ATSAME51G18A-MU-EFP vs ATSAMD51G18A-MUT-EFP 비교

다음의 상세 나란히 비교: ATSAME51G18A-MU-EFP 제조: Microchip Technology 및 ATSAMD51G18A-MUT-EFP 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Microchip Technology
ATSAME51G18A-MU-EFP ATSAME51G18A-MU-EFP - SAM E51 120MHz Cortex-M4F MCU | Microchip

ATSAME51G18A-MU-EFP - SAM E51 120MHz Cortex-M4F MCU | Microchip

ATSAME51G18A-MU-EFP ✓ 활성
Microchip Technology
ATSAMD51G18A-MUT-EFP ATSAMD51G18A-MUT-EFP - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

ATSAMD51G18A-MUT-EFP - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

ATSAMD51G18A-MUT-EFP ✓ 활성

사양 비교

파라미터 ATSAME51G18A-MU-EFP ATSAMD51G18A-MUT-EFP
브랜드 Microchip Technology Microchip Technology
카테고리 Microcontrollers Microcontrollers
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $5.14 $4.42
Core ARM Cortex-M4F with single-precision FPU and DSP instructions ARM Cortex-M4F (32-bit, single-precision FPU, DSP extensions)
Maximum CPU Frequency 120 MHz —
Program Flash Memory 256 KB (256K x 8) with ECC, dual-panel —
SRAM 256 KB with ECC 128 KB (ECC)
Operating Voltage Range 1.71 V to 3.63 V 1.71 V to 3.63 V
ADC 12-bit, up to 1 MSPS 12-bit, up to 1 MSPS, 16 channels
USB USB 2.0 Full-Speed Device and Host USB 2.0 Full-Speed PHY (device/host)
CAN CAN 2.0B and CAN-FD —
SERCOM Modules Configurable as UART/SPI/I2C (peripheral count allowed) —
DMA Channels 32 —
Timers/Counters 8 (TC) plus 5 SCC, 4 TCC —
패키지 48-VQFN (7x7 mm) with exposed pad 48-pin VQFN (7x7 mm)
동작 온도 범위 -40 C to +125 C (industrial) —
실장 유형 Surface Mount Surface Mount
MSL 레벨 3 (per JEDEC J-STD-020) 3 (168 hours)
RoHS 상태 Compliant Compliant
Series SAM E51 —
Maximum Clock Speed — 120 MHz
Flash Memory — 256 KB (dual-bank, ECC)
DAC — 2x 12-bit, 1 MSPS
SERCOM — 6 (each configurable as UART/SPI/I2C)
I2S — 1 peripheral
Cryptographic Accelerator — AES, TRNG
Peripheral Touch Controller (PTC) — Yes
Event System — Yes (inter-peripheral signaling)
RTC — 32-bit with calendar mode
동작 온도 — -40 C to +85 C (industrial)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청