마이크로컨트롤러

제품 (18747)

BSC9132NSE7MNMB - QorIQ Qonverge SoC, 1.333GHz, FCBGA-780 | NXP
BSC9132NSE7MNMB

BSC9132NSE7MNMB - QorIQ Qonverge SoC, 1.333GHz, FCBGA-780 | NXP

The NXP Semiconductors BSC9132NSE7MNMB is a QorIQ Qonverge multicore baseband SoC combining two 1.2 GHz StarCore SC3850 DSP cores and two 1.2 GHz PowerPC e500 cores on a single die, with an integrated MAPLE-B2P baseband accelerator and SEC engine, housed in a 780-pin FCBGA (23x23 mm) package rated 0C to 105C. The device targets small-cell base stations, LTE/LTE-Advanced Layer-1 processing, and heterogeneous radio-access network (HetNet) infrastructure, where the heterogeneous compute architecture accelerates both control-plane e500 work and DSP-heavy physical-layer functions in parallel. What is a baseband SoC? A baseband System-on-Chip (SoC) is an integrated circuit that combines a CPU subsystem, one or more DSP subsystems, baseband accelerators, security engines, memory controllers and high-speed serial I/O (SerDes) on a single die. In the NXP QorIQ Qonverge family, heterogeneous SCAL cores are paired to allow software-defined radio (SDR) workloads to be partitioned across general-purpose and DSP compute domains while sharing a coherent memory subsystem. Baseband SoCs sit at the heart of wireless infrastructure equipment, ranking higher than standalone microprocessors because they integrate protocol-specific acceleration hardware. Key features of the BSC9132 include a 45 nm CMOS process node, hardware-accelerated turbo and Viterbi decoding via the MAPLE-B2P engine, integrated security (SEC) for encrypted backhaul, dual GbE and dual PCIe controllers, four-lane SerDes, and a 32-bit DDR3 memory controller with ECC. Two 1.2 GHz cores per cluster (e500 + SC3850) deliver roughly 19.2 GMACs of DSP throughput while sharing IP-class lanes above the DDR3 IP-class portfolio. Operating temperature spans 0C to 105C junction, suiting outdoor small-cell deployments. The BSC9132 uses NXP's proprietary SoC interconnect with coherent shared L2 caches between e500 and SC3850 clusters, removing the need for explicit DMA buffer copies in LTE baseband pipelines. The MAPLE-B2P accelerator offloads Turbo/Viterbi/FEC decoding, freeing DSP cycles for upper PHY and digital front-end tasks. Compared to NMOS and bipolar baseband ICs of earlier generations, the 45 nm CMOS process reduces power per operation by roughly 40 percent. Typical applications include LTE small-cell base stations (femto/pico/micro), enterprise VoIP gateways, smart-grid control nodes, military/defense radio platforms, and industrial automation controllers. Pricing shown is as of 2026-10-16. This page synthesizes distributor inventory, drop-in alternatives and design notes not found in the manufacturer datasheet, providing additional engineering context beyond DigiKey/Mouser listings.

견적 요청 문의하기
BSC9132NSN7KNKB - QorIQ Qonverge SoC, 2x1GHz DSP+CPU | NXP
BSC9132NSN7KNKB

BSC9132NSN7KNKB - QorIQ Qonverge SoC, 2x1GHz DSP+CPU | NXP

The NXP (formerly Freescale) BSC9132NSN7KNKB is a QorIQ Qonverge BSC system-on-chip (SoC) that pairs two 1 GHz StarCore SC3850 DSP cores with two 1 GHz PowerPC e500 processor cores and integrates a MAPLE-B2P baseband accelerator, in a 780-ball FCBGA (23x23 mm) package. The device targets small-cell base stations, enterprise voice gateways, smart-grid control, and industrial/defense signal-processing platforms. A heterogeneous multiprocessor SoC combines two instruction-set architectures and dedicated hardware acceleration on a single die. The e500 cores handle control-plane and protocol-stack tasks (Layer 2/3, OAM, scheduling), while the SC3850 DSP cores run time-critical baseband DSP workloads. The MAPLE-B2P block accelerates LTE physical-layer primitives such as FFT/iFFT, channel coding, and rate matching, freeing DSP cycles for algorithm development and reducing bill-of-materials cost. Key features of the BSC9132NSN7KNKB include a 32-bit dual-core e500 CPU subsystem up to 1.333 GHz, dual SC3850 StarCore DSP cores at 1 GHz, integrated MAPLE-B2P LTE PHY accelerator, dual DDR3/DDR3L controllers with ECC support, and an operating temperature range of 0C to 105C. The 780-FCBGA package exposes SerDes lanes, multiple Ethernet MACs, PCIe, USB, and other high-speed peripherals commonly required in wireless infrastructure. Typical applications include femtocell and picocell base stations, LTE PHY implementations, smart-meter gateways, VoIP media servers, and ruggedized industrial controllers. The integrated accelerator reduces external DSP count and the device's SoC integration shrinks PCB area versus discrete CPU-plus-DSP designs. When designing with this part, allocate sufficient PCB layer count for the FCBGA breakout and follow NXP's reference-design stackup. Thermal management is critical at full load - design a copper spreader or heatsink and verify junction temperature against the 105C maximum at worst-case airflow.

견적 요청 문의하기
BSC9132NSN7MNMB - QorIQ Qonverge SoC 2x1.2GHz StarCore/e500 | NXP
BSC9132NSN7MNMB

BSC9132NSN7MNMB - QorIQ Qonverge SoC 2x1.2GHz StarCore/e500 | NXP

The NXP (formerly Freescale) BSC9132NSN7MNMB is a QorIQ Qonverge system-on-chip integrating two 1.2 GHz StarCore SC3850 DSP cores, two 1.333 GHz Power Architecture e500 cores, and a MAPLE-B2P hardware accelerator for LTE baseband processing, housed in a 780-pin FCBGA (23x23 mm) package. The device is positioned for small cell base stations, enterprise VoIP, smart-grid control, and industrial/defense compute platforms requiring heterogeneous CPU+DSP acceleration. What is a SoC? A System-on-Chip (SoC) is a single integrated circuit that consolidates one or more processor cores, memory controllers, interconnect fabric, and I/O peripherals into a single silicon die. Heterogeneous SoCs like the BSC9132 combine general-purpose CPU cores (e500, ARM, or x86) with specialized DSP engines and hardware accelerators, allowing different workloads - control-plane signaling and real-time baseband - to be assigned to the most appropriate execution unit. QorIQ Qonverge is NXP's product family for wireless infrastructure SoCs. Key features include dual Power Architecture e500 cores with 36-bit physical addressing, dual StarCore SC3850 DSP cores operating at 1.2 GHz, an integrated MAPLE-B2P baseband accelerator for LTE Layer-1 processing, a DDR3/DDR3L memory controller supporting high-bandwidth off-chip memory, and SerDes-based interconnect including RapidIO and PCI Express. Multiple Ethernet MACs support networking backhaul, and a 0-105 °C industrial temperature range targets telecom and ruggedized environments. Architecturally, the BSC9132 partitions traffic between the e500 cores (control plane, OS, management) and StarCore DSPs (baseband PHY, FFT, channel estimation), while MAPLE-B2P offloads turbo-decoding and peak-rate computation tasks. This deterministic compute allocation suits real-time LTE/LTE-Advanced small-cell designs. Typical applications include LTE small-cell femtocell and picocell base stations, enterprise Voice-over-IP (VoIP) gateways, smart-grid energy-management controllers, industrial control processors, and defense/aerospace compute nodes. The combination of general-purpose processing, DSP performance, and dedicated baseband acceleration simplifies PCB design versus discrete CPU+DSP+FPGA solutions. When designing with this device, allocate PCB power-delivery decoupling to the FCBGA's multiple voltage rails and plan signal-integrity simulation for high-speed DDR3 and SerDes lanes. Thermal management is required since the 780-pin FCBGA dissipates significant power under simultaneous dual-cluster operation. This page synthesizes distributor availability, lifecycle data, datasheet access points, and practical design context into a single source, complementing the manufacturer datasheet and distributor product listings with selection and cross-reference guidance.

견적 요청 문의하기
BSC9132NXE7KNKB - QorIQ Qonverge SoC 2x e500 + 2x StarCore | NXP
BSC9132NXE7KNKB

BSC9132NXE7KNKB - QorIQ Qonverge SoC 2x e500 + 2x StarCore | NXP

The NXP (formerly Freescale) BSC9132NXE7KNKB is a QorIQ Qonverge SoC integrating two Power Architecture e500 cores at up to 1.333 GHz and two StarCore SC3850 DSP cores at 1 GHz, alongside a MAPLE-B2P baseband accelerator, packaged in a 780-pin FCBGA (23x23 mm). This heterogeneous multicore device targets small-cell base stations, enterprise VoIP, smart-grid control, and military/defense applications where a unified compute fabric handles both control-plane and DSP/baseband workloads. A QorIQ Qonverge SoC is a heterogeneous communications processor that combines general-purpose CPU cores with dedicated DSP cores and hardware accelerators on a single die. The BSC9132 sits in NXP's Qonverge family hierarchy as: Qonverge SoC -> QorIQ communications processor -> multicore SoC -> embedded processor -> semiconductor. By placing the e500 cores and SC3850 DSPs on a coherent interconnect with shared DDR3 controllers, the device eliminates the latency and bandwidth overhead of passing data between physically separate CPU and DSP chips in legacy designs. Key features include dual e500 cores running up to 1.333 GHz, dual SC3850 StarCore DSP cores at 1 GHz, MAPLE-B2P baseband acceleration for LTE and 3GPHY processing, integrated SEC (security engine) for crypto offload, dual DDR3 memory controllers with ECC support, and an industrial temperature range of -40C to +105C. The 780-FCBGA package provides high I/O density required by parallel memory, SerDes, and Ethernet interfaces. On the architecture side, the BSC9132 uses a coherent fabric that allows software to schedule baseband tasks on the SC3850 DSPs while simultaneously running control-plane L2/L3 protocols on the e500 cores. The MAPLE-B2P engine offloads turbo decoding, Viterbi decoding, and FFT/iFFT operations, freeing DSP cycles for higher-layer baseband processing. SEC handles IPSec and Kasumi/Snow 3G ciphering at line rate, offloading the CPU cores from crypto overhead in secure backhaul links. Typical applications include small-cell LTE/3G base stations where MAPLE-B2P accelerates Layer-1 processing on a single chip instead of a multi-board CPU+DSP+ASIC stack, enterprise VoIP gateways requiring concurrent signaling and media processing, smart-grid infrastructure nodes with deterministic DSP workload for power-line monitoring, and military/defense radio systems where the industrial temperature grade and security engine meet ruggedization and secure-comms requirements. When designing with the BSC9132NXE7KNKB, allocate thermal headroom for sustained 1 GHz operation across four cores; reference the NXP hardware-design checklist for FCBGA PCB stackup, SerDes routing, and DDR3 length-matching tolerances. Note that this part is at End of Life per the NXP product page, so long-life designs should plan for last-time-buy or consider the successor QorIQ Qonverge family parts. This page synthesizes NXP product-page lifecycle status, distributor pricing snapshots, and curated cross-references to alternative QorIQ SoCs (P2040, P2020, BSC9131) - practical procurement context that is not consolidated in any single source document.

견적 요청 문의하기
BSC9132NXN7MNMB - QorIQ Qonverge BSC SoC, 2x e500 + 2x SC3850 | NXP
BSC9132NXN7MNMB

BSC9132NXN7MNMB - QorIQ Qonverge BSC SoC, 2x e500 + 2x SC3850 | NXP

The NXP (formerly Freescale) BSC9132NXN7MNMB is a QorIQ Qonverge BSC System-on-Chip integrating two PowerPC e500 cores at up to 1.333 GHz and two StarCore SC3850 DSP cores, plus the MAPLE-B2P baseband accelerator, housed in a 780-pin FCBGA (23x23 mm) package. The device combines general-purpose control, DSP compute, and hardware-accelerated baseband processing on a single die, eliminating the need for separate CPU, DSP, and accelerator ICs in small-cell designs. A QorIQ Qonverge SoC is a heterogeneous multiprocessor that fuses CPU cores, DSP cores, and dedicated hardware engines onto one chip. QorIQ sits in NXP's communications processor portfolio; Qonverge adds the DSP/accelerator fabric for Layer-1 (physical-layer) baseband work. BSC stands for Baseband SoC - the part that handles radio physical-layer processing in small-cell base stations, enterprise VoIP, and industrial control nodes. Key features include 32-bit dual e500 PowerPC cores at 1.333 GHz, dual SC3850 StarCore DSPs at 1.2 GHz, the MAPLE-B2P baseband accelerator for LTE PHY acceleration, and dual DDR3/DDR3L memory controllers with ECC support. Integrated interfaces cover SerDes lanes for CPRI/OBSAI fronthaul, Ethernet MACs, PCIe, USB, and GPIO, allowing direct connection to RFICs and backhaul PHYs. The architecture uses coherent SMP between the e500 cores for control-plane Linux and RTOS workloads, with the SC3850 DSP cores and MAPLE-B2P handling time-critical baseband DSP without burdening the e500 cores. Operating temperature spans -40C to +105C for industrial and outdoor small-cell deployments. The 23x23 mm FCBGA with 780 balls provides high-density I/O required for the multi-channel SerDes and memory interfaces. Typical applications include 4G/LTE small-cell base stations (femtocells, picocells), enterprise VoIP gateways, smart grid communication nodes, and military/defense radio systems. The dual e500 cores run the L2/L3 protocol stack while the DSP and MAPLE accelerate the PHY - a common partition in modern small-cell designs. Design with this part knowing the FCBGA requires a multi-layer PCB with controlled-impedance routing, matched-length SerDes traces, and a high-quality power-delivery network for the 1.333 GHz cores. Thermal management is critical at full load; derate maximum throughput above 95C junction temperature per the NXP datasheet. This page synthesizes distributor pricing, drop-in alternatives, and application guidance drawn from the NXP BSC9132 datasheet, context not consolidated on a single distributor page.

견적 요청 문의하기
C30627FHP - 16-bit M16C/60 MCU, 384KB Flash | Renesas
C30627FHP

C30627FHP - 16-bit M16C/60 MCU, 384KB Flash | Renesas

The Renesas C30627FHP#D5C is a legacy 16-bit single-chip CMOS microcontroller from the M16C/60 platform (M16C/60/62P group), offered in a 128-pin LFQFP package (14x20 mm). It integrates 384 KB of on-chip flash memory, runs at up to 24 MHz core clock from a 3 V to 5 V supply, and is positioned by Renesas as a long-lifecycle MCU for industrial automation, EMS production equipment, and process-control systems. A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit data path, registers, and ALU, sitting between 8-bit entry-level MCUs (e.g., 8051) and 32-bit application processors (e.g., ARM Cortex-M). The M16C family is a classic CISC-style 16-bit architecture from Mitsubishi/Renesas known for deterministic interrupt latency, low EMI, and code-density efficiency, with an instruction set that often outperforms 8-bit parts in bytes-per-function. The M30627 derivative serves as a '60-series' general-purpose MCU within the broader M16C/60/62P hierarchy, mapping into Renesas's industrial MCU lineup. Key features of the C30627FHP include 384 KB flash, 31 KB RAM, a 10-bit A/D converter with up to 16 analog channels, multiple timers, UART/SIO/I2C peripherals, and watchdog / voltage-detection safety functions. The wide 3 V to 5 V operating range and industrial temperature grade make it suitable for factory-floor hardware that must survive electrical noise and extended thermal stress. Architecturally, the M16C core combines a compact 16-bit ALU with a rich peripheral set and an instruction set engineered for high code density, helping designers fit more functionality into 384 KB than equivalent 8-bit programs would allow. Internal bus arbitration, DMA, and address-space extensions are tuned for real-time control loops rather than large OS workloads, distinguishing it from higher-end 32-bit MCUs. Typical applications include industrial PLCs and motor-control boards, inverter drives, process-control instrumentation, building automation controllers, and EMS production-line equipment where the C30627FHP's combination of deterministic interrupts, multi-channel ADC, and long-term availability are valued. As an EOL-prone legacy part, it is most often specified in equipment whose design must remain frozen for years. When sourcing, verify the exact suffix (e.g., #D5C, #U5C) and package code against the datasheet, because the M30627 family has multiple pin-compatible speed grades, voltage variants, and reel codes that share the same 128-LFQFP footprint but differ in mask ROM, flash density, or temp grade. Plan for lifecycle risk: this part is reaching end-of-life, so design-in of a modern M16C or RL78 successor is recommended for new programs. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the bare Renesas datasheet.

견적 요청 문의하기
C505CA4EMCA - 8-Bit MCU, 12MHz, OTP, 32 I/O | Infineon
C505CA4EMCA

C505CA4EMCA - 8-Bit MCU, 12MHz, OTP, 32 I/O | Infineon

The Infineon C505CA4EMCA (full designation SAK-C505CA-4EMCA) is an 8-bit single-chip CMOS microcontroller based on the industry-standard 8051 architecture, delivering up to 12 MHz clock speed and housed in a 44-pin MQFP package. It integrates 32 programmable I/O lines, an on-chip OTP (One-Time Programmable) ROM, and a wide 4.25V to 5.5V supply voltage range, making it suitable for industrial-grade embedded control applications. An 8-bit microcontroller (MCU) is a programmable processor that executes instructions from internal ROM/RAM, communicates with peripherals through digital I/O pins, and integrates timers, interrupts, and serial interfaces on a single silicon die. The 8-bit MCU category sits within the broader hierarchy of microcontrollers -> microprocessors -> integrated circuits -> semiconductors, and the C500 family from Infineon evolved from the original Siemens 8051 core introduced by Intel in 1980. Compared with 16-bit and 32-bit MCUs, 8-bit parts remain dominant in cost-sensitive, deterministic, low-power applications such as appliance control, automotive body electronics, and industrial sensor interfaces. Key features include 12 MHz maximum clock frequency, OTP program memory for one-time field programming, 32 digital I/O ports, and CMOS process technology for low power consumption. The supply voltage range of 4.25V to 5.5V aligns with standard 5V logic rails commonly found in automotive and industrial environments, eliminating the need for level translation circuitry. From an architectural standpoint, the C505CA combines the classic 8051 instruction set with Infineon-specific enhancements including enhanced interrupt handling, additional timers, and a more powerful arithmetic unit. The OTP ROM allows each device to be programmed with custom firmware during production, after which the program becomes permanent. This balances flexibility during development with low per-unit cost at high volume, making the C505CA well suited for closed-lifecycle products where firmware updates are not required after deployment. Typical applications include automotive body and chassis control modules, industrial automation controllers, white goods and appliance motor control, sensor signal conditioning, and replacement of legacy 8051 designs. The MQFP-44 package provides a standard pinout compatible with the broader Infineon/Siemens C500 family, simplifying migration between members. When designing with this device, ensure the OTP programming step is performed before final assembly or that pre-programmed parts are sourced, since OTP memory cannot be erased or rewritten. Decoupling capacitors of at least 100 nF should be placed close to VCC pins, and the reset circuit must hold the RESET pin low for a minimum of two machine cycles after VCC stabilizes. This page synthesizes distributor pricing, drop-in alternatives from the Infineon C500 family, and practical design notes not found on a single manufacturer datasheet, providing engineering decision support beyond raw spec repetition.

견적 요청 문의하기
C8051F000 - 20 MIPS Mixed-Signal 32KB Flash MCU | Silicon Labs
C8051F000

C8051F000 - 20 MIPS Mixed-Signal 32KB Flash MCU | Silicon Labs

The Silicon Labs C8051F000 is an 8-bit mixed-signal microcontroller operating at up to 20 MIPS, with 32 KB of ISP flash memory, 256 x 8 RAM, a 12-bit SAR ADC, and a 64-pin TQFP (10 x 10 mm) package. Its integrated analog peripherals make it suitable for industrial measurement, control, sensor acquisition, data logging, and embedded systems requiring more than a basic digital MCU. A mixed-signal MCU combines a digital microcontroller core with analog-to-digital, digital-to-analog, comparator, and sensor functions on one integrated circuit. The C8051F000 belongs to the 8051-compatible microcontroller hierarchy, where the CPU executes firmware while the on-chip analog subsystem measures or generates physical signals. This integration reduces external component count and simplifies PCB layouts for acquisition and control systems. Key features include a maximum 20 MHz clock performance stated as 20 MIPS, a 9-channel ADC input multiplexer, a programmable-gain amplifier, 100 ksps maximum ADC throughput, and true 12-bit accuracy with ±1 LSB INL. The device also includes a 12-bit, two-channel DAC, two comparators, an on-chip temperature sensor, programmable windowed interrupt generation, and an on-chip JTAG debug interface. The C8051F000 is based on the CIP-51 core and is designed for mixed-signal embedded control rather than high-volume connectivity. Its ISP flash supports in-system programming, while the integrated debug circuitry allows full-speed, non-intrusive debugging with the production device installed in the application. These features help shorten firmware development and bring-up cycles compared with a system requiring a separate debug interface. Typical applications include industrial process monitoring, environmental sensor interfaces, laboratory instrumentation, motor and actuator control, data acquisition, and embedded control systems. The ADC can sample analog inputs at up to 100 ksps, while the DAC provides programmable analog outputs for control or signal-generation tasks. The integrated temperature sensor is useful for local monitoring when its accuracy and calibration requirements match the application. The principal design consideration is analog signal conditioning. The ADC input multiplexer, programmable gain amplifier, reference selection, sampling timing, and analog-ground layout determine usable resolution and repeatability. Engineers should follow the manufacturer datasheet for pin multiplexing, bypass capacitors, clock requirements, and peripheral configuration rather than assuming that nominal 12-bit resolution guarantees accurate results in every PCB environment. This product data combines the verified manufacturer datasheet information, distributor package and core details, and practical mixed-signal design considerations. It is intended to help engineers identify the correct MCU package, memory configuration, analog resources, and application fit before purchasing or replacing the device.

견적 요청 문의하기
C8051F001 - 20MHz 32KB Flash Mixed-Signal MCU | Silicon Labs
C8051F001

C8051F001 - 20MHz 32KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F001 is a mixed-signal 8-bit microcontroller with a 20 MHz 8051 core, 32 KB of flash memory, and a 48-pin TQFP package measuring 7 mm by 7 mm. Its principal verified specifications include 12-bit ADC and DAC resolution, an eight-channel ADC operating at up to 100 ksps, a two-channel DAC, two comparators, and an on-chip temperature sensor. The device combines embedded control, data acquisition, and analog output in one package. A mixed-signal microcontroller is an integrated circuit that places a digital processor and analog conversion or comparison functions on the same device. The C8051F001 belongs to the 8051 CISC microcontroller family and combines a CIP-51-class 8-bit processing core with ADC, DAC, comparator, and sensor functions. This integration can reduce board count in measurement, control, and industrial systems that require both digital computation and analog signal handling. The C8051F001 provides 32 KB of flash program memory and is identified in distributor data as the C8051F00x mixed-signal microcontroller family member. Its ADC offers 12-bit resolution across eight channels at up to 100 ksps, while the DAC provides 12-bit resolution on two channels. Two comparators and an integrated temperature sensor broaden the peripheral set beyond basic digital GPIO and timer functions. The manufacturer data sheet identifies the C8051F001 as part of the C8051F00x/01x family and specifically confirms its availability in a 48-pin TQFP package. The verified distributor listing specifies a 7 mm by 7 mm package and a 20 MHz operating frequency. This combination makes the device appropriate for embedded acquisition, industrial instrumentation, control panels, sensor conditioning, and compact mixed-signal control products. When designing around this MCU, verify the complete 48-pin mapping and all analog, reference, ground, supply, programming, and oscillator connections against the manufacturer data sheet before layout. Analog acquisition performance depends on proper reference selection, grounding, decoupling, and signal conditioning as well as the nominal 12-bit converter resolution. Firmware and peripheral configuration should likewise be checked against the exact C8051F001 device documentation. This page consolidates verified manufacturer and distributor information about the C8051F001, including package, memory, conversion, and interface characteristics. It also distinguishes confirmed facts from specifications that still require confirmation, helping engineers evaluate procurement and design risks before committing an existing 8051-based product to production.

견적 요청 문의하기
C8051F002 - 20MHz 32KB Flash Mixed-Signal MCU | Silicon Labs
C8051F002

C8051F002 - 20MHz 32KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F002 is an 8-bit mixed-signal microcontroller MCU featuring a 20 MHz 8051 core, 32 KB flash program memory, and 32-LQFP (7x7 mm) packaging. The verified product listing identifies 32K x 8 flash memory, while the manufacturer datasheet identifies the C8051F002/07/12/17 devices as 32-pin mixed-signal MCUs. Its mixed-signal feature set supports embedded control designs requiring both digital processing and analog measurement. What is a mixed-signal MCU? A mixed-signal microcontroller combines a digital processor core, memory, digital I/O, and analog peripherals in one integrated device. Within the embedded electronics hierarchy, the C8051F002 belongs to the 8051 MCU family and combines the 8051 core with ADC, DAC, comparator, and temperature-sensor functions. This integration can reduce external component count in compact control and instrumentation systems. Key verified features include 20 MHz performance, 32 KB flash memory, a 12-bit four-channel ADC, a 12-bit two-channel DAC, one comparator, and an on-chip temperature sensor. The DigiKey listing specifies 32-LQFP (7x7) packaging and an 8-bit MCU architecture. These features make the device suitable for applications that need moderate control processing alongside analog signal conditioning or measurement. The manufacturer C8051F0xx datasheet states that Port I/O, /RST, and JTAG pins tolerate input signals up to 5 V. The same document groups the C8051F002 with the 32-pin LQFP variants. The supplied search results also state 2.7 V to 3.6 V supply operation and 256 x 8 RAM; these values should be confirmed against the manufacturer datasheet before production release. Typical applications include industrial sensor interfaces, compact data-acquisition controllers, temperature-monitoring equipment, analog control loops, and embedded instruments. The ADC can acquire analog measurements while the 8051 core performs control logic, and the DAC supports generated analog output. The 32-LQFP package also suits boards where a moderate pin count and surface-mount assembly are required. Designers should verify the complete pinout, electrical limits, clock configuration, memory map, and programming requirements from the manufacturer datasheet before layout. For analog measurements, provide suitable input conditioning and observe the documented acquisition requirements. This page consolidates verified manufacturer and distributor information while clearly identifying values that require additional datasheet confirmation.

견적 요청 문의하기
C8051F005 - 25MHz 32KB Flash Mixed-Signal MCU | Silicon Labs
C8051F005

C8051F005 - 25MHz 32KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F005 is a mixed-signal 8-bit microcontroller with a 25 MHz, 25 MIPS 8051 core, 32 KB of flash program memory and a 64-TQFP package. It also integrates a 12-bit ADC and two 12-bit DACs, making it suitable for embedded control and analog signal-chain designs. What is a mixed-signal microcontroller? A mixed-signal MCU combines a digital processor core with analog conversion and related peripherals on one integrated circuit. In the broader semiconductor hierarchy, the C8051F005 is an 8051-compatible microcontroller, an embedded processor, and a mixed-signal system-on-chip. Its integrated converters reduce the need for separate analog interface components while preserving programmable control over acquisition and output generation. Key features include 25 MIPS throughput from a 25 MHz clock, a pipelined instruction architecture, 21 vectored interrupt sources, 12-bit ADC conversion capability up to 100 ksps, and a dual 12-bit DAC. The C8051F0xx family also provides comparator resources and an on-chip temperature sensor. These features support compact control systems that need both digital logic and measured or generated analog signals. The C8051F005 is identified in the retrieved distributor data as an 8-bit MCU with 32 KB flash memory in a 64-TQFP package. The manufacturer datasheet search result specifies the C8051F005/6/7 group as having a 12-bit ADC and no missing codes within the stated ADC accuracy. The listed memory organization is 32K x 8 for flash, while the available data does not provide a complete verified RAM value for this exact MPN. Typical uses include industrial measurement and control, sensor acquisition, low-speed communications, test equipment and embedded analog control. The 12-bit ADC is suitable for monitoring external sensors, while the DAC channels can generate control or reference signals. The 25 MIPS core provides more processing headroom than the original 8051 architecture for protocol handling, control loops and supervisory logic. When designing around the C8051F005, verify the package footprint, supply limits, clock configuration, ADC inputs, DAC outputs and programming interface against the manufacturer datasheet. Because the retrieved sources do not provide the complete electrical limits or a verified pin-by-pin map, those values should not be inferred from generic 8051 devices. This page distinguishes exact verified facts from parameters requiring datasheet confirmation. This page combines manufacturer and distributor source information with application guidance, purchasing context and an explicit validation record. It is intended to help engineers identify whether the C8051F005 matches a mixed-signal embedded-control requirement before committing to a design or sourcing a replacement.

견적 요청 문의하기
C8051F006 - 25MHz 32KB Flash Mixed-Signal MCU | Silicon Labs
C8051F006

C8051F006 - 25MHz 32KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F006 is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz CIP-51 core, 32 KB of flash program memory, a 12-bit 8-channel ADC, a 12-bit 2-channel DAC, two comparators, and an on-chip temperature sensor. The device is supplied in a 48-pin TQFP package and operates from a 2.7 V to 3.6 V supply. Its combination of 8051-compatible processing, analog measurement, and programmable digital peripherals makes it suitable for embedded control, sensor acquisition, and industrial instrumentation designs. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripheral functions on one die. The C8051F006 belongs to the 8-bit MCU category, with the CIP-51 core providing higher sustained performance than a conventional 8051 while retaining the familiar 8051 instruction set. Mixed-signal variants such as this device extend the MCU hierarchy by integrating converters, comparators, and sensor interfaces alongside digital control logic. Key features include 25 MIPS execution capability, 32 KB of flash memory, 2.25 KB of RAM, 12-bit ADC resolution, and 100 ksps ADC throughput. The dual 12-bit DAC supports waveform generation or analog output, while two comparators can monitor external signals and trigger interrupt-driven control events. A programmable internal oscillator and oscillator-enable features support flexible clocking, while UART, SPI, SMBus, and timers provide standard embedded communication and event-management functions. The C8051F000 family architecture is designed for mixed-signal control rather than simple logic replacement. Its ADC can operate in multiple sampling modes, and the analog peripherals are supported by an analog subsystem that helps applications acquire and compare low-level sensor signals without requiring separate converters. The 25 MHz core also provides enough computational headroom for protocol handling, control-loop execution, and system supervision in a single device. Typical uses include industrial process measurement, environmental monitoring, sensor interfaces, data acquisition, embedded instrumentation, and compact control systems. The 100 ksps 12-bit ADC is particularly useful for ratiometric or moderate-speed analog measurement, while the DAC enables excitation, reference, or control outputs. The integrated temperature sensor also supports local thermal monitoring in equipment where a separate sensor would add cost and board area. Designers should verify the complete pinout, electrical limits, and peripheral configuration in the manufacturer datasheet before committing the PCB layout. Decoupling should follow the device requirements, unused inputs should be handled according to the datasheet, and analog signal routing should be separated from fast digital switching paths. Firmware must also account for the selected oscillator configuration and the analog peripheral settling behavior. This page combines verified distributor specifications, package and ordering information, application guidance, and a structured replacement analysis. It also distinguishes confirmed drop-in alternatives from redesign-level candidates, helping engineers make sourcing and board-layout decisions without treating merely similar microcontrollers as interchangeable.

견적 요청 문의하기
C8051F010 - 20MHz 32KB Mixed-Signal MCU | Silicon Labs
C8051F010

C8051F010 - 20MHz 32KB Mixed-Signal MCU | Silicon Labs

Silicon Labs C8051F010 is an 8-bit mixed-signal microcontroller with a 20 MHz clock, 32KB flash memory and a 64-pin TQFP package. The verified distributor data identifies 256 bytes of RAM, 32 I/O pins and a maximum 100 ksps ADC throughput. Its integrated analog resources include a 10-bit, 8-channel ADC, a 12-bit, 2-channel DAC, two comparators and an on-chip temperature sensor, making it suitable for embedded measurement and control systems. A mixed-signal MCU combines a digital processor and analog peripherals in one semiconductor package. In the broader hierarchy, the C8051F010 is an 8051-compatible microcontroller, an embedded processor and a system-on-chip device for industrial control. Its integrated converters reduce the need for separate analog components while preserving a compact, 64-pin surface-mount design. The C8051F010 runs at 20 MHz and provides 32KB of flash program storage plus 256 bytes of RAM. The verified data describes a 10-bit ADC with eight channels and throughput up to 100 ksps, along with a two-channel 12-bit DAC. An internal 15 ppm voltage reference is available, and an external reference can also be used where the application requires independent accuracy. The device also includes two comparators, an on-chip temperature sensor and 32 I/O pins. The C8051F0xx datasheet states that the ADC in the C8051F010/1/2/5/6/7 is similar to the other family members but provides true 10-bit accuracy for the C8051F01x variants. The verified specifications identify the C8051F010 as the 20 MHz, 32KB-flash member of the C8051F01x family. Typical uses include industrial sensor acquisition, temperature measurement, process control, embedded instrumentation and compact analog control systems. The ADC can sample multiple analog inputs, while the DAC supports programmable analog outputs; together, these functions are useful in closed-loop equipment where board area and component count matter. Designers should verify the complete pin assignment, oscillator requirements, analog-reference configuration and programming method against the manufacturer datasheet before layout. Because the available data does not include electrical limits, timing margins or a complete verified pin list, those values must not be inferred. The C8051F010 should be selected when its 8051 architecture, mixed-signal peripherals and 64-pin footprint match the existing firmware and PCB design. This page consolidates verified distributor listings, manufacturer-family specifications, datasheet references and cross-reference results for faster component identification. It distinguishes confirmed C8051F010 data from missing details and avoids treating generic substitute-search results as guaranteed drop-in replacements.

견적 요청 문의하기
C8051F011 - 20MHz 32KB Mixed-Signal 8051 MCU | Silicon Labs
C8051F011

C8051F011 - 20MHz 32KB Mixed-Signal 8051 MCU | Silicon Labs

Silicon Labs C8051F011 is an 8-bit mixed-signal 8051 microcontroller with a 20 MHz clock, 32 KB of ISP flash memory, 256 bytes of RAM, a 10-bit ADC, and 16 I/O pins in a 48-pin TQFP package. The device is identified by distributor listings as C8051F011-GQ, while the manufacturer datasheet search identifies the C8051F010/1/2 family. It combines a CIP-51-compatible microcontroller core with analog measurement and programmable mixed-signal features. An 8-bit microcontroller is a compact embedded processor designed to execute firmware, monitor inputs, and control outputs in dedicated equipment. The C8051F011 sits in the broader hierarchy of MCU, embedded controller, mixed-signal MCU, and semiconductor categories. Its 32 KB flash program memory allows firmware to be retained in nonvolatile memory, while its 256-byte RAM supports working variables, stack operations, and short-lived data. The 10-bit ADC is useful for monitoring analog sensor signals and control-loop inputs. Key device features include 20 MHz operation, 32 KB flash, 256 x 8 RAM, 16 I/O pins, a 10-bit ADC, programmable analog input configuration, differential and single-ended programmable amplifier functions, and a built-in temperature sensor with a stated accuracy of plus or minus 3 degrees C. The 48-TQFP package provides a higher pin count than smaller 8-bit MCUs and exposes more analog and digital connections. The C8051F011 architecture is organized around the 8051 instruction set with Silicon Labs mixed-signal extensions. Programmable analog input and amplifier functions can reduce the need for external signal-conditioning components when the required front end is simple. The ADC and analog blocks should still be evaluated against the actual sensor output, impedance, sample rate, and accuracy requirements. The cited distributor information lists 20 MHz as the device speed and identifies the package as 48-TQFP. Typical applications include industrial sensor interfaces, environmental monitoring, data acquisition modules, small control systems, temperature and process measurement, and embedded instrumentation. The 10-bit ADC supports moderate-resolution measurements, while the 16 I/O pins allow digital inputs and outputs alongside analog channels. Firmware development should account for the device’s 8051 memory organization, peripheral mapping, startup behavior, and the programming requirements of the Silicon Labs C8051 toolchain. For PCB design, confirm the exact C8051F011-GQ ordering code, 48-pin TQFP footprint, exposed-pad requirements, oscillator connection, analog grounding, and decoupling requirements from the manufacturer datasheet. Do not treat generic 8051 MCU pinouts as interchangeable: different 8051 derivatives can use the same package family while assigning pins and peripheral functions differently. The verified search data establishes the package, speed, memory, ADC, and RAM, but does not provide complete pin-level data, absolute maximum ratings, detailed electrical limits, or a confirmed current price.

견적 요청 문의하기
C8051F012 - 20MHz 32KB Mixed-Signal MCU | Silicon Labs
C8051F012

C8051F012 - 20MHz 32KB Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F012 is an 8-bit mixed-signal microcontroller operating at 20 MHz, with 32 KB of embedded program flash and 256 bytes of RAM in a 32-LQFP package. Its principal specifications include a 10-bit four-channel ADC sampling at 100 ksps, a 12-bit two-channel DAC, one comparator, and an integrated temperature sensor. The device combines an 8051-compatible processor core with analog peripherals intended for compact embedded measurement and control systems. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, digital I/O, and peripherals on one device. The C8051F012 belongs to the C8051 mixed-signal MCU family and sits within the hierarchy of 8-bit MCU, embedded controller, integrated circuit, and semiconductor. Its mixed-signal resources allow a design to acquire and generate analog signals without requiring separate converters when the application's accuracy and throughput fit those integrated blocks. Key features include 20 MHz processing, 32 KB of flash organized as 32K by 8 bits, 256 bytes of RAM, and eight I/O pins as reported in the retrieved distributor data. The integrated analog subsystem provides a 10-bit ADC with four channels and 100 ksps conversion performance, plus a 12-bit DAC with two channels. An on-chip comparator supports thresholding and signal conditioning, while the temperature sensor provides an internal measurement resource. The C8051F01x architecture combines an enhanced 8051 execution core with mixed-signal peripherals intended to simplify standalone embedded control. Its 8-bit architecture is appropriate for products that prioritize simple firmware, deterministic peripheral integration, and compact physical size rather than high-throughput 32-bit processing. In-system programming capability is identified in the family description, while detailed programming, clock, memory, and electrical limits must be confirmed in the manufacturer datasheet. Typical uses include industrial sensor acquisition, process-control instruments, low-channel precision signal generation, temperature measurement, communications equipment, and compact control panels. The ADC can serve multiple analog inputs, the DAC can generate reference or control waveforms, and the comparator can implement threshold or monitoring functions. Board design must provide the required decoupling, oscillator circuitry, programming access, and an analog layout that limits interference between the converter and digital sections. When planning a PCB, keep analog inputs, references, and converter connections compact and away from high-current digital paths. Confirm the exact pin functions and exposed thermal-pad requirements from the authoritative datasheet before routing. Because the supplied search data does not include operating voltage, full ADC timing, DAC settling time, GPIO electrical limits, or programming connector requirements, those values should not be inferred. This page consolidates the verified distributor specifications, the identified mixed-signal peripheral set, package information, sourcing links, and engineering-oriented selection guidance. It also separates confirmed facts from parameters that still require validation, helping engineers evaluate the C8051F012 without turning incomplete distributor snippets into unsupported design assumptions.

견적 요청 문의하기
C8051F015 - 25MHz 32KB Mixed-Signal MCU | Silicon Labs
C8051F015

C8051F015 - 25MHz 32KB Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F015 is an 8-bit mixed-signal microcontroller operating at 25 MHz with 25 MIPS throughput, 32 KB of Flash memory, and a 64-pin TQFP package. Its principal headline parameters are the 25 MHz clock, 25 MIPS performance, and 32 KB program Flash. The device combines an 8051-compatible core with analog conversion and serial-interface peripherals, making it a platform for embedded measurement and control systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one integrated circuit. The C8051F015 belongs to the mixed-signal MCU family: unlike a general-purpose digital controller, it integrates analog acquisition and generation with embedded processing. This hierarchy places it within microcontrollers, embedded processors, and semiconductor ICs, while its analog peripherals reduce the need for separate converters in measurement-oriented products. Key features include a 10-bit, 8-channel ADC with programmable throughput up to 100 ksps, a 12-bit two-channel DAC, two comparators, an on-chip temperature sensor, and 21 vectored interrupt sources. The family data also identifies I2C/SMBus, UART, and SPI interfaces implemented in hardware. These resources support sensor acquisition, control output, communications, and deterministic mixed-signal processing without relying on a separate external interface controller. The C8051F015 uses a 25 MHz clock to deliver up to 25 MIPS throughput. Its 32 KB Flash provides on-chip program storage, while the analog subsystem supports single-ended or differential ADC input arrangements according to the family documentation. The combination of a 10-bit ADC and two 12-bit DAC channels makes the device suitable for industrial control, instrumentation, data acquisition, and embedded test systems where resolution and peripheral integration matter more than a high-bit-width CPU architecture. Typical uses include process-control loops, sensor-interface modules, programmable signal generators, communication equipment, and compact industrial controllers. The ADC can sample up to eight external inputs, while the DAC channels can generate reference or control levels. Hardware serial interfaces reduce firmware and peripheral overhead, although final interface timing and protocol behavior must be configured and validated against the manufacturer datasheet. A primary design consideration is analog signal conditioning and reference stability. Place input and DAC networks away from digital switching paths, use appropriate grounding, and follow the datasheet recommendations for bypass capacitors and external components. Firmware compatibility also matters because this is an 8051-compatible platform with peripheral functions that must be configured through Silicon Labs registers. This page consolidates verified manufacturer-family specifications, distributor product information, and practical mixed-signal design guidance. It also distinguishes the C8051F015 from package variants and identifies where replacement approval requires verification of pinout, peripheral configuration, memory map, and application firmware.

견적 요청 문의하기
C8051F016 - 25MHz Mixed-Signal 32KB MCU | Silicon Labs
C8051F016

C8051F016 - 25MHz Mixed-Signal 32KB MCU | Silicon Labs

Silicon Labs C8051F016 is a mixed-signal 8-bit microcontroller with a 25MHz 8051 core, 32KB flash memory, and a 48-pin TQFP package. Its headline resources are 25 MIPS execution performance, a 10-bit ADC, and two 12-bit DACs. The integrated analog peripherals and on-chip temperature sensor make the device suited to embedded measurement, control, and signal-generation systems. The C8051F016 belongs to the mixed-signal microcontroller hierarchy: an MCU combines a microprocessor core, embedded flash, RAM, timers, interrupts, serial interfaces, and analog conversion peripherals on one semiconductor device. The 8051-compatible core provides a familiar embedded-control software platform, while the C8051F01x family's mixed-signal resources reduce the need for external converters in instrumentation and industrial-control designs. Key features include 32KB of ISP flash, a 10-bit ADC with eight external inputs, programmable throughput up to 100 ksps, and two 12-bit voltage-output DACs with 10 usec settling. Two comparators and an on-chip temperature sensor expand the device's suitability for threshold detection, control loops, and temperature-aware systems. Direct memory access allows sampled ADC data to be stored in RAM without software intervention, improving control-loop responsiveness. The device is identified as an 8051 C8051F01x MCU with 25MHz operation and 32K x 8 flash organization. The verified distributor data specifically associates C8051F016 with the 48-pin TQFP, 7 x 7 mm package. The C8051F016-GQ ordering code is also listed by DigiKey, while C8051F016-GQR is listed by Mouser; these are ordering/package variants and are not treated as distinct functional alternatives here. Typical applications include industrial process monitoring, sensor acquisition, programmable control, mixed-signal instrumentation, data logging, and low-speed signal generation. For designs requiring higher conversion throughput or different analog resources, engineers should compare the complete C8051F00x/01x family and verify the selected order code, package, pinout, memory size, and peripheral map before release. A key design practice is to preserve the 8051 memory and peripheral mapping in firmware while validating the exact device variant's register definitions. Analog layout should use short, well-referenced signal paths, suitable decoupling, and controlled return currents. This page consolidates verified device facts, sourcing links, application guidance, and a conservative replacement analysis rather than treating unverified equivalents as drop-in parts.

견적 요청 문의하기
C8051F020 - 25MHz 8051 Mixed-Signal MCU | Silicon Labs
C8051F020

C8051F020 - 25MHz 8051 Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F020 is a mixed-signal 8-bit system-on-a-chip microcontroller featuring a 25 MHz 8051 core, 64 kB of Flash memory, 4.25 kB of RAM, and mixed-signal peripherals in a 100-pin TQFP package measuring 14 x 14 mm. Its principal specifications include an 8-channel, 12-bit ADC capable of 100 ksps, a 12-bit dual-channel DAC, two comparators, and five 16-bit timers, making it suitable for embedded measurement, industrial control, and analog-monitoring systems. A microcontroller is a semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The C8051F020 belongs to the hierarchy of MCU, mixed-signal microcontroller, 8-bit MCU, and embedded system-on-a-chip. Its analog and digital integration lets a compact embedded design acquire, process, and act on measured signals without requiring several separate external devices. The device provides 64 digital I/O pins, according to the manufacturer data, and combines serial communications with timer and analog resources. The 12-bit ADC includes an eight-channel multiplexer and programmable-gain stage, while the two-channel DAC provides a 12-bit output interface. Five 16-bit timers support accurate event timing, periodic events, and system timing. These resources are significant for designs requiring more than simple digital control. The C8051F020/1/2/3 family combines an 8051-compatible processing core with programmable analog peripherals and dedicated digital interfaces. At the family level, the on-board SAR ADC is described as having an eight-channel input multiplexer, programmable gain amplifier, and maximum throughput of 500 ksps. The individual C8051F020 product page specifies a 100 ksps, eight-channel, 12-bit ADC, so designers should use the device-specific value for this exact selection. Typical applications include industrial process monitoring, sensor acquisition, motor and actuator control, laboratory instrumentation, embedded data logging, and analog control systems. The device is particularly appropriate when an application needs synchronized sampling, precision timing, programmable analog gain, and a compact mixed-signal controller on the same board. When designing around the C8051F020, verify the exact package suffix, supply-voltage limits, clock configuration, analog input range, and exposed-pin assignments against the manufacturer datasheet. The base MPN C8051F020 is associated with a 100-pin TQFP in distributor listings, while ordering suffixes such as -GQ and -GQR identify specific package or shipping variants and must not be treated as interchangeable without checking ordering information. This page combines verified manufacturer specifications, distributor availability and pricing references, strict same-package replacement analysis, and practical design guidance. It is intended to provide engineering context beyond a raw parameter list, helping developers assess the C8051F020 against same-footprint family variants and redesign-level alternatives.

견적 요청 문의하기
C8051F020-GQ - 25MHz 64KB Flash MCU | Silicon Labs
C8051F020-GQ

C8051F020-GQ - 25MHz 64KB Flash MCU | Silicon Labs

The Silicon Labs C8051F020-GQ is an 8-bit mixed-signal microcontroller with a 25 MHz maximum clock, 64 KB of flash memory, and a 100-pin TQFP package measuring 14 x 14 mm. Its integrated system-on-chip design combines a 8051-compatible core, digital I/O, analog conversion, timers, serial communication, memory, and monitoring functions. A microcontroller is a programmable semiconductor device that integrates a CPU, memory, and peripherals into one device. The C8051F02x family belongs to the 8051 microcontroller hierarchy and is designed for embedded control and data-acquisition systems. The C8051F020-GQ can provide 64 digital I/O pins or 32 digital I/O pins according to its configuration, while its mixed-signal peripherals allow analog measurement and control functions to share one device. Key verified features include a 25 MHz operating frequency, 64 KB flash, and an on-chip ADC identified by distributor listings. Retrieved family data also reports two 16-bit SAR ADCs, 16-bit resolution, programmable throughput up to 1 Msps, and operation as two single-ended or one differential converter. An on-chip VDD monitor, watchdog timer, and clock oscillator reduce the amount of external support circuitry required. The device belongs to the C8051F02x mixed-signal MCU family and is positioned for industrial embedded-control, instrumentation, and data-acquisition designs. Its flash memory supports firmware storage, while the high-pin-count TQFP package exposes substantial digital and analog connectivity. The package is appropriate for conventional multilayer PCB assembly rather than a compact BGA or QFN redesign. Typical use cases include sensor acquisition, process monitoring, digital control, communications, and compact embedded instruments. The verified family description highlights two SAR ADC channels and DMA support, allowing sampled data to be transferred into RAM without requiring each byte to be handled directly by software. A critical design requirement is to verify the complete 100-pin assignment, exposed analog functions, supply limits, oscillator options, and peripheral multiplexing against the manufacturer datasheet before layout. The 100-pin package needs adequate routing space, and analog signal paths require careful grounding and decoupling to preserve measurement quality. This page consolidates verified distributor listings, manufacturer product information, package details, and practical replacement guidance. It distinguishes confirmed data from fields that still require schematic- and datasheet-level confirmation, helping engineers evaluate procurement and migration without confusing a similar MCU with a true drop-in replacement.

견적 요청 문의하기
C8051F021 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs
C8051F021

C8051F021 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs

Silicon Labs C8051F021 is a highly integrated mixed-signal 8-bit microcontroller with a powerful 25 MHz 8051-compatible core, 64 kB of Flash memory, 4.25 kB of RAM, and a 10 mm × 10 mm 64-pin QFP package. The device combines 32 digital I/O pins with a 12-bit, 8-channel, 100 ksps ADC and a 12-bit, 2-channel DAC, making it suitable for embedded control, data acquisition, and analog signal conditioning. A microcontroller integrates a processor core, memory, digital peripherals, and analog conversion functions on one semiconductor device. The C8051F021 belongs to the 8-bit microcontroller hierarchy and provides a compact platform for controlling motors, reading sensors, driving displays, and executing real-time embedded algorithms. Its mixed-signal resources reduce the need for separate ADC and DAC components when the required conversion rates and resolution are sufficient. The principal verified specifications include 25 MHz performance, 64 kB of Flash, 4.25 kB of RAM, 32 digital I/O pins, a 12-bit 8-channel ADC capable of 100 ksps, a 12-bit 2-channel DAC, two comparators, and five 16-bit timers. The manufacturer describes the device as an analog-intensive MCU with additional communication interfaces. Exact interface assignments, electrical limits, clock details, and programming requirements should be confirmed in the manufacturer datasheet before layout or firmware design. C8051F021 uses the Silicon Labs C8051F02x family architecture and is identified as a mixed-signal system-on-a-chip MCU. Its combination of Flash memory, RAM, ADC, DAC, comparators, timers, and serial communications supports compact control boards where analog measurements and control outputs share the same MCU. The QFP64 package also provides a mechanically accessible footprint for conventional through-hole assembly or leaded PCB layouts. Typical applications include industrial sensor acquisition, laboratory instrumentation, motor and actuator control, process monitoring, embedded measurement systems, and communication-enabled control nodes. The ADC can sample multiple analog inputs at up to 100 ksps, while the DAC supports two analog outputs. Firmware should configure the converter channels, establish reference and acquisition timing, and calibrate results according to the electrical characteristics in the official documentation. For PCB design, place the MCU close to its bypass capacitors and keep analog signal routing away from high-current switching nodes. Use a stable clock and decoupling arrangement, confirm all package-specific pin functions, and provide adequate power and ground connectivity. Because the verified search results do not include complete electrical, timing, pin-function, or environmental tables, those values remain marked as data needed rather than inferred.

견적 요청 문의하기
C8051F022 - 25MHz Mixed-Signal MCU | Silicon Labs
C8051F022

C8051F022 - 25MHz Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F022 is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 kB of Flash memory, 4.25 kB of RAM, and a 100-pin QFP package. Its integrated analog peripherals include a 10-bit, 8-channel, 100 ksps ADC, a 12-bit, 2-channel DAC, and two comparators. The device also provides 64 digital I/O pins, communication interfaces, and five 16-bit timers for embedded control, data acquisition, and signal-conditioning applications. A microcontroller such as the C8051F022 integrates a processor core, memory, digital I/O, timers, and analog conversion functions on one mixed-signal system-on-chip. The 8051 architecture belongs to the broader 8-bit microcontroller hierarchy and is suited to compact control systems that require deterministic peripheral integration without a separate external ADC or DAC. Its mixed-signal feature set is particularly useful when analog measurements, control outputs, and digital communications must share one device. The C8051F022 combines 25 MHz processing performance with 64 kB Flash and 4.25 kB RAM. The 10-bit ADC supports eight channels at up to 100 ksps, while the 12-bit DAC provides two channels for analog output generation. Two comparators support thresholding and basic signal decisions, and five 16-bit timers help implement timing, waveform generation, and periodic control functions. The manufacturer product page identifies the device as analog-intensive and provides the key feature selection for the C8051F02x family. The device is designed around the CIP-51 8051-compatible core, with integrated mixed-signal peripherals intended to reduce external component count. A 100-pin QFP package provides access to the device's digital and analog resources, but the high pin count also requires careful PCB routing and decoupling. Verified distributor data identifies the commercial orderable variant as C8051F022-GQ in a 100-TQFP package measuring 14 x 14 mm. Typical uses include industrial measurement and control, data-acquisition systems, analog signal generation, communications equipment, and embedded products requiring simultaneous MCU and analog-peripheral operation. The ADC can sample multiple external inputs, the DAC can produce programmable analog outputs, and the comparators can monitor thresholds without requiring separate comparator ICs. Firmware selection should account for the peripheral mix and the required I/O count rather than treating the MCU only as a general-purpose controller. For PCB implementation, place bypass capacitors close to the power pins and route sensitive analog signals away from high-current switching paths. The manufacturer documentation should be used to confirm the complete package pinout, electrical limits, programming method, and peripheral multiplexing before layout release. This page combines verified manufacturer and distributor facts with application-oriented design guidance and explicitly flags information not present in the supplied data.

견적 요청 문의하기
C8051F023 - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs
C8051F023

C8051F023 - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs

Silicon Labs C8051F023 is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 kB of Flash, 4.25 kB of RAM, and a 64-pin QFP package. It integrates a 10-bit, 8-channel, 100 ksps ADC, a 12-bit, 2-channel DAC, two comparators, five 16-bit timers, and additional communication interfaces for compact embedded control systems. A mixed-signal microcontroller combines a digital processor with analog conversion and comparison functions on one semiconductor die. The C8051F023 sits in the hierarchy MCU → mixed-signal microcontroller → 8-bit microcontroller → embedded semiconductor, providing sensor acquisition, control output, communications, and timing in one device. Its integrated analog peripherals reduce the need for separate ADC, DAC, and comparator components when board space or cost is important. Key features include the 25 MHz processor performance, 64 kB program Flash, 4.25 kB RAM, 8-channel 10-bit ADC sampling at 100 ksps, 2-channel 12-bit DAC, and two comparators. Five 16-bit timers support precise timing, periodic control, and communication tasks. The verified distributor listing identifies the device in a 64-TQFP package measuring 10 mm by 10 mm. The device architecture combines the established 8051 instruction set with analog-intensive peripherals in a mixed-signal system-on-chip design. The ADC and DAC provide conversion functions directly in the control loop, while comparators can support threshold detection and signal monitoring. The package provides 64 digital I/O pins according to the verified C8051F02x datasheet snippet, although exact pin assignments and package details should be confirmed against the manufacturer documentation. Typical uses include industrial measurement and control, data acquisition, sensor-interface systems, analog signal conditioning, and compact embedded instruments. The 100 ksps ADC is suitable for many low-to-moderate-bandwidth acquisition tasks, while the DAC supports programmable analog output in test equipment and control systems. A key design consideration is analog signal integrity. Place ADC inputs, DAC outputs, reference connections, and power pins according to the manufacturer layout guidance, keeping high-current switching paths away from sensitive analog traces and providing appropriate decoupling. The verified web data does not provide complete pinout, operating-temperature, supply-voltage, lifecycle, or compliance values, so those details require confirmation before production release.

견적 요청 문의하기
C8051F126 - 50MHz 8051 MCU, 128KB Flash, 100-TQFP | Silicon Labs
C8051F126

C8051F126 - 50MHz 8051 MCU, 128KB Flash, 100-TQFP | Silicon Labs

The Silicon Labs C8051F126 is a highly integrated mixed-signal 8-bit microcontroller (MCU) featuring a high-performance 8051 core running at 50 MHz peak instruction throughput. This analog-intensive MCU integrates a 10-bit, 8-channel, 100 ksps successive-approximation ADC, a 12-bit, 2-channel DAC, and two on-chip comparators, making it well-suited to closed-loop control and precision sensing applications. The device ships with 128 kB of in-system programmable Flash and 8 kB of RAM, plus five 16-bit timers and multiple serial interfaces, all housed in a 14x14 mm, 100-pin TQFP package. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path; it is widely used for embedded control tasks where deterministic real-time behavior, low power, and rich analog/mixed-signal integration outweigh the need for high-end DSP or MPU performance. The C8051F126 belongs to the mixed-signal MCU category, which extends a baseline 8051 core with precision analog peripherals - placing it in the hierarchy: 8051 core -> 8-bit MCU -> mixed-signal MCU -> microcontroller -> embedded processor -> semiconductor. Key features include the 50 MHz pipelined 8051-compatible core delivering up to 50 MIPS, a true 12-bit (or 10-bit mode) ADC with programmable amplifier gain of 0.5/1/2/4/8/16, two 12-bit DACs, and an internal 2% accurate 24.5 MHz oscillator that can drive the system clock without an external crystal. The part supports up to 64 digital I/O pins (the lower pin-count 64-pin package variants expose 32), tolerates 2.7 V to 3.6 V supply, and operates across the -40 C to +85 C industrial temperature range. Typical applications include industrial process control, optical networking modules, point-of-sale terminals, motor control, smart sensors, and portable instrumentation. The wide operating voltage and rich analog integration allow direct interfacing with sensors, bridge circuits, and actuators without a separate analog front-end IC. When designing with this device, ensure the decoupling network follows the datasheet's recommended 1 nF plus bulk capacitor arrangement and that JTAG/programming pins are reserved for in-system programming. Boundary-scan is not supported - functional test coverage must be designed in.

견적 요청 문의하기
C8051F126-GQR - 50MHz 8051 MCU, 128KB Flash, 100-TQFP | Silicon Labs
C8051F126-GQR

C8051F126-GQR - 50MHz 8051 MCU, 128KB Flash, 100-TQFP | Silicon Labs

The Silicon Labs C8051F126-GQR is a highly integrated mixed-signal 8-bit microcontroller built on the legacy 8051 core, delivering 50 MHz (100 MIPS peak) performance in a 100-pin TQFP (14x14 mm) package. It integrates 128 KB of in-system programmable flash, 8.25 KB RAM, a 10-bit 8-channel 100 ksps ADC, two 12-bit DACs, two comparators, and 64 digital I/O pins, making it a true System-on-a-Chip for embedded analog and control designs. What is a mixed-signal 8051 microcontroller? An 8051 MCU is a single-chip computer based on Intel's classic MCS-51 instruction set, extended over decades with on-chip peripherals, flash, and RAM. Mixed-signal devices add analog peripherals (ADC, DAC, comparators, voltage reference) directly to the digital core, eliminating the need for external converters and shrinking BOM cost. The C8051F126 sits in the broader hierarchy: 8-bit MCU -> 8051 family -> mixed-signal SoC -> embedded controller. It is commonly used as a step-up from discrete analog signal conditioning plus external ADC designs in industrial and instrumentation applications. Compared with a Cortex-M0/M3 device, an 8051 core is slower code-favored only for low-cost portability; the F126's value comes from analog silicon density. Key features include a pipelined 8051 core that executes 70% of instructions in 1-2 system clocks, a 2-cycle 16x16 MAC engine for DSP-style math, programmable gain amplifier (PGA) gain settings of 0.5/1/2/4/8/16 on the ADC inputs, and a data-dependent windowed interrupt for adaptive sampling. Communication interfaces typically span two UARTs, an SMBus-compatible I2C bus, and an SPI bus for external peripherals and controllers. The -GQR suffix indicates a lead-free, RoHS-compliant 100-pin TQFP reel-packaged grade. The original device's supply range is 2.7 V to 3.6 V, and the operating range is -40 C to +85 C. The C8051F2 architecture centers on an analog-friendly pipeline, an on-chip 2.2 V reference, and programmable throughput. The optional on-chip PLL supports up to 480 MHz - higher throughput without speed loss. A 2-cycle 16x16 MAC engine accelerates DSP-style math. These specifications highlight durability for high-throughput DSP-style industrial control. Typical applications span precision data acquisition, process control loops, motor control feedback, optical networking modules, instrumentation front-ends, and embedded control systems. The 64 I/O plus device pins and memory density also enable mid-tier designs with adequate peripheral headroom. When designing with this device, ensure adequate decoupling at the supply pin (10uF bulk) per the digital core. The original code's flash legacy ensures portable migration from discrete silicon designs.

견적 요청 문의하기