AD622AN vs AD620ANZ 비교
다음의 상세 나란히 비교: AD622AN 제조: Analog Devices 및 AD620ANZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
AD620ANZ - 1-Channel Low-Power Instrumentation Amplifier | Analog Devices
AD620ANZ Unknown사양 비교
| 파라미터 | AD622AN | AD620ANZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | Unknown |
| Product Type | Instrumentation amplifier | Low-cost, low-power, high-accuracy instrumentation amplifier |
| Gain Range Without External Resistor | 1 | — |
| Gain Range With External Resistor | 2 to 1000 | — |
| External Gain-Setting Resistors | 1 resistor | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | 110 dB |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| 출력 전압 범위 | [DATA_NEEDED: output voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | 2 nA |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Linearity | [DATA_NEEDED: linearity specification] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 패키지 | [DATA_NEEDED: AD622AN package dimensions and pin count] | 8-lead PDIP |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance] | unknown |
| Number of Channels | — | 1 channel |
| Gain Range | — | 1 to 10,000 |
| External Gain Setting | — | One external resistor |
| Gain-Bandwidth Product | — | 1 MHz |
| Maximum Supply Current | — | 1.3 mA |
| 공급 전압 | — | [DATA_NEEDED: supply voltage range] |
| Input Noise | — | [DATA_NEEDED: input noise] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Package Family | — | PDIP family, through-hole DIP |
| 실장 유형 | — | Through-hole |
| AEC-Q100 Qualification | — | not_applicable |
| Applications | — | Precision data acquisition, sensor conditioning, portable instrumentation |