ATSAMD20J16A-MN vs ATSAMD20J16A-AUT 비교
다음의 상세 나란히 비교: ATSAMD20J16A-MN 제조: Microchip Technology 및 ATSAMD20J16A-AUT 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMD20J16A-MN - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20J16A-MN ✓ 활성Microchip Technology
ATSAMD20J16A-AUT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20J16A-AUT ✓ 활성사양 비교
| 파라미터 | ATSAMD20J16A-MN | ATSAMD20J16A-AUT |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.40 | $2.40 |
| Core | ARM Cortex-M0+ (32-bit) | — |
| Maximum CPU Clock | 48 MHz | — |
| Flash Memory | 64 KB (64K x 8) | — |
| SRAM | 8 KB | 8 KB |
| Operating Voltage (VDD) | 1.62 V to 3.63 V | — |
| 패키지 | 64-pin QFN (9x9 mm), industrial temp grade | 64-pin TQFP with exposed pad (10x10 mm) |
| GPIO Count | 52 | [DATA_NEEDED: GPIO count] |
| ADC | 12-bit SAR, up to 12 channels, 350 ksps | 12-bit, up to 1 MSPS |
| DAC | 10-bit, 1 channel | — |
| USB | USB 2.0 Full-Speed Device | — |
| Serial Interfaces (SERCOM) | 6 (configurable as UART/SPI/I2C) | — |
| Timers | Six 16-bit TC, three 24-bit TCC | TC (16-bit), TCC (24-bit PWM) |
| DMA Channels | 6 | 12 channels |
| RTC | Yes, with 32.768 kHz crystal support | — |
| Peripheral Touch Controller (PTC) | Yes, capacitive touch support | — |
| 동작 온도 | -40C to +105C (industrial) | -40 C to +85 C (Industrial) |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | 3 (168 hours) | MSL3 (per JEDEC J-STD-020) |
| RoHS 상태 | Compliant | Compliant |
| Core Architecture | — | ARM Cortex-M0+ (ARMv6-M) |
| Core Clock Speed | — | 48 MHz |
| Program Memory (Flash) | — | 64 KB (64K x 8) |
| Supply Voltage (VDD) | — | 1.62 V to 3.63 V |
| Communication Interfaces | — | SERCOM (UART/SPI/I2C), USB 2.0 Full-Speed Device |
| Debug Interface | — | SWD (Single-Wire Debug) |
| Packaging | — | Tape & Reel (suffix -AUT) |
| Series | — | SAM D20J |