마이크로컨트롤러

제품 (18747)

C8051F206 - 25MHz 8KB Flash Mixed-Signal MCU | Silicon Labs
C8051F206

C8051F206 - 25MHz 8KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F206 is an 8-bit C8051 mixed-signal microcontroller operating at 25 MHz, with 8 KB of program Flash, 1.25 KB of RAM, a 12-bit ADC, 32 I/O pins, and a 48-pin TQFP package measuring 7 mm by 7 mm. It combines an 8051-compatible processing core with mixed-signal acquisition resources and multiple communication interfaces for compact embedded-control designs. A microcontroller is a programmable integrated circuit that executes embedded software, reads inputs, controls outputs, and manages system timing. The C8051F206 belongs to the C8051F2xx family of 8-bit MCUs and occupies the MCU hierarchy above the processor core while integrating Flash memory, RAM, analog-to-digital conversion, timers, and serial communications on one package. The supplied data identifies 25 MIPS performance, 8 kB Flash, 1.25 kB RAM, a 12-bit ADC, 32 I/O pins, three 16-bit timers, and a 2.7 V to 3.6 V supply range. Its 48-TQFP package provides more external connections than smaller 32-pin devices, supporting projects that need parallel digital I/O alongside analog measurement and serial communications. The package is surface-mount technology, but dimensions, pin assignments, and thermal details beyond the supplied 7 mm by 7 mm indication remain to be confirmed from the manufacturer documentation. Technically, the part combines an 8051 core with mixed-signal peripherals. The 12-bit ADC suits sensor acquisition, while the three 16-bit timers support timing, pulse measurement, and periodic control tasks. The 8 KB Flash limits firmware complexity, so code size, boot code, library size, and update requirements should be checked early. The 25 MHz maximum clock supports faster control-loop and communication handling than lower-speed members of the same family, provided the firmware and peripherals remain within documented timing limits. Typical uses include industrial sensor controllers, compact data-acquisition modules, embedded instrumentation, communications equipment, and general mixed-signal control boards. A design can place analog sensing and digital control in one device, reducing the need for a separate ADC or controller when the 32 available I/O pins and specified RAM are sufficient. Design planning should begin with the manufacturer's datasheet rather than distributor summaries. Confirm the exact 48-pin assignments, exposed versus non-exposed thermal arrangements, oscillator requirements, reset behavior, ADC reference limits, and peripheral multiplexing. Because Flash and RAM are modest for many contemporary workloads, prototype firmware should be compiled early and measured for code and data-memory margins. This page combines verified distributor specifications, source links, application guidance, and replacement-screening criteria. It also distinguishes confirmed values from missing parameters, avoiding unsupported electrical claims while highlighting where a PCB or firmware revision may be required before substitution.

견적 요청 문의하기
C8051F220 - 25MHz 8KB Flash 8051 MCU | Silicon Labs
C8051F220

C8051F220 - 25MHz 8KB Flash 8051 MCU | Silicon Labs

The Silicon Labs C8051F220 is an 8-bit C8051F2xx mixed-signal microcontroller with a 25 MHz maximum clock, 8 KB of ISP flash memory, and a 48-pin TQFP package. It combines an 8-bit 8051-compatible core with an integrated 8-bit ADC, programmable analog gain, multiple timers, UART, and mixed-signal peripherals for embedded control and measurement designs. A microcontroller is a programmable integrated circuit that executes firmware, reads inputs, controls outputs, and manages embedded-system timing. The C8051F2xx family belongs to the broader 8-bit MCU hierarchy and is intended for applications requiring mixed-signal measurement, serial communication, and compact control functions without a larger external processor. Verified device features include 8 KB flash organized as 8K x 8, 32 external ADC inputs, programmable ADC throughput up to 100 ksps, and programmable amplifier gains of 0.5, 1, 2, 4, 8, and 16. The ADC has a reported ±1/2 LSB integral nonlinearity figure and no missing codes in the supplied product description. The C8051F220 is identified as an 8051 C8051F2xx MCU with an 8-bit data bus and a maximum clock of 25 MHz in the distributor records. Its 48-TQFP package provides a surface-mount implementation with 7 x 7 mm dimensions as listed by DigiKey. The supplied sources do not provide a verified manufacturer ordering-code suffix or complete pin-level electrical table. Typical applications include industrial sensor acquisition, temperature and process measurement, digital control panels, low-speed serial equipment, embedded instrumentation, and compact mixed-signal control systems. The ADC and programmable gain make the device useful for analog front ends where multiple inputs must be scanned rapidly. When designing around the C8051F220, confirm the exact package variant, oscillator requirements, supply voltage, programming interface, and ADC reference arrangement against the selected ordering code and manufacturer documentation. Do not infer missing specifications from similarly named C8051F2xx devices.

견적 요청 문의하기
C8051F221 - 8-Bit 25MHz Mixed-Signal MCU | Silicon Labs
C8051F221

C8051F221 - 8-Bit 25MHz Mixed-Signal MCU | Silicon Labs

Silicon Labs C8051F221 is an 8-bit C8051F2xx mixed-signal microcontroller operating up to 25 MHz, with 8 KB of Flash memory, 256 bytes of RAM, and analog conversion and comparator resources integrated in a 32-LQFP 7 x 7 mm package. Its 2.7 V to 3.6 V supply range makes it suitable for low-voltage embedded control systems that require more capability than a basic 8-bit controller. A microcontroller is a programmable semiconductor that integrates a CPU, memory, digital I/O, and peripherals on one chip. The 8051 instruction set and embedded-control architecture place this device within the microcontroller hierarchy: C8051F2xx family -> 8051-compatible MCU -> mixed-signal microcontroller -> embedded processor -> semiconductor. Mixed-signal MCUs combine digital control with analog measurement or comparison functions, reducing the number of discrete components required in instrumentation and control products. The C8051F221 provides an 8-bit ADC with a 22-channel input multiplexer. Port I/O can be assigned as ADC inputs during operation, while the analog section supports throughput up to 100 ksps. The integrated analog peripherals make the MCU useful for sensor acquisition, threshold detection, process monitoring, and compact industrial control panels. The supplied search data identifies 25 MIPS performance, 8 kB of ISP Flash, and an 8-bit ADC, while another result lists 256 x 8 RAM organization. Communication and programming are supported through the C8051F2xx mixed-signal platform and ISP-oriented Flash. ISP capability lets a production or field-update workflow program Flash without a separate programming socket, provided the board exposes the required programming interface and supports the associated operating procedure. Designers should consult the manufacturer datasheet for exact ISP pin requirements, clock limits, and reset behavior before laying out a programming connector. The 32-LQFP package exposes digital I/O and analog inputs while supporting compact surface-mount assembly. Its 7 x 7 mm body is larger than the smallest leadless packages but easier to inspect and solder than a very fine-pitch BGA. Adequate soldermask-defined land patterns, thermal vias where appropriate, and clean supply decoupling are necessary for reliable production assembly. Typical applications include industrial process measurement, environmental sensor interfaces, digital potentiometer and threshold-control systems, panel controls, and compact embedded instruments. When selecting the MCU, verify that the required I/O count, ADC input assignment, programming method, memory footprint, and 2.7 V to 3.6 V power supply match the complete board architecture. This page consolidates verified distributor specifications, package information, analog-feature details, application guidance, and drop-in comparison data. It also distinguishes confirmed values from specifications that require confirmation in the manufacturer datasheet, helping engineers make faster sourcing and design decisions without relying on generic microcontroller assumptions.

견적 요청 문의하기
C8051F226 - 25MHz 8KB Mixed-Signal MCU | Silicon Labs
C8051F226

C8051F226 - 25MHz 8KB Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F226 is an 8-bit mixed-signal microcontroller operating at 25MHz, with 8KB of flash program memory, 1.25KB of RAM, a 32-channel 8-bit ADC, and a 48-pin TQFP package measuring 7x7mm. Its 8051 core executes up to 25 MIPS, while integrated analog and timing peripherals support embedded measurement, control, and communication designs. A mixed-signal MCU is a microcontroller that combines a digital processor core with analog and timing functions on one integrated circuit. In the broader semiconductor hierarchy, this C8051 device belongs to the microcontroller class and provides sensing, control, communications, and programmable I/O in a single package. It is positioned between simple 8-bit control devices and higher-performance 32-bit embedded processors. Verified device features include 8KB of ISP flash, 1.25KB of RAM, 32 I/O lines, an 8-bit ADC with 32 channels and configurable throughput up to 100ksps, two comparators, three 16-bit timers, and a 25MHz maximum clock. The ADC is reported as a 32-channel mixed-signal peripheral, with port I/O configurable as analog inputs. Exact voltage, temperature, package marking, and interface details must be confirmed in the manufacturer datasheet before design release. The C8051F226 is useful when a compact 8-bit controller needs both digital control and on-chip analog measurement. Its 8051 instruction set and peripheral set suit embedded control, industrial sensing, instrumentation, and communication-oriented embedded products. The 48-TQFP package provides a conventional pin-count-compatible platform for external memory, bus, and peripheral connections where the specific pin functions are confirmed from the datasheet. A replacement should not be selected from the MPN name alone. Verify the exact package, pinout, memory map, oscillator requirements, ADC characteristics, peripheral assignments, and software compatibility. The provided cross-reference search identifies C8051F005-GQ as a comparison item, but the available evidence does not establish that it is pin-to-pin compatible or a drop-in replacement for C8051F226.

견적 요청 문의하기
C8051F230 - 25MHz 8-Bit Flash MCU | Silicon Labs
C8051F230

C8051F230 - 25MHz 8-Bit Flash MCU | Silicon Labs

The Silicon Labs C8051F230 is an 8-bit C8051F2xx mixed-signal microcontroller operating at 25 MHz with 8 KB of Flash memory and housed in a 48-pin TQFP (7x7 mm) package. According to the verified distributor data, the device provides an 8-bit architecture, 25 MHz performance, and 8 KB of programmable Flash. The C8051F230 family is positioned for embedded control applications requiring an 8051-compatible core, mixed-signal peripherals, and in-system programming support. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one package. The C8051F230 belongs to the C8051F2xx family and is an 8-bit MCU, meaning its internal data path and instruction set operate on 8-bit values. Its 25 MHz clock provides the timing basis for executing firmware and controlling external hardware, while the 8 KB Flash memory stores program code. This device is distinct from a general-purpose microprocessor because it also incorporates embedded-system peripherals and digital I/O. The verified C8051F230 information identifies the part as a highly integrated mixed-signal 8-bit MCU. The family also includes communication and timing resources referenced in the cross-reference data, including SPI, UART, and three 16-bit timers. The 48-TQFP package exposes the device's I/O and mixed-signal connections through a relatively high pin count, making it suitable for prototypes and embedded industrial or control designs that need more external connectivity than a small-package MCU. C8051F230 is primarily suited to embedded control, data acquisition, communication, and low-to-medium-speed automation. Its 8-bit architecture can handle digital control, sensor conditioning, actuator control, and communication tasks when firmware requirements do not demand a high-performance 32-bit processor. The mixed-signal positioning is useful when a design must combine digital control with analog or sensor-related functions, although exact ADC, DAC, timer, and electrical details must be confirmed in the manufacturer documentation before final design release. Designers should preserve the 48-TQFP footprint, verify pin multiplexing, and confirm the device-specific oscillator, reset, programming, and peripheral requirements against the manufacturer datasheet. Software compatibility must also be checked because a family-compatible MCU can differ in memory size, peripheral availability, and package pin assignment. The provided verified data supports the 25 MHz core speed, 8-bit architecture, 8 KB Flash memory, and 48-pin TQFP package, but does not provide a complete electrical timing or pin-function table. This product page combines verified distributor specifications, package information, lifecycle caveat handling, comparison fields, and engineering-oriented design guidance. It is intended to support initial component selection and sourcing review, while final procurement and firmware deployment should use the latest manufacturer datasheet and authorized distributor inventory data as of 2026-10-23.

견적 요청 문의하기
C8051F231 - 25MHz 8KB Flash 32-LQFP MCU | Silicon Labs
C8051F231

C8051F231 - 25MHz 8KB Flash 32-LQFP MCU | Silicon Labs

The Silicon Labs C8051F231 is a 25 MHz, 8-bit mixed-signal microcontroller with 8 KB of ISP Flash, 256 bytes of RAM, 22 I/O pins, and a 32-LQFP 7 mm × 7 mm package. It operates from a 2.7 V to 3.6 V supply. According to the available datasheet summaries, the device combines an 8051-compatible core with mixed-signal peripherals and on-chip debug support. A microcontroller is a programmable integrated circuit that integrates a CPU core, memory, I/O ports, timers, serial interfaces, and analog or mixed-signal peripherals on one package. Within the semiconductor hierarchy, the C8051F231 belongs to the 8-bit microcontroller and embedded-processing categories. Its 8 KB Flash stores firmware, while its 256-byte RAM supports working variables, stack operations, and short-lived control data. The C8051F231 provides 22 I/O pins, a 25 MHz clock, two comparators with programmable hysteresis, configurable comparator interrupts or reset behavior, a VDD monitor, and a brown-out detector. Its on-chip JTAG debug circuit supports full-speed, non-intrusive in-system debugging without an external emulator, which can shorten firmware bring-up and board validation. These features make it useful where compact mixed-signal control is required. The C8051F231 is positioned for embedded control, sensor acquisition, industrial monitoring, and low-cost peripheral control. Its 2.7 V to 3.6 V operating range suits systems using regulated 3.3 V rails, while the 32-LQFP package provides a conventional surface-mount footprint for PCB assembly. Compared with larger microcontrollers, its 8 KB Flash and 256-byte RAM constrain application size, so firmware budgeting and peripheral sharing are important. For analog signal conditioning, the integrated comparators can monitor thresholds and cooperate with the VDD monitor and brown-out detector. The brown-out detector helps supervise the supply, while the VDD monitor supports power-related detection. Exact threshold, timing, and electrical limits should be confirmed from the manufacturer datasheet before production release. The principal design consideration is resource planning. Allocate Flash and RAM before adding libraries, and avoid assuming that a general-purpose 8051 replacement will preserve firmware timing, startup behavior, or peripheral compatibility. Validate the pin multiplexing, interrupt vectors, clock configuration, debug interface, and mixed-signal routing on the assembled PCB. This product data synthesizes verified distributor listings, package information, memory and clock specifications, and practical design guidance. It is intended as an engineering starting point, not as a substitute for the complete Silicon Labs datasheet, errata, or application-specific validation.

