ATSAMD20J15B-MUT vs ATSAMD20J15A-CU 비교
다음의 상세 나란히 비교: ATSAMD20J15B-MUT 제조: Microchip Technology 및 ATSAMD20J15A-CU 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMD20J15B-MUT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip
ATSAMD20J15B-MUT ✓ 활성Microchip Technology
ATSAMD20J15A-CU - ARM Cortex-M0+ MCU, 48MHz, 32KB Flash, 64-UFBGA | Microchip
ATSAMD20J15A-CU ✓ 활성사양 비교
| 파라미터 | ATSAMD20J15B-MUT | ATSAMD20J15A-CU |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.85 | $2.05 |
| Core Architecture | ARM Cortex-M0+ (32-bit) | ARM Cortex-M0+ (32-bit) |
| 최대 클록 주파수 | 48 MHz | — |
| Program Flash Memory | 32 KB (32K x 8) | — |
| SRAM | 4 KB | 4 KB |
| Operating Voltage Range | 1.62 V to 3.63 V | 1.62 V to 3.63 V |
| 동작 온도 범위 | -40 C to +85 C (Industrial) | — |
| Package Type | 64-VQFN with Exposed Pad (9x9 mm) | — |
| Number of I/O Pins | [DATA_NEEDED: GPIO count] | — |
| ADC | 12-bit, up to 350 ksps | 12-bit, up to 20 channels, 350 ksps |
| ADC Channels | [DATA_NEEDED: ADC channel count] | — |
| SERCOM Modules | Up to 6 (configurable I2C/SPI/UART) | — |
| USB Interface | USB 2.0 Full-Speed Device | — |
| Timer/Counters | [DATA_NEEDED: TC count details] | — |
| Touch Sensing (PTC) | Supported (Peripheral Touch Controller) | — |
| Event System Channels | 8 | — |
| 실장 유형 | Surface Mount (Tape & Reel) | Surface Mount |
| RoHS 상태 | Compliant (Green / lead-free) | — |
| Family | — | SAM D20J |
| Maximum CPU Frequency | — | 48 MHz |
| Flash Memory | — | 32 KB (32K x 8) |
| DAC | — | 10-bit |
| SERCOM Channels | — | 6 (configurable USART/I2C/SPI) |
| USB | — | USB 2.0 Full-Speed Device |
| Peripheral Touch Controller (PTC) | — | 256 channels |
| RTC | — | Yes, with calendar mode |
| 동작 온도 | — | -40C to +85C (industrial) |
| 패키지 | — | 64-ball UFBGA (5x5 mm) |
| Lead-Free / RoHS | — | Lead-free, RoHS compliant |
| Moisture Sensitivity Level | — | MSL3 (per JEDEC J-STD-020) |
| Programming Interface | — | SWD / 2-wire PDI / Bootloader |