ADM489ARZ vs ADM489ABRZ 비교
다음의 상세 나란히 비교: ADM489ARZ 제조: Analog Devices 및 ADM489ABRZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
ADM489ARZ - 250 kbps Full-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM489ARZ ✓ 활성사양 비교
| 파라미터 | ADM489ARZ | ADM489ABRZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Number of Drivers/Receivers | 1/1 | — |
| Transceiver Type | Full-duplex differential line transceiver | — |
| Supported Protocols | RS-422, RS-485 | — |
| Standard Compliance | EIA RS-485 and EIA RS-422 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| 데이터 속도 | 250 kbps | — |
| Edge Rate Control | Slew-rate limited | — |
| Supply Variation Tolerance | +/-10% | — |
| 패키지 / 케이스 | 14-SOIC (0.154 in, 3.90 mm width) | — |
| Packaging | Tube | — |
| 실장 유형 | Surface Mount | Surface Mount |
| Driver Enable | Active-high DE input | — |
| Receiver Enable | Active-low /RE input | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection] |
| Bus Fault Protection | [DATA_NEEDED: bus fault protection rating] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | Differential Line Transceiver |
| Standards Compliance | — | EIA RS-485 and RS-422 |
| 동작 공급 전압 | — | 5 V |
| Maximum Data Rate | — | 250 kbps |
| Duplex Mode | — | Full Duplex |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Output Driver Type | — | Slew Rate Limited |
| Transmission Type | — | Balanced Differential |
| Bus Configuration | — | Multipoint Bus Transmission Line |
| Power Class | — | Low Power |
| 패키지 | — | 14-lead SOIC |
| 공급 전류 | — | [DATA_NEEDED: supply current] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |