AD8251ARMZ-R7 vs AD8251ARMZ 비교
다음의 상세 나란히 비교: AD8251ARMZ-R7 제조: Analog Devices 및 AD8251ARMZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD8251ARMZ-R7 | AD8251ARMZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.71 | $9.05 |
| Part Number | AD8251ARMZ-R7 | — |
| Manufacturer | Analog Devices Inc. | — |
| 기능 | Instrumentation Amplifier | — |
| Number of Channels | 1 | — |
| Programmable Gains | G = 1, 2, 4, 8 | — |
| Bandwidth (Small-Signal, -3 dB) | 10 MHz | — |
| Slew Rate | 20 V/μs | 20 V/µs (minimum) |
| Settling Time to 0.001% | 785 ns (max) | — |
| Total Harmonic Distortion (THD) | -110 dB | -110 dB |
| Input Impedance | GΩ | GΩ |
| Input Bias Current (max) | 50 pA | — |
| Offset Voltage Drift (typ) | 1 μV/°C | — |
| Supply Voltage Range | ±5 V to ±15 V (dual) / +5 V to +30 V (single-equivalent) | ±5 V to ±15 V |
| Quiescent Supply Current (typ) | 4.5 mA | — |
| Input Overvoltage Protection | ±40 V (continuous) | — |
| 동작 온도 범위 | -40°C to +85°C | -40°C to +85°C |
| 패키지 | 10-pin MSOP (RM) | 10-lead MSOP |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL (Moisture Sensitivity Level) | 1 (unlimited) | — |
| Lead-Free / RoHS | Yes / Compliant | — |
| Gain-Selection Interface | 2-bit parallel CMOS logic (A0, A1) | — |
| Process Technology | iCMOS™ | — |
| Amplifier Type | — | Instrumentation Amplifier |
| Number of Circuits | — | 1 |
| Programmable Gain Values | — | 1, 2, 4, 8 |
| Gain Setting Method | — | Digital (parallel logic) or transparent gain-pin |
| Settling Time (0.001%) | — | 785 ns (maximum) |
| Bandwidth (-3 dB) | — | 10 MHz |
| CMRR (G=8, DC) | — | 98 dB (minimum) |
| Gain Drift | — | 10 ppm/°C (maximum) |
| Offset Drift (G=8) | — | 1.8 µV/°C (maximum) |
| Quiescent Current (typical) | — | [DATA_NEEDED: quiescent current value] |
| MSL 레벨 | — | 1 (unlimited) |
| RoHS 상태 | — | Compliant |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED] |