ADM203JN vs MAX232D 비교
다음의 상세 나란히 비교: ADM203JN 제조: Analog Devices 및 MAX232D 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ADM203JN | MAX232D |
|---|---|---|
| 브랜드 | Analog Devices | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $4.53 | $0.62 |
| Product Type | High-speed CMOS RS-232 driver/receiver | — |
| 공급 전압 | 5 V | — |
| Transmission Rate | 120 kB/s | — |
| Driver Count | 2 | — |
| Receiver Count | 2 | — |
| Interface Standard | EIA-232-E and V.28 | — |
| External Charge-Pump Capacitors | Not required for ADM203 | — |
| DC-DC Converter | Onboard | — |
| Nominal DC-DC Output | 9 V | — |
| Logic Supply Type | Single 5 V supply | — |
| 패키지 | DIP-20 | SOIC-16 (D) |
| Terminal Count | 20 | — |
| 실장 유형 | Through-hole | Surface Mount |
| Temperature Grade | Commercial | — |
| Cable Length Support | Extended cable lengths supported by high-drive-current outputs | — |
| Document Page Count | 6 pages | — |
| Datasheet File Size | 120 kB | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Operating Voltage Tolerance | [DATA_NEEDED: operating voltage tolerance] | — |
| Output Voltage Levels | [DATA_NEEDED: RS-232 output voltage levels] | — |
| Receiver Input Range | [DATA_NEEDED: receiver input voltage range] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict Minerals Status | [DATA_NEEDED: conflict-minerals status] | — |
| 기능 | — | Dual RS-232 line driver/receiver (2/2 transceiver, full) |
| 데이터 속도 | — | 120 kbps |
| Supply Voltage (Vcc) | — | 4.5 V to 5.5 V |
| 공급 전류 | — | 8 mA typical |
| Receiver Input Levels | — | +/-30 V tolerant |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Charge Pump Capacitors Required | — | 4 external (typically 1 uF) |
| Generated RS-232 Rails | — | Approx. +/-9 V to +/-10 V from internal charge pump |
| Compliance | — | TIA/EIA-232-F, ITU V.28 |
| ESD Protection (RS-232 pins) | — | [DATA_NEEDED: datasheet ESD figure] |
| 동작 온도 | — | 0 C to +70 C (commercial grade) |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED: halogen-free] |
| Interchangeable With | — | Maxim MAX232 (industry-standard die) |