ATMEGA8515L-8PC vs ATMEGA8515L-8PI 비교
다음의 상세 나란히 비교: ATMEGA8515L-8PC 제조: Microchip Technology 및 ATMEGA8515L-8PI 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATMEGA8515L-8PC - 8-bit AVR MCU 8KB Flash 40-PDIP | Microchip
ATMEGA8515L-8PC ✓ 활성Microchip Technology
ATMEGA8515L-8PI - 8-bit AVR MCU 8KB Flash 40-DIP | Microchip
ATMEGA8515L-8PI ✓ 활성사양 비교
| 파라미터 | ATMEGA8515L-8PC | ATMEGA8515L-8PI |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $3.65 | $3.45 |
| Core Processor | AVR | — |
| Core Size | 8-Bit | — |
| Speed | 8 MHz | — |
| Flash Memory | 8 KB (4K x 16) | — |
| EEPROM | 512 B | 512 B |
| SRAM | 544 B internal + up to 64 KB external | — |
| Connectivity | EBI/EMI, SPI, UART/USART | — |
| Peripherals | External Memory Interface, SPI, UART/USART, Timer/PWM | — |
| Number of I/O | [DATA_NEEDED: Number of I/O pins] | — |
| Operating Voltage | [DATA_NEEDED: Operating voltage range] | — |
| 동작 온도 | 0C ~ 70C (TA) | -40C to +85C (Industrial) |
| 패키지 | 40-PDIP (0.600", 15.24mm) | 40-PDIP (0.600 in, 15.24 mm) |
| 실장 유형 | Through Hole | Through Hole |
| Packaging | Tube | — |
| Instruction Set | 130 powerful instructions, most single-cycle | 130 instructions, most single-cycle |
| Throughput | Up to 8 MIPS at 8 MHz | Up to 8 MIPS at 8 MHz |
| Programmability | 8 KB In-System Programmable (self-programming) Flash | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Core Architecture | — | 8-bit AVR enhanced RISC |
| Flash Program Memory | — | 8 KB (4K x 16), In-System Programmable |
| Internal SRAM | — | 512 B |
| External Memory Support | — | Up to 64 KB SRAM |
| General Purpose I/O | — | 35 programmable I/O lines |
| 최대 클록 주파수 | — | 8 MHz |
| Operating Voltage Range | — | 2.7 V to 5.5 V |
| Timers | — | One 16-bit (T1) and 8-bit Timer/Counters |
| Serial Interfaces | — | 1x USART, 1x SPI |
| External Interrupts | — | 3 (INT0-INT2) |
| Internal ADC | — | No |
| Debug/Programming | — | ISP via SPI; debug via MPLAB SNAP |
| Supply Current (Active) | — | [DATA_NEEDED: active supply current] |