ATSAMB11-XR210PA vs ATSAMB11-MR210CA 비교
다음의 상세 나란히 비교: ATSAMB11-XR210PA 제조: Microchip Technology 및 ATSAMB11-MR210CA 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMB11-XR210PA - Bluetooth SiP Module w/ Antenna | Microchip
ATSAMB11-XR210PA ✓ 활성Microchip Technology
ATSAMB11-MR210CA - BLE 4.1 Module, 2.4GHz, Chip Antenna | Microchip
ATSAMB11-MR210CA Obsolete사양 비교
| 파라미터 | ATSAMB11-XR210PA | ATSAMB11-MR210CA |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | RF Modules | RF Modules |
| 수명 주기 상태 | 활성 | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.85 | $6.85 |
| Product Type | RF System on a Chip / Module (SoC) | — |
| Bluetooth Specification | Bluetooth 4.1 Low Energy (BLE) | — |
| Operating Frequency | 2.402 GHz to 2.480 GHz (ISM band) | — |
| Antenna Configuration | Integrated chip antenna (mounted on top of SiP) | — |
| Core Processor | ARM Cortex-M0 | — |
| Module Type | SmartConnect ATSAMB11 SiP Module | Transceiver Module (BLE SoC + antenna) |
| Package Type | SiP Module, surface mount | — |
| RF Modulation | GFSK | — |
| TX Power | [DATA_NEEDED: TX power dBm] | — |
| RX Sensitivity | [DATA_NEEDED: RX sensitivity dBm] | — |
| Operating Voltage | [DATA_NEEDED: VDD range] | — |
| 동작 온도 | [DATA_NEEDED: temperature range] | [DATA_NEEDED: operating temperature range] |
| 실장 유형 | Surface Mount | Surface Mount |
| RoHS 상태 | ROHS3 Compliant | [DATA_NEEDED: RoHS status] |
| Stock Quantity (Full-Electronic) | 4187 units | — |
| Protocol | — | Bluetooth v4.1 (BLE) |
| Frequency Band | — | 2.4 GHz ISM (2402-2480 MHz) |
| Supply Voltage Range | — | 2.3 V to 3.6 V |
| RX Current (typical) | — | 4 mA |
| TX Current (typical) | — | 3 mA |
| Antenna | — | Integrated chip antenna |
| Host Interfaces | — | I2C, SPI, UART |
| Integrated Silicon | — | ATSAMB11A BLE SoC |
| RF Certification | — | Module-level pre-certified (per manufacturer) |
| 패키지 | — | Surface-mount module with integrated chip antenna |
| 핀 수 | — | [DATA_NEEDED: pin count] |