ADUM140D1BRZ-RL7 vs ADUM140D1BRZ 비교
다음의 상세 나란히 비교: ADUM140D1BRZ-RL7 제조: Analog Devices 및 ADUM140D1BRZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
ADUM140D1BRZ-RL7 - 150Mbps Quad Digital Isolator | Analog Devices
ADUM140D1BRZ-RL7 ✓ 활성사양 비교
| 파라미터 | ADUM140D1BRZ-RL7 | ADUM140D1BRZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $4.42 | $2.99 |
| 기능 | Quad-channel digital isolator (4:0 unidirectional) | — |
| Technology | iCoupler (CMOS + monolithic air-core transformer) | iCoupler (CMOS transformer-based) |
| Number of Channels | 4 | 4 |
| Channel Configuration | 4/0 (4 forward, 0 reverse) | — |
| Data Rate (Maximum) | 150 Mbps | — |
| Propagation Delay (Typical) | 13 ns | — |
| Pulse-Width Distortion (Maximum) | 3 ns | — |
| Channel-to-Channel Matching (Maximum) | 3 ns | — |
| Common-Mode Transient Immunity (CMTI) | 75 kV/us (minimum) | 75 kV/us |
| Withstand Isolation Voltage | 3000 Vrms | — |
| Supply Voltage (VDD1, VDD2) | 1.8 V to 5 V (3.0 V to 5.5 V absolute maximum) | — |
| Supply Current (per channel, typical @5 V) | 11 mA | — |
| Fail-Safe Option | Output high (suffix '1') when input unpowered | — |
| 동작 온도 | -40C to +125C | -40C to +125C |
| 패키지 | 16-SOIC (wide-body, 0.154" / 3.90 mm width) | 16-SOIC (0.154", 3.90 mm Width) |
| 실장 유형 | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (RL7 = 1000 pcs) | — |
| RoHS 상태 | Compliant | Compliant |
| Isolation Voltage (rms) | — | 3000 Vrms |
| Channel Direction | — | 4:0 (4 forward / 0 reverse) |
| Maximum Data Rate | — | 150 Mbps |
| Propagation Delay (typical) | — | 10 ns |
| Fail-Safe Output State | — | Default Low (Channel option "1") |
| Supply Voltage (side 1 / side 2) | — | 2.5 V to 5.5 V (each side) |
| MSL 레벨 | — | [DATA_NEEDED: MSL Level] |
| UL 1577 / IEC 60747-17 Certification | — | Reinforced isolation, 3 kV rms (per UL 1577) |
| Output Drive Capability | — | [DATA_NEEDED: Output drive strength] |