AD677KR vs AD677JR 비교
다음의 상세 나란히 비교: AD677KR 제조: Analog Devices 및 AD677JR 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD677KR | AD677JR |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 최종 구매 | 최종 구매 |
| 분해능 | 16 bit | 16 bit |
| 샘플링 속도 | 100 kSPS | 100 kSPS |
| Total Conversion Time | 10 us | — |
| Architecture | Switched-capacitor/charge-redistribution SAR | SAR ADC with switched-capacitor charge redistribution |
| Input Count | 1 input | — |
| 출력 유형 | Serial, 16 bit | — |
| Sample-and-Hold | On-chip | — |
| Autocalibration | Supported | — |
| No Missing Codes | 16 bit, no missing codes | — |
| Signal-to-Noise and Distortion Ratio | 92 dB | — |
| Total Harmonic Distortion | 99 dB | 92 dB |
| Full-Power Bandwidth | 1 MHz | 1 MHz |
| 패키지 | 28-lead SOIC | 28-lead SOIC |
| 실장 유형 | Surface mount | Surface mount |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| 입력 전압 범위 | [DATA_NEEDED: analog input voltage range] | — |
| 기준 전압 | [DATA_NEEDED: reference voltage] | — |
| Analog Input Type | Single-ended/unipolar input | — |
| Power Consumption | [DATA_NEEDED: power consumption] | 450 mW typical with a 10 V reference; 360 mW typical with a 5 V reference during conversion |
| Digital Interface | Serial output | — |
| RoHS 상태 | unknown | [DATA_NEEDED: RoHS compliance status] |
| Conversion Time | — | 10 us |
| Number of Input Channels | — | 1 channel |
| Input Type | — | Single-ended analog input |
| Output Interface | — | Serial, 16 bit |
| Signal-to-Noise Ratio | — | 99 dB |
| Missing Codes | — | No missing codes |
| Sample-and-Hold Function | — | Autocalibrating on-chip sample-and-hold |
| Analog Supply Voltage | — | +5 V and ±12 V |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Reference Voltage Range | — | [DATA_NEEDED: reference voltage range] |
| Analog Input Voltage Range | — | [DATA_NEEDED: analog input voltage range] |