ADM230LJR vs MAX3070EESD+ 비교
다음의 상세 나란히 비교: ADM230LJR 제조: Analog Devices 및 MAX3070EESD+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ADM230LJR | MAX3070EESD+ |
|---|---|---|
| 브랜드 | Analog Devices | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | CMOS RS-232 driver/receiver | RS-485/RS-422 transceiver |
| 공급 전압 | +5 V | 3.3 V |
| Number of Drivers | 1 | 1 driver |
| Number of Receivers | 1 | 1 receiver |
| 데이터 속도 | 120 kB/s | — |
| Interface Standard | EIA-232-E and V.28 | — |
| Onboard Converter | DC-DC converter | — |
| RS-232 Output Swing | 9 V | — |
| Recommended Capacitor | 1 uF | — |
| Shutdown Function | Low-power shutdown | — |
| Receiver State in Shutdown | Active | — |
| Receiver Input Voltage Rating | 30 V | — |
| 패키지 | 16-lead SOIC, 0.154 inch body width | 14-pin SOIC |
| 실장 유형 | Surface mount | Surface mount |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | -40°C to 85°C |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supported Standards | — | RS-485 and RS-422 |
| ESD Protection | — | ±15 kV |
| Fail-Safe Receiver | — | Logic-high output when receiver inputs are open or shorted |
| Hot-Swap Capability | — | Supported |
| 수명 주기 상태 | — | Active |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| 공급 전류 | — | [DATA_NEEDED: operating supply current] |