ATSAMD21-XPRO vs ATSAMD21E18A-MF 비교
다음의 상세 나란히 비교: ATSAMD21-XPRO 제조: Microchip Technology 및 ATSAMD21E18A-MF 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMD21-XPRO - SAM D21 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMD21-XPRO ✓ 활성Microchip Technology
ATSAMD21E18A-MF - 256KB Flash ARM Cortex-M0+ MCU | Microchip
ATSAMD21E18A-MF ✓ 활성사양 비교
| 파라미터 | ATSAMD21-XPRO | ATSAMD21E18A-MF |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Development Boards | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $36.25 | $6.95 |
| Product Type | Evaluation Board (Xplained Pro) | — |
| Target MCU | ATSAMD21J18A | — |
| Core Processor | ARM Cortex-M0+ 32-bit | — |
| CPU Max Frequency | 48 MHz | — |
| Flash Memory (on-chip) | 256 KB | — |
| SRAM | 32 KB | 32 KB |
| On-board SPI Flash | 1 MB | — |
| Low-frequency Crystal | 32.768 kHz | — |
| High-frequency Crystal | 12 MHz | — |
| Debug Interface | nEDBG (CMSIS-DAP) on-board | — |
| USB Connectors | 1x Micro-B (debug/CDC), 1x Micro-B (target) | — |
| Extension Headers | 3x 20-pin Xplained Pro (compatible with I/O1, OLED1, QT1, PROTO1) | — |
| User Inputs | 1x mechanical reset button, 1x user touch button | — |
| User Outputs | 1x user LED | — |
| Arduino-compatible Headers | Yes (subset of ATSAMD21J18A I/O) | — |
| Operating Voltage (target) | 3.3 V | — |
| Board Power Source | USB Micro-B | — |
| Supported IDEs | MPLAB X IDE, Atmel Studio 7, Atmel START | — |
| RoHS 상태 | Compliant | Compliant |
| Form Factor | Xplained Pro standard (approx 88 mm x 53 mm) | — |
| Core Architecture | — | ARM Cortex-M0+ (32-bit) |
| Series | — | SAM D21E |
| 최대 클록 주파수 | — | 48 MHz |
| Flash Memory | — | 256 KB |
| Operating Voltage Range | — | 1.6 V to 3.6 V |
| 동작 온도 범위 | — | -40C to +125C |
| 패키지 | — | 32-pin QFN (5x5 mm) |
| CoreMark Performance | — | 2.46 CoreMark/MHz |
| ADC | — | 12-bit, up to 20 channels |
| DAC | — | 10-bit |
| USB | — | USB 2.0 Full-Speed Device |
| SERCOM Interfaces | — | 6 configurable (I2C/SPI/UART) |
| DMAC Channels | — | 6 |
| Peripheral Touch Controller (PTC) | — | Yes |
| 실장 유형 | — | Surface Mount |