ADM232LJRZ vs MAX232ACSE+T 비교

다음의 상세 나란히 비교: ADM232LJRZ 제조: Analog Devices 및 MAX232ACSE+T 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 ADM232LJRZ MAX232ACSE+T
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Transceiver Configuration 2 drivers / 2 receivers —
인터페이스 유형 Full-duplex RS-232 —
Supply Voltage Range 4.5 V to 5.5 V —
Nominal Supply Voltage 5 V —
Maximum Data Rate 120 kbps —
Transmitter Output Swing ±9 V from a 5 V supply —
Charge-Pump Capacitor Value 1 µF —
Protocol Compliance EIA-232-E and V.28 —
패키지 16-pin SOIC, 7.50 mm width 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
실장 유형 Surface mount Surface Mount
Shipping Packaging Tube —
On-Board DC-to-DC Converter Yes —
Logic Compatibility CMOS —
동작 온도 범위 [DATA_NEEDED: operating temperature range] —
공급 전류 [DATA_NEEDED: supply current] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
RoHS 상태 [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
기능 — RS-232 Transceiver (2 Driver / 2 Receiver)
데이터 속도 — 200 kbps
공급 전압 — 4.5 V to 5.5 V
Number of Drivers — 2
Number of Receivers — 2
Duplex — Full
Receiver Input Voltage Range — ±30 V (HBM ESD tolerance on RS-232 inputs)
동작 온도 — 0 °C to +70 °C (C grade)
Charge Pump Capacitors — 4 x 0.1 µF external (typical)
Shutdown Mode — Yes (active-low, device-dependent)
MSL 레벨 — [DATA_NEEDED: MSL level]
Packaging — Tape & Reel (+T suffix)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청