견적 요청 문의하기
C8051F236 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
C8051F236

C8051F236 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F236 is a mixed-signal 8-bit microcontroller with a 25 MIPS C8051 core, 8 kB of Flash memory, 1.25 kB of RAM, three 16-bit timers, and integrated analog peripherals in a 48-pin QFP package. Its combination of digital control and on-chip mixed-signal resources supports compact embedded measurement, control, and communications designs. A microcontroller is an integrated semiconductor containing a processor core, memory, and peripherals such as timers, serial interfaces, analog converters, comparators, and interrupt controls. In the system hierarchy, the C8051F236 belongs to the 8-bit microcontroller class, combines a digital processor with analog functions, and is used as the control and measurement hub of an embedded system. Key features include up to 25 MIPS performance, 8 kB of ISP Flash, 1.25 kB of RAM, three 16-bit timers, two comparators with programmable hysteresis, a VDD monitor with brown-out detection, and on-chip JTAG debug circuitry. The integrated analog and timing resources can reduce the need for external components while simplifying firmware-driven measurement and control. The C8051F236 uses an 8-bit C8051 architecture with an integrated mixed-signal feature set. Its three 16-bit timers support timing, event counting, and periodic control functions. The two comparators can generate interrupts or resets, while the VDD monitor helps supervise the supply. On-chip JTAG debug supports full-speed, non-intrusive in-system debugging without a separate emulator. Typical applications include industrial sensor conditioning, data acquisition modules, small motor and actuator controllers, embedded instrumentation, and low-cost control systems where analog monitoring and precise timing are required. The 48-pin QFP package provides a conventional surface-mount format, although the QFP footprint is generally larger than modern compact packages. When designing a board, preserve the required power, clock, reset, programming, and ground connections according to the manufacturer datasheet. Provide local decoupling near the supply pins and route programming and debug signals away from noisy analog inputs. Verify the exact pin names, voltage limits, and peripheral multiplexing before final PCB release because those details are not included in the supplied web excerpts. This page consolidates verified C8051F236 specifications, distributor references, package information, and design guidance into a compact engineering reference. It also distinguishes verified facts from missing datasheet parameters and avoids presenting unverified alternatives as drop-in replacements.

견적 요청 문의하기
C8051F330-GM - 25MHz Mixed-Signal MCU | Silicon Labs
C8051F330-GM

C8051F330-GM - 25MHz Mixed-Signal MCU | Silicon Labs

Silicon Labs C8051F330-GM is a mixed-signal 8-bit microcontroller with a 25 MHz 8051-compatible core, 8 kB Flash memory, 0.75 kB RAM, and communication peripherals including I2C, SPI, and UART. It is packaged in a 20-pin QFN, identified by DigiKey as 20-MLP (4x4). The device is designed for compact embedded control systems that require integrated mixed-signal processing, serial connectivity, and multiple timer resources in a small surface-mount footprint. A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripherals, and input/output functions on one integrated circuit. In the broader electronics hierarchy, the C8051F330-GM belongs to the 8-bit MCU category, integrates digital control with analog and communication functions, and is used as the central controller in embedded products. Its mixed-signal architecture allows software to coordinate sensing, timing, serial data transfer, and external control functions without requiring several separate discrete components. Key features include 25 MHz performance, 8 kB of Flash, 0.75 kB of RAM, four 16-bit timers, I2C, SPI, UART, and 21 I/O ports as reported in the verified distributor data. The MCU is designed for applications that need more peripheral integration than a basic general-purpose logic controller while retaining the simplicity of an 8-bit architecture. Its compact 4 mm by 4 mm package supports space-constrained boards and high-density embedded equipment. The manufacturer describes the device as a highly integrated mixed-signal 8-bit MCU and identifies its core as a pipelined 8051-compatible architecture capable of up to 25 MIPS in the family documentation. The available verified information specifies a 2.7 V to 3.6 V supply range for this device in one distributor result, while detailed timing, ADC, comparator, oscillator, and electrical characteristics remain dependent on the manufacturer datasheet and must be confirmed before design release. Typical applications include compact sensor controllers, industrial monitoring equipment, consumer accessories, communication modules, and low-power embedded control boards. I2C and SPI support can simplify connection to sensors, displays, memory, and digital peripherals, while the four 16-bit timers are useful for periodic sampling, timing, motor-control sequencing, or pulse-width-related tasks. The small package makes the device suitable for designs where board area is limited. Designers should confirm the exact pin functions, exposed-pad connection, recommended decoupling, clock configuration, programming method, and mixed-signal layout requirements from the official C8051F33x datasheet. Because this is a mixed-signal MCU, analog and digital return paths, power distribution, and exposed-pad thermal treatment should be planned with the same care used for precision analog circuitry. This page consolidates the verified distributor and manufacturer specifications, explains the role of the C8051F330-GM in embedded mixed-signal systems, and separates confirmed values from parameters that require datasheet review before production design.

견적 요청 문의하기
C8051F340-GQ - 8-Bit 48 MHz USB MCU | Silicon Labs
C8051F340-GQ

C8051F340-GQ - 8-Bit 48 MHz USB MCU | Silicon Labs

The Silicon Labs C8051F340-GQ is an 8-bit C8051F34x mixed-signal microcontroller with a 48 MHz maximum clock, 64 KB of Flash program memory, 4.25 KB of RAM, and USB 2.0 connectivity, housed in a 48-pin TQFP package measuring 7 x 7 mm. Its integrated USB controller includes a transceiver and on-chip clock recovery, allowing USB applications without external resistors, crystal, voltage regulator, EEPROM, or other USB interface components. A microcontroller is a programmable integrated circuit containing a CPU core, memory, peripherals, and input/output interfaces. The C8051F34x belongs to the 8051 microcontroller family and combines digital control with mixed-signal measurement functions. Its 8-bit data bus supports embedded control, while the high-speed C8051F34x core executes firmware for protocol handling, data acquisition, and device control. Key features include a 10-bit, 20-channel ADC operating to 200 ksps, a voltage reference, two comparators, an internal temperature sensor, a watchdog timer, an internal oscillator, a power-on reset, a VDD monitor, and an integrated voltage regulator. The USB 2.0 function controller supports direct USB-connected products, while 5 V-tolerant port I/O and RST inputs support mixed-voltage external interfaces. The device combines an 8051-compatible control core with integrated analog peripherals, reducing external component count in USB instrumentation, data acquisition, human-interface, and embedded control systems. Its 64 KB Flash memory provides room for application firmware and USB code, while 4.25 KB RAM supports working data and stack operations. The integrated analog block enables sensor reading, threshold detection, and control functions without a separate ADC. Typical applications include USB-connected test equipment, measurement instruments, data-acquisition modules, industrial control products, and embedded USB peripherals. The 48 MHz clock specification is listed by DigiKey, while Mouser describes the part as a 50 MHz 8-bit MCU; engineers should verify the exact operating conditions and clock configuration in the manufacturer datasheet before design release. The principal design consideration is package and power planning. This exact orderable suffix uses the 48-pin TQFP footprint, and the manufacturer documents other C8051F34x devices in 32-pin LQFP or QFN packages. USB routing, analog-reference grounding, decoupling, and crystal or clock selection must be planned according to the manufacturer’s recommended layout and USB application requirements. This page combines the verified manufacturer feature summary, package information, distributor listings, and cross-reference evidence into a practical component-selection record. It also distinguishes verified drop-in evidence from family variants and highlights where a replacement requires pinout, firmware, memory, and peripheral verification before approval.

견적 요청 문의하기
C8051F506-IM - 50MHz 8051 32KB Flash Automotive MCU | Silicon Labs
C8051F506-IM

C8051F506-IM - 50MHz 8051 32KB Flash Automotive MCU | Silicon Labs

The Silicon Labs C8051F506-IM is an 8-bit 8051-core mixed-signal microcontroller running at 50 MHz, integrating 32 KB of in-system programmable Flash and 4.25 KB of RAM in a 32-pin QFN (5x5 mm) package. It is AEC-Q100 qualified for automotive and industrial use, supports an extended operating temperature range up to +125 °C, and operates from a 1.8 V to 5.25 V supply. According to the Silicon Labs product page, the device is positioned as a highly integrated automotive and industrial MCU with integrated communication interfaces including CAN and LIN. An 8051 microcontroller is a Harvard-architecture 8-bit CPU originally introduced by Intel in 1980 and now widely licensed and extended by Silicon Labs (formerly Cygnal), Nuvoton, and others. The C8051F50x family belongs to the broader Mixed-Signal ISP Flash MCU Family - a hypernym hierarchy that places it under 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Modern 8051 cores from Silicon Labs achieve up to 50 MIPS throughput and integrate analog peripherals such as ADC, DAC, comparators, voltage references, and communication controllers onto a single die, eliminating external analog components. Key features of the C8051F506-IM include 32 KB (32K x 8) Flash, 4.25 KB RAM (256 bytes standard + 4 KB AUX RAM), a 12-bit ADC with up to 25 channels, an on-chip temperature sensor, two analog comparators, integrated CAN 2.0B and LIN 2.1 controllers, and 25 digital I/O lines. The 50 MHz core delivers 50 MIPS instruction throughput, making it suitable for real-time control loops. On-chip oscillators (24 MHz internal) eliminate external crystals in many designs. Typical applications include automotive body controllers and sensor nodes, LIN/CAN-connected ECUs, industrial CANopen or DeviceNet slaves, brushless DC motor control, and low-power sensor hubs. The AEC-Q100 grade and 125 °C capability let designers deploy the same firmware into under-hood and cabin environments. The wide 1.8 V-5.25 V supply range also enables direct connection to Li-ion or 3.3 V digital rails without level shifters. When designing with the C8051F506-IM, place the bypass capacitors (one 0.1 µF plus one 4.7 µF bulk) within 5 mm of the VDD pin to minimize digital switching noise on the analog reference. For automotive applications, follow the Silicon Labs EMC guidelines for CAN bus termination (typically 120 Ω split termination) and route LIN bus traces away from switching nodes. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes that go beyond what is in the manufacturer datasheet, helping engineers shorten evaluation cycles and make informed replacement decisions.

견적 요청 문의하기
CC3220SF12ARGKR - SimpleLink Wi-Fi MCU, 1MB Flash, 256kB RAM | Texas Instruments
CC3220SF12ARGKR

CC3220SF12ARGKR - SimpleLink Wi-Fi MCU, 1MB Flash, 256kB RAM | Texas Instruments

The Texas Instruments CC3220SF12ARGKR is a SimpleLink 32-bit Arm Cortex-M4 Wi-Fi wireless microcontroller SoC with 1MB of internal Flash and 256kB of RAM, offered in a 64-pin VQFN (RGK) package with exposed thermal pad. It integrates an RF transceiver supporting IEEE 802.11 b/g/n at 2.4 GHz with 18 dBm transmit power output and -96 dBm receive sensitivity, alongside an applications Cortex-M4 MCU that runs user application code directly on-die. The part is the highest-memory variant of the three-member CC3220x family, distinguished by its dedicated 1MB user Flash. A SimpleLink Wi-Fi wireless MCU is a single-chip solution that combines an industry-standard microcontroller core with a Wi-Fi network processor, offloading the complex 802.11 MAC/PHY stack so the host MCU can focus on application logic. The CC3220x family sits within TI's broader SimpleLink MCU platform, which also includes low-energy Bluetooth, Sub-1 GHz, and host MCUs that share a common SDK and toolchain. The network processor subsystem includes its own ARM Cortex-M3 dedicated to Wi-Fi, hardware crypto engines, and a TCP/IP stack, allowing the application Cortex-M4 to wake only when needed for ultra-low-power IoT operation. Key features include integrated Wi-Fi security with hardware-accelerated WPA2 and WPA3, 27 GPIO pins, and a rich serial peripheral set including ADC, I2C, SPI, UART, and PCM interfaces. The wide supply range of 2.1V to 3.6V supports direct connection to a single Li-ion cell or 3.3V regulated rail. The CC3220SF12ARGKR is the SF (Secure Flash) variant with 1MB user Flash, building on the CC3220S's MCU-level file-system encryption, secure boot, and debug security, and the CC3220R's IoT networking security and device identity/keys. Architecturally, the CC3220SF separates the Wi-Fi network processor from the user application MCU, allowing independent firmware updates for each subsystem. The integrated hardware crypto block accelerates AES, SHA, and TLS handshake operations, offloading the application MCU. This makes it well-suited for cloud-connected IoT nodes where TLS handshake latency and power budget are critical. Typical applications include cloud-connected home automation gateways, industrial IoT sensor nodes reporting over MQTT, Wi-Fi-enabled medical telemetry devices, smart appliances with Over-The-Air update capability, and asset tracking beacons. The 1MB Flash supports richer application code than the CC3220S variant. When designing with this device, carefully follow TI's layout guidelines for the RF section, paying particular attention to the 50-ohm antenna trace impedance and ground plane stitching. The CC3220SF includes a 4-wire JTAG debug interface; ensure the debugger reset line is correctly pulled during flash programming to avoid bricking. This page synthesizes distributor pricing, drop-in CC3220x family alternatives, and practical design considerations not found in a quick scan of the manufacturer datasheet.

견적 요청 문의하기
CH32V203C8T6 - 144MHz RISC-V MCU, 64KB Flash, USB/CAN, LQFP-48 | WCH
CH32V203C8T6

CH32V203C8T6 - 144MHz RISC-V MCU, 64KB Flash, USB/CAN, LQFP-48 | WCH

The WCH (Nanjing Qinheng) CH32V203C8T6 is an industrial-grade, enhanced low-power 32-bit RISC-V microcontroller operating up to 144 MHz with 64 KB Flash and 20 KB SRAM, housed in a 48-pin LQFP package. The CH32V203C8T6 integrates dual USB (Host + Device) controllers, one CAN 2.0B interface, USB type-C PD support, and 12-bit ADC, making it well suited to industrial control, USB peripherals, and motor-control applications. What is an MCU? A microcontroller unit (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces (ADC, timers, communication buses). In the power-management hierarchy, an MCU sits above the power supply and below the application firmware; in taxonomy terms, it belongs to the class microcontrollers -> 32-bit MCUs -> RISC-V MCUs -> industrial-grade general-purpose MCUs. The RISC-V ISA is an open, royalty-free instruction-set architecture, in contrast to closed ISAs such as ARM Cortex-M, allowing WCH to deliver cost-optimized silicon. Key features include up to 64 KB on-chip program memory, 20 KB SRAM, an enhanced I/O port structure, a 12-bit ADC, and a low-power Run mode of approximately 49.3 uA/MHz. The CH32V203C8T6 supports both USB Host and USB Device roles simultaneously and adds a CAN 2.0B interface for industrial networking, with USB Type-C PD 3.0 negotiation support. Architecturally, the CH32V203C8T6 uses a 32-bit RISC-V core with separate instruction and data buses that can operate in parallel with DMA, reducing CPU load during high-throughput peripheral transactions. Multi-bus synchronous operation enables deterministic latency for time-critical USB and CAN traffic. Typical applications include industrial USB-to-CAN bridges, USB HID devices, USB type-C PD chargers, low-power sensor nodes, and consumer peripherals. The combination of dual-role USB and CAN is rare at this price point, simplifying BOMs for industrial gateways. When designing with the CH32V203C8T6, ensure the USB pins are routed with 90-ohm differential impedance and that the LQFP-48 thermal pad (if any) is soldered for power dissipation. Decouple each VDD pin with a 100-nF ceramic capacitor placed within 2 mm of the pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
COP8SAC720M8 - 8-Bit 10MHz OTP MCU 4KB | Texas Instruments
COP8SAC720M8

COP8SAC720M8 - 8-Bit 10MHz OTP MCU 4KB | Texas Instruments

The Texas Instruments COP8SAC720M8 is an 8-bit CMOS ROM-based and One-Time Programmable (OTP) microcontroller belonging to the COP8™ 8SA family, operating at up to 10 MHz with 4KB (4K x 8) of program memory and 128 bytes of RAM, packaged in a 20-pin SOIC Wide (7.50 mm). The MIC 555 timer companion ecosystem is unrelated. Key features include 16 digital I/O pins, an integrated power-on-reset (POR) circuit, and a low-pin-count 20-SOIC footprint aimed at very small package applications. Background: An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, peripherals, and I/O on one silicon die. The COP8 (Controller Oriented Processor 8-bit) is Texas Instruments' CISC 8-bit architecture featuring a register-based design optimized for embedded control. OTP microcontrollers ship with one-time-programmable memory, allowing low-volume custom firmware for cost-sensitive and secure applications where code flexibility is sacrificed for unit price. Key features include 4KB (4K x 8) OTP program memory, 128 x 8 RAM, 16 I/O lines, on-chip Power-On-Reset eliminating external reset circuitry, and an integrated oscillator. The 20-pin SOIC Wide (0.295 inch / 7.50 mm body) gives the part MIC 0603-style PCB handling ease for through-hole-style hand-soldering and inspection, while still being surface-mount. Technical depth: The COP8SA family uses a CISC Harvard-like architecture with separate program and data spaces, a multi-source interrupt controller, and on-chip peripherals including timers and a watchdog timer. The 10 MHz clock yields ~1 µs instruction cycle, suitable for slow control tasks, sensor signal conditioning, and human-interface key-driven panels. Operating voltage spans 2.7V to 5.5V. Typical applications include white goods and HVAC control modules, simple sensor signal conditioning, low-cost consumer keypads, and industrial pushbutton interface boards. The MIC 5150 family of hot-swap controllers is unrelated to this MCU. This part is suited where code size below 4KB suffices and BOM cost is critical. Design consideration: Because this part is OTP, firmware cannot be field-updated. For prototypes or low-volume runs, choose FLASH-based parts like ATMEGA48A-AU. Always verify the LTB voltage drop tolerance before substituting. The COP8SAC7D2 should not be confused with this MPN (M7D2 suffix differs). This page synthesizes distributor pricing, lifecycle status, package detail, and drop-in alternatives not found on the manufacturer datasheet alone, providing an integrated resource for engineers sourcing the COP8SAC720M8.

견적 요청 문의하기
COP8SAC720M8/NOPB - 8-bit 10MHz 4KB OTP MCU | Texas Instruments
COP8SAC720M8/NOPB

COP8SAC720M8/NOPB - 8-bit 10MHz 4KB OTP MCU | Texas Instruments

The Texas Instruments COP8SAC720M8/NOPB is an 8-bit CMOS microcontroller from the COP8 family (8SA sub-series) featuring 4KB of One-Time Programmable (OTP) program memory, 128 bytes of RAM, and 16 digital I/O lines, housed in a 20-pin SOIC (0.295" / 7.50mm width) package. It runs at 10MHz from a single 3.3V or 5V supply, integrates power-on reset (POR), and provides a very small form factor for space-constrained applications. The /NOPB suffix designates a lead-free, RoHS-compliant shipping version. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (ROM/Flash/OTP), data memory (RAM), and programmable I/O peripherals on one IC. OTP microcontrollers ship blank and are programmed once by the OEM or via a programming socket before deployment - ideal for low-cost, medium-volume production where mask-ROM NRE charges are not justified. The COP8 core uses a CISC instruction set optimized for byte-level bit manipulation, common in white-goods and appliance control. Key features of the COP8SAC720M8/NOPB include 4KB (4K x 8) OTP program memory, 128 x 8 RAM, an integrated power-on reset circuit that holds the CPU in reset until VDD stabilizes, 16 general-purpose I/O pins multiplexed with peripheral functions, a programmable watchdog timer, and an 8-bit timer/counter. The 10MHz clock supports instruction-cycle execution in the 200ns range, sufficient for slow loop-control and user-interface scanning tasks. Typical applications for the COP8SAC720M8/NOPB include white-goods controllers (washing machines, dishwashers, microwave ovens), HVAC thermostats, low-end remote controls, simple sensor read-out boards, and replacement of discrete 8-bit logic in legacy product lines. Its 20-SOIC footprint and wide operating voltage range make retrofit into existing COP8-based designs straightforward. When designing with this part, note that OTP programming requires a special programmer or gang programmer prior to solder; firmware cannot be updated in the field. The part is RoHS-compliant (lead-free /NOPB suffix) per the addressable manufacturing data. Programming model and peripheral registers follow the COP8 architecture reference - consult the manufacturer datasheet for the full register map, interrupt vector table, and timing diagrams before prototyping.

견적 요청 문의하기
COP8SAC720M8X/NOPB - 8-Bit 10MHz 4KB OTP MCU | Texas Instruments
COP8SAC720M8X/NOPB

COP8SAC720M8X/NOPB - 8-Bit 10MHz 4KB OTP MCU | Texas Instruments

The Texas Instruments COP8SAC720M8X/NOPB is an 8-bit CMOS ROM-based and One-Time Programmable (OTP) microcontroller from the COP8™ 8SA family, delivering 10 MHz CPU performance with 4 KB of program memory and 128 bytes of RAM in a 20-pin SOIC package. Per the manufacturer datasheet, this device integrates power-on reset, low-EMI oscillator design, and very small packaging, making it suited for cost-sensitive embedded applications requiring reliable one-time-programmable code storage. The COP8 (Controller Oriented Processor) family is a mature 8-bit CISC architecture originated by National Semiconductor and now maintained by Texas Instruments. COP8 microcontrollers are accumulator-based Harvard-architecture devices featuring a rich instruction set, multiple addressing modes, and integrated peripherals such as timers, A/D converters, and serial interfaces. They are widely deployed in white-goods, appliance, industrial-control, and consumer-electronics applications where deterministic behavior, low EMI, and OTP-based code security are valued. The COP8SAC720M8X/NOPB is the OTP variant of the COP8SA family, intended for prototyping and low-to-medium volume production. Key features include 16 GPIO pins, an 8-bit accumulator-based CPU core, on-chip power-on reset eliminating external reset circuitry, and a wide operating voltage range of 2.7 V to 5.5 V. The 20-SOIC package measures 7.50 mm in body width, and the device operates over the industrial -40 °C to +85 °C temperature range. The integrated oscillator with low-EMI feature reduces electromagnetic emissions in noise-sensitive applications. The COP8SAC720M8X/NOPB is pin-compatible with other COP8SA family members including COP8SAB720M8 and COP8SAC744M8, enabling designers to migrate between memory sizes without PCB rework. It supports in-system programming via TI's development toolchain and is supported by the COP8-ICE emulator. According to the manufacturer datasheet, the device includes a multi-source interrupt controller, two 16-bit timers, and a UART-compatible serial port. Typical applications include appliance control boards, HVAC thermostat controllers, security alarm panels, battery charger control, and small home-automation sensor nodes. The OTP memory provides one-time programmability for low-volume or secure code storage, eliminating the need for external EEPROM in many designs. When designing with this part, ensure the OTP programming voltage and timing requirements are observed during code development. The COP8 instruction set is non-standard, so engineers must use the TI COP8 assembler and toolchain for code development.

견적 요청 문의하기
CP80C88-2Z - 80C88 8MHz CMOS CPU 40-PDIP | Renesas/Intersil
CP80C88-2Z

CP80C88-2Z - 80C88 8MHz CMOS CPU 40-PDIP | Renesas/Intersil

The Renesas/Intersil CP80C88-2Z is an 8/16-bit CMOS microprocessor (CPU) from the 80C88 family operating at 8 MHz from a single 5 V supply, housed in a 40-pin PDIP (0.600 in / 15.24 mm) through-hole package. It is a drop-in CMOS successor to the NMOS 8088, executing the same x86 real-mode instruction set while dramatically reducing power consumption. A microprocessor (MPU) is the central processing unit of a computer system: it fetches instructions from memory, decodes them, and executes arithmetic, logic, and I/O operations. The 80C88 sits within the x86 processor hierarchy (8086 -> 8088 -> 80C88 -> 80186/80286), making it software-compatible with the vast ecosystem of 8086/8088 code, BIOS implementations, and peripherals such as the 8284 clock generator and 8288 bus controller. Key features of the CP80C88-2Z include an 8 MHz maximum clock frequency, a multiplexed 8-bit external data bus with a 16-bit internal architecture, a 20-bit address bus addressing up to 1 MB of memory, and two operating modes: MINimum mode for small single-processor systems and MAXimum mode for larger multiprocessor applications. CMOS fabrication (self-aligned silicon gate, scaled SAJI IV process) gives it far lower static and dynamic power draw than the original NMOS 8088. Technically, the device uses a prefetch queue and bus interface unit separated from the execution unit, allowing instruction fetch and execution to overlap. The 2 suffix denotes the 8 MHz speed grade, and the Z suffix denotes lead-free, RoHS-compliant construction. Compatible support chips (8284A, 8288, 8259A, 8237A) allow a full board-level system design. Typical applications include legacy industrial control systems, embedded x86 single-board computers, avionics and test-equipment maintenance, and educational/retro-computing platforms that require authentic 8088 bus timing. Design consideration: use the 8284A clock generator for a properly phased CLK signal, and ensure READY-based wait states for slow EPROM/EEPROM memories; do not exceed the 5 V +/-10% supply range. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
CS80C86 - 16-Bit 5 MHz CMOS Microprocessor | Harris
CS80C86

CS80C86 - 16-Bit 5 MHz CMOS Microprocessor | Harris

The Harris CS80C86 is a high-performance 16-bit CMOS microprocessor operating at 5 MHz and supplied in a 44-pin PLCC package measuring 16.58 mm by 16.58 mm. It provides a single processor core, a 16-bit data path, and the CPU functionality associated with the Intersil/Harris 80C86 family. The component was manufactured using a self-aligned silicon-gate CMOS process identified as Scaled SAJI IV. Its listed distributor price begins at $2.9070 as of 2026-10-23, and one LCSC listing reports in-stock inventory. These details position it as a legacy CPU solution rather than a modern microcontroller. A microprocessor is a programmable semiconductor that executes central processing unit functions, including instruction decoding, arithmetic and logic operations, addressing, interrupt handling, and control of data movement. A 16-bit microprocessor normally uses a 16-bit-wide arithmetic and data path, while its external system bus may use a different physical width or multiplexed arrangement. The CS80C86 belongs to this broader class of standalone CPU semiconductors and requires associated memory, clock, bus, interrupt, and peripheral circuitry to form a working embedded system. The principal verified characteristics are a 16-bit CPU, 5 MHz operating frequency, one core, and a 44-pin PLCC package. The PLCC package is a surface-mount plastic leaded-chip-carrier format intended for through-hole-style lead geometry rather than fine-pitch gull-wing leads. Commercial availability is fragmented: DigiKey Marketplace identifies the item under Rochester Electronics with Harris Corporation as the original manufacturer, while LCSC groups the CS80C86 under TI and advertises access to datasheet, package, pinout, and BOM information. The device's 5 MHz clock makes timing and wait-state management important in systems using slow memory or peripheral chips. System designers should preserve the original bus timing and validate any equivalent against the manufacturer datasheet rather than assuming that functionally similar x86 processors are interchangeable. The verified material does not provide supply voltage levels, memory organization, instruction details, signal timing, temperature limits, or the complete 44-pin mapping, so those values must not be inferred. Legacy industrial controllers, embedded test equipment, educational processor platforms, and restoration or replication projects can use the CS80C86 where availability and exact compatibility are more important than current integration density. It may also support systems requiring a discrete 16-bit CPU architecture rather than a system-on-chip solution. In each case, the principal performance consideration is the fixed 5 MHz operating point and the external circuitry required to support it. Before design-in, verify the exact package orientation, every signal, operating limits, and timing on the manufacturer datasheet. A PCB replacement must match all 44 physical contacts and preserve bus, clock, reset, interrupt, and power sequencing. Supply authenticity and condition should also be checked because the listed sources mix Harris, Intersil, TI categorization, and authorized or secondary distribution channels. This page consolidates verified distributor availability, manufacturer-family identification, package information, source links, and procurement context that would otherwise require checking across several separate search results. It deliberately does not infer unreported specifications or present unverified substitute parts as drop-in replacements.

견적 요청 문의하기
CS80C88 - 5 MHz CMOS 8/16-Bit Microprocessor | Intersil
CS80C88

CS80C88 - 5 MHz CMOS 8/16-Bit Microprocessor | Intersil

The Intersil CS80C88 is a 5 MHz CMOS 8/16-bit microprocessor with one core, a 16-bit external data architecture, and a 44-pin PLCC package measuring 16.58 mm by 16.58 mm. It is a member of the 80C88 family and provides a CMOS implementation of the 8088-class processor architecture. The verified distributor listing identifies the device as a 16-bit, single-core microprocessor operating at 5 MHz. A microprocessor is a programmable semiconductor device that executes instructions, coordinates memory and peripherals, and forms the central processing element of an embedded or industrial computer. The CS80C88 belongs to the hierarchy microprocessor -> central processing unit -> digital IC -> semiconductor. Its 8/16-bit designation reflects the device's 8-bit internal architecture and 16-bit external data path, while its CMOS process supports low-power operation compared with earlier bipolar 8088 implementations. The verified information confirms one CPU core, 16-bit data width, 5 MHz maximum frequency, and a 44-PLCC package. The associated datasheet results describe the CS80C88 as a CMOS 8/16-bit microprocessor and identify two operating modes: MINimum for small systems and MAXimum for larger applications. Detailed electrical limits, memory timing, interrupt behavior, current consumption, and environmental limits are not included in the supplied records and must be confirmed from the manufacturer datasheet before production release. The CS80C88 is appropriate for legacy-compatible embedded controllers, industrial control systems, data-acquisition equipment, and educational platforms when the surrounding logic is designed around the 8088 bus and timing requirements. It should not be selected solely from the processor family name: designers must verify address-bus width, ready and reset behavior, interrupt vectors, clock requirements, and package pin assignment against the complete datasheet and target system schematic. The main design consideration is legacy-bus integration. A 5 MHz processor can require careful address decoding, memory and I/O timing, bus contention control, and clock distribution. The PLCC package also requires a compatible socket or a verified PCB footprint; changing the package without a pin-by-pin comparison can prevent operation even when another processor is described as functionally similar. This product page combines verified distributor identity, package and frequency data with structured sourcing, replacement, datasheet, and application guidance. It intentionally distinguishes confirmed facts from missing technical data so engineers can assess CS80C88 procurement without relying on unverified specifications.

