BSP742RIXUMA1 vs BSP742RXUMA1 비교
다음의 상세 나란히 비교: BSP742RIXUMA1 제조: Infineon 및 BSP742RXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BSP742RIXUMA1 | BSP742RXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.96 | $0.81 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| 토폴로지 | 1:1 N-Channel High-Side | 1:1 N-Channel High-Side Switch |
| Family | miniPROFET | — |
| Output Current (Nominal) | 400 mA | — |
| RDS(on) Typical at 25°C | 250 mΩ | — |
| 동작 공급 전압 | 5 V to 34 V | — |
| Load Dump Tolerance | 41 V | — |
| Reverse Battery Protection | -16 V | — |
| On-State Resistance (max) | [DATA_NEEDED: RDS(on) maximum at 25°C] | — |
| 전류 제한 | [DATA_NEEDED: current limit typical value] | — |
| 열 차단 | Yes with auto restart | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Short Circuit Protection | Yes | — |
| Open Load Detection | Yes (diagnostic pin) | — |
| Demagnetization of Inductive Loads | Yes (internal) | — |
| 패키지 | PG-DSO-8-6 (SOIC-8, 3.90 mm body) | PG-DSO-8-6 (8-pin SOIC, exposed pad variant) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | -40 °C to +150 °C | -40°C to +150°C (TJ) |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| RoHS 상태 | Compliant | — |
| Operating Voltage Range (Vbb) | — | 5 V to 34 V |
| Continuous Load Current | — | 400 mA |
| On-Resistance R_DS(on) (typ) | — | 70 mΩ |
| On-Resistance R_DS(on) (max) | — | [DATA_NEEDED: R_DS(on) max value at 25C] |
| Quiescent Current (Iq typ) | — | 5 µA |
| Input Type | — | CMOS-compatible logic, active-high |
| AEC-Q100 Qualification | — | Qualified (Automotive Grade) |
| Protection Features | — | Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery |
| Diagnostic Output | — | Yes (Status / Fault feedback) |
| Inductive Load Switching | — | Fast demagnetization integrated |
| RoHS Compliance | — | Compliant |
| MSL Moisture Sensitivity Level | — | MSL 2 (per JEDEC J-STD-020) |