마이크로컨트롤러

제품 (18744)

ATXMEGA256C3-MH - 256KB Flash 32MHz XMEGA C3 MCU | Microchip
ATXMEGA256C3-MH

ATXMEGA256C3-MH - 256KB Flash 32MHz XMEGA C3 MCU | Microchip

The Microchip Technology ATXMEGA256C3-MH is a high-performance, low-power 8/16-bit AVR XMEGA C3 microcontroller featuring 256 KB in-system programmable Flash (with 8 KB boot code section and read-while-write capability), 4 KB EEPROM, 16 KB SRAM, and a 32 MHz CPU core, housed in a 64-pin QFN (9x9 mm) package. What is an AVR XMEGA microcontroller? The XMEGA family is a modernized successor to the classic 8-bit AVR architecture, combining a 16-bit instruction set with an 8-bit datapath (often described as 8/16-bit). Within the broader taxonomy it sits as: microcontroller -> embedded MCU -> 8/16-bit MCU -> AVR -> AVR XMEGA -> XMEGA C3 series. The C3 sub-series adds high-speed analog and a four-channel event system, positioning it above entry-level ATmega parts in both peripheral count and computational throughput. Key differentiating specifications include 50 general-purpose I/O lines, five 16-bit timer/counters with capture/compare/PWM, a 16-bit real-time counter, a four-channel event system, a programmable multi-level interrupt controller, USB Device and AES/DES crypto engine. The 32 MHz core delivers 32 MIPS with single-cycle execution, while peripheral DMA on 4 channels reduces CPU load for data movement. The architecture integrates an on-chip programmable gain amplifier (PGA), a 12-bit 2 MSPS ADC, a 12-bit 1 MSPS DAC, and multiple communication interfaces including USART, SPI, TWI (I2C), and full-speed USB. The 1.6 V to 3.6 V wide operating voltage and five software-selectable sleep modes with sub-microamp standby current make it well suited to battery-aware designs that need to wake on event. Typical applications include industrial control panels, building automation (HVAC, lighting, metering), USB peripherals (HID, CDC, custom class), motor control boards, handheld battery-powered instruments, factory automation nodes, and medical/clinical devices. The combination of large Flash, integrated crypto, and DMA makes it a strong fit for networked sensor hubs and secure IoT edge nodes. Designers should note that pin count and footprint drive PCB layout decisions. The 64-QFN variant is the highest-density option in the C3 family. Power estimation should include peripheral current draw and clock tree contributions, especially when high-speed peripherals are enabled. This page synthesizes distributor pricing, drop-in alternatives in the same 64-QFN footprint, and practical design notes not assembled on the manufacturer datasheet or distributor catalog pages.

견적 요청 문의하기
ATXMEGA32A4-AU - 32KB Flash 32MHz 8/16-bit AVR XMEGA MCU
ATXMEGA32A4-AU

ATXMEGA32A4-AU - 32KB Flash 32MHz 8/16-bit AVR XMEGA MCU

The Microchip Technology ATXMEGA32A4-AU is a low-power, high-performance 8/16-bit AVR XMEGA A4 microcontroller with 32 KB self-programming Flash, 4 KB SRAM, 1 KB EEPROM, and a 4 KB boot code section, packaged in a 44-pin TQFP (10x10 mm). It runs at up to 32 MHz delivering 32 MIPS throughput, with 34 general-purpose I/O lines, a 4-channel DMA controller, an 8-channel event system, and a programmable multi-level interrupt controller. Operating voltage range is 1.6 V to 3.6 V per the manufacturer datasheet. An AVR XMEGA microcontroller is an advanced 8/16-bit RISC architecture MCU that extends the classic AVR core with a richer peripheral set, DMA-driven I/O, an event system for inter-peripheral signaling, and a more capable interrupt controller, while keeping the AVR instruction set and toolchain compatibility. XMEGA sits above classic ATmega in the Microchip (formerly Atmel) AVR taxonomy, between ATmega and the SAM Cortex-M families in terms of performance and peripheral depth. It targets low-power embedded designs that need deterministic I/O without leaving the AVR ecosystem. Key features include 32 KB in-system programmable Flash with read-while-write support, 1 KB internal EEPROM for non-volatile data, five flexible 16-bit Timer/Counters with compare and PWM modes, two TWI (I2C-compatible) interfaces, five USARTs, two SPI ports, a 16-bit Real-Time Counter (RTC), a 12-channel 12-bit ADC, and AES/DES crypto accelerators. The DMA controller and event system offload repetitive I/O from the CPU, enabling efficient sensor and communication pipelines. The integrated bandgap reference and on-chip temperature sensor simplify analog designs. Architecturally, the A4 series uses the XMEGA core with single-cycle ALU operations, hardware multiplier, and a peripheral event system that allows peripherals to trigger each other without CPU intervention. The result is deterministic low-latency I/O at very low active currents, making the A4 family well suited to battery-powered measurement, sensor hubs, and human-interface products. Typical applications include industrial sensor nodes, smart metering, building automation controllers, low-power wireless sensor hubs (paired with an external radio), USB/HID peripherals, motor control edge nodes, and consumer human-interface devices. Choose the ATXMEGA32A4-AU when you need AVR toolchain continuity with XMEGA-grade peripherals in a 44-pin TQFP. Designers should plan a stable 1.6 V to 3.6 V rail with sufficient decoupling near the AVDD pins, route the event system lines carefully to avoid noise coupling into ADC inputs, and verify the boundary scan / PDI programming interface is accessible for in-system firmware updates. Selecting the A4 family preserves AVR toolchain investment while adding modern peripherals. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
ATXMEGA32C3-MH - 32KB Flash 32MHz 8/16-bit AVR XMEGA MCU | Microchip
ATXMEGA32C3-MH

ATXMEGA32C3-MH - 32KB Flash 32MHz 8/16-bit AVR XMEGA MCU | Microchip

The Microchip Technology ATXMEGA32C3-MH is a high-performance, low-power 8/16-bit AVR XMEGA C3 microcontroller running at 32 MHz, integrating 32 KB of in-system programmable Flash memory (with an 8 KB boot-code section and read-while-write capability), 2 KB EEPROM and 4 KB SRAM, all housed in a 64-pin VQFN (9x9 mm) exposed-pad package. An 8/16-bit microcontroller (MCU) is a single-chip computer built around an 8- or 16-bit data path that integrates a CPU core, non-volatile Flash program memory, volatile SRAM data memory, EEPROM for parameter storage, plus a rich set of on-chip peripherals (timers, ADC/DAC, communication controllers, GPIO). The ATXMEGA32C3 belongs to the XMEGA family in the broader hierarchy: 8/16-bit MCU -> microcontroller -> embedded processor -> semiconductor. It uses the AVR RISC instruction set with hardware multiplier, executes most instructions in a single clock cycle, and is targeted at industrial-grade, low-power embedded designs that need deterministic real-time response. Key features of the ATXMEGA32C3-MH include four flexible 16-bit Timer/Counter modules, a 12-channel event system, a four-channel DMA controller that moves data without CPU intervention, a 12-bit ADC and 12-bit DAC, USB device support, AES/DES crypto acceleration, and an operating voltage range of 1.6 V to 3.6 V. Its 32 MHz core delivers up to 32 MIPS of throughput, and the integrated PicoPower technology reduces active and sleep-mode current. Architecturally, the device pairs an event-driven peripheral fabric with the DMA controller, allowing analog conversion, packet transmission, and timer capture to run autonomously while the CPU sleeps. This architecture is well-suited to deterministic, low-latency control applications such as sensor hubs, motor control, and human-interface subsystems. Typical applications include industrial sensor interfaces, USB-enabled consumer devices, building automation controllers, smart-metering subsystems, and human-machine interface (HMI) panels. The wide 1.6V-3.6V supply range also allows direct battery operation. When designing with this device, ensure the 64-pin VQFN exposed pad is soldered to a sufficient ground copper pour for thermal and electrical performance. Decouple VDD with at least one 100 nF ceramic capacitor per supply pin placed as close as possible to the package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a single reference for engineers evaluating the ATXMEGA32C3-MH for new designs.

견적 요청 문의하기
ATXMEGA32C3-MHR - 32KB Flash 8/16-bit AVR XMEGA MCU 64-QFN
ATXMEGA32C3-MHR

ATXMEGA32C3-MHR - 32KB Flash 8/16-bit AVR XMEGA MCU 64-QFN

The Microchip Technology ATXMEGA32C3-MHR is a high-performance, low-power 8/16-bit AVR XMEGA C3 microcontroller integrating 32 KB of in-system programmable Flash memory (with an 8 KB boot code section that supports read-while-write operation), 2 KB EEPROM, and 4 KB SRAM, housed in a 64-pin 9x9 mm QFN package. It executes instructions in a single clock cycle and reaches up to 32 MHz CPU throughput, delivering nearly 1 MIPS per MHz while keeping active power consumption low. The part supports a 1.6 V to 3.6 V supply range and is qualified for industrial temperature operation. What is an AVR XMEGA microcontroller? The XMEGA family extends Atmel's AVR enhanced RISC architecture into the 8/16-bit microcontroller segment. It belongs to the wider hierarchy: microcontroller (MCU) -> 8/16-bit MCU -> AVR core MCU -> XMEGA family. XMEGA devices are positioned between classic 8-bit AVR microcontrollers and 32-bit ARM Cortex-M parts, offering richer peripherals (DMA, event system, crypto engine on some variants) than classic AVR while retaining a single-cycle RISC core that is simple to program in C. Key features include a four-channel event system for inter-peripheral signaling without CPU intervention, a programmable multi-level interrupt controller, 50 general-purpose I/O pins, a full-speed USB device interface, multiple USART/SPI/TWI peripherals, a 12-bit ADC and DAC, and AES/DES crypto acceleration on selected variants. The 32 KB Flash supports application programming through boot-loader, JTAG, or PDI interfaces. Industrial-grade temperature range (-40C to +85C) and 1.6-3.6 V operation make it suitable for battery-powered and harsh-environment designs. A 12 mA maximum active supply current is specified in the brief, while sleep-mode currents are in the microamp range. Architecturally, the ATXMEGA32C3 uses the AVR enhanced RISC core with a multi-stage pipeline and Harvard bus architecture that allows instruction fetch and memory access to overlap. The four-channel event system routes peripheral triggers (timer, ADC, DMA) directly between peripherals, offloading the CPU. The 64-pin QFN package exposes the full peripheral set and supports up to 50 GPIO lines. Typical applications include industrial control panels, USB human-interface devices (HID), smart sensors with on-board crypto, low-power IoT edge nodes, building automation, and consumer electronics with touch or display interfaces. The AES/DES hardware accelerator enables secure firmware and authenticated sensor links. The part is widely used in designs that migrate from older ATmega MCUs but need more peripherals and lower active power. A key design consideration is decoupling: place 100 nF and 1 uF ceramic capacitors close to each VCC pin and provide adequate ground stitching under the QFN thermal pad to minimize EMI. Program/debug is performed through the PDI (Program and Debug Interface) two-wire protocol rather than JTAG on this device family. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
ATXMEGA32D3-AU - 32MHz 32KB Flash MCU | Microchip Technology
ATXMEGA32D3-AU

ATXMEGA32D3-AU - 32MHz 32KB Flash MCU | Microchip Technology

The Microchip Technology ATXMEGA32D3-AU is a 32 MHz 8/16-bit AVR XMEGA D3 microcontroller with 32 KB flash memory, 2 KB EEPROM, 4 KB SRAM, and 50 general-purpose I/O lines in a 64-pin TQFP package. It operates from 1.6 V to 3.6 V and is specified for industrial temperatures from -40°C to +85°C. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, data memory, peripherals, and I/O into one device. The ATXMEGA32D3 belongs to the XMEGA family, which extends the 8-bit AVR architecture with 16-bit peripherals, a four-channel event system, a programmable multi-level interrupt controller, and five flexible 16-bit timer/counters. It is positioned between basic 8-bit controllers and larger 32-bit application processors. The verified device specifications include 32 KB of ISP flash organized as 16K x 16, including a 4 KB boot-code section with read-while-write capability. It also provides 2 KB EEPROM and 4 KB SRAM. The peripheral set includes a 16-bit real-time counter, PWM-capable timers, and a four-channel event system, making the device suitable for embedded control, mixed-signal monitoring, and communication-intensive designs. The ATXMEGA32D3 uses an 8/16-bit AVR RISC processor and reaches a maximum clock frequency of 32 MHz. Its operating range of 1.6 V to 3.6 V supports low-voltage designs, while the industrial temperature rating supports equipment operating from -40°C to +85°C. The 64-TQFP package measures 14 x 14 mm and is supplied in trays of 90 units according to the verified Microchip listing. Typical applications include industrial automation and control, sensor acquisition, motor and actuator control, low-power embedded products, communications equipment, and consumer accessories. Engineers should confirm clock, peripheral, programming, and decoupling requirements against the complete manufacturer documentation before releasing a PCB. A key design consideration is that the 32 KB flash capacity can constrain application size, while the XMEGA D3 peripheral set can reduce the need for external interface devices. The 64-pin TQFP footprint is relatively easy to route and inspect, although fine-pitch soldering and careful power-supply decoupling still require attention. This page consolidates verified distributor inventory, manufacturer specifications, package details, and practical engineering context. It also distinguishes direct pin-compatible choices from merely comparable devices so sourcing decisions are based on an actual footprint and parameter review.

견적 요청 문의하기
ATXMEGA32D3-MH - 32MHz 32KB Flash AVR XMEGA D3 MCU | Microchip
ATXMEGA32D3-MH

ATXMEGA32D3-MH - 32MHz 32KB Flash AVR XMEGA D3 MCU | Microchip

The Microchip Technology ATXMEGA32D3-MH is an 8/16-bit AVR XMEGA D3 microcontroller integrating 32KB of in-system programmable Flash, 2KB EEPROM, and 4KB SRAM in a 64-lead QFN (9x9 mm) package. It operates at up to 32 MHz from a 1.6V to 3.6V supply, runs the high-performance 8/16-bit AVR RISC core, and exposes up to 50 general-purpose I/O pins together with a four-channel event system, programmable multi-level interrupt controller, and full-speed USB device support. According to the Microchip product page for ATxmega32D3, the part is positioned as a low-power, high-performance member of the AVR XMEGA family. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working memory (SRAM), non-volatile data storage (often EEPROM), and a rich set of peripherals such as timers, ADC/DAC, communication controllers (USART/SPI/TWI), and GPIO. The AVR XMEGA family sits between legacy 8-bit AVR MCUs and 32-bit ARM Cortex-M devices in Microchip's portfolio, offering deterministic interrupt latency, an advanced event system for inter-peripheral signaling without CPU involvement, and DMA for memory-to-peripheral transfers. ATXMEGA32D3-MH fits this hierarchy as: microcontroller -> 8/16-bit MCU -> AVR XMEGA -> D3 family. Key features that matter to embedded engineers are the 32 KB ISP Flash with read-while-write capability, 2 KB EEPROM for non-volatile data, 4 KB SRAM, an integrated full-speed USB 2.0 device controller with on-chip transceiver, a 12-channel 12-bit ADC with optional PGA, and four USART, two TWI (I2C), and two SPI ports. The 32 MHz maximum core clock (achievable from an internal 32 MHz oscillator) gives up to 32 MIPS of throughput, while the four-channel event system enables deterministic peripheral-to-peripheral signaling without CPU intervention. Architecturally the device uses a two-stage pipeline and a 16-bit instruction word, which is why Microchip markets the core as 8/16-bit - the ALU operates on 8-bit data, but instructions and program memory are organized as 16-bit words. The 4KB boot loader section in the top of Flash (U1A1 terminology) lets designers implement secure firmware update. Multiple sleep modes down to <1 uA in power-down with RTC running suit a rugged, low-power industrial design. Typical applications include USB Human Interface Devices (HID) such as keyboards, mice, and game controllers, industrial sensor hubs and motor-control front ends, building automation controllers, smart metering, and low-power portable instrumentation that benefits from the on-chip 12-bit ADC. The 64-pin QFN package is well suited to compact designs where routing density matters. A design consideration to keep in mind: because the ATXMEGA32D3-MH operates from 1.6V to 3.6V, the I/O are NOT 5V tolerant and the part will be damaged if exposed to 5V logic. Level shifters are required when interfacing to 5V peripherals. This page synthesizes distributor pricing, package-level drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
ATXMEGA64A3-AU - 64KB Flash AVR XMEGA A3 MCU 32MHz TQFP-64 | Microchip
ATXMEGA64A3-AU

ATXMEGA64A3-AU - 64KB Flash AVR XMEGA A3 MCU 32MHz TQFP-64 | Microchip

The Microchip Technology ATXMEGA64A3-AU is an 8/16-bit AVR XMEGA A3 microcontroller delivering 32 MIPS throughput at 32 MHz, with 64 KB of in-system programmable Flash, 4 KB SRAM, 2 KB EEPROM, and 4 KB boot code section, housed in a 64-pin TQFP (14x14 mm) package. It integrates a 4-channel DMA controller, an 8-channel event system, a programmable multi-level interrupt controller, and a 16-bit Real Time Counter (RTC). The device operates from 1.6 V to 3.6 V, making it suitable for both battery-powered and 3.3 V regulated rails. An AVR XMEGA microcontroller is a high-performance 8/16-bit RISC architecture that extends the classic AVR core with a wider instruction set, hardware multiplier, and rich on-chip peripherals. Within the broader taxonomy, the ATXMEGA64A3 belongs to the XMEGA A3 family, which is the general-purpose branch of the XMEGA line designed for low-power embedded control with deterministic interrupt handling and event-driven peripherals. The XMEGA core architecture (AVR -> 8-bit MCU -> microcontroller -> semiconductor) achieves 1 MIPS per MHz efficiency, so a 32 MHz clock produces 32 MIPS of compute, an attractive ratio for power-constrained designs. Key features include 50 general-purpose I/O lines, seven 16-bit Timer/Counters with PWM and compare modes, seven USARTs, two two-wire interfaces (TWI/I2C), two SPI peripherals, a 12-bit ADC and 12-bit DAC, a four-channel DMA controller, and a cryptographic AES/DES engine. The self-programmable Flash supports Read-While-Write, allowing firmware updates without halting application code execution, while the on-chip boot section enables secure bootloader-based field upgrades. The 64-pin TQFP (14x14 mm) is a mature surface-mount package with reliable manufacturability and good thermal performance for moderate-power designs. The 1.6 V minimum supply extends the part into single-cell Li-ion (nominally 3.7 V) and energy-harvesting applications, while the on-chip peripherals reduce external component count. The architecture's deterministic interrupt latency and peripheral event system make it particularly well suited to real-time control loops. Typical applications include industrial sensor hubs, building automation controllers, smart metering nodes, USB device bridges, HMI panels with TFT drives, and low-power wireless sensor nodes. Designers typically select this part when they need deterministic event handling, generous on-chip peripherals, and the flexibility of a self-programmable Flash with bootloader support, all at low supply voltage. When designing with this device, ensure that VDDCORE is properly decoupled and that PDI/PDO programming lines are accessible on the board for in-system programming. The XMEGA event system routes peripheral triggers without CPU intervention, so designers should map out event channels before committing to a final pinout. Peripherals not in use should be clock-gated via the PR register to minimize power draw in sleep modes. This page synthesizes distributor pricing, drop-in XMEGA A3 alternatives, package-aware comparison, and design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
ATXMEGA64A4U-AU - 64KB Flash 32 MIPS AVR XMEGA MCU | Microchip
ATXMEGA64A4U-AU

ATXMEGA64A4U-AU - 64KB Flash 32 MIPS AVR XMEGA MCU | Microchip

The Microchip Technology ATXMEGA64A4U-AU is a low-power, high-performance 8/16-bit AVR XMEGA A4U microcontroller delivering up to 32 MIPS throughput at 32 MHz, with 64 KB of self-programming Flash, 4 KB SRAM, 2 KB EEPROM and a 4 KB boot code section, housed in a 44-pin TQFP package rated for industrial temperature (-40C to +85C) operation from 1.6 V to 3.6 V. An AVR XMEGA microcontroller is a member of the 8/16-bit RISC microcontroller family that combines an enhanced Harvard architecture with rich on-chip peripherals such as DMA, an event system and a USB 2.0 Full-Speed controller. In the broader taxonomy it sits under MCU -> RISC microcontroller -> embedded controller -> semiconductor. The XMEGA series is engineered for deterministic, low-latency I/O handling at modest clock rates while keeping active and sleep current far below typical ARM Cortex-M parts. Key features include a 4-channel DMA controller, an 8-channel peripheral event system that lets peripherals trigger each other without CPU intervention, a hardware AES/DES crypto engine, a 12-bit 1 MSPS ADC, two 12-bit DACs and an integrated USB 2.0 Full-Speed device/host controller. The device also exposes an external bus interface for memory-mapped peripherals and provides up to 34 programmable I/O pins with configurable drive strength and slew-rate control. The A4U die is implemented on a low-leakage CMOS process, and the core supports 136 new instructions including hardware multiply, single-cycle GPIO access and atomic bit manipulation. The integrated peripheral event system routes peripheral-to-peripheral triggers across the device with deterministic sub-microsecond latency, allowing sensor data acquisition and PWM updates to occur while the core sleeps, dramatically lowering average power for battery-powered designs. Typical applications include USB human-interface devices such as keyboards, mice and game controllers, industrial sensor hubs, portable medical monitors, USB-to-UART bridge dongles, low-power IoT edge nodes and battery-backed data loggers. The wide 1.6 V to 3.6 V supply range is well suited to single-cell Li-ion and 2xAA chemistries. When designing with this part, place the 0.1 uF VCC decoupling caps adjacent to each power pin and follow the USB DP/DN 90-ohm differential layout rules to maintain USB-IF compliance. The internal 32 kHz calibrated oscillator can serve as the RTC source without an external crystal for cost-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives within the XMEGA family and practical design notes not aggregated by DigiKey, Mouser or Octopart.

견적 요청 문의하기
ATXMEGA64A4U-MH - 64KB Flash XMEGA A4U 32MHz MCU | Microchip
ATXMEGA64A4U-MH

ATXMEGA64A4U-MH - 64KB Flash XMEGA A4U 32MHz MCU | Microchip

The Microchip Technology (formerly Atmel) ATXMEGA64A4U-MH is a low-power, high-performance 8/16-bit AVR XMEGA A4U microcontroller integrating 64 KB of self-programming Flash, 4 KB boot code section, 4 KB SRAM, and 2 KB EEPROM in a 44-pin VQFN (7x7) package. It runs up to 32 MHz, supports an operating voltage range of 1.6 V to 3.6 V, and exposes 34 general-purpose I/O lines plus an external bus interface for memory-mapped peripherals. An XMEGA A4U microcontroller is a member of the AVR enhanced RISC architecture family aimed at low-power, peripheral-rich embedded designs. Within the broader hierarchy, the ATXMEGA64A4U-MH sits between classic ATmega 8-bit MCUs (simpler peripherals, lower DMA integration) and ARM Cortex-M devices (higher MIPS, wider 32-bit datapath). The XMEGA line is purpose-built for deterministic event-driven control with hardware-accelerated data movement, bridging the gap between traditional 8-bit AVR and 32-bit ARM designs. Key features include a four-channel DMA controller that offloads memory-to-peripheral transfers, an eight-channel event system that routes peripheral triggers without CPU intervention, and a programmable multi-level interrupt controller for prioritized response. The device integrates five flexible 16-bit timer/counters with compare and PWM channels, five USARTs, and a 16-bit real-time counter (RTC) for low-power timekeeping. Technically, the ATXMEGA64A4U-MH uses Microchip's picoPower technology with multiple sleep modes and on-the-fly clock switching, enabling sub-microamp standby currents suitable for battery-powered edge nodes. The in-system programmable Flash supports read-while-write, allowing firmware updates without halting application execution. Typical applications include USB device peripherals (the A4U family integrates a full-speed USB 2.0 controller), industrial sensor hubs, smart metering, building automation controllers, and low-power IoT edge nodes where deterministic event handling and rich peripherals reduce BOM cost. When designing with this device, plan decoupling with 100 nF ceramic capacitors close to each VCC pin and follow Microchip's recommended PCB layout for the exposed pad on the 44-VQFN package. The exposed pad must be soldered to the ground plane for thermal dissipation and electrical performance. This page synthesizes verified distributor pricing, drop-in VQFN-44 alternatives from the same XMEGA family, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
ATXMEGA64C3-MH - AVR XMEGA 32MHz 64KB Flash MCU | Microchip
ATXMEGA64C3-MH

ATXMEGA64C3-MH - AVR XMEGA 32MHz 64KB Flash MCU | Microchip

The Microchip Technology (formerly Atmel) ATXMEGA64C3-MH is an 8/16-bit AVR XMEGA C3 microcontroller featuring 64KB in-system programmable Flash (with an 8KB boot section supporting read-while-write), 2KB EEPROM, and 4KB SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. An 8/16-bit microcontroller is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (SRAM), non-volatile data storage (EEPROM), and programmable peripherals on one die. Within the system hierarchy, the ATXMEGA64C3-MH sits as: microcontroller -> embedded MCU -> semiconductor IC. The XMEGA family is a superset of the AVR core architecture, adding a 4-channel event system, multi-level interrupt controller, and DMA controller to enable low-latency deterministic I/O without CPU intervention. Key features include 32 MHz maximum CPU clock from an internal 32 MHz calibrated oscillator (2% accuracy), 1.6V to 3.6V operating voltage, four 16-bit timer/counters, four USARTs, two I2C and SPI ports, a 12-channel 12-bit ADC, and a 2-channel 12-bit DAC. The device supports up to 78 general-purpose I/O pins and consumes only 9.2 mA active at 3V/32 MHz, making it suitable for battery-powered designs. Architecturally, the ATXMEGA64C3-MH implements the Harvard-style AVR XMEGA core with single-cycle ALU access to register file and Flash, a hardware multiply unit, and a peripheral event system that lets timers, ADCs, and communication peripherals trigger one another without software. The 12-bit ADC achieves up to 300 ksps with optional PGA-like input scaling, supporting sensor and instrumentation signal chains. Typical applications include industrial control and sensor nodes, USB HID/CDF bridges using the on-chip USB 2.0 full-speed controller, smart energy metering, motor control loops, and human-machine interface (HMI) boards. The wide operating voltage and Flash read-while-write capability also enable firmware-over-the-air (FOTA) bootloaders. When designing with this part, ensure decoupling of all VDDGND pairs with 100nF X7R ceramic capacitors placed within 3 mm of the package, route the exposed thermal pad to a continuous ground plane for VQFN heat dissipation, and configure PDI/PDO or JTAG pins as GPIO only when debug is permanently disabled. This page synthesizes distributor pricing, drop-in alternatives within the same VQFN-64 footprint, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
ATXMEGA64D3-MH - 64KB Flash 32MHz AVR XMEGA D3 MCU | Microchip
ATXMEGA64D3-MH

ATXMEGA64D3-MH - 64KB Flash 32MHz AVR XMEGA D3 MCU | Microchip

The Microchip Technology ATXMEGA64D3-MH is a high-performance, low-power 8/16-bit AVR XMEGA D3 microcontroller with 64 KB of in-system programmable Flash, 2 KB EEPROM, 4 KB SRAM, and a 32 MHz CPU clock, housed in a 64-pin QFN (9x9 mm) package with exposed pad. The device operates from 1.6 V to 3.6 V and integrates a four-channel event system, programmable multi-level interrupt controller, and a rich peripheral set aimed at embedded control designs. An 8/16-bit AVR XMEGA microcontroller is a member of the reduced instruction-set computing (RISC) family of microcontrollers that executes most instructions in a single clock cycle. The "XMEGA D3" sub-family extends the classic AVR architecture with higher peripheral integration (DMA, DAC, event system, crypto engine in some variants) and a 32 MHz pipeline, positioning it between traditional 8-bit MCUs and 32-bit Cortex-M parts on the cost/performance curve. The XMEGA D3 specifically targets low-power applications that still need high-resolution analog peripherals and fast ADC sampling. Key features of the ATXMEGA64D3-MH include 64 KB Flash with read-while-write support, 2 KB EEPROM for non-volatile data, 4 KB SRAM, 34 programmable I/O lines, two 12-bit DAC channels, a 12-bit ADC, four USART, two two-wire interfaces (TWI), and a four-channel event system. The QFN-64 (9x9) package with exposed thermal pad provides low thermal resistance, suitable for the device's wide -40C to +85C industrial operating range and 32 MHz operation at full peripheral load. Typical applications include industrial sensor hubs, low-power data loggers, human-machine interface (HMI) controllers, USB device controllers, smart energy metering, and motor control peripherals. Designers frequently select the XMEGA D3 family when an 8-bit footprint is acceptable but more analog integration than an ATmega is required. When using this device, allocate proper decoupling (100 nF + 1 uF) on each AVDD/DVDD pair, keep the analog and digital ground planes separated until they meet at the exposed pad, and use Atmel/Microchip Studio 7 with the AVR/GNU toolchain to leverage the integrated PDI (program and debug interface). The MH suffix indicates QFN-64 (9x9 mm) industrial temperature grade. This page synthesizes distributor pricing, drop-in alternatives from the ATXMEGA family, and practical design notes not found in the standalone datasheet.

견적 요청 문의하기
ATXMEGA64D3-MHR - 32MHz 64KB Flash AVR XMEGA D3 MCU | Microchip
ATXMEGA64D3-MHR

ATXMEGA64D3-MHR - 32MHz 64KB Flash AVR XMEGA D3 MCU | Microchip

The Microchip Technology ATXMEGA64D3-MHR is a high-performance, low-power 8/16-bit AVR XMEGA D3 microcontroller combining 64 KB of in-system programmable Flash memory (with 4 KB boot code section and read-while-write capability), 2 KB of EEPROM, and 4 KB of SRAM, housed in a 64-pin VQFN (QFN) package measuring 9x9 mm with an exposed thermal pad. An 8/16-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory, and peripherals on a single die; the XMEGA family sits within Microchip's broader AVR microcontroller hierarchy, which extends from tiny 8-pin ATtiny devices up to multi-MB SAM ARM Cortex-M parts. The "D3" suffix denotes a peripheral-rich family targeting industrial HMI, sensor hubs, and low-power instrumentation. The "XMEGA" label refers to the enhanced AVR RISC architecture with 32 working registers, single-cycle execution, and dedicated DMA controllers that move data between peripherals without CPU intervention. Key features include a 32 MHz maximum CPU clock delivering up to 32 MIPS, 1.6 V to 3.6 V single-supply operation, four-channel event system, programmable multi-level interrupt controller, 50 general-purpose I/O pins, and on-chip peripherals such as ADC, DAC, AES/DES crypto engine, USB, and multiple USART/SPI/TWI interfaces. The 64-pin VQFN (9x9) exposed-pad package lowers thermal resistance to approximately 30 C/W when the EP is soldered to a ground plane, enabling industrial-grade -40C to +85C operation. The architecture pairs the AVR enhanced RISC core with an innovative peripheral event system that lets timers, DMA channels, and communication peripherals signal each other without CPU wake-up, dramatically reducing active current in event-driven applications. Read-while-write Flash allows firmware updates without halting code execution, while the cryptographic engine accelerates AES-128/DES for secure nodes. Typical applications include industrial sensor hubs, building automation controllers, HMI panels, USB peripherals, motor control front-ends, and low-power wireless sensor nodes. The wide 1.6 V to 3.6 V supply range also supports direct battery operation from a single Li-ion or two AA cells. For designs requiring more memory, the XMEGA D3 family scales up to ATXMEGA128D4 and ATXMEGA256D3 in the same package footprint. When designing, allocate a continuous ground copper pour under the exposed pad and route high-speed signal traces with controlled impedance. The XMEGA D3 supports Atmel Studio / Microchip Studio 5.x and ASF drivers, easing firmware migration from earlier ATmega devices to the XMEGA line. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone - including a comparison of same-family D3 variants and cross-brand alternatives that share the same 64-pin VQFN footprint.

견적 요청 문의하기
ATXMEGA64D4-AU - 32MHz 64KB AVR MCU | Microchip
ATXMEGA64D4-AU

ATXMEGA64D4-AU - 32MHz 64KB AVR MCU | Microchip

The Microchip Technology ATXMEGA64D4-AU is a high-performance 8/16-bit AVR XMEGA D4 microcontroller with 32 MHz operation, 64 KB flash memory, 2 KB EEPROM, 4 KB SRAM, and 34 general-purpose I/O lines. It is housed in a 44-pin TQFP package measuring 10 mm by 10 mm. The device targets embedded systems requiring broad serial connectivity, timing, analog, and event-driven control without the memory footprint of a larger 32-bit MCU. An 8/16-bit microcontroller is a compact embedded controller that executes instructions from internal program and data memory while integrating peripherals for communication, timing, interrupts, and signal control. In the broader device hierarchy, the ATXMEGA64D4-AU belongs to the AVR family, the XMEGA D4 subfamily, and ultimately the semiconductor and embedded-control categories. Its enhanced RISC architecture supports predictable instruction throughput suitable for motor, communications, instrumentation, and industrial control designs. Verified device features include read-while-write in-system-programmable flash, a 4 KB boot-code section, a four-channel event system, a programmable multilevel interrupt controller, four flexible 16-bit timer/counter blocks, a 16-bit real-time counter, two USARTs, two two-wire serial interfaces, and additional connectivity documented in the AVR XMEGA D4 datasheet. This peripheral mix supports simultaneous sensor acquisition, actuator timing, serial links, and event-based signal routing. The ATXMEGA64D4-AU combines 64 KB of flash with only 4 KB of SRAM, making flash utilization and interrupt timing important design considerations. Firmware should use the documented memory regions carefully, avoid unnecessary blocking routines, and reserve SRAM for stacks, buffers, and time-critical data. In-system programming and read-while-write operation can simplify firmware updates, although application code must observe the device's program-memory execution restrictions. Typical applications include industrial control panels, sensor hubs, motor-control peripherals, data-acquisition modules, building-control nodes, low-power serial gateways, and compact embedded instruments. The 34 I/O lines allow connection of sensors, displays, communications transceivers, and actuators while retaining dedicated peripheral functions. Compared with simpler 8-bit MCUs, the XMEGA D4 architecture offers higher clock speed and a broader peripheral set; compared with higher-end 32-bit MCUs, it offers a simpler control-oriented architecture and lower memory capacity. Designers should verify every package pin, alternate-function mapping, voltage domain, and peripheral limit against the manufacturer datasheet before layout release. The -AU ordering information identifies the 44-pin TQFP device, but package suffixes, temperature grades, clock options, and programmed variants must be checked during procurement. A hardware design should preserve the recommended decoupling, programming-interface access, clock stability, and exposed-ground layout practices specified by Microchip. This page consolidates the verified manufacturer and distributor information for ATXMEGA64D4-AU with engineering-focused selection guidance. It distinguishes documented capabilities from unavailable details, emphasizes the 32 MHz and 64 KB memory limits, and avoids treating functionally similar MCUs as verified drop-in replacements. For sourcing, use the linked distributor records to confirm current inventory, price, delivery, and exact suffix handling.

견적 요청 문의하기
ATXMEGA8E5-AN - 32MHz 8KB AVR Microcontroller | Microchip
ATXMEGA8E5-AN

ATXMEGA8E5-AN - 32MHz 8KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA8E5-AN is a low-power, high-performance 8/16-bit AVR XMEGA E5 microcontroller with a 32 MHz maximum clock, 8 KB flash memory, 512 bytes EEPROM, 1 KB SRAM, and eight-channel event-system support, housed in a 32-pin TQFP package. The -AN suffix identifies the specified Microchip ordering configuration, while the family datasheet is titled ATxmega32E5/16E5/8E5 Data Sheet. A microcontroller is a programmable embedded-control IC that integrates a processor core, memory, timers, communication interfaces, and peripherals on one device. The AVR XMEGA E5 belongs to the 8/16-bit AVR enhanced RISC microcontroller family, combining low-power operation with event-driven control and read-while-write flash support. This makes it useful for compact control systems that need deterministic timing and flexible peripheral interconnection. The ATXMEGA8E5-AN combines 8 KB ISP flash with an additional 2 KB boot-code section, 512 bytes EEPROM, and 1 KB SRAM. Its operating supply range is listed by Mouser as 1.6 V to 3.6 V, with an operating-temperature marking of 105C. The family documentation identifies a 32-pin device configuration, while the distributor listings identify this exact orderable part as ATXMEGA8E5-AN in a 32-TQFP package. The ATXMEGA family is intended for applications where compact code execution, EEPROM retention, and event-system peripherals are valuable. The eight-channel event system is a key architectural feature. It allows hardware peripherals and external signals to communicate through event resources, reducing the need for polling and helping coordinate timing-sensitive tasks. The integrated memory arrangement also supports firmware storage, boot loading, and working data in a single controller. Compared with a larger general-purpose MCU, the ATXMEGA8E5-AN offers a focused 8/16-bit platform with a small memory footprint and a 32 MHz clock. Typical uses include industrial automation, sensor and actuator control, compact embedded instruments, motor-control support, communication-interface designs, and low-power control nodes. The exact peripheral mix, electrical limits, programming requirements, and package pin details should be confirmed against the Microchip family datasheet and the ATXMEGA8E5-AN ordering information before final PCB release. Designers should preserve the required decoupling, oscillator layout, programming access, and unused-pin treatment recommended by the manufacturer. Firmware should be built for the ATxmega8E5 device definition and validated with the intended clock source and supply voltage. Because this page is assembled from distributor listings and the family datasheet, package suffixes and purchasing conditions should be checked against the latest authorized source. This page combines verified distributor specifications, the official Microchip product description, family datasheet information, application guidance, and sourcing links to support component selection and engineering review.

