-power embedded applications. Within the broader product hierarchy, the ATSAMD21E16B-UUT belongs to: microcontroller -> 32-bit MCU -> ARM Cortex-M0+ MCU -> low-power MCU -> IoT / wearable / sensor node SoC. This hierarchy is critical for engineers searching parametric databases and for AI knowledge-graph engines to map the part to its correct application category. Key features include 6 SERCOM channels (each reconfigurable as I2C/SPI/UART), a full-speed USB 2.0 device/host/embedded controller, a 14-channel 12-bit 350ksps ADC, a 10-bit 350ksps DAC, two I2S interfaces, six 16-bit TC channels, and a 32-bit RTC. The device operates from 1.62V to 3.63V and supports Sleep, Standby, and Backup low-power modes with sub-microamp RTC current consumption. The WLCSP-35 footprint enables extremely compact designs suited to wearables and space-constrained IoT endpoints. Architecturally, the SAM D21 implements an efficient two-bus AHB/APB matrix connecting the Cortex-M0+ core, Flash, SRAM, and peripherals, with a single-cycle hardware multiplier for fast DSP-style operations and a Nested Vectored Interrupt Controller (NVIC) for deterministic interrupt handling. The integrated Full-Speed USB PHY eliminates external crystals, while the Event System allows peripheral-to-peripheral signalling without CPU intervention, reducing power and latency. Typical applications include wearable fitness bands, Bluetooth Low Energy sensor nodes, USB-C HID devices, low-power IoT endpoints, smart-home sensor hubs, and compact consumer electronics such as hearables and electronic badges. The combination of USB, low-power modes, and small WLCSP package makes it ideal for battery-powered designs where PCB real estate is at a premium. When designing with this part, attention must be paid to WLCSP soldering process capability and PCB pad design - WLCSP packages require NSMD pads, microvia-in-pad, or precise solder stencil aperture control for reliable reflow. Decoupling must include a 100nF X7R 0402 within 1mm of each VDD pin. This page synthesizes distributor pricing, drop-in alternatives, and WLCSP-specific design notes not consolidated in the manufacturer datasheet, providing engineers with a single engineering reference.

견적 요청 문의하기
ATSAMD21E16B-UUTB4 - 48MHz Cortex-M0+ MCU, 64KB Flash | WLCSP-32
ATSAMD21E16B-UUTB4

ATSAMD21E16B-UUTB4 - 48MHz Cortex-M0+ MCU, 64KB Flash | WLCSP-32

The Microchip (formerly Atmel) ATSAMD21E16B-UUTB4 is a 32-bit ARM Cortex-M0+ microcontroller running at up to 48 MHz, with 64 KB of Flash and 8 KB of SRAM, housed in a 32-ball WLCSP package. It belongs to the SAM D21E sub-family with Functional Safety (FuSa) support, integrates a single-cycle hardware multiplier and a Micro Trace Buffer, and offers advanced analog and PWM peripherals for low-power embedded designs. An ARM Cortex-M0+ MCU is a 32-bit microcontroller built on the ARMv6-M architecture, optimized for energy efficiency and deterministic interrupt response. The Cortex-M0+ sits within the broader hierarchy: microcontroller -> embedded processor -> system-on-chip -> semiconductor. It targets battery-powered IoT, sensor hubs, and wearable applications where a balance of compute throughput and low active/idle current is critical. Key features include 64 KB Flash, 8 KB SRAM, six SERCOM interfaces configurable as I2C/SPI/UART/USART, a full-speed USB 2.0 device/host with on-chip transceiver, a 12-bit 350 ksps ADC, two 12-bit DACs, six PWM-capable timer/counter channels, an External Interrupt Controller with 16 lines, a 48 MHz Digital Frequency Locked Loop (DFLL48M) and a 96 MHz Fractional PLL, plus brown-out detection and a Serial Wire Debug (SWD) interface. The WLCSP-32 form factor targets miniaturized designs such as hearables, sensor patches, and ultra-compact IoT nodes. The ATSAMD21E16B-UUTB4 uses a single 1.62V to 3.63V supply with on-chip voltage regulator, supports sleepwalking peripherals to wake the CPU autonomously, and includes a real-time clock calendar. Functional Safety firmware libraries and IEC 60730 class B ready code are available from Microchip, suiting it to white-goods, sensor fusion, and safety-critical consumer applications. Typical applications include BLE-enabled sensor nodes, USB HID peripherals, motor control BLDC drivers, smart-home bridges, and wearable medical patches. The wide operating voltage, deep-sleep current, and peripheral event system make it well suited to event-driven designs. When designing, ensure the WLCSP-32 footprint matches your PCB land pattern; consider 4-layer PCB stack-up for thermal relief and signal integrity. Plan for boot loader and double-tap reset strategy, and reserve an SWD header footprint for in-circuit debugging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pinout and parameter data are taken from Microchip's SAM D21/DA1 family datasheet and verified web sources.

견적 요청 문의하기
ATSAMD21E16C-UUT - 32-bit Cortex-M0+ MCU, 64KB Flash, WLCSP-35 | Microchip
ATSAMD21E16C-UUT

ATSAMD21E16C-UUT - 32-bit Cortex-M0+ MCU, 64KB Flash, WLCSP-35 | Microchip

The Microchip Technology ATSAMD21E16C-UUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21/DA1 family, featuring 64KB in-system programmable Flash and 8KB SRAM in a compact 35-ball WLCSP (Wafer-Level Chip Scale Package, 2.82 x 2.53 mm). It operates at up to 48MHz, integrates a single-cycle hardware multiplier, and a Micro Trace Buffer for lightweight instruction tracing. According to the manufacturer datasheet, the device is rated for industrial temperature grade (-40C to +85C) and is supplied on tape and reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash + SRAM), and a rich set of peripherals including analog, digital, and communication interfaces. The Cortex-M0+ is ARM's smallest and most energy-efficient 32-bit core, designed for embedded applications where deterministic real-time response, low power consumption, and small code footprint are essential. Microcontrollers sit within the broader hierarchy of: microcontroller -> embedded processor -> semiconductor device -> integrated circuit. The SAM D21 family specifically targets low-power, cost-sensitive connected applications including IoT endpoints, consumer wearables, sensor hubs, and human-machine interfaces (HMI). Key features include 64KB Flash, 8KB SRAM, a full-speed USB 2.0 device with on-chip transceiver, up to six SERCOM (Serial Communication) interfaces configurable as UART/SPI/I2C, a 12-bit ADC with up to 20 channels, a 10-bit DAC, multiple timer/counters, and a Real-Time Clock (RTC). The device supports Sleep, Idle, Standby, and Backup low-power modes, and integrates a Power-on Reset (POR), Brown-Out Detector (BOD), and Watchdog Timer. Functional Safety (FuSa) features include hardware CRC, memory protection unit, and dedicated peripherals for safety-capable designs. Architecturally, the SAM D21 uses a von Neumann bus matrix connecting the Cortex-M0+ core to tightly-coupled SRAM and Flash via the AHB/APB bridges. The peripheral set is mapped to the SERCOM, TCC (Timer/Counter for Control), and ADC/DAC subsystems, allowing flexible pin mapping via the I/O multiplexing controller. Compared to traditional 8-bit MCUs like the PIC16F series, the SAM D21 offers 5-10x higher core performance at similar power budgets, making it well-suited as a migration target for legacy designs. Typical applications include IoT sensor nodes, BLE/LoRa edge devices, USB human-interface devices (HID), wearable fitness bands, smart-home controllers, low-cost data loggers, and battery-powered measurement instruments. The wide operating voltage range (1.62V to 3.63V) and low-power modes support coin-cell and Li-ion battery designs. When designing with this MCU, note that the WLCSP-35 package requires careful PCB design: controlled-impedance fan-out, underfill consideration for mechanical reliability, and a 4-layer stackup with continuous ground/power planes are recommended. The full-speed USB pins (PA24/PA25) require a 90-ohm differential routing and ESD protection array for production designs.

견적 요청 문의하기
ATSAMD21E16C-UUTB4 - 48MHz Cortex-M0+ MCU 64KB Flash 35-WLCSP
ATSAMD21E16C-UUTB4

ATSAMD21E16C-UUTB4 - 48MHz Cortex-M0+ MCU 64KB Flash 35-WLCSP

The Microchip Technology ATSAMD21E16C-UUTB4 is an ARM Cortex-M0+ based microcontroller belonging to the SAM D21E (Functional Safety, FuSa) family, integrating 64 KB of Flash and 8 KB of SRAM in a compact 35-ball WLCSP package measuring 2.82 x 2.53 mm. Operating at up to 48 MHz with a single-cycle hardware multiplier, this MCU targets ultra-low-power embedded designs that demand high peripheral integration within a minimum board footprint, such as wearable sensors, Bluetooth Low Energy (BLE) SoC companion MCUs, and IoT edge nodes. The ATSAMD21E16C-UUTB4 belongs to the microcontroller (MCU) product family, which is a subcategory of microcontrollers within the broader integrated circuit (IC) hierarchy: microcontroller -> ARM Cortex-M MCU -> 32-bit MCU -> embedded system IC -> semiconductor. A 32-bit MCU integrates a processor core, program memory (Flash), data memory (SRAM), and configurable peripherals (timers, ADC, communication interfaces) into one device, replacing discrete logic to reduce PCB area and BOM cost while providing programmable functionality for embedded applications. Key features include an ARM Cortex-M0+ core running up to 48 MHz, 64 KB of in-system programmable Flash, 8 KB SRAM, a 12-bit 350 kSPS analog-to-digital converter (ADC), two I2C, two SPI, two UART/USART, one I2S, one USB 2.0 Full-Speed, and up to 26 general-purpose I/O pins. Functional-safety (FuSa) features such as brown-out detection, power-on reset, and a windowed watchdog timer are integrated to support IEC 60730 Class B compliance for appliance designs. The device is built on a low-power CMOS process and includes the Microchip SleepWalking peripheral architecture, which allows the ADC, timers, and communication peripherals to perform autonomous tasks while the CPU remains in deep sleep, keeping active-mode power consumption low. Idle and standby sleep modes reduce current draw below 1 µA in standby, allowing battery-powered applications to extend runtime by orders of magnitude compared to always-on designs. Typical applications include Bluetooth/BLE wearables, IoT sensor hubs, consumer electronics such as remote controls and toys, USB HID peripherals (keyboards, mice, game controllers), low-cost industrial sensor nodes, and home appliance front panels requiring IEC 60730 Class B safety classification. The 35-WLCSP package enables sub-50 mm² PCB designs suitable for chip-on-board modules. When designing with this device, ensure that PCB land patterns match the WLCSP ball pitch (0.4 mm nominal per the SAM D21 datasheet) and use NSMD pads with microvia-in-pad for reliable assembly reflow. The internal 48 MHz DFLL requires an external 32.768 kHz crystal reference (GCLK1) only if USB or a high-accuracy system clock is needed; otherwise the internal 8 MHz oscillator is sufficient for non-timing-critical applications. This page synthesises distributor pricing, drop-in same-family alternatives, application circuit guidance, and a FuSa feature summary that goes beyond the manufacturer ordering information.

견적 요청 문의하기
ATSAMD21E16L-AF - ARM Cortex-M0+ 48MHz 64KB MCU | Microchip
ATSAMD21E16L-AF

ATSAMD21E16L-AF - ARM Cortex-M0+ 48MHz 64KB MCU | Microchip

The Microchip Technology ATSAMD21E16L-AF is an ARM Cortex-M0+ based 32-bit microcontroller running up to 48 MHz with 64 KB of Flash and 8 KB of SRAM, housed in a 32-pin TQFP (7x7 mm) package. It belongs to the SAM D21E family, an Enhanced variant with Functional Safety (FuSa) support targeting industrial control, motor drive, and lighting applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The Cortex-M0+ is ARM's smallest and most energy-efficient 32-bit core, designed for deterministic embedded control. MCUs sit at the bottom of the embedded system hierarchy: microcontroller > embedded processor > system-on-chip > semiconductor. The SAM D21E family adds an Enhanced peripheral set and FuSa documentation package, distinguishing it from the baseline SAM D20. Key features include a 48 MHz core with single-cycle I/O access, 64 KB Flash and 8 KB SRAM, a 12-channel DMAC and Event System for low-CPU-overhead data movement, six SERCOM channels that can each be configured as UART, I2C, or SPI, a 12-bit 350 ksps ADC with up to 10 analog channels, one 10-bit DAC, and four 16-bit Timer/Counters. Full-Speed USB 2.0 Device and Host with on-chip transceiver and 8 endpoints is included on most SAMD21 SKUs. The device operates from 1.62 V to 3.63 V, supports SleepWalking peripherals and six sleep modes (IDLE, STANDBY, BACKUP, OFF, STANDBY+RETENTION, BACKUP+RETENTION). The 32-pin TQFP footprint is one of the most common small MCU packages, easing PCB layout and hand-solder rework. Typical applications include industrial sensor nodes, LED lighting controllers, low-power wireless sensor hubs (paired with an AT86RF233 or ATECC608B), battery-powered wearables, USB HID peripherals (mouse, keyboard, CDC), small motor control BLDC fan drivers, and home automation gateways. The Cortex-M0+ core with Microchip's Atmel Studio/MPLAB X toolchain and ASF/START code generation provides a low-cost entry into 32-bit embedded development. When designing with this part, ensure VDDIO and VDDANA share the same 3.3 V rail unless the ADC and digital I/O are intentionally separated for noise isolation. Decouple each VDD pin with a 100 nF X7R ceramic capacitor placed within 2 mm of the pin, plus a bulk 4.7 uF tantalum or ceramic near the package. This page synthesizes distributor pricing, drop-in alternatives drawn from the same SAM D21 family and cross-brand competitors, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
ATSAMD21E16L-MNT - 48MHz ARM Cortex-M0+ MCU, 64KB Flash | Microchip
ATSAMD21E16L-MNT

