ADM208AN vs MAX211CDB 비교
다음의 상세 나란히 비교: ADM208AN 제조: Analog Devices 및 MAX211CDB 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ADM208AN | MAX211CDB |
|---|---|---|
| 브랜드 | Analog Devices | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.00 | $3.23 |
| Product Type | RS-232 transceiver | Multichannel RS-232 line driver/receiver |
| Driver Count | 4 | 4 |
| Receiver Count | 4 | 5 |
| 공급 전압 | +5 V | 5 V |
| 데이터 속도 | 120 kbit/s | — |
| Charge-Pump Capacitor | 0.1 µF | — |
| Output Swing | 9 V with +5 V supply | — |
| Receiver Input Levels | 30 V | — |
| Low Power | 15 mW | — |
| Power Shutdown | Low-power shutdown feature listed for the ADM2xx family | — |
| Interface Standard | EIA-232-E and V.28 | — |
| 패키지 | 24-pin PDIP | 28-pin SSOP, 5.30 mm width |
| 실장 유형 | Through-hole | Surface mount |
| Technology | CMOS | — |
| 동작 온도 | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Maximum Data Rate | — | 120 kbit/s |
| Driver Output Swing | — | ±9 V |
| RS-232 Bus Pin ESD Protection | — | ±15 kV, human-body model |
| Standards Support | — | TIA/EIA-232-F and ITU V.28 |
| Shutdown Feature | — | Three driver outputs can be placed in shutdown |
| Power-Supply Topology | — | Single 5 V supply with integrated charge-pump circuitry |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | — | [DATA_NEEDED: operating supply current] |
| Shutdown Supply Current | — | Low; exact value [DATA_NEEDED: shutdown supply current] |
| Driver Input Logic Levels | — | [DATA_NEEDED: driver input logic thresholds] |
| Receiver Output Logic Levels | — | [DATA_NEEDED: receiver output logic levels] |