AD7482BST vs AD7482AST 비교
다음의 상세 나란히 비교: AD7482BST 제조: Analog Devices 및 AD7482AST 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD7482BST | AD7482AST |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 활성 | 활성 |
| 분해능 | 12 bit | 12 bit |
| Conversion Type | Successive approximation register (SAR) | — |
| Maximum Throughput Rate | 3 MSPS | 3 MSPS |
| Analog Input Bandwidth | Above 40 MHz | — |
| 인터페이스 유형 | Parallel | — |
| Analog Input Channels | 1 channel | — |
| Track-and-Hold Circuit | On-chip, low-noise, wide-bandwidth | — |
| 공급 전압 | [DATA_NEEDED: supply voltage] | 5 V maximum single supply |
| Analog Input Voltage Range | [DATA_NEEDED: analog input voltage range] | — |
| 기준 전압 | [DATA_NEEDED: reference voltage] | — |
| Input Type | [DATA_NEEDED: input type] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 패키지 | 48-lead LQFP | 48-pin LQFP |
| Package Body Size | 7 mm x 7 mm | — |
| 실장 유형 | Surface mount | Surface mount |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| ADC Type | — | Successive-approximation ADC |
| Input Channels | — | 1 channel |
| Input Bandwidth | — | 40 MHz |
| On-Board Reference | — | 2.5 V |
| Nominal Analog Input Range | — | 0 V to 2.5 V |
| Offset Shift Range | — | plus or minus 200 mV |
| Full-Power Consumption | — | 90 mW |
| Nap Mode Consumption | — | 2.5 mW |
| Standby Current | — | 2 A maximum |
| 인터페이스 | — | Parallel |
| Interface Modes | — | 2 parallel interface modes |
| Pipeline Delay | — | None |
| Package Dimensions | — | 7 mm x 7 mm |
| Differential Nonlinearity | — | [DATA_NEEDED: differential nonlinearity] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |