ADM485AQ vs SN75176BD 비교
다음의 상세 나란히 비교: ADM485AQ 제조: Analog Devices 및 SN75176BD 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ADM485AQ | SN75176BD |
|---|---|---|
| 브랜드 | Analog Devices | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.00 | $0.15 |
| Product Type | Differential RS-485/RS-422 line transceiver | Differential bus transceiver |
| 공급 전압 | 5 V | 5 V |
| Maximum Data Rate | 5 Mbit/s | [DATA_NEEDED: maximum data rate] |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Communication Standards | EIA RS-485 and RS-422 | — |
| 토폴로지 | Bidirectional multipoint bus transmission lines | — |
| 동작 온도 범위 | Commercial and industrial temperature range | 0 °C to 70 °C |
| 패키지 | 8-pin ceramic DIP | SOIC (D), 8 pins |
| Package Designation | AQ | — |
| Switching Speed | Extremely fast switching speed | — |
| Driver Propagation Delay | Minimal | — |
| Differential Signaling | Balanced data transmission | — |
| EMI Behavior | Low skew is designed to minimize EMI interference | — |
| 장착 스타일 | Through-hole | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| 실장 유형 | — | Surface mount |
| 핀 수 | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |