ADM232LJN vs ADM232LJNZ 비교
다음의 상세 나란히 비교: ADM232LJN 제조: Analog Devices 및 ADM232LJNZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ADM232LJN | ADM232LJNZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | Obsolete | 활성 |
| Product Type | RS-232 transceiver | — |
| Transmitter and Receiver Configuration | 2 transmitters and 2 receivers | — |
| 공급 전압 | 5 V | — |
| 데이터 속도 | 120 kB/s | — |
| Supported Standards | EIA-232-E and V.28 | — |
| RS-232 Output Swing | Approximately ±9 V from a 5 V supply | — |
| On-Board DC-DC Converters | Yes | — |
| Required Charge-Pump Capacitors | 1 µF | — |
| Low-Power Shutdown | Yes | — |
| Receivers Active in Shutdown | Yes | — |
| Maximum Receiver Input Voltage | 30 V | — |
| 패키지 | 16-pin PDIP | 16-pin PDIP |
| 실장 유형 | Through-hole | Through-hole |
| 동작 온도 | 0°C to 70°C | — |
| 수명 주기 상태 | Obsolete | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Device Type | — | RS-232 transceiver |
| Driver and Receiver Configuration | — | 2 drivers and 2 receivers |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Logic Technology | — | 5 V CMOS |
| Maximum Data Rate | — | 100 kbps |
| Interface Standard | — | RS-232 |
| Supported Signaling Standards | — | EIA-232-E and V.28 |
| 핀 수 | — | 16 pins |
| Production Status | — | Production |
| Negative Supply Requirement | — | Not required at the device interface |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| External Charge-Pump Capacitors | — | [DATA_NEEDED: charge-pump capacitor count and values] |