ADC0809CCN vs MM74C949N 비교

다음의 상세 나란히 비교: ADC0809CCN 제조: Texas Instruments 및 MM74C949N 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
ADC0809CCN ADC0809CCN - 8-Bit 8-Channel SAR ADC | 10kSPS | 28-DIP

ADC0809CCN - 8-Bit 8-Channel SAR ADC | 10kSPS | 28-DIP

ADC0809CCN ✓ 활성

사양 비교

파라미터 ADC0809CCN MM74C949N
브랜드 Texas Instruments Texas Instruments
카테고리 ADC/DAC ADC/DAC
수명 주기 상태 활성 Obsolete
재고 상태 In Stock In Stock
단가 (USD) $3.40 $3.65
분해능 8 bits 8 bits
Architecture Successive Approximation (SAR) —
Number of Channels 8 single-ended —
Sample Rate (max) 10 kSPS —
Input Type Single-Ended, Multiplexed —
Supply Voltage (VCC) 4.5 V to 5.25 V (5 V typical) —
공급 전류 [DATA_NEEDED: typical quiescent current] —
Analog Input Voltage Range 0 V to VCC —
Integral Nonlinearity (INL) ±1 LSB max —
Differential Nonlinearity (DNL) ±1 LSB max (no missing codes) —
Conversion Time (typ) [DATA_NEEDED: at fCLK] —
Clock Frequency 10 kHz to 1.1 MHz —
기준 전압 Internal 256R ladder, VREF+ / VREF- pins —
Digital I/O Logic Level TTL/CMOS compatible —
동작 온도 -40 °C to +85 °C —
패키지 28-pin PDIP (through-hole) 28-PDIP (Plastic DIP, 28-pin)
실장 유형 Through-Hole (DIP) Through-Hole (DIP)
RoHS 상태 Compliant (NOPB variant); non-compliant legacy [DATA_NEEDED: RoHS status - legacy part predates RoHS directive; check distributor listings]
Output Interface 8-bit parallel, tri-state latched —
Channel Selection 3-bit address latch (A0/A1/A2) —
Number of Input Channels — 8 (single-ended, multiplexed)
Conversion Architecture — Successive Approximation (SAR)
Conversion Time — 116 microseconds (typical)
공급 전압 — 5 V (single supply)
Analog Input Type — Single-ended, 8-channel MUX
Digital Interface — 8-bit microprocessor-compatible, tri-state outputs
동작 온도 범위 — -40 C to +85 C
Output Code — Binary (unipolar)
Technology — CMOS
Sample-and-Hold — Internal
Reference — Internal (external reference option [DATA_NEEDED: pin details])
핀 수 — 28
수명 주기 상태 — Obsolete / End of Life (per GlobalSpec listing)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청