AD676JN vs AD676KD 비교
다음의 상세 나란히 비교: AD676JN 제조: Analog Devices 및 AD676KD 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD676JN | AD676KD |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 최종 구매 | Unknown |
| Number of Bits | 16 | — |
| 샘플링 속도 | 100 kSPS | — |
| Conversion Time | 10 us | — |
| Architecture | SAR (Successive Approximation Register) | — |
| Input Channels | 1 single-ended | — |
| Data Interface | Parallel (16-bit) | — |
| Input Type | Single-Ended, unipolar or bipolar (pin-strapped) | — |
| Integral Nonlinearity (INL) | 1 LSB max (no missing codes) | — |
| Total Harmonic Distortion (THD) | -97 dB | — |
| Signal-to-Noise Ratio (SNR) | 90 dB | — |
| 패키지 | 28-pin PDIP (Plastic DIP, 0.600 inch / 15.24 mm) | 28-pin ceramic DIP (28-CDIP) |
| 동작 온도 | 0 C to +70 C | — |
| 실장 유형 | Through-Hole (DIP) | Through-hole |
| Packaging | Tube | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Autocalibration | On-chip, automatic on power-up and on CAL command | On-chip autocalibration |
| Sample-and-Hold | On-chip | — |
| Device Type | — | 16-bit parallel-output analog-to-digital converter |
| Converter Architecture | — | Switched-capacitor charge-redistribution SAR |
| 분해능 | — | 16 bit |
| Number of Analog Inputs | — | 1 input |
| Conversion Rate | — | 100 kSPS |
| Total Conversion Time | — | 10 microseconds |
| Output Format | — | Parallel output |
| On-Chip Sample-and-Hold | — | Yes |
| Missing Codes | — | No missing codes |
| Integral Nonlinearity | — | 1 LSB typical |
| Total Harmonic Distortion | — | 97 dB |
| Signal-to-Noise Plus Distortion | — | 90 dB |
| Full-Power Bandwidth | — | 1 MHz |
| Temperature Grade | — | Commercial |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |