AD7686BCPZ-R2 vs AD7685CCPZ-R2 비교
다음의 상세 나란히 비교: AD7686BCPZ-R2 제조: Analog Devices 및 AD7685CCPZ-R2 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
AD7685CCPZ-R2 - 16-Bit 250 kSPS SAR ADC | Analog Devices | LFCSP-10
AD7685CCPZ-R2 ✓ 활성사양 비교
| 파라미터 | AD7686BCPZ-R2 | AD7685CCPZ-R2 |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $6.80 | $4.20 |
| 분해능 | 16 bit | 16 Bit |
| Number of Sample Points | [DATA_NEEDED: number_of_inputs] | — |
| 샘플링 속도 | 500 kSPS | 250 kSPS |
| Architecture | SAR (Successive Approximation) | SAR (Successive Approximation Register) |
| Input Type | Single-Ended, Pseudo-Differential | Differential (Pseudo) |
| Number of Channels | 1 | 1 |
| Supply Voltage VDD | 4.5 V to 5.5 V | — |
| Logic Interface Voltage VIO | 2.3 V to 5.5 V | — |
| 기준 전압 | 2.5 V internal (typical) or external | — |
| Power Consumption | [DATA_NEEDED: power_consumption_active_value] | — |
| Power Consumption (Full Power Down) | [DATA_NEEDED: power_down_value] | — |
| 동작 온도 범위 | -40 °C to +85 °C | -40C to +85C [DATA_NEEDED: full industrial range from datasheet] |
| 패키지 | 10-LFCSP-WD (3x3 mm) with exposed pad | 10-LFCSP-WD (3x3) with exposed pad |
| 실장 유형 | Surface Mount | Surface Mount |
| 인터페이스 | SPI, QSPI, MICROWIRE, DSP-compatible serial | — |
| INL (Max) | [DATA_NEEDED: inl_max] | — |
| SNR (typical) | [DATA_NEEDED: snr_typical] | [DATA_NEEDED: SNR in dB] |
| ESD Rating (HBM) | [DATA_NEEDED: esd_hbm] | — |
| RoHS 상태 | Compliant | Compliant |
| MSL 레벨 | [DATA_NEEDED: msl_level] | — |
| Supply Voltage (VDD) | — | 2.3 V to 5.5 V |
| Digital Interface | — | SPI / QSPI / MICROWIRE / DSP compatible |
| Power Dissipation (typical at 250 kSPS, 5 V) | — | 4 mW [DATA_NEEDED: confirm from datasheet] |
| No Missing Codes | — | 16-bit guaranteed |
| Internal Conversion Clock | — | Yes |
| Input Bandwidth | — | [DATA_NEEDED: small-signal bandwidth] |
| INL (typical) | — | [DATA_NEEDED: max INL in LSB] |