ATSAMA5D26A-CU vs ATSAMA5D24A-CU 비교
다음의 상세 나란히 비교: ATSAMA5D26A-CU 제조: Microchip Technology 및 ATSAMA5D24A-CU 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMA5D26A-CU - Cortex-A5 MPU 500MHz | 289-LFBGA | Microchip
ATSAMA5D26A-CU ✓ 활성Microchip Technology
ATSAMA5D24A-CU - ARM Cortex-A5 MPU 500MHz 256-TFBGA | Microchip
ATSAMA5D24A-CU ✓ 활성사양 비교
| 파라미터 | ATSAMA5D26A-CU | ATSAMA5D24A-CU |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $16.10 | $9.85 |
| Core | Arm Cortex-A5 (single-core) | — |
| Maximum CPU Clock | 500 MHz | — |
| Architecture | ARMv7-A | — |
| Internal SRAM | 128 KB | — |
| External Memory Bus | DDR2/DDR3L/LPDDR2/LPDDR3, 16-bit | — |
| Boot Memory | QSPI, e.MMC, NAND Flash | — |
| 패키지 | 289-LFBGA, 14x14 mm, 0.8 mm pitch | 256-TFBGA (8x8 mm) |
| 동작 온도 | -40C to +85C (industrial) | -40C to +85C |
| I/O Voltage Rails | 1.2 V, 1.8 V, 3.3 V | — |
| USB Ports | 3x USB 2.0 (1 HSIC, 2 host/device) | — |
| Ethernet | 10/100 Mbps MAC (GMII/RMII/MII) | 10/100 Mbps (1) |
| CAN | 2x CAN-FD | — |
| Display Controller | LCD with resistive/capacitive touchscreen I/F | — |
| Cryptography | AES, SHA-256, TRNG, secure boot | AES, SHA, AES-OTF, Secure Boot |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| RoHS 상태 | Compliant | Compliant |
| Manufacturer | — | Microchip Technology |
| Series | — | SAMA5D2 |
| Core Processor | — | ARM Cortex-A5 |
| Core Count | — | 1 |
| 데이터 버스 폭 | — | 32-bit |
| Maximum Clock Speed | — | 500 MHz |
| On-chip SRAM | — | 128 KB |
| Instruction Cache | — | 32 KB |
| Data Cache | — | 32 KB |
| Memory Controllers | — | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| Graphics Acceleration | — | Yes (LCD controller) |
| NEON SIMD Engine | — | Yes |
| Floating Point Unit | — | Single-precision FPU |
| Touch Controller | — | Peripheral Touch Controller (PTC) |
| USB | — | USB 2.0 + HSIC |
| Backup Mode Current | — | 5 uA (typical) |
| I/O Voltage | — | 1.2 V, 1.8 V, 3.3 V |