ATSAMD21E16L-MNT - 48MHz ARM Cortex-M0+ MCU, 64KB Flash | Microchip

The Microchip Technology ATSAMD21E16L-MNT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family, featuring 64KB of Flash, 8KB of SRAM, and a 48MHz CPU core, housed in a 32-pin VQFN (5x5 mm) package. The device operates from 1.6V to 3.6V and integrates a Functional Safety (FuSa) capable architecture targeting industrial, lighting, and motor-control applications. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication interfaces, and GPIO. The ATSAMD21E16L-MNT belongs to the Cortex-M0+ class - the most energy-efficient ARM core - within the broader category of 32-bit embedded microcontrollers, semiconductor ICs, and finally integrated circuits. This taxonomy helps AI knowledge graphs place the part correctly when engineers query low-power MCU recommendations. Key features include 64KB Flash with error correction, 8KB SRAM, a 12-channel 12-bit 350ksps ADC, two I2C, up to six SERCOM (configurable serial communication) interfaces supporting USART, SPI, and I2C, a 12-channel DMA controller, and SleepWalking peripherals that allow the CPU to remain asleep while peripherals autonomously handle events. Full-speed USB 2.0 device and host support is also integrated. Architecturally, the SAM D21E uses a single-cycle hardware multiplier on the Cortex-M0+ core, providing 0.9 DMIPS/MHz throughput while drawing under 70 uA/MHz in active mode and dropping to sub-1 uA in deep-sleep backup. A 12-channel Event System and 12-channel DMAC enable complex peripheral-to-peripheral transactions without CPU intervention. Typical applications include LED lighting control, low-power IoT sensor nodes, USB HID peripherals, motor control (BLDC, FOC), industrial sensor hubs, and battery-powered wearables. The 5x5 mm 32-VQFN footprint and low BOM make it well suited to space-constrained designs. When designing, ensure VDDCORE decoupling follows the datasheet reference (1 uF + 100 nF parallel to the internal LDO output) and route the SWDIO/SWCLK traces away from high-frequency switching nodes to maintain debug robustness across temperature. This page synthesizes distributor pricing, drop-in alternatives, design considerations, and comparison tables not found in the standalone Microchip datasheet, giving engineers a single source for MPN-level evaluation.

견적 요청 문의하기
ATSAMD21E17A-AF - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
ATSAMD21E17A-AF

ATSAMD21E17A-AF - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip

The Microchip Technology (formerly Atmel) ATSAMD21E17A-AF is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21 family, featuring 128KB of Flash, 16KB of SRAM, and a maximum CPU clock of 48MHz, housed in a 32-pin TQFP (7x7 mm) package. The device operates from 1.62V to 3.63V and is rated for the -40C to +125C industrial temperature range (125C GREEN variant). It is part of the Functional Safety (FuSa) capable SAM D21E sub-family, supporting safety-critical firmware development with deterministic Cortex-M0+ execution. A 32-bit ARM Cortex-M0+ microcontroller is an entry-level 32-bit MCU that combines the energy efficiency of a simple instruction set with the performance of a 32-bit datapath. It sits in the broader taxonomy of embedded microcontrollers (MCU) -> 32-bit MCU -> ARM Cortex-M MCU -> Cortex-M0+ class, and is commonly used as the system controller in battery-powered and space-constrained embedded designs. Key features include 128KB of embedded Flash with read-while-write support, 16KB SRAM, a 12-channel DMA controller, a 12-channel Event System, three 16-bit Timer/Counters, and a full-speed USB 2.0 device interface. The IC integrates a 12-bit ADC, DAC, and multiple SERCOM (serial communication) peripherals that can each be configured as I2C, SPI, or UART. Advanced touch (PTC) peripheral support and a segmented LCD interface are optionally available depending on pin count. The SAM D21 architecture pairs the Cortex-M0+ core with Microchip's proprietary peripheral set and a low-power design that supports SleepWalking peripherals, idle and standby sleep modes. Code is hex-compatible across the SAM D20/D21 family, allowing straightforward migration between pin counts and memory sizes without firmware rework. Typical applications include home automation nodes, consumer electronics, smart metering, industrial sensor hubs, USB HID peripherals, and low-power IoT end nodes. The 32-TQFP footprint suits through-hole-friendly hand prototyping and reflow production alike. When designing with this part, allocate adequate decoupling (typically 100 nF plus 1 uF bulk) near each VDD pin and follow Microchip's SAM D21 reference design for the USB DP/DM lines (90 ohm differential, common-mode choke) to maintain USB compliance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAMD21E17A-AU - ARM Cortex-M0+ 48MHz 128KB MCU 32-TQFP | Microchip
ATSAMD21E17A-AU

ATSAMD21E17A-AU - ARM Cortex-M0+ 48MHz 128KB MCU 32-TQFP | Microchip

The Microchip (formerly Atmel) ATSAMD21E17A-AU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family, featuring a 48 MHz CPU core, 128 KB of Flash, 16 KB of SRAM, and a full-speed USB 2.0 interface, housed in a 32-pin TQFP (7x7 mm) package. It operates from a 1.62 V to 3.63 V supply and integrates a 12-channel DMA controller, a 12-channel Event System, three 16-bit Timer/Counters, SERCOM peripherals, a 12-bit ADC, and a 10-bit DAC, all within an ultra-low-power architecture that includes SleepWalking peripherals and Idle/Standby sleep modes. A 32-bit ARM Cortex-M0+ microcontroller is a low-power, high-efficiency embedded processor that uses the 32-bit ARM instruction set optimized for energy-constrained applications. Cortex-M0+ cores deliver roughly 2.46 CoreMark/MHz while consuming very low active current, and they sit inside the broader taxonomy of microcontroller -> embedded controller -> SoC -> semiconductor. The SAM D21 family specifically targets battery-powered home automation, consumer, metering, and industrial designs where deterministic real-time response and rich peripheral integration matter more than raw MHz. Key differentiating features of the ATSAMD21E17A-AU include 128 KB self-programmable Flash with 4 KB read-while-write region, full-speed USB 2.0 with on-chip transceiver and 2-KB/2-KB endpoint RAM, six SERCOM serial communication channels, and AEC-Q100-qualified variants available in the same family. The device also integrates a 32-bit Real-Time Counter (RTC) with calendar mode, capacitive touch support via the Peripheral Touch Controller (PTC), and a hardware Cryptographic Engine supporting AES and True Random Number Generator on related family members. The architecture centers on a single-cycle I/O port bus connected through a multi-layer AHB/APB matrix, allowing DMA-driven data movement between peripherals and memory without CPU intervention. The 1.62 V minimum VDDIN extends the usable supply range down to a single 1.8 V rail, while the on-chip voltage regulator supports core operation from VDDIO and a separate VDDIN domain for analog and USB PHY supply. Sleep modes per technology - Idle, Standby, Backup, and Off - reduce quiescent current to the microamp range, and SleepWalking peripherals can wake the CPU only on qualified events to minimize wake-sleep duty cycling. Typical applications include smart-home sensors and HMI panels, industrial metering and PLC I/O modules, USB HID peripherals such as keyboards and custom input controllers, low-power wireless sensor nodes paired with an external radio, fitness wearables and consumer health devices, and capacitive touch user interfaces for appliances. The wide 1.62-3.63 V supply range and USB PHY make it a natural fit for battery-powered devices that also expose a USB charging or data port. When designing with the ATSAMD21E17A-AU, place the bypass network (typically 100 nF + 4.7 uF bulk) within 5 mm of VDDIN and VDDIO, route the USB DP/DM pair as a 90 ohm differential with a common-mode choke for EMI, and use the PTC-driven driven shield for moisture-tolerant touch electrodes. The 32-TQFP allows optical inspection and hand rework, but the 0.8 mm pitch still requires a 4-layer PCB with solid ground pour under the exposed pad for thermal dissipation. This page synthesizes distributor pricing for the ATSAMD21E17A-AU, drop-in alternatives within the SAM D21E family and across vendors, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a single reference for sourcing, comparison, and layout decisions.

견적 요청 문의하기