ATSAMA5D3-XPLD vs ATSAMA5D35-EK 비교
다음의 상세 나란히 비교: ATSAMA5D3-XPLD 제조: Microchip Technology 및 ATSAMA5D35-EK 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMA5D3-XPLD - SAMA5D3 Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D3-XPLD ⚠ 최종 구매Microchip Technology
ATSAMA5D35-EK - SAMA5D35 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D35-EK ✓ 활성사양 비교
| 파라미터 | ATSAMA5D3-XPLD | ATSAMA5D35-EK |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Development Boards | Development Boards |
| 수명 주기 상태 | 최종 구매 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $105.90 | $629.00 |
| Product Type | Embedded Evaluation Board (Xplained Kit) | MPU Evaluation Board / Development Kit |
| Target MPU | ATSAMA5D36 (ARM Cortex-A5) | — |
| Core | ARM Cortex-A5 with FPU | — |
| Maximum CPU Clock | 536 MHz | 536 MHz |
| On-chip SRAM | 128 KB | — |
| Cache (I/D) | 32 KB each | — |
| External Memory Interface | DDR2 / LPDDR / LPDDR2 + NAND Flash + QSPI | — |
| Graphics Output | HDMI + parallel LCD | — |
| Ethernet | 2x 10/100/1000 GMAC | 2x 10/100/1000 Mbps MAC (GMII/RGMII), IEEE 1588 |
| USB | 1x USB 2.0 Device, 2x USB 2.0 Host | 2x USB 2.0 High-Speed Host + 1x USB 2.0 High-Speed Device |
| CAN | 2x CAN 2.0B | 2x CAN-FD controllers |
| Storage | microSD slot + NAND Flash on-board | — |
| Expansion Headers | Arduino R3 + Xplained extension header | — |
| Debug Interface | On-board J-Link-OB (JTAG + SWD) + serial console | — |
| Operating System Support | Linux Mainline, Yocto Project, bare-metal C examples | — |
| Included Accessories | micro-AB to Type-A USB cable | — |
| 동작 온도 | 0C to +70C (commercial evaluation use) | — |
| Compliance | RoHS Compliant | — |
| MPU Series | — | SAMA5D3 (ARM Cortex-A5) |
| Core Processor | — | ARM Cortex-A5 32-bit |
| Performance | — | 850 DMIPS |
| Internal SRAM | — | 128 KB |
| L1 Instruction Cache | — | 32 KB |
| L1 Data Cache | — | 32 KB |
| Floating Point Unit | — | Yes (VFPv4 + NEON) |
| On-board DRAM | — | 512 MB DDR2 |
| Flash Memory | — | 256 MB NAND + 16 MB NOR + 4 MB SPI DataFlash + 64 KB EEPROM |
| LCD Controller | — | Integrated, supports up to 1920x1080 (HDMI bridge on board) |
| Cryptography | — | AES, SHA, TRNG hardware accelerators |
| Low-Power Mode Consumption | — | < 0.5 mW |
| Operating Temperature (industrial variants) | — | -40 C to +105 C |
| MPU Package (silicon) | — | 324-ball BGA, 12 x 12 mm, 0.5 mm pitch |
| Board Form Factor | — | SAMA5D3-EK baseboard + SAMA5D35 module |
| Software Support | — | Linux (mainline kernel, Yocto, Buildroot), SAM-BA bootloader, bare-metal |
| Kit Contents | — | Board, cables, power supply |
| RoHS 상태 | — | Compliant |
| Lead-Free | — | Yes |