ATSAMD51J20A-MUT-EFP vs ATSAMD51G19A-MFT 비교
다음의 상세 나란히 비교: ATSAMD51J20A-MUT-EFP 제조: Microchip Technology 및 ATSAMD51G19A-MFT 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMD51J20A-MUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash 64-VQFN | Microchip
ATSAMD51J20A-MUT-EFP ✓ 활성Microchip Technology
ATSAMD51G19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51G19A-MFT ✓ 활성사양 비교
| 파라미터 | ATSAMD51J20A-MUT-EFP | ATSAMD51G19A-MFT |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.43 | $4.02 |
| Core | ARM Cortex-M4F with FPU | ARM Cortex-M4F with FPU and DSP instructions |
| 최대 클록 주파수 | 120 MHz | — |
| Flash Memory | 1 MB (dual-panel with ECC) | 512 KB (dual-panel with ECC) |
| SRAM | 256 KB (with ECC) | 192 KB (with ECC) |
| 패키지 | 64-VQFN (9x9 mm) with exposed pad | 48-pin VQFN (7x7 mm) |
| 공급 전압 | 1.71 V to 3.63 V | — |
| 동작 온도 | -40 C to +85 C (industrial) | -40C to +125C (extended industrial) |
| USB Interface | USB 2.0 Full-Speed with integrated PHY | — |
| CAN-FD | Yes | — |
| ADC | 12-bit, up to 16 channels | 12-bit, up to 1 Msps, up to 16 channels |
| DAC | 12-bit, 2 channels | 10-bit, 300 ksps |
| SERCOM | 8 configurable serial interfaces (UART/SPI/I2C) | — |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | [DATA_NEEDED: MSL level] | 3 (168 hours) |
| RoHS 상태 | Compliant | Compliant |
| ECC Support | Yes (Flash + SRAM) | — |
| DMA Channels | [DATA_NEEDED: number of DMA channels] | — |
| I/O Pins | [DATA_NEEDED: GPIO count] | — |
| Maximum CPU Clock | — | 120 MHz |
| Operating Voltage (VDDIO) | — | 1.71 V to 3.63 V |
| USB | — | USB 2.0 Full-Speed device and host (integrated PHY) |
| SERCOM Modules | — | 6 (each configurable as UART/SPI/I2C) |
| Timers | — | 16-bit TC, 32-bit TCC |
| CAN | — | CAN-FD controller |
| External Bus Interface | — | QSPI / SERCOM-based |