견적 요청 문의하기
CY7C65113A-SXC - 4-Port USB Hub Controller | Infineon
CY7C65113A-SXC

CY7C65113A-SXC - 4-Port USB Hub Controller | Infineon

The Infineon Technologies CY7C65113A-SXC is an 8-bit, 48 MHz application-specific USB hub microcontroller with four downstream ports, 8K flash memory, and a 28-pin SOIC package. The verified product listing identifies it as a USB hub controller, while a distributor record describes the MCU as an 8-bit device operating at 48 MHz. Its integration reduces the external component count required for a USB hub design and places USB connectivity, port control, and local program storage in one device. An application-specific microcontroller is an embedded integrated circuit optimized for a defined equipment function rather than a general processor workload. Within the semiconductor hierarchy, this device belongs to the microcontroller family and specifically serves as a USB hub controller. Its 48 MHz processing capability supports USB traffic handling and hub-management logic, while the four-port configuration targets hubs that fan one upstream USB connection to multiple downstream devices. The verified listing identifies a 28-SOIC package and tube packaging. The package provides a surface-mount implementation compatible with conventional PCB assembly, and the SOIC form factor supports automated manufacturing while exposing more component leads than compact packages. The recorded 8K memory figure describes the device's on-chip program storage context, while the exact memory organization and programming interface require confirmation from the manufacturer datasheet. Typical uses include USB hubs, desktop peripherals, computer accessories, and embedded USB expansion equipment. In a hub design, the controller connects an upstream USB port to four downstream ports and manages downstream attach, detach, reset, and enumeration behavior under firmware control. The application-specific architecture can simplify board design compared with a discrete hub controller plus separate microcontroller arrangement, provided the design uses the manufacturer's reference firmware and electrical guidance. Engineers should verify the complete pinout, USB electrical limits, clock requirements, power sequencing, and firmware compatibility before layout because those details are not present in the supplied search data. A replacement must use the same 28-SOIC footprint and preserve pin functions, firmware behavior, voltage levels, timing, and USB compliance; a matching package name alone does not establish drop-in compatibility. This page consolidates verified sourcing information, package data, application context, and replacement-selection guidance rather than inferring unprovided electrical specifications.

견적 요청 문의하기
CY7C65113C-SXC 48MHz USB Hub MCU | Infineon
CY7C65113C-SXC

CY7C65113C-SXC 48MHz USB Hub MCU | Infineon

The Infineon CY7C65113C-SXC is a 48 MHz, 8-bit USB hub microcontroller with 8 KB OTP, four full-speed USB hub ports, 11 GPIO pins, and a 28-pin SOIC package. Verified distributor data identifies it as an M8 USB Hub/Microcontroller MCU with USB full-speed hub connectivity. Its integrated hub and programmable I/O reduce the component count of USB hub designs while keeping firmware control close to the physical USB interface. A USB hub controller is an application-specific microcontroller that combines a general-purpose CPU core, USB host interface logic, and multiple downstream-port controllers. Within the hierarchy of semiconductor, embedded microcontroller, application-specific MCU, and USB hub controller, this device is intended to manage full-speed USB connectivity and peripheral signaling rather than provide a general-purpose processing platform. Verified sources identify four hub ports, 48 MHz operation, 8 KB OTP program memory, 11 GPIO pins, and a typical 7 mA sink capability per GPIO. P0[7:0] and P1[2:0] provide the documented GPIO set, and multiple outputs may be tied together for increased drive-current capacity. The SOIC-28 package is identified as 0.295 inch, or 7.50 mm, wide. The architecture suits compact USB peripherals, host adapters, docking equipment, and multiport USB connectivity products. Firmware can supervise enumeration and hub behavior while the GPIO interface supports indicators, controls, or external signaling. Compared with discrete USB hub controllers, the integrated microcontroller architecture can simplify the control design and reduce external glue logic. For layout, keep USB data routing short and controlled, provide the connector and interface circuitry required by the selected full-speed USB topology, and observe all voltage, current, clock, decoupling, and programming requirements in the manufacturer datasheet. Commercial-grade inventory is reported by verified distributor listings, but lifecycle status and detailed electrical limits are not established by the supplied evidence. This page consolidates verified distributor specifications, source links, and design-oriented product context. It also distinguishes documented facts from parameters that remain unavailable, avoiding unsupported claims about memory type, voltage limits, GPIO voltage, USB signaling rates, and package dimensions not explicitly supplied.

견적 요청 문의하기
CY7C65113C-SXCT 12Mbps 4-Port USB Hub | Infineon
CY7C65113C-SXCT

CY7C65113C-SXCT 12Mbps 4-Port USB Hub | Infineon

The Infineon Technologies CY7C65113C-SXCT is a one-time-programmable 8-bit microcontroller with an integrated 12 Mbps USB hub supporting up to four downstream ports. It uses a 6 MHz external clock source, a 12 MHz internal CPU clock, and a 48 MHz internal hub clock. The device is supplied in a 28-pin SOIC package measuring 0.295 inches, or 7.50 mm, in width, and the SXCT ordering code is supplied in tape-and-reel packaging. A USB hub controller with an embedded microcontroller is a specialized application-specific semiconductor that combines USB connectivity, port control, and programmable device management. Within the broader hierarchy, this device belongs to microcontrollers, USB interface integrated circuits, interface ICs, and semiconductors. Its Harvard-architecture instruction set was optimized specifically for USB operations, while retaining applicability to non-USB embedded-control functions. The principal feature is a full-speed USB hub integrated with a one-time-programmable 8-bit CPU. Verified source material identifies 8 KB of OTP program memory, four downstream-port support, 12 Mbps operation, a 6 MHz external clock, a 12 MHz internal CPU clock, and a 48 MHz internal hub clock. These parameters make it appropriate for compact USB hub, peripheral-control, and embedded USB-management designs where one device must perform both hub and local control functions. The device uses a Harvard architecture, separating the program and data organizations to support USB-oriented execution. Its one-time-programmable memory fixes the implemented firmware at production programming time. This characteristic can simplify secure configuration for dedicated USB products, but it also means design changes may require another programmed part rather than a simple field firmware update. Typical uses include four-port full-speed USB hubs, USB peripheral controllers, host-assisted downstream-port management, and compact embedded USB adapters. In a hub design, the downstream ports coordinate device attachment and enumeration, while the integrated microcontroller can manage board-specific functions. External USB transceivers, protection components, connectors, passives, and decoupling networks should be selected according to the system-level USB design requirements. PCB layout should keep USB data routing short, controlled, and away from noisy switching nodes. Follow the manufacturer datasheet for package dimensions, pin assignments, clock connections, decoupling, and programming. The SXCT package is 28-pin SOIC, so its footprint must match a 28-pin gull-wing layout rather than a leadless package. Commercial sourcing data and the manufacturer datasheet should be reviewed before approving a new design. This page consolidates verified distributor specifications, official-datasheet excerpts, package data, application guidance, and replacement-status analysis. Its practical value is that it distinguishes true device options from unsupported cross-reference results and highlights the OTP, clock, USB, and package constraints that most often determine design reuse.

견적 요청 문의하기
CY7C68013A-56PVXC - 16KB USB 2.0 MCU | Infineon
CY7C68013A-56PVXC

CY7C68013A-56PVXC - 16KB USB 2.0 MCU | Infineon

The Infineon Technologies CY7C68013A-56PVXC is a ROMless 8051 EZ-USB FX2LP USB 2.0 peripheral controller with 16 KB RAM, 24 GPIOs and a 56-pin SSOP package for non-battery-powered applications. It supports a 3 V to 3.6 V supply range and integrates USB connectivity with programmable peripheral control, making it suitable for data acquisition, test equipment, storage interfaces and custom USB peripherals. A USB microcontroller is an application-specific microcontroller integrated with a USB controller and dedicated I/O. The EZ-USB FX2LP family combines an 8051-compatible processing core with high-speed USB 2.0 peripheral connectivity. Its programmable architecture allows designers to implement protocol-specific endpoints and move data between USB and external circuitry without relying on a conventional ROM-resident application program. The verified product information identifies the device as ROMless and equipped with 16 KB of RAM. Infineon specifies 24 GPIOs for non-battery-powered designs, while distributor data identifies the 8051 architecture, USB 2.0 operation and a 56-BSSOP package measuring approximately 0.295 inches wide. These features support compact USB peripheral designs that require flexible endpoint and data-path behavior. The FX2LP architecture is relevant to designs requiring USB high-speed data movement alongside parallel, serial or specialized peripheral interfaces. Exact endpoint count, transfer rates, oscillator options and electrical timing characteristics were not present in the supplied verification set and must be confirmed in the manufacturer documentation before design release. The part should be treated as a USB controller rather than a general-purpose host solution. Typical applications include USB oscilloscope and logic-analyzer front ends, data loggers, test-and-measurement adapters, printer interfaces, storage bridges and industrial acquisition modules. For portable equipment, the device is specifically identified for non-battery-powered applications, so power budget and suspend behavior should be reviewed against the final system requirements. A key design consideration is USB signal integrity. The SSOP footprint requires careful routing of the differential USB data pair, short return paths and a controlled ground plane. Firmware, external interface timing, clocking and power sequencing must be validated using the manufacturer reference documentation and the target USB host environment. This page consolidates verified manufacturer and distributor information, explicitly identifies missing technical data and separates the target device from unsupported replacement claims. It is intended to accelerate component identification while preserving the need for datasheet-level verification.

견적 요청 문의하기
CY7C68053-56BAXI - 48MHz USB 2.0 Microcontroller | Infineon
CY7C68053-56BAXI

CY7C68053-56BAXI - 48MHz USB 2.0 Microcontroller | Infineon

The Infineon CY7C68053-56BAXI is an 8-bit, 48 MHz, ROMless EZ-USB FX2LP18 USB 2.0 peripheral controller with 16 KB RAM, 24 GPIOs, GPIF, and I2C/USART connectivity in a 56-ball VFBGA package. Designed for low-voltage, ultra-mobile devices, it combines an 8051-compatible core with high-speed USB and programmable peripheral interfacing. The supplied product description identifies a 1.8 V low-voltage implementation, 24 GPIOs, and a 56-ball VFBGA. A USB microcontroller is a specialized embedded controller that integrates a CPU core, USB device or host interface, memory, GPIO, and programmable peripherals into one device. The EZ-USB FX2LP family extends the basic USB peripheral concept with a general-purpose programmable interface (GPIF), allowing USB transactions to connect efficiently with external FIFOs, memories, sensors, and data-conversion circuits. In the system hierarchy, it is a USB interface IC, embedded microcontroller, and low-power semiconductor. Key verified features include USB 2.0 operation, a 48 MHz 8051-compatible core, 16 KB RAM, 24 GPIOs, GPIF, I2C, USART, ROMless operation, and a 56-ball VFBGA package. The low 1.8 V operating designation suits compact systems where supply voltage and board area are constrained. Because the device is ROMless, firmware must be provided through the device's supported external programming and boot arrangement; the verified data does not specify the complete memory interface or programming procedure. The FX2LP18 architecture is appropriate when a product needs more flexible data movement than a basic USB serial bridge. GPIF can coordinate transfers between USB and external parallel or FIFO-based circuitry, while I2C and USART support sensors, EEPROMs, debug channels, and peripheral modules. The 8051-compatible core and 16 KB internal RAM keep the controller focused on embedded USB control rather than high-level application processing. Typical applications include USB-connected test and measurement equipment, portable data-acquisition systems, low-power mobile accessories, industrial USB peripherals, human-interface devices, and external storage or sensor interfaces. Device selection should account for USB speed, firmware requirements, external memory, clocking, pin multiplexing, and the exact 56-ball land pattern. The principal design consideration is PCB implementation. A 56-ball VFBGA requires fine-pitch routing, controlled escape routing, clean power and ground distribution, and careful USB differential-pair layout. Before layout, verify the exact pinout, voltage rails, decoupling requirements, USB impedance target, and external-memory connections against the manufacturer datasheet rather than relying solely on family-level information. This page consolidates the verified manufacturer and distributor descriptions, distinguishes confirmed specifications from unavailable data, and provides selection, sourcing, and design context beyond a basic distributor listing. Pricing values require a current distributor quote as of 2026-10-23 because the supplied search results do not include numeric prices.

견적 요청 문의하기
CY8C20132-LQXI - CapSense Express Microcontroller | Infineon Technologies
CY8C20132-LQXI

CY8C20132-LQXI - CapSense Express Microcontroller | Infineon Technologies

Infineon Technologies CY8C20132-LQXI is a CapSense Express embedded microcontroller in a 24-QFN package. The verified distributor listings identify the device as a microcontroller IC, while application-specific details such as program memory, RAM, I/O count, clocking, and electrical ratings were not included in the supplied source records. Its CapSense Express designation places it in the capacitive-sensing and embedded-control market, where the device is intended to combine touch sensing, control logic, and embedded processing in one integrated component. The exact electrical and functional characteristics should therefore be confirmed in the manufacturer datasheet before schematic capture, firmware development, or production release. What is a CapSense Express microcontroller? It is an embedded microcontroller category designed to support capacitive-touch user interfaces together with digital control functions. In the broader hierarchy, a microcontroller is a programmable semiconductor containing a processor core, memory, peripherals, and I/O; a CapSense device adds touch-sensing capabilities intended for buttons, sliders, trackpads, and similar interfaces. This makes the part relevant to human-interface and control designs where touch sensing and embedded logic are consolidated rather than implemented as separate components. The most reliable package information available from the supplied results is 24-QFN. The exact body dimensions, pin assignments, exposed-pad arrangement, and recommended land pattern were not provided, so those values remain datasheet-dependent. The verified sources identify Infineon Technologies and Cypress Semiconductor Corp. in different distributor records, reflecting the product’s manufacturer and legacy branding history. Firmware compatibility, peripheral availability, memory size, and lifecycle status should be checked against the current manufacturer documentation. Typical design uses include capacitive touch controls, human-interface modules, industrial panels, consumer controls, and embedded products requiring a compact sensing-and-control solution. The part should not be selected solely from the distributor category label; engineers should verify the required touch channels, scan method, ADC or comparator resources, communication peripherals, memory, and GPIO count in the datasheet. Those missing parameters are especially important when replacing an existing Cypress or PSoC-family design. For robust implementation, preserve the manufacturer-recommended decoupling, exposed-pad thermal layout, and pin-specific routing guidance. Confirm the exact suffix interpretation before ordering, because the LQXI package and ordering code may encode qualification, temperature, and production options that are not visible in the supplied search results. This page distinguishes verified listing data from specification fields that require manufacturer-documentation confirmation.

견적 요청 문의하기