ATSAMG55J19B-MUT vs ATSAMG55-XPRO 비교
다음의 상세 나란히 비교: ATSAMG55J19B-MUT 제조: Microchip Technology 및 ATSAMG55-XPRO 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMG55J19B-MUT - 120MHz Cortex-M4 MCU, 512KB Flash | Microchip
ATSAMG55J19B-MUT ✓ 활성Microchip Technology
ATSAMG55-XPRO - SAM G55 ARM Cortex-M4 Xplained Pro Kit | Microchip
ATSAMG55-XPRO ✓ 활성사양 비교
| 파라미터 | ATSAMG55J19B-MUT | ATSAMG55-XPRO |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Development Boards |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.74 | $40.25 |
| Core Architecture | ARM Cortex-M4 with FPU (single-precision) and DSP extensions | ARM 32-bit Cortex-M4 with single-precision FPU and DSP extensions |
| Maximum CPU Frequency | 120 MHz | — |
| Program Memory (Flash) | 512 KB (512K x 8) | — |
| SRAM | 176 KB | — |
| ROM (Boot Loader) | 8 KB | — |
| 공급 전압 | 1.62 V to 3.6 V (single supply) | — |
| 동작 온도 | -40 C to +85 C (Industrial, MUT suffix) | — |
| 패키지 | 64-QFN MRLB, 7.5 x 7.5 mm with exposed pad | — |
| GPIO Count | Up to 47 | — |
| USB | USB 2.0 Full-Speed Device with on-chip transceiver | — |
| Audio Interface | I2S / SSC (Synchronous Serial Controller) | — |
| Oscillators | 3 to 20 MHz crystal/ceramic resonator + 3 internal RC oscillators | — |
| Boot Loader | Embedded, supports Flash programming | — |
| Watchdog Timer | Yes | — |
| Power-on Reset / Brown-out Detector | Yes | — |
| 실장 유형 | Surface Mount | Through-hole male header pins (extension), surface-mount PCB |
| MSL 레벨 | MSL3 (per JEDEC J-STD-020) | — |
| RoHS 상태 | Compliant | Compliant (per Microchip product page) |
| Product Type | — | Evaluation / Development Kit (Xplained Pro) |
| Target MCU | — | ATSAMG55J19B (SAM G55, ARM Cortex-M4 with FPU) |
| Maximum CPU Clock | — | 120 MHz |
| Low-frequency Crystal | — | 32.768 kHz |
| Supported OS (IDE) | — | Windows 7 / Windows XP (Atmel Studio / Microchip Studio) |
| On-board Debugger | — | EDBG (USB interface, programming + debug) |
| Extension Headers | — | 2x Xplained Pro extension headers + mikroBUS socket |
| User Interface | — | Mechanical buttons, user LEDs |
| Power Input | — | USB (powered via EDBG) and external connector |
| Form Factor | — | Xplained Pro standard PCB |
| Family | — | SAM G55 Xplained Pro |
| Toolchain Support | — | Microchip Studio / Atmel Studio, ASF, GCC ARM |