ATSAMD21G17D-AUT vs ATSAMD21G18A-AU 비교
다음의 상세 나란히 비교: ATSAMD21G17D-AUT 제조: Microchip Technology 및 ATSAMD21G18A-AU 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMD21G17D-AUT - ARM Cortex-M0+ 48MHz 128KB MCU | Microchip
ATSAMD21G17D-AUT ✓ 활성Microchip Technology
ATSAMD21G18A-AU - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAMD21G18A-AU ✓ 활성사양 비교
| 파라미터 | ATSAMD21G17D-AUT | ATSAMD21G18A-AU |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.78 | $2.78 |
| Core | ARM Cortex-M0+ (32-bit, single-core) | ARM Cortex-M0+ (32-bit) |
| CPU Family | SAM D21G (Functional Safety) | — |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| Program Flash | 128 KB (128K x 8) | — |
| SRAM | 16 KB | 32 KB |
| RWW Flash Section | 4 KB | — |
| 패키지 | 48-TQFP (7x7 mm) | 48-pin TQFP (7x7 mm) |
| 실장 유형 | Surface Mount (Tape & Reel) | Surface Mount |
| Operating Voltage (VDDIN) | 1.62 V to 3.63 V | — |
| 동작 온도 | -40C to +85C (Industrial) | — |
| ADC | 12-bit SAR, up to 20 channels, 350 ksps | 14-channel, 12-bit |
| DAC | 10-bit, 1 channel | 10-bit |
| USB | Full-Speed USB 2.0 Device with integrated PHY | — |
| SERCOM Channels | Up to 6 (configurable as I2C/SPI/UART) | — |
| Timers/Counters | TC x3, TCC x3 | — |
| RTC | 32.768 kHz RTC with calendar mode | — |
| RoHS 상태 | Compliant | Compliant (Green package) |
| MSL 레벨 | 3 (per JEDEC J-STD-020) | — |
| Series | — | SAM D21G (Functional Safety / FuSa) |
| CoreMark/MHz | — | 2.46 |
| Flash Memory | — | 256 KB (256K x 8) |
| Operating Voltage Range | — | 1.62 V to 3.63 V |
| Programmable I/O Pins | — | Up to 52 |
| Peripheral Touch Controller (PTC) | — | Up to 256 channels (capacitive touch/proximity) |
| DMAC Channels | — | 12 |
| Event System Channels | — | 12 |
| Timer/Counters | — | Up to five 16-bit |
| Communication Peripherals (SERCOM) | — | Configurable as USART / SPI / I2C |
| Debug Interface | — | Serial Wire Debug (SWD), 2-pin |
| Sleep Modes | — | Idle, Standby with SleepWalking |