AD711TH vs AD712AH 비교
다음의 상세 나란히 비교: AD711TH 제조: Analog Devices 및 AD712AH 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD711TH | AD712AH |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | Unknown | 활성 |
| Product Type | Single-circuit precision operational amplifier | — |
| Amplifier Architecture | BiFET operational amplifier | — |
| Input Stage | JFET input | — |
| Gain-Bandwidth Product | 4 MHz | — |
| Maximum Input Offset Voltage | 500 uV | — |
| Number of Circuits | 1 circuit | — |
| Package Type | TO-99-8 hermetically sealed metal can | — |
| Package Designation | MBCY8 | — |
| 핀 수 | 8 pins | — |
| 실장 유형 | Through-hole | Through-hole |
| Offset Adjustment | Laser wafer trimming | — |
| Input Offset Voltage Drift | [DATA_NEEDED: input offset voltage drift] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: supply voltage range] |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | [DATA_NEEDED: open-loop gain] |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Number of Channels | — | 2 |
| Amplifier Type | — | Precision BiFET operational amplifier |
| Maximum Offset Voltage | — | 2000 uV |
| Bandwidth | — | 4 MHz |
| Architecture | — | Monolithic |
| Input Transistor Type | — | BiFET |
| Offset Adjustment Method | — | Laser wafer trimming |
| 패키지 | — | 8-pin TO-99 metal can |
| 핀 수 | — | 8 pins |
| Product Description | — | High-speed, precision monolithic dual operational amplifier |
| Input Offset Current | — | [DATA_NEEDED: input offset current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |