ATSAMD21E15C-UUT - 32KB Flash Cortex-M0+ MCU WLCSP-35 | Microchip
부품 번호: ATSAMD21E15C-UUT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.45 | $3.45 |
| 10 | $3.1 | $31.00 |
| 100 | $2.62 | $262.00 |
| 500 | $2.21 | $1,105.00 |
| 1,000 | $1.85 | $1,850.00 |
| 3,000 | $1.62 | $4,860.00 |
ATSAMD21E15C-UUT 개요
A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory, data memory, and peripheral interfaces on a single silicon die. Within the broader semiconductor taxonomy, an MCU sits beneath the system-on-chip (SoC) hierarchy and above general-purpose microprocessors. The ARM Cortex-M0+ is an ultra-low-power 32-bit core optimized for deterministic interrupt response and minimal active/idle energy, making it ideal for battery-powered sensor nodes and human-interface devices. The SAMD21 family is positioned as the mainstream general-purpose line that drops in to SAM D20 sockets while adding richer analog and richer PWM.
Key features include an ARM Cortex-M0+ core at 48MHz, 32KB Flash, 4KB SRAM, a 12-channel Direct Memory Access Controller (DMAC), a 12-channel Event System for inter-peripheral signalling without CPU intervention, Idle and standby sleep modes plus SleepWalking peripherals, a two-pin Serial Wire Debug (SWD) interface, and a one non-maskable interrupt. The device supports an operating voltage of 1.62V to 3.63V and a 32-pin count equivalent in this WLCSP-35 footprint variant.
Architecturally the ATSAMD21E15C leverages an advanced analog front-end with 12-bit ADC and DAC, configurable timer/counter blocks (TC), and SERCOM serial engines that can be mapped to I2C, SPI, or UART on demand. The integrated Power-on Reset (POR) and brown-out detection ensure deterministic startup, while SleepWalking peripherals enable the device to wake on peripheral events without fully waking the CPU.
Typical applications include wearables and fitness bands, low-power wireless sensor nodes (when paired with an external radio), USB human-interface devices, IoT edge nodes, smart-home controllers, and compact consumer products requiring small footprint. The 35-ball WLCSP package enables designs under 25 mm².
When designing with this part, ensure the WLCSP-35 footprint matches PCB pad geometry and that the device is rated for the 85°C operating temperature indicated by the UUT suffix. The WLCSP package typically requires underfill or careful mechanical mounting for harsh-vibration environments.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: ATSAMD21E15C-UUT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMD21E15C-UUT (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Flash Memory, RoHS Status, DAC.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATSAMD21E15B-AU
✅ 드롭인✓ 재고 있음
$1.45 / 개
데이터시트 보기 →ATSAMD21E15B-AFT
✅ 드롭인✓ 재고 있음
$1.96 / 개
데이터시트 보기 →ATSAMD21E16C-UUT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.52 / 개
데이터시트 보기 →ATSAMD21E18A-UUT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATSAML21E15B-MNT
✅ 드롭인✓ 재고 있음
$1.9 / 개
데이터시트 보기 →ATSAMD20G17A-UUT
✅ 드롭인✓ 재고 있음
$2.51 / 개
데이터시트 보기 →ATSAMD21E15C-UUT 최대 정격 & 전기적 특성
| Core | ARM Cortex-M0+ (32-bit) |
| Maximum CPU Frequency | 48 MHz |
| Program Memory (Flash) | 32 KB |
| Data Memory (SRAM) | 4 KB |
| Operating Voltage Range | 1.62 V to 3.63 V |
| 패키지 | 35-ball WLCSP |
| 핀 수 | 35 |
| 동작 온도 | -40 C to +85 C |
| DMAC Channels | 12 |
| Event System Channels | 12 |
| Serial Communication (SERCOM) | Configurable as I2C/SPI/UART |
| Debug Interface | Serial Wire Debug (SWD) |
| Sleep Modes | Idle, Standby, SleepWalking peripherals |
| 실장 유형 | Surface Mount (WLCSP) |
| RoHS 상태 | Compliant (Green) |
ATSAMD21E15C-UUT 핀 구성
| 핀 A1 | VDD — Digital supply voltage |
| 핀 A2 | PA02 — GPIO / analog input |
| 핀 A3 | PA03 — GPIO / analog input / reference |
| 핀 A4 | PA04 — GPIO / SERCOM |
| 핀 A5 | PA05 — GPIO / SERCOM |
| 핀 A6 | PA06 — GPIO / SERCOM |
| 핀 A7 | PA07 — GPIO / SERCOM |
| 핀 B1 | GND — Ground |
| 핀 B2 | PA08 — GPIO / SERCOM / NMI |
| 핀 B3 | PA09 — GPIO / SERCOM |
| 핀 B4 | PA10 — GPIO / SERCOM |
| 핀 B5 | PA11 — GPIO / SERCOM |
| 핀 B6 | PA14 — GPIO / SERCOM |
| 핀 B7 | PA15 — GPIO / SERCOM |
| 핀 C1 | VDDIO — I/O supply voltage |
| 핀 C2 | PA16 — GPIO / SERCOM / TC |
| 핀 C3 | PA17 — GPIO / SERCOM / TC |
| 핀 C4 | PA18 — GPIO / SERCOM |
| 핀 C5 | PA19 — GPIO / SERCOM |
| 핀 C6 | PA22 — GPIO / SERCOM / I2C |
| 핀 C7 | PA23 — GPIO / SERCOM / I2C |
| 핀 D1 | GND — Ground |
| 핀 D2 | PA24 — GPIO / USB D- |
| 핀 D3 | PA25 — GPIO / USB D+ |
| 핀 D4 | PA27 — GPIO |
| 핀 D5 | PA28 — GPIO / Reset |
| 핀 D6 | PA30 — GPIO / SWDIO |
| 핀 D7 | PA31 — GPIO / SWCLK |
| 핀 E1 | VDDANA — Analog supply voltage |
| 핀 E2 | GNDANA — Analog ground |
| 핀 E3 | PB02 — GPIO / SERCOM / ADC |
| 핀 E4 | PB03 — GPIO / SERCOM / ADC |
| 핀 E5 | PB08 — GPIO / SERCOM / I2C |
| 핀 E6 | PB09 — GPIO / SERCOM / I2C |
| 핀 E7 | PB10 — GPIO / SERCOM |
일반적인 애플리케이션
ATSAMD21E15C-UUT 적합 용도: 6 애플리케이션s: Wearable Fitness Bands, Low-Power Wireless Sensor Nodes, USB Human Interface Devices, IoT Edge Sensor Nodes, Smart Home Controllers, Compact Consumer Electronics.
Wearable Fitness Bands
The ATSAMD21E15C-UUT's 35-ball WLCSP package enables wearable fitness band designs under 25 mm² of PCB area. The device's 48 MHz Cortex-M0+ core easily handles heart-rate sensor fusion, step counting algorithms, and BLE radio co-processing when paired with an external module. Its 1.62-3.63 V supply range allows direct Li-Ion battery connection without an additional LDO, and Idle/Standby sleep modes plus SleepWalking peripherals keep average current draw below 50 µA during inactive periods. The 32KB Flash accommodates BLE stack plus application code, while 4KB SRAM is sufficient for sensor buffering and protocol state. Compared to larger QFP packages, the WLCSP-35 reduces board area by approximately 60 percent, critical for wrist-worn form factors.
추천
Low-Power Wireless Sensor Nodes
Battery-powered wireless sensor nodes benefit from the ATSAMD21E15C-UUT's SleepWalking peripherals, which allow the device to wake on sensor events without fully waking the CPU. The 12-channel DMAC enables sensor data movement while the core remains idle, and the 12-channel Event System routes peripheral interrupts without software overhead. Operating from a single 3 V coin cell, the device can sustain multi-year battery life in temperature, humidity, or motion sensing applications. The Cortex-M0+ at 48 MHz easily handles 16-bit sensor data processing and AES-128 encryption for secure telemetry. The WLCSP-35 footprint suits miniaturized sensor packages, while the wide 1.62-3.63 V supply range tolerates battery voltage droop over discharge cycles.
추천
USB Human Interface Devices
The ATSAMD21E15C-UUT integrates a full-speed USB 2.0 device controller that pairs naturally with HID class firmware for keyboards, mice, game controllers, and custom input devices. The 48 MHz Cortex-M0+ core executes USB stack plus HID report handling with ample headroom, while 32KB Flash fits USB descriptor tables plus application code. The 4KB SRAM is sufficient for HID report buffers and protocol state machines. The WLCSP-35 footprint allows ultra-thin peripherals such as stylus tablets and miniature presentation clickers. The integrated Power-on Reset and brown-out detection ensure clean USB enumeration during plug events. Operating temperature of 85 C covers consumer electronics use cases.
추천
IoT Edge Sensor Nodes
IoT edge nodes leverage the ATSAMD21E15C-UUT's configurable SERCOM peripherals to bridge I2C sensors, SPI radios, and UART modems on a single chip. The 48 MHz Cortex-M0+ executes MQTT-SN, CoAP, or lightweight TLS stacks with predictable latency, and 32KB Flash supports firmware-over-the-air (FOTA) bootloaders with dual-bank support. Sleep current in Standby mode drops to single-digit µA, enabling years of battery life on 2x AA cells for remote installations. The 12-channel Event System routes sensor triggers without waking the CPU, while the 12-channel DMAC offloads repetitive data movement. The WLCSP-35 footprint is well-suited to compact sensor enclosures and space-constrained retrofits.
