ADM3491AR vs ADM3491EARZ 비교
다음의 상세 나란히 비교: ADM3491AR 제조: Analog Devices 및 ADM3491EARZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
ADM3491EARZ - 3.3V Full-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM3491EARZ ⚠ 최종 구매사양 비교
| 파라미터 | ADM3491AR | ADM3491EARZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface Transceivers |
| 수명 주기 상태 | 활성 | 최종 구매 |
| Product Type | RS-485/RS-422 differential line transceiver | — |
| 공급 전압 | 3.3 V | 3.3 V |
| Maximum Data Rate | 10 Mbps | 12 Mbps |
| Driver and Receiver Count | 1 transmitter and 1 receiver | — |
| Duplex Mode | Full duplex | Full duplex |
| Input Impedance | 19 kΩ | — |
| Maximum Transceivers per Bus | 50 transceivers | — |
| 공급 전류 | 840 μA | [DATA_NEEDED: operating supply current] |
| 셧다운 전류 | 2 nA | — |
| Logic Compatibility | 5 V logic interoperable | — |
| Protection | Short-circuit protection and thermal shutdown | — |
| Transmitter Skew | 8 ns | — |
| ESD Qualification | IEC 1000-4-4, greater than 1 kV | — |
| 패키지 | 14-pin SOIC | 14-pin SOIC, 3.90 mm width |
| Package Family | SOIC-14 surface-mount package | — |
| 실장 유형 | Surface mount | Surface mount |
| 동작 온도 | [DATA_NEEDED: operating temperature range] | — |
| Package Dimensions | [DATA_NEEDED: SOIC package body dimensions] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | Compliant |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Interface Standard | — | TIA/EIA RS-485 and TIA/EIA RS-422 |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| ESD Protection | — | ±15 kV |
| Low-Power Operation | — | Low-power transceiver with shutdown mode |
| Supply Architecture | — | Single +3.3 V supply |
| Bus Configuration | — | Multipoint bus transmission line |
| Driver Enable Control | — | DE/RE control |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| Shutdown Supply Current | — | [DATA_NEEDED: shutdown supply current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Output Voltage | — | [DATA_NEEDED: differential driver output voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Halogen-Free Status | — | Compliant |