ATSAM4SD32CA-CU vs ATSAM4SD16CA-CUR 비교
다음의 상세 나란히 비교: ATSAM4SD32CA-CU 제조: Microchip Technology 및 ATSAM4SD16CA-CUR 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAM4SD32CA-CU - 120MHz Cortex-M4 MCU 2MB Flash 100-TFBGA | Microchip
ATSAM4SD32CA-CU ✓ 활성Microchip Technology
ATSAM4SD16CA-CUR - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4SD16CA-CUR ✓ 활성사양 비교
| 파라미터 | ATSAM4SD32CA-CU | ATSAM4SD16CA-CUR |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $8.62 | $5.55 |
| Core Architecture | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU |
| 최대 클록 주파수 | 120 MHz | — |
| Instruction Cache | 2 KB | — |
| Program Memory (Flash) | 2 MB (2M x 8) | 1 MB (2 x 512 KB dual-bank) |
| SRAM | 160 KB | 160 KB |
| Supply Voltage Range | 1.62 V to 3.6 V | — |
| 패키지 | 100-ball TFBGA (9x9 mm) | 100-TFBGA (9 x 9 mm) |
| 동작 온도 범위 | -40 C to +85 C (industrial) | — |
| ADC | 10-bit, up to 16 channels, 1 MSps | 12-bit, up to 24 channels |
| USB Interface | USB 2.0 Full-Speed Device/Host/OTG | — |
| CAN | 2 x CAN 2.0A/B | — |
| USART | 3 x USART | — |
| TWI (I2C-compatible) | 2 x TWI | — |
| SPI | 2 x SPI | — |
| Memory Protection Unit (MPU) | Yes | — |
| DSP Extensions | Yes (single-precision FPU + MAC) | — |
| Pin-to-Pin Compatibility | SAM3N, SAM3S, SAM7S legacy 64/100-pin variants | — |
| 실장 유형 | Surface Mount (TFBGA) | Surface Mount (BGA) |
| RoHS 상태 | Compliant | Compliant |
| Core Bit Width | — | 32-bit |
| Maximum CPU Clock | — | 120 MHz |
| Supply Voltage (VDD) | — | 1.62 V to 3.6 V |
| I/O Voltage | — | 1.62 V to 3.6 V |
| 동작 온도 | — | -40 °C to +85 °C (Industrial) |
| Communication Interfaces | — | USB 2.0 Full-Speed, 2 x CAN, USART/UART, SPI, TWI (I²C), HSMCI |
| PWM / Timer | — | 16-bit, multi-channel |
| DMA | — | Peripheral DMA Controller (PDC) |
| Trace | — | Embedded Trace Macrocell (ETM) + SWD |
| MSL 레벨 | — | MSL3 (per JEDEC J-STD-020) |