AD621AR vs AD621ARZ 비교
다음의 상세 나란히 비교: AD621AR 제조: Analog Devices 및 AD621ARZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD621AR | AD621ARZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Single-channel instrumentation amplifier | — |
| Manufacturer | Analog Devices | — |
| 패키지 | 8-SOIC | 8-pin SOIC |
| Number of Circuits | 1 circuit | — |
| Architecture | Integrated three-op-amp instrumentation-amplifier architecture | — |
| Power Class | Low power | — |
| Drift Class | Low drift | — |
| Accuracy Class | High accuracy | — |
| 공급 전압 | ±18 V maximum | — |
| Gain Range | 10 to 10,000 | [DATA_NEEDED: gain range] |
| Gain Error | [DATA_NEEDED: maximum gain error] | [DATA_NEEDED: gain error] |
| Gain Drift | [DATA_NEEDED: maximum gain drift] | [DATA_NEEDED: gain drift] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 500 pA |
| Common-Mode Rejection Ratio | [DATA_NEEDED: minimum common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Small-Signal Bandwidth | [DATA_NEEDED: gain-dependent bandwidth] | 800 kHz |
| Slew Rate | [DATA_NEEDED: slew rate] | 1.2 V/us |
| 공급 전류 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Amplifier Type | — | Single-channel instrumentation amplifier |
| Number of Channels | — | 1 circuit |
| Output Offset Voltage | — | 75 uV |
| Supply Voltage Range | — | Up to +/-18 V |
| 실장 유형 | — | Surface mount |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| 출력 전압 범위 | — | [DATA_NEEDED: output voltage range] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Input Noise Current | — | [DATA_NEEDED: input noise current] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |