ATSAM4S8CB-AN vs ATSAM4S16CB-CFN 비교
다음의 상세 나란히 비교: ATSAM4S8CB-AN 제조: Microchip Technology 및 ATSAM4S16CB-CFN 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAM4S8CB-AN - 120MHz Cortex-M4 MCU 512KB Flash | Microchip
ATSAM4S8CB-AN ✓ 활성Microchip Technology
ATSAM4S16CB-CFN - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4S16CB-CFN ✓ 활성사양 비교
| 파라미터 | ATSAM4S8CB-AN | ATSAM4S16CB-CFN |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $4.20 | $4.95 |
| Core Architecture | ARM Cortex-M4 (32-bit RISC) | — |
| 최대 클록 주파수 | 120 MHz | 120 MHz |
| Flash Memory | 512 KB | — |
| SRAM | 128 KB | — |
| Supply Voltage Range | 1.62 V to 3.6 V | — |
| 동작 온도 범위 | -40C to +105C (extended temp) | — |
| 패키지 | 100-pin LQFP (14x14 mm) | 100-VFBGA (7x7 mm) |
| 실장 유형 | Surface Mount | Surface Mount |
| ADC | 10-bit, up to 1 Msps | — |
| USB | USB 2.0 Full-Speed Device/Host | — |
| CAN Controllers | 2 | — |
| UART / SPI / I2C | 3 UART / 2 SPI / 2 I2C | — |
| Peripheral Touch Controller | Yes (PTC) | — |
| External Bus Interface | Yes (EBI) | — |
| DMA Channels | Peripheral DMA controller | — |
| Power Consumption | 200 uA/MHz dynamic, 30 mA @ 100 MHz, 3 uA back-up (RTC) | — |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| RoHS 상태 | ROHS3 Compliant | Green (RoHS compliant per Mouser listing) |
| Lead-Free | Yes | — |
| Core Processor | — | ARM Cortex-M4 |
| Core Size | — | 32-Bit Single-Core |
| Flash Memory Size | — | 1 MB (1M x 8) |
| Flash Architecture | — | Dual-Bank with ECC, Security Bit and Lock |
| SRAM Size | — | 128 KB |
| Instruction Set | — | Thumb-2, DSP Instructions |
| Memory Protection | — | MPU (Memory Protection Unit) |
| Series | — | SAM4S (ATSAM4S16) |
| Pin-to-Pin Compatibility | — | SAM7S, SAM3N, SAM3S MCUs |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| 공급 전압 | — | [DATA_NEEDED: supply voltage range] |
| Number of I/O | — | [DATA_NEEDED: number of GPIO] |
| Peripherals | — | [DATA_NEEDED: peripheral list] |