ADM207AR vs ADM202EARN 비교
다음의 상세 나란히 비교: ADM207AR 제조: Analog Devices 및 ADM202EARN 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ADM207AR | ADM202EARN |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | RS-232 transceiver | Dual RS-232 line driver/receiver transceiver |
| 공급 전압 | +5 V | 5 V |
| Driver Count | 5 | — |
| Receiver Count | 3 | — |
| 데이터 속도 | 200 kb/s | — |
| Charge-Pump Capacitor Value | 0.1 µF | 0.1 µF each |
| Output Swing | 9 V | — |
| Low Power | 15 mW | — |
| Receiver Input Level | 30 V | — |
| Interface Standard | EIA-232-E and V.28 | TIA/EIA-232-E and V.28 |
| Power-Supply Requirement | Single +5 V | — |
| 패키지 | 24-pin SOIC | 16-pin SOIC |
| 실장 유형 | Surface mount | Surface mount |
| Transceiver Configuration | 5 transmitters and 3 receivers | — |
| Shutdown Feature | Low-power shutdown | — |
| Latch-Up Protection | Latch-up free | — |
| Compatibility | Plug-in upgrade for MAX205-211/213 | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Driver Output Voltage | [DATA_NEEDED: minimum and maximum driver output voltage] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Number of Channels | — | 2 channels |
| Number of Drivers | — | 2 drivers |
| Number of Receivers | — | 2 receivers |
| Maximum Data Rate | — | 230 kbit/s |
| RS-232 Output Level | — | ±10 V |
| External Charge-Pump Capacitor Count | — | 4 capacitors |
| ESD Protection | — | ±15 kV human body model |
| Contact Discharge ESD Protection | — | 8 kV |
| Air-Gap Discharge ESD Protection | — | 15 kV |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Driver Slew Rate | — | [DATA_NEEDED: driver slew rate] |