AD7482AST vs AD7482BST 비교
다음의 상세 나란히 비교: AD7482AST 제조: Analog Devices 및 AD7482BST 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD7482AST | AD7482BST |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 활성 | 활성 |
| ADC Type | Successive-approximation ADC | — |
| 분해능 | 12 bit | 12 bit |
| Maximum Throughput Rate | 3 MSPS | 3 MSPS |
| Input Channels | 1 channel | — |
| Input Bandwidth | 40 MHz | — |
| 공급 전압 | 5 V maximum single supply | [DATA_NEEDED: supply voltage] |
| On-Board Reference | 2.5 V | — |
| Nominal Analog Input Range | 0 V to 2.5 V | — |
| Offset Shift Range | plus or minus 200 mV | — |
| Full-Power Consumption | 90 mW | — |
| Nap Mode Consumption | 2.5 mW | — |
| Standby Current | 2 A maximum | — |
| 인터페이스 | Parallel | — |
| Interface Modes | 2 parallel interface modes | — |
| Pipeline Delay | None | — |
| 패키지 | 48-pin LQFP | 48-lead LQFP |
| Package Dimensions | 7 mm x 7 mm | — |
| 실장 유형 | Surface mount | Surface mount |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Differential Nonlinearity | [DATA_NEEDED: differential nonlinearity] | — |
| Integral Nonlinearity | [DATA_NEEDED: integral nonlinearity] | — |
| Conversion Type | — | Successive approximation register (SAR) |
| Analog Input Bandwidth | — | Above 40 MHz |
| 인터페이스 유형 | — | Parallel |
| Analog Input Channels | — | 1 channel |
| Track-and-Hold Circuit | — | On-chip, low-noise, wide-bandwidth |
| Analog Input Voltage Range | — | [DATA_NEEDED: analog input voltage range] |
| 기준 전압 | — | [DATA_NEEDED: reference voltage] |
| Input Type | — | [DATA_NEEDED: input type] |
| Package Body Size | — | 7 mm x 7 mm |
| Power Consumption | — | [DATA_NEEDED: power consumption] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |