AD677AD vs AD677BD 비교
다음의 상세 나란히 비교: AD677AD 제조: Analog Devices 및 AD677BD 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD677AD | AD677BD |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 최종 구매 | 최종 구매 |
| 분해능 | 16 bit | 16 bit |
| 샘플링 속도 | 100 kSPS | 100 kSPS |
| Total Conversion Time | 10 us | 10 µs |
| Input Count | 1 analog input | 1 analog input |
| ADC Architecture | Successive-approximation-register (SAR) | — |
| Internal Architecture | Switched-capacitor charge redistribution | — |
| 출력 유형 | Serial | Serial |
| Calibration | On-chip autocalibration with digital nonlinearity correction | — |
| 패키지 | 16-lead ceramic DIP (CDIP) | 16-pin ceramic DIP |
| 실장 유형 | Through-hole | Through-hole |
| 입력 전압 범위 | [DATA_NEEDED: Input voltage range] | [DATA_NEEDED: AD677BD input voltage range] |
| 기준 전압 | [DATA_NEEDED: External reference voltage] | — |
| Analog Input Type | [DATA_NEEDED: Unipolar or bipolar input configuration] | — |
| Integral Nonlinearity | [DATA_NEEDED: Integral nonlinearity] | [DATA_NEEDED: AD677BD integral nonlinearity] |
| SNR | [DATA_NEEDED: Signal-to-noise ratio] | [DATA_NEEDED: AD677BD signal-to-noise ratio] |
| Effective Number of Bits | [DATA_NEEDED: Effective number of bits] | — |
| Input Impedance | [DATA_NEEDED: Input impedance] | — |
| Input Sampling Capacitance | [DATA_NEEDED: Input sampling capacitance] | — |
| Digital Interface Levels | [DATA_NEEDED: Digital logic input and output levels] | — |
| Serial Clock Frequency | [DATA_NEEDED: Maximum serial clock frequency] | — |
| 동작 온도 범위 | [DATA_NEEDED: Operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: Supply voltage range] | — |
| Power Consumption | [DATA_NEEDED: Typical and maximum power consumption] | — |
| Package Dimensions | [DATA_NEEDED: Ceramic DIP package dimensions] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: AD677BD RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: Lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Converter Type | — | 16-bit sampling ADC |
| Architecture | — | Switched-capacitor charge-redistribution SAR |
| Analog Supply | — | +5 V and ±12 V |
| Digital Supply | — | Separate 5 V digital supply |
| Typical Power Consumption | — | 450 mW during conversion with 10 V reference |
| Typical Power Consumption with 5 V Reference | — | 360 mW during conversion |
| On-Chip Calibration | — | Digital autocalibration corrects internal nonlinearities |
| Lead Pitch | — | 2.54 mm |
| Package Width | — | 7.62 mm |
| Analog Devices Family Temperature Range | — | 0 °C to +70 °C commercial or -40 °C to +85 °C industrial |
| Reference Voltage Range | — | [DATA_NEEDED: AD677BD reference voltage range] |
| ENOB | — | [DATA_NEEDED: AD677BD effective number of bits] |