BQ51013CQWRHLRQ1 vs BQ51013C-Q1 비교
다음의 상세 나란히 비교: BQ51013CQWRHLRQ1 제조: Texas Instruments 및 BQ51013C-Q1 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
BQ51013CQWRHLRQ1 - 5W WPC 1.3 Wireless Power Receiver | Texas Instruments
BQ51013CQWRHLRQ1 ✓ 활성사양 비교
| 파라미터 | BQ51013CQWRHLRQ1 | BQ51013C-Q1 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Wireless Charging ICs | Battery Management |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.74 | $1.74 |
| 기능 | Wireless Power Receiver (Qi Rx, secondary-side) | — |
| WPC Compliance | Qi v1.3 (WPC v2.0/IP-based) | — |
| Maximum Output Power | 5 W | — |
| 출력 전압 | Up to ~5 V (programmable) | — |
| Input Voltage (Coil) | AC from Rx coil, rectified internally | — |
| Rectifier Type | Integrated synchronous low-loss rectification | — |
| Foreign Object Detection (FOD) | Yes, adaptive WPC-defined FOD | — |
| Communication | Qi load modulation (back-channel to Tx) | — |
| 동작 온도 범위 | -40 C to +125 C (automotive grade 1) | — |
| 패키지 | VQFN-HR-20 (RHL), 3.5 mm x 4.5 mm | 20-pin VQFN, 3.5 mm x 4.5 mm |
| 실장 유형 | Surface Mount | — |
| MSL 레벨 | [DATA_NEEDED: MSL level] | — |
| 핀 수 | 20 | — |
| Thermal Pad | Exposed thermal pad (must be soldered) | — |
| Automotive Qualification | AEC-Q100 qualified (suffix -Q1) | Automotive product; AEC-Q100 qualification referenced by verified listing |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Communication Modulation | Adaptive (capacitive / resistive load modulation) | — |
| Product Family | BQ5101xC-Q1 (Qi v1.3 receivers) | — |
| Product Type | — | Fully integrated wireless power receiver PMIC |
| Wireless Power Standard | — | Qi v1.3 |
| Maximum Delivered Output Power | — | 5 W |
| Peak AC-DC Efficiency | — | 93% |
| Rectifier Topology | — | Full synchronous rectification |
| Integrated Functions | — | AC-to-DC conversion, LDO, digital control, voltage loop, current loop |
| Package Type | — | VQFN-20 |
| Surface-Mount Construction | — | Surface mount |
| Input Source | — | Wireless receiver coil AC input |
| Output | — | Regulated DC output |
| Communication Control | — | WPC Qi v1.3 communication protocol control |
| Voltage Conditioning | — | Output voltage conditioning |
| External IC Requirement | — | Only IC required between receiver coil and output, per verified manufacturer material |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |
| Absolute Maximum Ratings | — | [DATA_NEEDED: absolute maximum ratings] |
| Pinout | — | [DATA_NEEDED: complete manufacturer pin names and functions] |