견적 요청 문의하기
ATXMEGA8E5-MN - 32MHz 8KB AVR Microcontroller | Microchip
ATXMEGA8E5-MN

ATXMEGA8E5-MN - 32MHz 8KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA8E5-MN is a low-power 8/16-bit AVR XMEGA microcontroller with a 32 MHz clock, 8 KB flash memory, 512 bytes of EEPROM, 1 KB SRAM, and a 32-pin 5 x 5 mm QFN package. The -MN ordering identifies the manufacturer-specified package and temperature variant. Its operating supply range is 1.6 V to 3.6 V, making it appropriate for compact embedded systems that need deterministic control, event-based peripherals, and low-power operation. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals in one embedded device. The AVR XMEGA family sits within the broader hierarchy of microcontrollers, embedded processors, and semiconductors. Compared with a general-purpose host processor, the ATXMEGA8E5-MN is intended for real-time control, sensor conditioning, communications, and compact control systems where deterministic execution and low power consumption matter more than desktop-class performance. Verified manufacturer information identifies 8 KB of ISP flash with read-while-write capability, a separate 2 KB boot-code section, 512 bytes of EEPROM, 1 KB of SRAM, and an eight-channel event system. The 8/16-bit AVR architecture and 32 MHz operating frequency provide a capable control platform without requiring a large external memory system. The device also offers programmable multi-level interrupt handling according to the manufacturer product-page snippet. The QFN package supports compact PCB layouts but requires careful land-pattern, thermal-pad, paste, and assembly planning. The QFN package is associated with surface-mount assembly rather than through-hole insertion, so the footprint, exposed thermal pad, solder mask, and manufacturing process must match the selected package variant. Exact pin names, electrical limits, peripheral channels, and timing values that were not supplied in the verified data are not inferred here. Typical application roles include compact industrial controllers, low-power sensor nodes, motor and actuator control, communications equipment, and embedded control modules. The ATXMEGA8E5-MN is best suited when the system needs AVR firmware compatibility, modest flash and SRAM capacity, EEPROM retention, and event-driven control rather than high-speed networking or large application workloads. Before finalizing a design, verify the complete manufacturer datasheet for pin assignments, clock requirements, peripheral availability, programming mode, absolute maximum ratings, and package-specific land geometry. The ATXMEGA8E5-MN is a leaded-free, green-compatible ordering option according to the distributor result, but full environmental and automotive qualification claims require confirmation from the manufacturer documentation.

견적 요청 문의하기
ATXMEGA8E5-MU - 32MHz 8KB Flash 32-QFN Microcontroller | Microchip
ATXMEGA8E5-MU

ATXMEGA8E5-MU - 32MHz 8KB Flash 32-QFN Microcontroller | Microchip

The Microchip Technology ATXMEGA8E5-MU is an 8/16-bit AVR XMEGA E5 microcontroller with a 32 MHz maximum clock, 8 KB in-system programmable Flash, 1 KB SRAM, and 512 bytes of EEPROM in a 32-QFN 5x5 mm package. It also includes an eight-channel event system and programmable multi-level interrupt support for responsive peripheral control. A microcontroller is a programmable integrated circuit that combines a CPU core, nonvolatile program memory, working memory, and peripherals on one die. Within the semiconductor hierarchy, the ATXMEGA8E5 belongs to the 8/16-bit microcontroller class and uses the AVR enhanced RISC architecture. It is suited to compact embedded-control systems that require deterministic timing, flexible event handling, and low-power operation without a separate external memory interface. Key features include 8 KB of self-programmable Flash plus a 2 KB boot-code section, 1 KB of SRAM, 512 bytes of EEPROM, read-while-write capability, and operation up to 32 MHz. The 32-QFN package supports compact surface-mount layouts while providing the pin count associated with the XMEGA E5 family's peripheral-rich 32-pin devices. The family is also supported by the manufacturer product page and family data sheet. Technically, the device combines a high-performance 8/16-bit AVR processor with dedicated event-system and interrupt resources. The event system allows peripherals to trigger actions without relying on software polling, which can reduce CPU latency in timing-sensitive designs. Its boot section supports in-system self-programming, while the EEPROM provides nonvolatile parameter storage separate from program Flash. Typical uses include compact industrial controllers, low-power sensor nodes, embedded timing modules, communication peripherals, and consumer-control products. Designers should select external decoupling, clock, and programming support according to the manufacturer data sheet, and verify every board-level signal against the package pinout before layout release. A key design consideration is the limited 8 KB Flash and 1 KB SRAM budget. Firmware and buffers should be sized conservatively, while avoiding blocking delays in event-driven control loops. The device is also available in a TQFP form, so package suffix and land pattern must not be interchanged. This page consolidates verified manufacturer and distributor information, purchase-oriented pricing, and application-specific engineering guidance so engineers can assess the ATXMEGA8E5-MU before committing a PCB layout.

견적 요청 문의하기
ATXMEGA8E5-MUR - 32MHz 8KB Flash 32-QFN Microcontroller | Microchip (Tape & Reel)
ATXMEGA8E5-MUR

ATXMEGA8E5-MUR - 32MHz 8KB Flash 32-QFN Microcontroller | Microchip (Tape & Reel)

The Microchip Technology ATXMEGA8E5-MUR is an 8/16-bit AVR XMEGA E5 microcontroller with a 32 MHz maximum clock, 8 KB in-system programmable Flash, 1 KB SRAM, and 512 bytes of EEPROM in a 32-QFN 5x5 mm package. It also includes an eight-channel event system and programmable multi-level interrupt support for responsive peripheral control. A microcontroller is a programmable integrated circuit that combines a CPU core, nonvolatile program memory, working memory, and peripherals on one die. Within the semiconductor hierarchy, the ATXMEGA8E5 belongs to the 8/16-bit microcontroller class and uses the AVR enhanced RISC architecture. It is suited to compact embedded-control systems that require deterministic timing, flexible event handling, and low-power operation without a separate external memory interface. Key features include 8 KB of self-programmable Flash plus a 2 KB boot-code section, 1 KB of SRAM, 512 bytes of EEPROM, read-while-write capability, and operation up to 32 MHz. The 32-QFN package supports compact surface-mount layouts while providing the pin count associated with the XMEGA E5 family's peripheral-rich 32-pin devices. The family is also supported by the manufacturer product page and family data sheet. Technically, the device combines a high-performance 8/16-bit AVR processor with dedicated event-system and interrupt resources. The event system allows peripherals to trigger actions without relying on software polling, which can reduce CPU latency in timing-sensitive designs. Its boot section supports in-system self-programming, while the EEPROM provides nonvolatile parameter storage separate from program Flash. Typical uses include compact industrial controllers, low-power sensor nodes, embedded timing modules, communication peripherals, and consumer-control products. Designers should select external decoupling, clock, and programming support according to the manufacturer data sheet, and verify every board-level signal against the package pinout before layout release. A key design consideration is the limited 8 KB Flash and 1 KB SRAM budget. Firmware and buffers should be sized conservatively, while avoiding blocking delays in event-driven control loops. The device is also available in a TQFP form, so package suffix and land pattern must not be interchanged. This page consolidates verified manufacturer and distributor information, purchase-oriented pricing, and application-specific engineering guidance so engineers can assess the ATXMEGA8E5-MUR before committing a PCB layout.

견적 요청 문의하기
AVR32DA28-I/SO - 8-bit AVR DA MCU, 32KB Flash, 28-SOIC | Microchip
AVR32DA28-I/SO

AVR32DA28-I/SO - 8-bit AVR DA MCU, 32KB Flash, 28-SOIC | Microchip

The Microchip Technology AVR32DA28-I/SO is an 8-bit AVR® DA family microcontroller with 32 KB of Flash, 4 KB of SRAM, and 512 bytes of EEPROM, running at up to 24 MHz across the full 1.8V to 5.5V supply range, housed in a 28-pin SOIC package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), working memory (SRAM), EEPROM, and a rich set of peripherals. The AVR® CPU belongs to a RISC architecture family known for deterministic instruction timing, single-cycle register access, and a mature toolchain (MPLAB X, Atmel Studio, and the Arduino-compatible DxCore core). In the broader taxonomy: AVR® DA -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The 1.8V to 5.5V supply range means the device can run directly from a single Li-ion cell or a regulated 3.3V / 5V rail, simplifying power-tree design. Key features include the hardware multiplier for fast arithmetic, an Event System for inter-peripheral signalling without CPU intervention, intelligent analog peripherals (12-bit ADC, three comparators, three zero-cross detectors, a DAC), capacitive touch (PTC) hardware, six U(S)ARTs, two SPI, and TWI (I²C-compatible). The 28-SOIC (I/SO) variant offers the largest pin count of the SO-package options and provides ample GPIO for keypad, segment-display, and mixed-signal front-ends. Internally, the AVR® DA uses a pipelined Harvard bus: separate Flash and SRAM buses let the CPU fetch instructions and read/write data in the same cycle. The 24 MHz clock, hardware multiplier, and zero-wait-state Flash fetch yield roughly 1 MIPS per MHz, so the part delivers up to ~24 MIPS. The integrated Core Independent Peripherals - Event System, CCL (Configurable Custom Logic), and peripheral touch controller - let complex timing and control tasks run with zero CPU load. Typical applications include capacitive touch human-machine interfaces (HMI), white-goods and small-appliance motor control, LED lighting controllers, sensor hubs with on-chip ADC, and battery-powered IoT nodes. The AVR® DA family is a popular modern replacement for legacy ATmega328P designs that need more Flash, real-time control, and touch capability without migrating to ARM. When designing with the AVR32DA28-I/SO, ensure the ICSP/PDI programming header follows the 6-pin AVR ISP convention with the MCLR pull-up sized for your VDD rail (typically 10 kΩ). Decouple VDD with a 100 nF X7R ceramic placed within 3 mm of each VDD pin, and add a 4.7 µF bulk capacitor near the AVCC pin to keep the ADC reference stable. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.

견적 요청 문의하기
B4420NSE7QQMD - QorIQ Qonverge B4420 SoC, 2x1.6GHz e6500 + 2x1.2GHz SC3900 | NXP Semiconductors
B4420NSE7QQMD

B4420NSE7QQMD - QorIQ Qonverge B4420 SoC, 2x1.6GHz e6500 + 2x1.2GHz SC3900 | NXP Semiconductors

NXP Semiconductors B4420NSE7QQMD is a QorIQ Qonverge B4420 heterogeneous multicore system-on-chip (SoC) for high-performance wireless infrastructure, integrating 2x e6500 PowerPC cores at 1.6 GHz and 2x StarCore SC3900 DSP cores at 1.2 GHz alongside the MAPLE-B3 baseband accelerator. The device is packaged in a 1020-ball FCPBGA (33x33 mm) and is the encrypted, 0-105C temperature-grade variant. The SoC is built on a 64-bit PowerPC e6500 architecture and is targeted at LTE-Advanced (LTE-A) and small-cell base-station designs where heterogeneous compute density matters. A heterogeneous SoC combines CPU, DSP, and hardware accelerator blocks on a single die, allowing baseband processing, L2/L3 protocol stack execution, and acceleration offload to run concurrently without crossing chip boundaries. The B4420 belongs to the QorIQ Qonverge family, itself a sub-family of the QorIQ communications processors, which in turn sits within the broader Power Architecture embedded microprocessor category. This hierarchy - B4420 -> QorIQ Qonverge -> QorIQ -> PowerPC -> communications processor -> microprocessor - reflects how NXP positioned the device for carrier-grade wireless. Key differentiating features include pin- and code-compatibility with the B4860 macrocell SoC, allowing OEMs to reuse a single hardware design and scale software between macrocell and metrocell deployments. The integrated MAPLE-B3 hardware accelerator performs forward-error-correction and turbo decoding at data rates required for 3G/4G modems. Hardware-accelerated security (encrypted variant) protects boot images and runtime code, while 0 to 105C operation suits outdoor base-station enclosures. The B4420 also supports legacy 2G/3G radio access networks, enabling migration paths from existing BTS platforms. Architecture-wise, the SoC combines dual-threaded PowerPC e6500 cores with their out-of-order execution pipeline, dual StarCore SC3900 VLIW DSP cores optimized for vector DSP workloads, and the MAPLE-B3 coprocessor block. A coherent fabric ties all cores to the shared L2/L3 memory subsystem and the high-speed SerDes interfaces. This contrasts with pure-DSP or pure-CPU SoCs that require external glue logic to balance compute loads. Typical applications include LTE small-cell (picocell / microcell / metrocell) base stations, 3G/HSPA+ Node B platforms, multi-standard radio access network (RAN) nodes, and other wireless infrastructure that combines CPU control plane, DSP modem firmware, and forward-error-correction hardware offload. The pin/code compatibility with B4860 also makes B4420 attractive for OEM designs that must scale capacity. A primary design consideration is the high 1020-ball FCPBGA package and 33x33 mm footprint, which demands a multilayer PCB (typically 10+ layers) with controlled-impedance SerDes routing, careful power-rail decoupling, and an experienced assembly flow. Engineers should validate thermal headroom at 105C ambient using the manufacturer's reference design and follow the B4420 Hardware Specifications document for signal-integrity guidelines. This page consolidates distributor stock and authorized-channel pricing, the available same-family and cross-family drop-in alternatives, and practical design considerations not reproduced in the manufacturer datasheet.

견적 요청 문의하기
BA45F0082 - Fire Protection Flash MCU | Holtek Semiconductor
BA45F0082

BA45F0082 - Fire Protection Flash MCU | Holtek Semiconductor

The Holtek BA45F0082 is a Flash memory type 8-bit high performance RISC architecture microcontroller designed especially for networking fire product peripheral applications, housed in a 16-pin SOP (150-mil, NSOP) package with Flash multi-programming support and an integrated analog front end for alarm sensing. A fire protection Flash MCU is a specialized class of 8-bit microcontroller (MCU) that combines a CPU core, program memory, RAM, peripheral circuits, and analog sensing blocks into a single semiconductor device optimized for smoke detector and fire alarm system nodes. Within the power management and sensing hierarchy of a fire alarm network, these devices sit between the physical smoke/optical sensing elements and the network communication transceiver, executing measurement, filtering, threshold comparison, and alarm signaling tasks. Key features of the BA45F0082 include Flash program memory with multi-programming convenience for field updates and development iteration, a wide range of flexible peripheral functions suited to low-power battery-operated detector nodes, and an application-oriented architecture that reduces external component count in networking fire product peripherals. The device family also includes the BA45FH0082 variant and the BA45V0082 OCDS evaluation chip for in-circuit debugging. Technical architecture is based on Holtek's 8-bit high performance RISC core, which provides fast, compact instruction execution typical of Holtek's BA45 series. Analog-to-digital conversion and digital control functions are integrated on-chip, allowing the detector signal chain to be implemented largely within the MCU. The 111-page manufacturer datasheet (revision V1.10, November 19, 2019) documents the complete register set, electrical characteristics, and package information. Typical applications include networking fire alarm peripheral modules, smoke detector sensor nodes, and fire protection control interfaces where Flash reprogrammability and integrated analog sensing reduce board cost and development time. Distribution data confirms the BA45F0082-16NSOP (SOP-16, 150-mil) package is the standard ordering option. A key design consideration is lifecycle: Holtek has issued formal End Of Life (EOL) notification for the BA45F0082/BA45FH0082, with a latest purchase date of December 25, 2025. New designs should target Holtek's replacement device referenced in the EOL notice, while existing designs should secure last-time-buy inventory or qualify the replacement. This page synthesizes EOL phase-out schedule information, cross-reference guidance, distributor pricing, and family variant data not consolidated in the manufacturer datasheet alone.