추천
Smart Home Controllers
Smart home controllers benefit from the ATSAMD21E15C-UUT's rich peripheral set, including up to six SERCOM instances that can simultaneously drive I2C sensors, SPI displays, and UART transceivers. The 48 MHz core runs Zigbee or Thread host stacks via external radio modules, while 32KB Flash accommodates application logic and OTA update mechanisms. The integrated 12-bit ADC and DAC support analog sensor interfaces for HVAC, lighting, and security subsystems. Operating from 1.62-3.63 V permits direct USB or wall-adapter powering without intermediate regulators. The WLCSP-35 footprint enables controller designs that fit behind standard wall outlets or in ceiling fixture housings.
추천
Compact Consumer Electronics
Compact consumer products such as e-reader styluses, Bluetooth earbud charging cases, and miniature remote controls benefit from the ATSAMD21E15C-UUT's small WLCSP-35 footprint and rich peripheral integration. The device's 48 MHz Cortex-M0+ core supports capacitive touch sensing through the Peripheral Touch Controller (PTC) and runs UI animations on small OLED displays. Idle/Standby sleep modes plus SleepWalking peripherals minimize power consumption between user interactions, extending battery life in always-on accessories. The integrated Power-on Reset ensures clean cold-start behavior, while the configurable SERCOM block interfaces to Bluetooth Low Energy modules, I2C sensors, and SPI flash memory. The 85 C operating temperature range covers typical consumer use cases including warm enclosed environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAMD21E15C-UUT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAMD21E15B-AU | ATSAMD21E16C-UUT | ATSAML21E15B-MNT | ATSAMD20G17A-UUT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | WLCSP-35 | TQFP-32 | WLCSP-35 (same) | QFN-32 | WLCSP (smaller ball count) |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ (ultra-low-power) | ARM Cortex-M0+ |
| Max CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 64 KB | 32 KB | 128 KB |
| SRAM | 4 KB | 4 KB | 8 KB | 4 KB | 16 KB |
| Operating Voltage | 1.62 V to 3.63 V | 1.62 V to 3.63 V | 1.62 V to 3.63 V | 1.62 V to 3.63 V | 1.62 V to 3.63 V |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
주요 차별점
- Ultra-compact WLCSP-35 footprint under 25 mm² (vs ATSAMD21E15B-AU (TQFP-32))
- Latest revision C silicon with full feature set (vs ATSAMD21E15A (revision A, NRND))
- Drop-in scalability within SAM D21E family (vs ATSAMD21E16C-UUT (WLCSP-35, 64KB Flash))
설계 노트
The 35-ball WLCSP package requires precise PCB land pattern geometry matching the Microchip package outline. Ball pitch is approximately 0.4 mm and ball diameter is 0.25 mm nominal. Use NSMD (non-solder mask defined) pads with a solder mask opening of approximately 0.30 mm to ensure reliable reflow. Microchip recommends a PCB surface finish of ENIG or OSP for best WLCSP solder joint reliability. Avoid placing large components or mechanical fasteners within 2 mm of the WLCSP footprint to prevent package stress during assembly.
Place decoupling capacitors as close as possible to each VDD/VDDIO/VDDANA pin pair. Use a 100 nF ceramic on each digital supply pin and a 1 µF bulk capacitor on VDDANA. The ATSAMD21E15C integrates Power-on Reset (POR) and brown-out detection (BOD) but external decoupling ensures clean supply during high-current SERCOM switching events. Connect all GND balls to a solid ground plane with multiple vias for low-impedance return paths.
Avoid using SERCOM instances 0-5 without first configuring the GCLK (Generic Clock) source. The SAM D21 clock tree requires explicit setup of GCLK generators and channel routing before SERCOM peripherals become functional. The peripheral library (ASF) or Harmony framework provides clock initialization helpers - failing to call these in startup code is the most common cause of 'dead' peripherals on first prototypes. Also note that USB D+/D- pins (PA24, PA25) require a 1.5 kΩ pull-up on D+ for full-speed USB enumeration when used in device mode.
The WLCSP-35 package has limited thermal dissipation compared to QFP/QFN variants. Estimated: at 48 MHz active with all peripherals running, junction temperature rise is below 5°C above ambient under typical indoor conditions. However, in enclosed housings without airflow, monitor for thermal shutdown at sustained 48 MHz operation. The ATSAMD21E15C silicon revision C includes thermal sensor accessible via the SUPC peripheral for software-driven thermal management.
규정 준수 정보
Per Mouser listing, the ATSAMD21E15C-UUT is Green-compliant (RoHS + halogen-free). Not AEC-Q100 qualified - choose ATSAMD21E15C-UUT is not automotive-grade; for automotive applications use SAM V71 or SAM S70 series.