견적 요청 문의하기
BA45F6830 - CO/Gas Detector Flash MCU with Horn Driver | Holtek
BA45F6830

BA45F6830 - CO/Gas Detector Flash MCU with Horn Driver | Holtek

The Holtek Semiconductor BA45F6830 is an 8-bit A/D type Flash microcontroller purpose-built for CO and gas detector applications, integrating a 12V piezoelectric horn driver with on-chip boost converter, an LDO regulator, a buzzer driver, and a high-current LED driver. Its architecture targets the complete signal chain of a residential or industrial gas alarm in a single IC. A CO/gas detector MCU is a specialized class of 8-bit flash microcontroller that combines sensing interfaces, alarm actuation drivers, and power management on one die. In the power-management hierarchy, this device spans voltage regulation (LDO), voltage boosting (boost converter for the piezo horn), and actuator drive (buzzer, LED, horn), reducing the bill of materials for safety-critical alarm products. Key features include the integrated 12V piezoelectric horn driver fed by an on-chip boost converter, which allows alarm sounders to be driven directly from battery or low-voltage rails; a buzzer driver for secondary alert tones; a high-current LED driver for visual status indication; and programmable IOH output current. The Flash program memory supports multiple reprogramming cycles for field updates and manufacturing flexibility. The device is an A/D-type 8-bit high-performance RISC flash MCU. Its analog front-end supports sensor signal acquisition for electrochemical CO cells and catalytic or semiconductor gas sensors, while the RISC core executes alarm-logic, self-test, and calibration routines. Holtek provides an EV chip (BA45V6830) with On-Chip Debug Support (OCDS) so the real MCU device can be debugged during development, and the EV chip and real device are almost functionally identical, easing the transition from emulation to production silicon. Typical applications are standalone CO detectors, combined smoke/CO alarms, combustible gas detectors for kitchens and boilers, and portable gas warning devices where the horn driver, LED driver, and low-power MCU operation must coexist in one battery-powered product. A key design consideration is the boost converter to 12V for the piezo horn: verify horn drive current and boost inductor selection against the datasheet, and budget battery capacity for periodic self-test alarm bursts. This page synthesizes verified distributor and manufacturer data, lifecycle/EOL notices, and practical design guidance not found in a single datasheet, including drop-in replacement guidance as the device approaches its announced phase-out.

견적 요청 문의하기
BA45F6846 - 8-bit LCD MCU with Piezo Horn Driver | Holtek
BA45F6846

BA45F6846 - 8-bit LCD MCU with Piezo Horn Driver | Holtek

The Holtek BA45F6846 is a Flash Memory A/D type 8-bit high performance RISC architecture microcontroller with a fully integrated LCD driver and an integrated piezoelectric horn driver with boost converter, designed for CO/Gas detector applications requiring an LCD/LED display function. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of embedded systems within the broader hierarchy of semiconductor devices (MCU -> embedded processor -> integrated circuit -> semiconductor). The BA45F6846 belongs to Holtek's Battery A/D type 8-bit MCU family, which targets battery-powered sensing products. Key features include Flash program memory for field updates, an integrated multi-channel 12-bit ADC for sensor signal acquisition, a built-in LCD driver capable of driving display segments directly, and a unique piezoelectric horn driver with boost converter that generates the high drive voltage needed for loud alarm sounders directly from a low battery voltage. This integration eliminates external driver and boost circuitry, reducing BOM count and PCB area in alarm products. Architecturally, the device uses Holtek's proven 8-bit RISC core with efficient instruction set, low idle and sleep currents for long battery life, multiple timer modules, and comprehensive low-voltage and watchdog protection functions. The combination of analog front-end, display drive, and audio alarm drive on a single die is what distinguishes this family from generic 8-bit MCUs. Typical applications include carbon monoxide (CO) alarms, combustible gas detectors, smoke/heat alarm combinations, and other battery-powered safety products where an LCD display and a loud piezoelectric sounder are mandatory requirements under safety standards regimes. When designing with the BA45F6846, pay careful attention to sensor front-end grounding and the boost converter layout, as the horn driver switching currents can couple noise into sensitive ADC measurements if ground returns are shared. This page synthesizes datasheet information, application context, and practical design notes not found together on distributor listing pages, with verified sources cited.

견적 요청 문의하기
BA45FH0082 - 8-bit Fire Protection Flash MCU | Holtek
BA45FH0082

BA45FH0082 - 8-bit Fire Protection Flash MCU | Holtek

The Holtek BA45FH0082 is an 8-bit high-performance RISC Flash microcontroller purpose-built for networking-type fire protection peripheral products, operating from 2.2V to 5.5V with 2KB of embedded Flash program memory, 12-bit resolution A/D capability and a 20-pin SSOP-150mil package. An 8-bit Flash MCU is a complete self-contained computing system that integrates a processor core, program memory, data memory, and peripheral functions such as timers, ADCs and serial communication interfaces on a single chip. Within the embedded systems hierarchy, the BA45FH0082 sits in the application-specific MCU segment, positioned between general-purpose 8-bit MCUs and dedicated ASIC fire-detection ICs, offering the flexibility of Flash reprogramming with detection-optimized peripherals. Key features of the BA45FH0082 include a wide 2.2V~5.5V operating voltage range that supports both battery-powered smoke alarm nodes and 5V industrial panels, 2KB of Flash program memory for application firmware with in-circuit reprogrammability, 128B of RAM for working data, and a 12-bit A/D converter suitable for sensor signal acquisition. According to Holtek documentation, the device architecture is a high-performance RISC core designed specifically for fire protection peripherals with networking capability. Technically, the RISC architecture delivers efficient one-cycle instruction execution for most instructions, while the integrated Flash memory removes the lead-time and inventory constraints of mask ROM devices. The device is RoHS compliant, supporting lead-free assembly processes. Typical applications include networked smoke and heat alarm systems, fire protection peripheral control nodes, sensor polling units in addressable fire alarm loops, and battery-operated detection devices where the wide voltage range extends operating life. Design consideration: because the device is in End-of-Life, designs should evaluate Holtek's officially recommended replacement device referenced in the EOL notification before new layouts are committed. This page synthesizes distributor pricing, EOL lifecycle data, and drop-in alternative analysis not found in the manufacturer datasheet.

견적 요청 문의하기
BCM2711ZPKFSB06B0TT - Quad Cortex-A72 1.5GHz SoC | Broadcom
BCM2711ZPKFSB06B0TT

BCM2711ZPKFSB06B0TT - Quad Cortex-A72 1.5GHz SoC | Broadcom

The Broadcom BCM2711ZPKFSB06B0TT is a quad-core ARM Cortex-A72 (ARMv8-A, 64-bit) application processor clocked at 1.5 GHz, integrating the VideoCore VI graphics engine with 4Kp60 HEVC decode support, and packaged in a fine-pitch flip-chip BGA (FCBGA) package. It is the system-on-chip at the heart of the Raspberry Pi 4 family. An application processor (AP) is the highest-level device in the embedded computing hierarchy: system-on-chip (SoC) -> application processor -> microprocessor -> computing platform. Unlike a microcontroller, an SoC such as the BCM2711 integrates CPU cores, a graphics pipeline, a memory controller (for LPDDR4 SDRAM), and a full peripheral fabric, and is designed to boot a full operating system such as Linux. Key features include four 64-bit Cortex-A72 cores with out-of-order execution, hardware H.265/HEVC 4Kp60 decode and H.264 1080p60 encode/decode, a PCIe Gen 2 interface, dual MIPI DSI display and dual MIPI CSI-2 camera channels, USB 3.0 and USB 2.0 host support via external controllers, and a Gigabit Ethernet MAC. A rich GPIO bank and legacy BCM2835-compatible peripheral registers ease porting from earlier Raspberry Pi generations. Architecturally, the BCM2711 evolved from the earlier BCM2835/2836/2837 family: the Cortex-A72 cores replace the Cortex-A53 of the BCM2837, delivering roughly 2-3x higher CPU throughput, while the VideoCore VI raises graphics performance substantially over the VideoCore IV. The public BCM2711 ARM Peripherals datasheet (RP-008248, Raspberry Pi Trading Ltd, Version 1, 5 February 2020) documents the peripheral map for OS porting. Typical applications include single-board computers, industrial HMI and edge-AI gateways, digital signage and 4K media players, and embedded vision systems leveraging the dual CSI-2 camera interfaces. Design consideration: the FCBGA package requires controlled-impedance PCB stack-up for LPDDR4, PCIe and USB 3.0 routing, and the SoC needs an external PMIC and boot EEPROM - it is not a stand-alone module. This page adds distributor sourcing data, drop-in alternatives, and design notes not found in the manufacturer datasheet.

견적 요청 문의하기